SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS2014

System Noise Assessment and the Potential for a Low Noise Hybrid Wing Body Aircraft with Open Rotor Propulsion

An aircraft system noise assessment was conducted for a hybrid wing body freighter aircraft concept configured with three open rotor engines. The primary objective of the study was to determine the aircraft system level noise given the significant impact of installation effects including shielding the open rotor noise by the airframe. The aircraft was designed to carry a payload of 100,000 lbs on a 6,500 nautical mile mission. An experimental database was used to establish the propulsion airframe aeroacoustic installation effects including those from shielding by the airframe planform, interactions with the control surfaces, and additional noise reduction technologies. A second objective of the study applied the impacts of projected low noise airframe technology and a projection of advanced low noise rotors appropriate for the NASA N+2 2025 timeframe. With the projection of low noise rotors and installation effects, the aircraft system level was 26.0 EPNLdB below Stage 4 level with the engine installed at 1.0 rotor diameters upstream of the trailing edge. Moving the engine to 1.5 rotor diameters brought the system level noise to 30.8 EPNLdB below Stage 4. At these locations on the airframe, the integrated level of installation effects including shielding can be as much as 20 EPNLdB cumulative in addition to lower engine source noise from advanced low noise rotors. And finally, an additional set of technology effects were identified and the potential impact at the system level was estimated for noise only without assessing the impact on aircraft performance. If these additional effects were to be included it is estimated that the potential aircraft system noise could reach as low as 38.0 EPNLdB cumulative below Stage 4.

Thomas, Russell H.↗

NASA NTRS2013

Development of an Indexing Media Filtration System for Long Duration Space Missions

The effective maintenance of air quality aboard spacecraft cabins will be vital to future human exploration missions. A key component will be the air cleaning filtration system which will need to remove a broad size range of particles including skin flakes, hair and clothing fibers, other biological matter, and particulate matter derived from material and equipment wear. In addition, during surface missions any extraterrestrial planetary dust, including dust generated by near-by ISRU equipment, which is tracked into the habitat will also need to be managed by the filtration system inside the pressurized habitat compartments. An indexing media filter system is being developed to meet the demand for long-duration missions that will result in dramatic increases in filter service life and loading capacity, and will require minimal crew involvement. These features may also benefit other closed systems, such as submarines, and remote location terrestrial installations where servicing and replacement of filter units is not practical. The filtration system consists of three stages: an inertial impactor stage, an indexing media stage, and a high-efficiency filter stage, packaged in a stacked modular cartridge configuration. Each stage will target a specific range of particle sizes that optimize the filtration and regeneration performance of the system. An 1/8th scale and full-scale prototype of the filter system have been fabricated and have been tested in the laboratory and reduced gravity environments that simulate conditions on spacecrafts, landers and habitats. Results from recent laboratory and reducegravity flight tests data will be presented.

Filtration↗

NASA NTRS2015

Development of a Near-Real Time Hail Damage Swath Identification Algorithm for Vegetation

The Midwest is home to one of the world's largest agricultural growing regions. Between the time period of late May through early September, and with irrigation and seasonal rainfall these crops are able to reach their full maturity. Using moderate to high resolution remote sensors, the monitoring of the vegetation can be achieved using the red and near-infrared wavelengths. These wavelengths allow for the calculation of vegetation indices, such as Normalized Difference Vegetation Index (NDVI). The vegetation growth and greenness, in this region, grows and evolves uniformly as the growing season progresses. However one of the biggest threats to Midwest vegetation during the time period is thunderstorms that bring large hail and damaging winds. Hail and wind damage to crops can be very expensive to crop growers and, damage can be spread over long swaths associated with the tracks of the damaging storms. Damage to the vegetation can be apparent in remotely sensed imagery and is visible from space after storms slightly damage the crops, allowing for changes to occur slowly over time as the crops wilt or more readily apparent if the storms strip material from the crops or destroy them completely. Previous work on identifying these hail damage swaths used manual interpretation by the way of moderate and higher resolution satellite imagery. With the development of an automated and near-real time hail swath damage identification algorithm, detection can be improved, and more damage indicators be created in a faster and more efficient way. The automated detection of hail damage swaths will examine short-term, large changes in the vegetation by differencing near-real time eight day NDVI composites and comparing them to post storm imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua and Visible Infrared Imaging Radiometer Suite (VIIRS) aboard Suomi NPP. In addition land surface temperatures from these instruments will be examined as for hail damage swath identification. Initial validation of the automated algorithm is based upon Storm Prediction Center storm reports but also the National Severe Storm Laboratory (NSSL) Maximum Estimated Size Hail (MESH) product. Opportunities for future work are also shown, with focus on expansion of this algorithm with pixel-based image classification techniques for tracking surface changes as a result of severe weather.

Bell, Jordan R.↗

NASA NTRS2017

The Radio Frequency Environment at 240-270 MHz with Application to Signal-of-Opportunity Remote Sensing

Low frequency observations are desired for soil moisture and biomass remote sensing. Long wavelengths are needed to penetrate vegetation and Earths land surface. In addition to the technical challenges of developing Earth observing spaceflight instruments operating at low frequencies, the radio frequency spectrum allocated to remote sensing is limited. Signal-of-opportunity remote sensing offers the chance to use existing signals exploiting their allocated spectrum to make Earth science measurements. We have made observations of the radio frequency environment around 240-270 MHz and discuss properties of desired and undesired signals.

Soil Moisture↗

NASA NTRS2015

The Two-Column Aerosol Project: Phase I - Overview and Impact of Elevated Aerosol Layers on Aerosol Optical Depth

The Two-Column Aerosol Project (TCAP), conducted from June 2012 through June 2013, was a unique study designed to provide a comprehensive data set that can be used to investigate a number of important climate science questions, including those related to aerosol mixing state and aerosol radiative forcing. The study was designed to sample the atmosphere be tween and within two atmospheric columns; one fixed near the coast of North America (over Cape Cod, MA) and a second moveable column over the Atlantic Ocean several hundred kilometers from the coast. The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF) was deployed at the base of the Cape Cod column, and the ARM Aerial Facility was utilized for the summer and winter intensive observation periods. One important finding from TCAP is that four of six nearly cloud-free flight days had aerosol layers aloft in both the Cape Cod and maritime columns that were detected using the nadir pointing second-generation NASA high-spectral resolution lidar (HSRL-2).These layer s contributed up to 60 of the total observed aerosol optical depth (AOD). Many of these layers were also intercepted by the aircraft configured for in situ sampling, and the aerosol in the layers was found to have increased amounts of biomass burning material and nitrate compared to aerosol found near the surface. In addition, while there was a great deal of spatial and day-to-day variability in the aerosol chemical composition and optical properties, no systematic differences between the two columns were observed.

aerosols↗

NASA NTRS2018

Impact Study of the Assimilation of Surface Sensitive Microwave Radiances in the GEOS

The aim of this study is to investigate the feasibility of assimilating low frequency microwave observations from different satellite Microwave radiometers such as the Advanced Microwave Sounding Unit-A (AMSU-A). These observations are relevant to the description of air temperature, humidity, and surface parameters such as ocean surface temperature. Their assimilation into Goddard Earth Observing System (GEOS) modeling and assimilation system helps better constrain models in regions where very few observations are assimilated. In recent years, Channels 1â€“4 and 15 have not been assimilated in GEOS because of their large sensitivities to uncertain surface parameters such as emissivity and skin temperature. Here, the impact of using different channels will be discussed. Also we investigate the validity of the emissivity model in these channels over ocean and sea ice.Radiative transfer calculations necessary for the assimilation of satellite radiances are performed using the Community Radiative Transfer Model (CRTM). The CRTM performs forward radiative transfer calculations of brightness temperature from atmospheric profiles (temperature, moisture, and ozone) and surface characteristics. Additionally, the CRTM calculates the Jacobians of brightness temperature with respect to the input . The Jacobians are for the inversion of these radiances within the Gridpoint Statistical Interpolation (GSI) analysis system. Here, For direct assimilation of the radiance observations, the interface between GSI and CRTM, is slightly modified. Finally, we validate the assimilation results, and discuss the impact of each channels in detail.

Ebrahimi, Hamideh↗

NASA NTRS2019

Visualization and Analysis of Solar System Small Bodies with NASA's Solar System Treks Project

In its investigations of Vesta and Ceres, NASA’s Dawn mission has returned spectacular data detailing the surfaces of these two prominent small bodies in our Solar System’s asteroid belt. In order to greatly facilitate dissemination, visualization, and analysis of this data, and public understanding of the mission, the Dawn mission has partnered with NASA’s Solar System Treks Project (SSTP). SSTP has recently released an update to the Vesta Trek online portal (https://trek.nasa.gov/vesta/) and has released a new Ceres Trek portal (https://trek.nasa.gov/ceres/). This presentation will showcase the use of the Ceres Trek and Vesta Trek portals and demonstrate how they can be used to visualize and analyze particularly interesting landforms such as the pitted terrain on Vesta and relic cryovolcanoes on Ceres. We will also demonstrate the new VR capability that has been added to the portals, allowing users to generate their own virtual reality flyovers for any user-defined paths along the bodies’ surfaces. In addition to highlighting the portals for Ceres and Vesta, the presentation will preview additional portals being planned/developed for other small bodies. NASA and JAXA have requested the development of a portal for the asteroid Ryugu to facilitate dissemination, visualization, and analysis of data from Japan’s Hayabusa2 mission, and a portal for Mars’ moon Phobos in support of mission planning for Japan’s MMX mission. We are also planning a portal for the asteroid Bennu with data from the OSIRIS-Rex mission. All of these products are efforts in the NASA Solar System Treks Project (SSTP), available at https://trek.nasa.gov. NASA's Solar System Trek online portals provide web-based suites of interactive data visualization and analysis tools to enable mission planners, planetary scientists, students, and the general public to access mapped data products from past and current missions for a growing number of planetary bodies including the Moon, Mars, Vesta, etc. These portals are being used for site selection and analysis by NASA and a number of its international partners, supporting upcoming missions. In addition to demonstrating the capabilities of selected portals in this presentation, we will solicit input from the community for ideas for future enhancements to the portals.

Day, Brian↗

NASA NTRS2019

Long Duration Venus Probes and Landers

Planetary probes have long been a tool used by scientists to gain early clues on environments and systems of new planetary targets. This not only fueled the scientific process but also helped prepare for future missions, such as landers, and helped ensure their success. Venus, Earth's sister planet, has been the target of more probes and landers than any other body in our solar system except for Earth and yet many fundamental questions are unanswered. Challenge for Venus Surface Science: This lack of knowledge is a result of the challenging Venus environments. Remote sensing of the surface and portions of the atmosphere is difficult at best due to the thick layers of sulfuric acid clouds and the high pressure supercritical CO2 atmosphere below those clouds. This has hampered the ability of orbiting missions to provide us insight into surface features and processes and thus hides potential clues on interior process from our view. Surface probes and landers face an even more daunting challenge, which is the extreme temperature, pressure and unfriendly chemical composition of the near surface atmosphere. Over 10 assets have landed on the surface yet the longest surviving asset Venera-13 lasted only 127 minutes before succumbing to the extreme temperature. While this and other landers provided valuable new data, the short life impacted ability to understand any temporal processes, for example meteorology, seismic active, and therefore very little is known about the interior and surface atmosphere interactions. New Capability Offering Potential Solutions: Re-cent developments by NASA are offering hope of overcoming the technical challenges of surface operations and life with the use of high temperature electronics and systems. Wide band gap, SiC based electronics have been demonstrated to function successfully for extended periods of time both at 500C, Venus surface temperatures as well as when temperature is combined with the reactive chemistry of the surface atmosphere and the high pressures (over 90 bar pressure at the surface). In addition to electronics a number of other subsystems are in development including power in the form of high temperature batteries and power management devices, communications including antennas, transmitters and other components, materials, and structures and mechanisms. These are all activities under NASA's Long Lived In situ Solar System Exploration (LLISSE) project. Other activities are also funded under NASA's HOTTech program.

Kremic, T.↗

NASA NTRS2019

High-Resolution Potassium Observations of the Lunar Exosphere

We observed lunar exospheric potassium D1 (7,698.9646 Å) emissions using a high-spectral resolution Fabry-Perot spectrometer in 2014. We present the first potassium line profile measurements, which are representative of the potassium velocity distribution. Inferred temperatures are greater during the waxing gibbous phase, 1920 ± 630 K and lower at waning gibbous phase, 980 ± 200 K. Exosphere models suggest that the measured line widths are a combination of photon-stimulated desorption and impact vaporization sources. The relative potassium emission intensity decreases by ∼2.5 between lunar phases 80◦ and 30◦ and is brightest off the northwest limb near the Aristarchus crater, which is a potassium-rich surface region. Additionally, the emissions off the northern limb are brighter than the southern limb. The intensity decrease and the greater line width during the waxing gibbous versus the waning gibbous phase suggests a dawn-dusk asymmetry.

Rosborough, S. A.↗

NASA NTRSDate not supplied

The Behavior of High-Velocity Dust Generated by Lander Plumes in the Lunar Environment

Lunar lander plumes have been determined to generate fine ejecta at speeds exceeding 2 km/s [1], and recent work [2] has shown that Escape Velocity Domain (EVD) ejecta may remain in orbit for extended periods of time. By confining this study to expected near-term lunar activity and the known cone of dust generated by lunar landings, the behavior of high-velocity dust is characterized in an effort to understand its impact on orbiting lunar infrastructure such as the Gateway as well as the footprint of reimpacting dust on the lunar surface. In addition to the regular 3-body gravitation effects, the effects of Solar Radiation Pressure and charge are both quantified and modeled.

Lunar↗

NASA NTRS2020

Effects of electromagnetic wave interference on observations of the Earth radiation budget

This paper investigates conditions necessary to match the irradiance derived by integrating radiances measured by a narrow field of view scanning radiometer with the irradiance measured by a hemispherical radiometer, both placed at a satellite altitude for Earth radiation budget estimates. When all sources are similar and they are spatially distributed randomly, then integrating radiance for the irradiance does not introduce a bias. Although the exact magnitude of the bias in other conditions is unknown, a finite area of the aperture that is much larger than the coherence area of radiation contributing to the Earth radiation budget, and a finite time to take a single measurement that is longer than the coherence time are likely to make the difference of the irradiance integrated from radiances and the irradiance measured by a hemispherical instrument insignificant. This conclusion does not contradict the existence of spatial coherence of light from incoherent sources. Therefore, electromagnetic energy absorbed by Earth is derivable from radiances measured by a scanning radiometer integrated over the Earth-viewing hemisphere and then averaging across all locations on the satellite orbital sphere when combined with solar irradiance measurements. Comparisons made in earlier studies show that the difference is less than 1%. In addition, when surface irradiances computed by a radiative transfer model constrained by top-of-atmosphere irradiances derived from radiance measurements are compared with downward shortwave irradiances taken by combinations of a pyreheliometer and a shaded pyranometer, or pyranometers, and with longwave ir- radiances taken by pyrgeometers, the biases in monthly mean irradiances are less than the uncertainties in the surface observations.

Seiji Kato↗

NASA NTRSDate not supplied

Mechanical Erosion Modeling of TPS Materials

This work describes the development of a model that accounts for the additional total surface recession in Thermal Protection Systems materials as a result of mechanical erosion due to high shear conditions during atmospheric entry. A computational solid mechanics capability module was integrated within the Porous material Analysis Toolbox based on OpenFOAM, PATO. The mechanical erosion was modeled in three steps: first, the implemented stress analysis solver module computes the stress and the displacement fields for orthotropic materials using the wall shear stress tensor as a boundary condition; then, regions on the surface where the stress meets the failure criteria are identified; and last, the mesh is moved accordingly to remove the failed material. The outcome is a model of the total recession of the material due to surface chemistry and mechanical erosion. Results will be included in the final paper after verifying and completing the study.

Stress Analysis↗

NASA NTRSDate not supplied

Updates on the Predictive Materials Modeling Software Tools

Updates on NASA‘s efforts to build a Predictive Material Modeling (PMM) framework from the micro-scale to the macro-scale are presented in this abstract. The PMM effort is part of the Entry Systems Modeling (ESM) project under NASA’s Game Changing Development (GCD) program. To reduce the need for extensive testing and accelerate the design cycle process, ESM is developing simulation and modeling tools that enable the characterization of the properties of thermal protection materials and their response to extremely hot plasma. The Porous Microstructure Analysis (PuMA) software has been developed to compute effective material properties and perform material response simulations on digitized microstructures of porous media. PuMA is able to import three-dimensional digital images obtained from X-ray microtomography or to generate artificial microstructures that mimic real materials. PuMA also provides a module for interactive 3D visualizations. Version 3, which was recently released as open-source, includes modules to compute simple morphological properties such as porosity, volume fractions, pore diameter, and specific surface area. Additional capabilities include the determination of effective thermal and electrical conductivity (both radiative and solid conduction - including the ability to simulate local anisotropy for the latter); effective diffusivity and tortuosity from the continuum to the rarefied regime; techniques to determine the local material orientation, as well as mechanical properties (elasticity coefficients), and permeability. Computed properties are then used to inform a macro-scale material response model, such as those implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software developed within ESM. The computational model in PATO is a generic heat and mass transfer model for porous reactive materials containing several solid phases and a single gas phase. The detailed chemical interactions occurring between the solid phases and the gas phase are modeled at the pore scale, assuming Local Thermal Equilibrium. Recent efforts include the development of a mechanical erosion model as well as a unified model allowing an intrinsic coupling between fluid and material. Comparison to flight data (Mars Science Laboratory [MSL] Entry Descent and Landing Instrument [MEDLI] and Mars 2020 MEDLI2) is critical in order to validate these computational tools. Examples of ablative material response using the code will be presented, including 3D simulations of the full-scale heatshield of the MSL capsule. The simulations demonstrated the ability of the modern material response code, PATO, to handle the material response of geometrically complex and large domains through the use of massively parallel computations.

material modeling↗

NASA NTRSDate not supplied

Analysis of the Pioneer Venus Large Probe Neutral Mass Spectrometer Data Yields New Insights into the Composition of Venus’ Atmosphere

We present a new analysis of mass spectral data obtained by the Pioneer Venus (PV) Large Probe Neutral Mass Spectrometer (LNMS). To analyze the LNMS data, we constructed an analytical model that accounts for spectrometer performance at each altitude, provides CO2 abundances in units of density (kg/m3), and retains the resolving power of the LNMS through use of a targeted data-fitting routine. Our results provide new insights into the composition of Venus’ atmosphere and show that densities for CO2 increase towards the surface, which is suggestive of surface outgassing. Additionally, the data reveal partial obstructions of the LNMS inlet at <17 km, which is an likely important consideration for future missions. Re-analysis of the LNMS data may assist in revealing the past, present and/or future habitability of Venus’ clouds.

mass spectral data↗

NASA NTRSDate not supplied

Single-Component Average Velocity Profiles in the Wake of the Orion Crew Capsule at the National Transonic Facility

A minimally intrusive molecular tagging instrument measured single-component average velocity profiles in two planes in the wake of the Orion capsule with different heat shield configurations in the National Transonic Facility at the NASA Langley Research Center. Reynolds number effects at subsonic conditions have proven difficult to predict due to the largely separated wake flow. Therefore two measurement planes in the wake of the model were probed to measure the wake profile for different heat shield configurations and act as a validation reference for computational tools. Air testing included Mach numbers of 0.3, 0.5, and 0.7 at Reynolds numbers of 5.3 and 7.5 million. In cryogenic nitrogen, the instrument was employed under transient conditions during the facility warm up at M = 0.3 with decreasing Reynolds numbers from 16 million. An exhaustive list of the results is shown and discussed here. For free transition heat shield configurations, the size of the wake was found to increase with Mach number, yet remain constant with Reynolds number for low (M = 0.3) and high (M = 0.7) subsonic Mach numbers. However, intermediate Mach numbers (M = 0.5) showed that the wake was smaller at higher Reynolds numbers for the IDAT heat shield. The addition of surface roughness in the form of grit, known as the fixed transition cases, negated any Mach number dependence to the wake profile and increased the size of the wake for all cases.

Velocimetry↗

NASA NTRSDate not supplied

Single-Component Average Velocity Profiles in the Wake of the Orion Crew Capsule at the National Transonic Facility

Velocimetry↗

NASA NTRS2022

Ice Sheet Melt Water Profile Mapping Using Multi-frequency Microwave Radiometry

For understanding englacial hydrology and its impact on ice sheet mass balance, observations of the liquid water content (LWC) within the ice sheets are needed. Earlier studies have shown the complementary nature of multi-frequency microwave radiometer measurements to detect subsurface LWC distribution in addition to surface LWC, which is critical for understanding the seasonal melt dynamics of ice sheets. In this study, we used 1.4 GHz brightness temperature (TB) measurements from the NASA Soil Moisture Active Passive (SMAP) satellite, and 6.9, 10.7, 18.9, and 36.5 GHz TB measurements from the JAXA Global Change Observation Mission-Water Shizuku (GCOM-W) satellite to investigate the multi-frequency response at pan-Greenland scale. The melt indications derived at different frequencies show trends consistent with persistent seasonal subsurface melt water and delayed subsurface refreezing of the seasonal melt water. The result suggests that the seasonal subsurface persistent melt water occurrences that are not captured by the high-frequency retrievals are both temporally and spatially very significant.

Burgin, Mariko↗

NASA NTRS2022

Nickel Accounting for the Psyche Spacecraft

(16) Psyche is a metallic asteroid located in the asteroid belt between Mars and Jupiter. The composition of Psyche is unknown, but the scientific community believes it is composed primarily of iron, nickel, and silicates. The Psyche mission will be the first space mission to study this asteroid in close proximity, and as such, determining the elemental composition of the asteroid is one of the primary objectives of this mission. The spacecraft measures this elemental composition using the Gamma Ray Spectrometer (GRS), which detects cosmic-ray induced gamma rays from Psyche’s surface. In addition to gamma rays from Psyche, the GRS will also detect background gamma rays from spacecraft material nearby the GRS. Because Ni is such a key element for achieving the mission science objectives, a special effort has been made to minimize background gamma rays from Ni, thus maximizing sensitivity to the Ni gamma rays from Psyche. The Psyche mission approached this potential Ni background issue with two methods, locating the GRS away from the spacecraft/source of Ni and setting a threshold requirement against the total Ni mass of the spacecraft. Verifying that the total amount of Ni on the spacecraft is within this threshold is thus a key part of ensuring the GRS can meet its science objectives. Ni alloys are commonly used on spacecraft, but the mass and location of elemental Ni is not typically accounted for. Ni can be found in many materials all over the spacecraft – in fasteners, optical assemblies, magnetic shields, electromagnetic interference (EMI) tape, under gold plating, in connectors, and so on. The task proved further challenging because of the distributed nature of the build of this spacecraft and the use of vendors external to JPL. While the analysis was atypical and source information difficult to cull, the approach described in this paper used tools and data available to the project in some form to achieve this goal. For Psyche, current analysis shows there is margin in meeting the Ni mass requirement. This paper explains the systematic approach used to accurately and precisely record Ni content on the Psyche spacecraft. While this approach was defined for Ni on the Psyche mission, it can be used for any future project with the need to accurately estimate the total mass of a single element or material on a spacecraft.

Cullinan, Joe↗