Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Mars Entry Atmospheric Data System Modeling, Calibration, and Error Analysis

The Mars Science Laboratory (MSL) Entry, Descent, and Landing Instrumentation (MEDLI)/Mars Entry Atmospheric Data System (MEADS) project installed seven pressure ports through the MSL Phenolic Impregnated Carbon Ablator (PICA) heatshield to measure heatshield surface pressures during entry. These measured surface pressures are used to generate estimates of atmospheric quantities based on modeled surface pressure distributions. In particular, the quantities to be estimated from the MEADS pressure measurements include the dynamic pressure, angle of attack, and angle of sideslip. This report describes the calibration of the pressure transducers utilized to reconstruct the atmospheric data and associated uncertainty models, pressure modeling and uncertainty analysis, and system performance results. The results indicate that the MEADS pressure measurement system hardware meets the project requirements.

Karlgaard, Christopher D.↗
NASA NTRS2013

Testing of the Trim Tab Parametric Model in NASA Langley's Unitary Plan Wind Tunnel

In support of NASA's Entry, Descent, and Landing technology development efforts, testing of Langley's Trim Tab Parametric Models was conducted in Test Section 2 of NASA Langley's Unitary Plan Wind Tunnel. The objectives of these tests were to generate quantitative aerodynamic data and qualitative surface pressure data for experimental and computational validation and aerodynamic database development. Six component force-and-moment data were measured on 38 unique, blunt body trim tab configurations at Mach numbers of 2.5, 3.5, and 4.5, angles of attack from -4deg to +20deg, and angles of sideslip from 0deg to +8deg. Configuration parameters investigated in this study were forebody shape, tab area, tab cant angle, and tab aspect ratio. Pressure Sensitive Paint was used to provide qualitative surface pressure mapping for a subset of these flow and configuration variables. Over the range of parameters tested, the effects of varying tab area and tab cant angle were found to be much more significant than varying tab aspect ratio relative to key aerodynamic performance requirements. Qualitative surface pressure data supported the integrated aerodynamic data and provided information to aid in future analyses of localized phenomena for trim tab configurations.

Murphy, Kelly J.↗
NASA NTRS2009

Mars Entry Atmospheric Data System Modelling and Algorithm Development

The Mars Entry Atmospheric Data System (MEADS) is being developed as part of the Mars Science Laboratory (MSL), Entry, Descent, and Landing Instrumentation (MEDLI) project. The MEADS project involves installing an array of seven pressure transducers linked to ports on the MSL forebody to record the surface pressure distribution during atmospheric entry. These measured surface pressures are used to generate estimates of atmospheric quantities based on modeled surface pressure distributions. In particular, the quantities to be estimated from the MEADS pressure measurements include the total pressure, dynamic pressure, Mach number, angle of attack, and angle of sideslip. Secondary objectives are to estimate atmospheric winds by coupling the pressure measurements with the on-board Inertial Measurement Unit (IMU) data. This paper provides details of the algorithm development, MEADS system performance based on calibration, and uncertainty analysis for the aerodynamic and atmospheric quantities of interest. The work presented here is part of the MEDLI performance pre-flight validation and will culminate with processing flight data after Mars entry in 2012.

Karlgaard, Christopher D.↗
NASA NTRS2000

Temperature Correction of Pressure-Sensitive Paints Simplified

Pressure-sensitive paint (PSP) has become a useful tool to augment conventional pressure taps in measuring the surface pressure distribution of aerodynamic components in wind tunnel testing. Although PSP offers the advantage of nonintrusive global mapping of the surface pressure, one prominent drawback to the accuracy of this technique is the inherent temperature sensitivity of PSP's luminescent intensity. Typical aerodynamic surface PSP tests rely on the coated surface to be both spatially and temporally isothermal, along with conventional instrumentation, to yield the highest accuracy pressure mappings. In some tests, however, spatial and temporal thermal gradients are generated by the nature of the test, as in a blowing jet impinging on a surface. In these cases, high accuracy and reliable data cannot be obtained unless the temperature variations on the painted surface are accounted for. A new temperature-correction technique was developed at the NASA Glenn Research Center at Lewis Field to collapse a "family" of PSP calibration curves to a single curve of intensity ratio versus pressure. This correction allows a streamlined procedure to be followed whether or not temperature information is used in the data reduction of the PSP.

Bencic, Timothy J.↗
NASA NTRS2021

Modeling Laminar-to-Turbulent Transition in the Panel Test Facility Arcjet

A computational fluid dynamics (CFD) laminar-to-turbulence transition model was developed for the NASA Ames Research Center’s 20 MW Panel Test Facility (PTF). Surface pressure, heat flux to a water-cooled plate, and surface temperature on a tile plate coated with reaction-cured glass were measured across several conditions in the facility and compared with laminar and fully-turbulent CFD simulations. The potential for bypass transition in the PTF nozzle was assessed via application of the Langtry-Menter four-equation transitional shear-stress transport (SST) model. Results from the transition model were inconsistent with measurements. Flow interaction with a boundary conditioning plate feature inside the nozzle was also investigated as a potential source of laminar-to-turbulent transition using two turbulence models with specified transition locations. The Baldwin-Lomax turbulence model was configured to simulate a transition at the upstream edge of the boundary conditioning plate and produced results consistent with the surface pressure measurements but not the cold-wall heat flux. Finally, the SST turbulence model was calibrated to transition at the upstream edge of the boundary conditioning plate and produced results consistent with both the surface pressure and cold-wall heat flux measurements. The SST-based model demonstrated reasonable agreement with surface temperature measurements on the reaction-cured glass tile, albeit with some discrepancies.

Computational Fluid Dynamics↗
NASA NTRS1991

On the scale of surface features in hypersonic swept shock boundary-layer interactions

A parametric study of a Mach 8 fin-induced shock interaction with a turbulent boundary layer was performed in a shock tunnel using surface oil-dot visualization and surface pressure measurements. The study showed that the interaction was separated and secondary separation was detected for the strongest cases studied. Although the inviscid shock wave was close to the fin, the interaction was spread over large angular extents. The interaction showed inception to conical symmetry at the highest shock strengths. Additionally, the surface pressure distribution showed an extensive plateau region, with no distinct dip associated with strongly separated interactions. Between the fin and the inviscid shock, the surface pressure rose rapidly but did not approach the downstream inviscid shock, the surface pressure rose rapidly but did not approach the downstream inviscid value.

Pace, E. G.↗
NASA NTRS1999

Coupling of Low Speed Fan Stator Vane Unsteady Pressures to Duct Modes: Measured versus Predicted

Uniform-flow annular-duct Green's functions are the essential elements of the classical acoustic analogy approach to the problem of computing the noise generated by rotor-stator interaction inside the fan duct. This paper investigates the accuracy of this class of Green's functions for predicting the duct noise levels when measured stator vane unsteady surface pressures are used as input to the theoretical formulation. The accuracy of the method is evaluated by comparing the predicted and measured acoustic power levels for the NASA 48 inch low speed Active Noise Control Fan. The unsteady surface pressures are measured,by an array of microphones imbedded in the suction and pressure sides of a single vane, while the duct mode levels are measured using a rotating rake system installed in the inlet and exhaust sections of the fan duct. The predicted levels are computed using properly weighted integrals of measured surface pressure distribution. The data-theory comparisons are generally quite good particularly when the mode cut-off criterion is carefully interpreted. This suggests that, at least for low speed fans, the uniform-flow annular-duct Green's function theory can be reliably used for prediction of duct mode levels if the cascade surface pressure distribution is accurately known.

Sutliff, Daniel L.↗
DOE OSTI2022

Instrumentation development and testing of a wind turbine blade for sub-scale wake studies

Wind turbine blade aerodynamics and the resulting wake flow are complex, and wind tunnel testing of these flows can provide critical insight. The data from such tests are also valuable for validation of numerical models. For experiments using sub-scale turbines to be useful, the blade aerodynamics and wakes must exhibit the important features observed in utility-scale turbine flows. In this work, ~1 m blades designed to produce physics relevant to larger scale turbines were manufactured and affixed to an existing turbine. One of the blades was instrumented for blade surface pressure measurements. Time-dependent surface pressure measurements coupled with instantaneous measurements of the inflow with Cobra probes and the wake with particle image velocimetry allowed for characterization of the inflow, blade flow, and near wake. The results demonstrate that the instrumentation was effective in characterizing the blade loading and the flow field. For the one test case discussed in this paper, the measurements of inflow, blade loading, and wake properties facilitate understanding of the wake's behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1982

An experimental investigation of flow surrounding an airfoil with a jet exhausting from the lower surface

The aerodynamics of an airfoil with a rectangular jet issuing from the lower surface at seventy percent of the chord, with and without a ground plane was studied. Measurements include surface pressure on the airfoil and the total pressure profiles in the near wake. These measurements were made at jet to free stream velocity ratios ranging from 0.5 to 5.0. The measurements indicated a significant positive and negative pressure regions on the lower surface of the airfoil ahead and after the nozzle exit respectively. The extent and intensity of these regions increase with increase in velocity ratio for the range covered here. The upper surface pressure distribution with velocity ratio show no significant variation. The presence of the ground plane, for height h, greater than one chord seem to have little influence on the overall pressure distribution of the airfoil. The airfoil wake centerline moves up with velocity ratio as compared to that of the free airfoil (without the jet).

Krothapalli, A.↗
DOE OSTI2020

Optical Transmission Spectroscopy of the Terrestrial Exoplanet LHS 3844b from 13 Ground-based Transit Observations

Atmospheric studies of spectroscopically accessible terrestrial exoplanets lay the groundwork for comparative planetology between these worlds and the solar system terrestrial planets. LHS 3844b is a highly irradiated terrestrial exoplanet (R = 1.303 ± 0.022R {sub ⊕}) orbiting a mid-M dwarf 15 parsecs away. Work based on near-infrared Spitzer phase curves ruled out atmospheres with surface pressures ≥10 bars on this planet. We present 13 transit observations of LHS 3844b taken with the Magellan Clay telescope and the LDSS3C multi-object spectrograph covering 620–1020 nm. We analyze each of the 13 data sets individually using a Gaussian process regression, and present both white and spectroscopic light curves. In the combined white light curve we achieve an rms precision of 65 ppm when binning to 10 minutes. The mean white light-curve value of (R {sub p}/R {sub s}){sup 2} is 0.4170 ± 0.0046%. To construct the transmission spectrum, we split the white light curves into 20 spectrophotometric bands, each spanning 20 nm, and compute the mean values of (R {sub p}/R {sub s}){sup 2} in each band. We compare the transmission spectrum to two sets of atmospheric models. We disfavor a clear, solar composition atmosphere (μ = 2.34) with surface pressures ≥0.1 bar to 5.2σ confidence. We disfavor a clear, H{sub 2}O steam atmosphere (μ = 18) with surface pressures ≥0.1 bar to low confidence (2.9σ). Our observed transmission spectrum favors a flat line. For solar composition atmospheres with surface pressures ≥1 bar we rule out clouds with cloud-top pressures of 0.1 bar (5.3σ), but we cannot address high-altitude clouds at lower pressures. Our results add further evidence that LHS 3844b is devoid of an atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1994

Experimental Study of Vane Heat Transfer and Aerodynamics at Elevated Levels of Turbulence

A four vane subsonic cascade was used to investigate how free stream turbulence influences pressure surface heat transfer. A simulated combustor turbulence generator was built to generate high level (13 percent) large scale (Lu approximately 44 percent inlet span) turbulence. The mock combustor was also moved upstream to generate a moderate level (8.3 percent) of turbulence for comparison to smaller scale grid generated turbulence (7.8 percent). The high level combustor turbulence caused an average pressure surface heat transfer augmentation of 56 percent above the low turbulence baseline. The smaller scale grid turbulence produced the next greatest effect on heat transfer and demonstrated the importance of scale on heat transfer augmentation. In general, the heat transfer scaling parameter U(sub infinity) TU(sub infinity) LU(sub infinity)(exp -1/3) was found to hold for the turbulence. Heat transfer augmentation was also found to scale approximately on Re(sub ex)(exp 1/3) at constant turbulence conditions. Some evidence of turbulence intensification in terms of elevated dissipation rates was found along the pressure surface outside the boundary layer. However, based on the level of dissipation and the resulting heat transfer augmentation, the amplification of turbulence has only a moderate effect on pressure surface heat transfer. The flow field turbulence does drive turbulent production within the boundary layer which in turn causes the high levels of heat transfer augmentation. Unlike heat transfer, the flow field straining was found to have a significant effect on turbulence isotropy. On examination of the one dimensional spectra for u' and v', the effect to isotropy was largely limited to lower wavenumber spectra. The higher wavenumber spectra showed little or no change. The high level large scale turbulence was found to have a strong influence on wake development. The free stream turbulence significantly enhanced mixing resulting in broader and shallower wakes than the baseline case. High levels of flow field turbulence were found to correlate with a significant increase in total pressure loss in the core of the flow. Documenting the wake growth and characteristics provides boundary conditions for the downstream rotor.

Ames, Forrest E.↗
NASA NTRSDate not supplied

Sea Surface Air Pressure Retrieval with MBARS

Global meteorological observations are essential in initialization and assimilation of numerical weather prediction (NWP) models. Many key weather variables such as temperature, humidity, and wind can be relatively well observed by in-situ and remote techniques from surface, suborbital and orbital platforms. However, sea surface air pressure cannot be well-sampled. Over open oceans, the pressure can only be observed by very limited buoys, ships, and oceanic platforms. There is no operational remote sensing method available for the crucial dynamic variable of the Earth’s climate and weather systems. Advanced techniques for global sea level pressure (SLP) observations are urgently needed for improving NWP models, particularly for improvement of severe weather forecasts. Recent studies on the space and airborne Microwave BArometric Radar and Sounder (MBARS) systems provide a great potential to fill the SLP observational gap. The systems studied have three channels with center frequencies at 65.5, 67.76 and 70 GHz. These channels are designed to operate at atmospheric oxygen (O2) absorption bands for column O2 mass measurements. When sea surface returns of spectrally closely-spaced paired channels are measured, surface reflection and atmospheric attenuation other than O2 are very similar, but the difference in O2 absorption is substantial. Thus, the differential absorption loss of this frequency pair leads to measures of atmospheric O2 amount. For the residual absorption loss caused by other agents, a third frequency having the same spectral space to the weak absorption frequency of the first pair can be used, which forms the second pair and produces the same residual as the first pair. Removal of the residual of this second pair from the first pair can further mitigate environmental impacts. Thus, this 3-channel approach will provide precise O2 amount retrievals. Since oxygen is well mixed in the atmosphere, the column air mass or SLP can be obtained. Currently, MBARS is rapidly maturing its advanced technology. An upcoming airborne field flight campaign is planned in late 2024. The 3-channel approach will be use in SLP retrievals. This MBARS team will discuss the physics-based SLP retrieval technique and report latest progresses in this upcoming AGU annual meeting.

O2 differential absorption↗
DOE OSTI2024

An integrated approach to derive relative permeability from capillary pressure

Surface tension affects all aspects of fluid flow in porous media. Through measurements of surface tension interaction under multiphase conditions, a relative permeability curve can be determined. Relative permeability is a numerical description of the interaction between two or more fluids and the porous media. It is a critical parameter for various tools that characterize subsurface multiphase flow systems, such as numerical simulation for carbon sequestration, oil and gas development, and groundwater contamination remediation. Therefore, it is critical to get a good statistical distribution of relative permeability in the porous media under study. Empirical formula for determining relative permeability from capillary pressure are already well established but do not provide the needed flexibility that is required to match laboratory-derived relative permeability curves. By expanding the existing methods for calculating relative permeability from capillary pressure data, it is possible to create both two and three-phase relative permeability curves. Mercury intrusion capillary pressure (MICP) data from the Morrow 'B' Sandstone coupled with interfacial tension and contact angle measurements were used to create a suite of relative permeability curves. Furthermore, these curves were then calibrated to a small sample of existing laboratory curves to elucidate common fitting parameters for the formation that were then used to create relative permeability curves from MICP data that does not have an associated laboratory-measured relative permeability curve.

58 GEOSCIENCES↗
NASA NTRS1972

Surface-flow, pressure, and heat-transfer studies on two conical delta wings at a Mach number of 6

An experimental investigation of the surface flow, pressures, and heat transfer on two conical delta wings having attached leading-edge shocks has been conducted at a Mach number of 6. The angle of attack was varied between 0 deg and 12 deg. The pressure data were compared with predictions obtained by the method-of-lines technique, and the heating data were compared with the heating levels predicted by the Spalding-Chi method.

Hefner, J. N.↗
NASA NTRS2005

Active control of Boundary Layer Separation & Flow Distortion in Adverse Pressure Gradient Flows via Supersonic Microjets

Inlets to aircraft propulsion systems must supply flow to the compressor with minimal pressure loss, flow distortion or unsteadiness. Flow separation in internal flows such as inlets and ducts in aircraft propulsion systems and external flows such as over aircraft wings, is undesirable as it reduces the overall system performance. The aim of this research has been to understand the nature of separation and more importantly, to explore techniques to actively control this flow separation. In particular, the use of supersonic microjets as a means of controlling boundary layer separation was explored. The geometry used for the early part of this study was a simple diverging Stratford ramp, equipped with arrays of supersonic microjets. Initial results, based on the mean surface pressure distribution, surface flow visualization and Planar Laser Scattering (PLS) indicated a reverse flow region. We implemented supersonic microjets to control this separation and flow visualization results appeared to suggest that microjets have a favorable effect, at least to a certain extent. However, the details of the separated flow field were difficult to determine based on surface pressure distribution, surface flow patterns and PLS alone. It was also difficult to clearly determine the exact influence of the supersonic microjets on this flow. In the latter part of this study, the properties of this flow-field and the effect of supersonic microjets on its behavior were investigated in further detail using 2-component (planar) Particle Image Velocimetry (PIV). The results clearly show that the activation of microjets eliminated flow separation and resulted in a significant increase in the momentum of the fluid near the ramp surface. Also notable is the fact that the gain in momentum due to the elimination of flow separation is at least an order of magnitude larger (two orders of magnitude larger in most cases) than the momentum injected by the microjets and is accomplished with very little mass flow through the microjets.

Alvi, Farrukh S.↗
NASA NTRS1984

Flow-field measurements on an airfoil with an oscillating trailing-edge using holographic interferometry

Holographic interferometry data were acquired on an NACA 64A010 airfoil with an oscillating flap. The airfoil was installed in the Ames 11-Foot Transonic Wind Tunnel between splitter plates. Recordings were made at discrete phase angles of the oscillation. The interferometry results provided detailed flow visualization of the shock boundary-layer interaction and the separated flow. Quantitative results were extracted from the interferograms to produce pressure data. These results were compared to the surface pressures obtained with the surface pressure taps. Excellent agreement was found for low angles of incidence. At larger angles of incidence, the flow had greater three-dimensionality, and the results were not in good agreement in some regions of the flow field. Mach contours were traced for representative flow conditions. Wake profiles were also obtained using the assumption of constant pressure across the wake and the Crocco relationship.

Bachalo, W. D.↗