Search NASA⌕ Search

SEARCH · Search NASA

Results for “technoeconomics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Resource Recovery and Environmental Protection in Wyoming’s Greater Green River Basin Using Selective Nanostructured Membranes (Final Report)

Produced water (PW) represents a sizable waste stream that is co-generated with oil and natural gas production. In 2021 Wyoming ranked 8th and 9th, respectively in domestic oil and natural gas production. In 2017 Wyoming ranked as the 4th highest generator of PW in the U.S, accounting for 7% of the total volume generated. In the context of being the 3rd most arid state in the U.S., the value of water reuse becomes obvious. PW reuse, and resource recovery, in any form requires some level of treatment to remove particulates, residual (free, dispersed) hydrocarbons, organics, and salts. The level of treatment depends on the requirements of the reuse, or resource recovery, application. PW management systems in Wyoming employ in order of volume of PW managed the following management strategies: reinjection for enhanced oil recovery, surface discharge, deep well injection, evaporation ponds (impoundments), and commercial management/treatment. Complicating treatment efforts are the relatively high concentrations of organics (natural and synthetic), dispersed/free hydrocarbons, benzene-toluene-ethylbenzene, and xylenes (BTEX) compounds, biologicals, salts, and minerals. Hydrocarbons (dispersed/dissolved crude oils) and BTEX compounds, as well as synthetic organics, present economic and environmental concerns. The former represents lost revenue, while the latter results in negative environmental impacts like emissions from surface impoundments. The overall objective of this proposal was to synthesize superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes for selectively concentrating and then separating BTEX compounds and oil and grease (O&G) from PW originating from the Greater Green River Basin (GGRB) in Wyoming. Three specific research aims were pursued to accomplish this overall objective. This final report details the development of the superhydrophobic and superhydrophilic membranes, as well as the design of the membrane module prototypes specifically. The technoeconomic assessment is separately reported in another document. 1. Aim #1 – Material optimization and performance evaluation of superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes made by electrospinning/spraying. 2. Aim #2 – Design and construction of cross-flow membrane modules for selectively concentrating and then separating BTEX/oil from GGRB produced water. 3. Aim #3 – Techno-economic assessment of BTEX/oil recovery, and clean water production, using superhydrophilic/oleophobic and superhydrophobic/oleophilic membrane separation for GGRB PW. Superhydrophobic membranes were synthesized by electrospinning poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers onto polyester (PET) substrates and electrospraying nano-carbon black/PVDF-HFP onto the nanofibrous layer. These membranes were characterized by high (>8000 liters per square meter per hour per bar (LMH/bar)) permeance values for pure hydrocarbon phases and a high hydrocarbon selectivity (>96%) when treating GGRB PW. All results were obtained when operating the membrane in a crossflow configuration representative of actual field operating conditions. Solvent/oil properties, specifically viscosity and total surface energy/tension, affected permeance across the membrane, which resulted in light mineral oil (394 LMH/bar) and o-xylene (1834 LMH/bar) being characterized by lower permeance values in the pure phase tests. Mixed phase fluxes between 40 to 80 LMH were obtained for the PW when operating the membrane at a feed pressure of 0.3 bar. Flux decreased as the mixed phase concentration in the feed decreased pointing to the importance of maximizing the collision efficiency between the emulsion and the membrane surface and maximizing the emulsion concentration in the feed and the turbulence within the feed channel. These tests demonstrated that the superhydrophobic membranes developed here are a viable hydrocarbon recovery method for GGRB PWs and should be pursued for testing in pilot-scale trials. Superhydrophilic membranes were successfully synthesized via electrospinning/spraying using polyacrylonitrile (PAN) nanofibers as a base nanofibrous matrix. Integration of polyaniline (PANI) into the nanofibrous matrix produced a superior membrane, for water filtration applications, relative to PAN alone and reduced graphene oxide (RGO) when integrated into the nanofibrous matrix. This conclusion was based on the PANI-PAN resistance to flux loss (fouling) when treating model solvent/oil solutions representative of GGRB PWs and field collected PW from the GGRB. The synthesized PAN membranes outperformed a commercially available PAN membrane designed for oil/water separation. This finding indicates that the surface chemical and physical characteristics of the electrospun membranes presents improved properties for filtration of challenging waters like GGRB PWs. The electrospun membranes therefore show promise overall as a substitute for conventionally polymerized membranes in PW treatment applications. The PANI-PAN membrane specifically presents superior performance characteristics for concentration O&G prior to treatment by the hydrocarbon recovery membrane and producing high-quality filtrate for reuse and/or additional treatment (desalination).

02 PETROLEUM↗
DOE OSTI2022

Emissions mitigation technology for advanced water-lean solvent-based CO 2 capture processes

This technical final report submitted to DOE/NETL presents all the research activities performed during the entirety of DE-FE0031660 project-Emissions Mitigation Technology for Advanced Water-Lean Solvent-Based CO 2 Capture Processes which spans from October 2018 through March 2022. RTI International has been conducting studies from fundamental and operational aspects to reduce the overall amine emissions from the advanced Water-Lean Solvent (WLS) systems, specifically RTI’s Non-Aqueous Solvent (NAS). This technical final report will highlight the key findings from project which align closely to the project objectives which are: Identify the contribution of vapor loss, entrainment, and aerosols to the overall emissions of water-lean systems; Determine the significance of CO 2 capture system operating parameters to the amine emissions; Develop an emissions model based on critical operating parameters; Evaluate the effectiveness of emissions mitigation devices to reduce the amine emissions to <1 ppm under flue coal-fired flue gas; and, Determine the contribution of the ECTs to the overall CO 2 capture cost. The following are the key findings based on numerous tests using both lab-scale setups and parametric testing performed at RTI’s Bench-scale Gas Absorption System (BsGAS). During the BP1, the aerosol generation system and monitoring equipment were installed at BsGAS to produce and determine the aerosol characteristics during the NAS CO 2 capture process. The aerosol produced by this setup produced aerosols with the peak diameter and concentration of 50 micron and 1.2E10 7 cm -3 , respectively. These particle sizes and concentrations are matched to those observed in the actual coal-fired power plant flue gases and expected to be found at the absorber inlet of the CO 2 capture system. Over 1,300 hours of parametric testing have been conducted to evaluate the impact of the aerosols and operating conditions during the CO 2 capture with NAS on the overall amine emissions in the treated flue gas. At the worse condition tested, the presence of the aerosols in the flue gas could increase the overall emissions by 10X compared to the baseline emissions from NAS’s vapor pressure. CO 2 capture rate was found to be a main factor impacting the overall emissions as well as aerosol size and concentrations in the absorber off-gas. The higher CO 2 capture rate, the higher amine emissions in the treated gas. The temperature difference between the temperature bulge seen in the absorber and the water wash temperature also impacts the particle growth where the larger the temperature difference, the more amine emissions from aerosols in the treated gas. The majority of the aerosols did not grow substantially in the system, and the particle concentrations remained nearly constant between the absorber inlet and wash outlet. Only a small portion of the particles were found to grow significantly. The high efficiency demister with mesh size of 5-10 micron can be installed to remove a portion of the aerosols from the gas stream leaving the water wash. Overall, these results from parametric testing have established the emission baseline and validate our assumption on the need of emission control technologies (ECT) in order to minimize the emissions from the baseline NAS CO 2 capture process. Over 2,000 of BsGAS operating hours was used to investigate a handful of process improvements which led to a selection of the vital few changes that effectively control the amine emissions. These process improvements are lime-coated-filters for absorber gas inlet, advanced demister at the top of the absorber, a second water wash with amine recovery unit were designed, installed, and tested at BsGAS at the end of BP1. The result showed that the NAS CO 2 capture process with these additional emission control devices could lower the amine emission in the treated gas to about 1 ppm using a simulated coal-fire flue gas stream. The main contributor in lowering the amine emission came from the second water wash with amine recovery unit where the amine concentration in the scrubbing water was kept below 2 wt% through a continuous amine removal via an adsorbent bed, resulting in a low amine vapor pressure. The adsorbent bed was regenerated via a direct steam regeneration and the recover amine was returned to the absorber to minimize wastewater and makeup amine. A flue gas generation system was designed and installed during the first half of BP2 to support the emission testing using a real coal-derived flue gas. The system is capable of generating both coal- and natural gas- derived flue gases with the composition of the gaseous species highly resemble to that of the power plant flue gases. The particulates detected in the coal-derived flue gas showed the mean diameter of 1 micron. The CO 2 capture operating was then proceed using the real coal-derived flue gas where the amine emission was controlled to be about 0-3 ppm for the total run time of about 200 hours. Similar testing was conducted with natural gas-derived flue gas and the result showed a highly amine emission of 30 ppm under the total run time of 200 hours. The Principal Component Analysis (PCA) and the Partial Least Squares Projection to Latent Structures (PLS) techniques were applied to the parametric testing data to derive a multivariate statistical model. The model was validated and trained with half of the data collected, and the predictive ability of the model was evaluated using the remaining half of the data. The resulting empirical model was capable of predicting the overall emissions from the NAS process without the ECTs with ±15% accuracy (average absolute deviation, AAD) in BP1. As more emission data were obtained under the real coal-flue gas in the BP2, the model incorporated these new set of data to reflect the final process configuration, operating parameters, and amine emission. This results in the updated empirical model predicting the amine emission from the NAS CO 2 capture process with 84% goodness-of-fit (R 2 ), 85% predictability (Q 2 ), and 15% AAD. The study evaluates the use of RTI’s Non-Aqueous Solvent technology for 90% CO 2 capture from a net 650 MWe pulverized coal power plant, downstream of the flue-gas desulfurization unit. The captured CO 2 has a purity of > 95% CO 2 , and is dried, compressed to 15.3 MPa (2,215 psia), ready for sequestration. The analysis uses Case B12B from the DOE Baseline study on Bituminous Coal, Revision 4 where the Cansolv CO 2 capture plant is replaced by the RTI CO 2 Capture plant. The CO 2 capture plant has been sized to capture >90% CO 2 from flue gas derived from a net 650 MWe supercritical pulverized coal power plant. The CO 2 capture plant is equipped with emission control technologies that limits the amine emissions to < 1 ppm. Two different cases were evaluated for the technoeconomic study. The key difference between the two cases is the regenerator pressure. In Case 1, the regenerator operates at 0.195 MPa (28.3 psia), whereas in Case 2, the regenerator pressure is 0.44 MPa (64 psia) thus removing the need for the first stage of compression of the eight-stage compression train. Results from the TEA are compared against the DOE reference cases for SCPC plant with and without CO 2 Capture (Case B12A and Case B12B of the DOE Baseline study, respectively). Case 2 with CO 2 regeneration at higher pressure results in the lower cost of CO 2 capture. The total capital cost of the capture process has been estimated using 2018 dollars in Aspen Process Economic Analyzer and was estimated to be $579 MM. The capture plant operation leads to a total parasitic power loss rate of 96 MWe, resulting in a decrease in pulverized coal power plant efficiency of 7.8% points. The resulting cost of electric power increases from 64.4 mills/kWh, for no capture, to 97.5 mills/kWh, with 90% capture, an increase of 51% in the COE. The cost of capturing 90% CO 2 was estimated to be $38.2/tonne-CO 2 , and meets the DOE target of $40/t-CO 2 . Emission control technologies (ECT) investigated in this project includes a second water wash with use of activated carbon beds for removal of amine from the wash water prior to recirculation in the water wash. These ECT allow operation of the CO 2 capture plant with < 1 ppm amine emissions with the treated flue gas and contributes to $2.4/t-CO 2 captured. Amine emissions derived from thermal and oxidative degradations were investigated under this project along with the emissions derived from aerosols for the NAS system. The thermally degraded of the lean NAS showed less than 4% decreased of the original total amine content in the NAS at 150 °C while the result obtained at 120 °C showed no drop in total amine content, suggesting that thermal degradation of the NAS is minimal. These results also suggested that the thermally degraded species are not likely formed and contributed to the emissions due to the low regeneration temperature of the NAS at 90-105 °C. The oxidative degradation, on the other hand, could become problematic as some of these oxidative degraded species were observed during the NAS-5 testing at National Carbon Capture Center (NCCC) and SINTEF in our previous project. The rapid screening of selected inhibitors suggested that oxidative degradation of NAS can be suppressed using thiol containing compounds in amounts of at least 1 mol%. The detailed mechanistic degradation pathway was conceived for a specific amine used in NAS formulation during BP2. he reduction of the nitrosamines caused by the NO x present in the flue gas was also examined. The study suggested that the thermo-chemical treatment of the NAS solvent would be a more effective and economically viable compared to removing NO x at the DCC.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Techno-Economic Impact of a Smart Battery Sorting System

Create analytical framework to capture costs and benefits of the automated sorting into battery recycling including the development and deployment of various types of battery recycling technologies such as pyrometallurgical, hydrometallurgical, and direct recycling. Li Industries, Inc. is a Virginia startup company focused on reinventing how lithium-ion batteries (LIBs) are recycled. Li Industries is focused on developing direct LIB recycling and automated battery sorting technologies in order to reduce the environmental impact of the LIB lifecycle. This work is to be conducted in support of the American-Made Challenges Lithium-Ion Battery Recycling Prize. Li Industries and NREL will work together to understand how novel technologies, such as those being developed by Li Industries, can impact the development and economics of the battery recycling industry. This voucher is being used to evaluate the profitability of an automated sorting system developed by Li Industries and the potential effect this increased value could have on the domestic lithium-ion battery (LIB) recycling industries in the United States. NREL has developed the Lithium-Ion Battery Resources Assessment (LIBRA) system dynamics model to project the future viability of the US LIB manufacturing and recycling industries under varying technoeconomic conditions and battery adoption scenarios over the coming decades. Additional logic was added to LIBRA to analyze the role automated sorting of recycling feedstock could play in the buildout of the industry and the impacts it has on the recovery of end-of-life (EOL) battery materials. This report summarizes the outcomes of this modeling analysis in the US context through a series of sensitivity analyses run for a range of values of a given input dimension and compared across the unsorted or automated sorting cases for LIB recycling feedstock. For greater detail on the process and analysis, the researchers are publishing a forthcoming journal article titled Techno-Economic Impact of a Smart Battery Sorting System for Lithium-Ion Battery Recycling and Mineral Recovery in the United States by Weigl, et al. In the event the article is not accepted by any currently seeking publication in academic or industry journal, it may be published by NREL. CRADA benefit to DOE, Participant, and US Taxpayer: assists laboratory in achieving programmatic scope competencies, uses the laboratory's core competencies.

25 ENERGY STORAGE↗
DOE OSTI2024

Multi-pronged approach to improving carbon utilization by cyanobacterial cultures

The goal of this project was to increase the efficiency of carbon utilization by a Synechocystis biofuel production strain in a photobioreactor system by at least 50% using a multi-pronged approach that combined the best features of both biological and physicochemical CO 2 capture technologies to: 1) increase rates and extent of CO 2 absorption into the culture medium by addition of biocompatible amine solvents and a nanobubble gas delivery system, and 2) increase cellular rates of inorganic carbon uptake and carbon fixation through genetic engineering. In addition, the project plan included evaluating the use of fermentation effluent gases as a CO 2 source and demonstrating performance under outdoor conditions in closed-pond photobioreactor systems. These combined efforts would be guided by integrated technoeconomic and life-cycle analyses. Both physicochemical CO 2 capture technologies explored proved to be successful. The amine solvent monoethanolamine (MEA) was found to be biocompatible with a Synechocystis laurate production strain. Using an adaptive evolution strategy, an MEA-tolerant laurate production strain was developed that showed significantly increased carbon utilization over the parent strain. To our knowledge this was the first time nanobubble (NB) technology had been used as a carbon delivery system for algae production and it also proved quite successful as a proof of concept. Solutions containing CO 2 nanobubbles (Nano-BG11) at concentrations significantly higher than the aqueous CO 2 concentrations achieved with gas sparging were successfully generated and characterized with regard to bubble size (nm), concentration (NB/L), and pH stability as per project plan. Growth studies proved challenging. However, once the source of a puzzling growth defect was found and remedied Synechocystis was able to grow somewhat better in Nano-BG11 than in standard BG11 medium.

09 BIOMASS FUELS↗
DOE OSTI2020

SENA Hydro Battery Systems Catalog Development

The Hydro Battery catalog development project started in 2017 with the objective of developing a collection of modular engineering design elements, repurposing oil & gas industry techniques and materials, that can be replicated for smaller, lower cost, and faster deploying pumped storage projects in the United States. One notable design element of the catalog involved a floating membrane containment system to achieve closed loop configurations in naturally open body environments. The intent of this particular system is to provide an option to mitigate environmental impacts at sites with technoeconomic merits but aquatics and water quality sensitivities to an alternative open-loop design.

13 HYDRO ENERGY↗
DOE OSTI2022

High Energy Systems for Transforming CO 2 to Valuable Products (Final Report)

The objective of this project is to develop the Direct E-Beam Synthesis (DEBS) process that uses high-energy electron beams (E-Beam) to break chemical bonds. This allows the production of valuable chemicals, such as acetic acid, methanol, and carbon monoxide, at relatively low severity (pressure near one atmosphere and temperatures <150°C) from near-pure CO 2 captured from a pulverized coal-fired power plant and methane, imported as natural gas. Creating such valuable products will offset the cost of carbon capture and storage. Through this project, we have designed, constructed, and operated an E-Beam reactor to examine the feasibility of performing dry reforming reaction without a catalyst using only DEBS. We have verified the production of syngas with 1:1 H2:CO ratio and calculated that the energy cost for conversion is about 5.2 eV/molecule of product for dry reforming reaction which is similar to the energy cost for conversion using conventional thermochemical conversion but under significantly milder conditions (room temperature and atmospheric pressure). We have performed a technoeconomic analysis (TEA) to estimate the total capital requirement and the cost of production for a 99.4 MMSCFD syngas production plant via non-catalytic Direct E-Beam Synthesis (DEBS) technology utilizing a high-energy electron beam (E-Beam) accelerator. No assumption is made for syngas utilization downstream, and the incoming reactants are pure CO 2 from carbon capture (assumed to be at zero cost) and natural gas. The Total As-Spent Cost (TASC) was calculated to be $\$242.5$ million, resulting in a levelized cost of syngas (LCOS) of $\$175.84$/tonne (metric) at a natural gas price of $\$6.24$/MMBTU1. The cost of syngas is primarily determined by the price of natural gas. If the cost of the CO 2 feedstock is assumed to be non-zero, then the price of the CO 2 feed also heavily influences the levelized cost of syngas. The potential impact on the cost of electricity from syngas revenue is significant. Following DOE NETL’s guidance, a lifecycle analysis (LCA) was conducted to compare the cradle-to-gate life cycle emissions of GTI Energy’s novel Direct E-Beam Synthesis (DEBS) process that produces syngas via the reaction of methane and carbon dioxide to the emissions of a state-of-the-art Steam Methane Reforming (SMR) process that also produces syngas via the reaction of methane and steam. The DEBS process results in less GHG emissions than SMR (with CO product as the basis of comparison). openLCA was used for the LCA and the results show that the total global warming potential (GWP) of DEBS is 0.981 kg CO 2 e per kg CO product, while the SMR process has a global warming potential of 2.573 kg CO 2 e per kg CO product. The ratio of the GWP of the proposed product system to the comparison product system is 0.381. This percent change is 61.9% lower GWP than SMR.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Development of a Fuel Cell for the Perhydrodibenzyltoluene / Dibenzyltolluene Fuel Pair

An experimental study of the performance of an LFC with H-DBT and other cyclic hydrogenated aromatic fuels was carried out, along with a characterization of the fuel cell conversion products. A technoeconomic analysis (TEA) of the LFC operating in a class 8 truck powertrain using the H-DBT / DBT fuel pair was completed to determine the total cost of ownership (TCO), comparing LFC vehicles (LFCVs) to HFC vehicles (HFCVs), battery electric vehicles (BEVs), and diesel trucks on a pro-forma basis assuming the LFC could be developed to HFC benchmarks.

08 HYDROGEN↗
DOE OSTI2022

Use Cases and Model Development of Thermal Storage Coupling for Advanced Nuclear Reactors

This report discusses the different options for coupling thermal energy storage (TES) systems to advanced nuclear power plants (A-NPPs) in order to enable flexible and hybrid plant operation. An advanced light-water reactor (ALWR) and a high-temperature gas-cooled reactor (HTGR) were selected as the initial use cases for demonstrating a thermally balanced energy storage coupling design for thermal power extraction. Cost functions for the A-LWR were derived from the fully balanced models that were developed based on three different coupling options with three different thermal energy bypass ratios. For the next steps, cost functions for the HTGR will also be derived, and additional nuclear reactors (e.g., a liquid-cooled fast reactor [LFR] or molten-salt reactor [MSR]) will be evaluated for coupling with TES in similar fashion, including the evaluation of their steady-state condition models and cost functions. The models presented herein showcase several design considerations, focusing on optimal deployment methodologies for achieving steady-state operation with minimum disruption to the nuclear power generation cycle. This report presents the results of steady state models developed using Aspen HYSYS®, wherein the thermal energy bypass for an NPP-TES coupling was varied up to 50%. The various components were sized using Aspen Process Economic Analyzer (APEA) and Aspen Exchanger Design and Rating (EDR), when applicable. Cost functions from these models were developed using the latest publicly available data obtained from APEA V11. The current steady-state models and cost functions provide a baseline for additional work focusing on dynamic operation and process optimization by using Idaho National Laboratory (INL)’s Framework for Optimization of Resources and Economics (FORCE) tools to evaluate the technoeconomic viability and transient operations of TES-coupled A-NPPs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

FORCE-DISPATCHES Integration - Initial Demonstration

Integrated energy systems (IES) combine, in mutually beneficial ways, power from variable renewable energy sources and nuclear power plants (NPP) to improve economic viability under uncertain market and weather conditions. The open-source Framework for Optimization of Resources and Economics (FORCE) tool suite, developed at Idaho National Laboratory (INL), has enabled comprehensive modeling and simulation of IES. The capabilities within FORCE include grid portfolio optimization through the Holistic Energy Resource Optimization Network (HERON) and the transient process model analysis library HYBRID, among others. Continuous efforts and investments from the IES programs have been made to expand and improve the versatility of the FORCE toolset in fiscal year 2022. Code-coupling and cross-tool communication have been important methods for improving this versatility. This report focuses on an additional workflow in the HERON tool for capacity and dispatch stochastic optimization through integration with the external tool Design Integration and Synthesis Platform to Advance Tightly Coupled Hybrid Energy Systems (DISPATCHES). DISPATCHES was primarily developed by the National Energy Technology Laboratory, in collaboration with other national laboratories, which included INL, universities, and industry partners. It is coupled to a library of algebraic models for specific plant components, and to a framework for stochastic optimization different from that provided in the current Risk Analysis Virtual Environment (RAVEN)-running-RAVEN algorithm in HERON. HERON currently conducts stochastic optimization via an outer-inner loop: it optimizes over variable capacity on the outer loop, and at each step within the capacity parameter space, conducts an inner optimization over scenarios (of market signals, demand, and/or weather patterns) and hourly dispatch throughout a user-specified number of years. On the other hand, DISPATCHES conducts stochastic optimization via an “all-at-once” strategy in which capacity variables are optimized at the same level as dispatch variables, as all scenarios are considered at once. The latter method works especially well for projects of limited size and project length, as the necessary computational power and memory increases with the number of variables and scenarios. The new capability to use the DISPATCHES workflow in HERON enhances standalone simulations by leveraging FORCE tools—namely, the economic metrics from the Tool for Economic Analysis (TEAL) and reduced-order model (ROM) sampling from RAVEN. The initial demonstration of the DISPATCHES workflow simulates an existing nuclear-case flowsheet within the DISPATCHES repository—this models a NPP with a secondary revenue stream for hydrogen production. Electrical output from the plant is converted to hydrogen via a proton-exchange membrane (PEM) electrolyzer, hydrogen tanks are used for storage, and an additional turbine is added for hydrogen combustion. Continued work regarding this FORCE-DISPATCHES integration will include automatic generation of DISPATCHES models from HERON inputs, offering analysts the option of using either the RAVEN-runsRAVEN or DISPATCHES workflow to solve technoeconomic optimization problems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Intermountain West Energy Sustainability & Transitions Initiative: CO 2 Transport and Geologic Storage Modeling Results

This report and its associated Excel spreadsheet file provide the results of technoeconomic modeling of carbon dioxide (CO 2 ) pipeline transport modeling, CO 2 storage in deep saline subsurface formations, and CO 2 enhanced oil recovery (EOR). This report provides the methodology, describes the models and summarizes results for the three aspects of the analysis done for the Intermountain West Energy Sustainability and Transition (I-WEST) Initiative.

42 ENGINEERING↗
DOE OSTI2022

SECARB-USA: Preliminary Regional Commercialization Plan (Task 4.4.a)

The SECARB-USA region refers to the states in the southeastern portion of the United States including Alabama, Arkansas, Florida, Georgia, Kentucky, Louisiana, Mississippi, Missouri, North Carolina, eastern Oklahoma, South Carolina, Tennessee, eastern Texas, Virginia, and West Virginia. This region is a hub for economic activity and accordingly emits almost 1 Gtpa of CO 2 which is the motivation for the development of Carbon Capture and Storage (CCS). This preliminary commercialization plan reviews the status of commercialization of CCS within the region, outlines the infrastructure buildout to achieve CO 2 reduction goals by 2050 described by the Los Alamos National Lab in Task 4.1.b (see the Task 4.1.b “Technoeconomic Analysis of Infrastructure Buildout Scenarios” report), and provides an early estimate of the economic activity and employment creation resulting from the increase in CCS activity. Additionally, this report addresses the challenges associated with commercializing CCS within the region at a large scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Improved Value of the Gasoline and Fuel Oil Co-Product Fractions Generated by the PNNL/LanzaTech Alcohol-to-Jet Process (Final Report)

The BETO-funded PNNL collaboration with LanzaTech, Inc. utilizes patented technology to address the need for low aromatic jet fuel blendstocks. The PNNL/LanzaTech alcohol-to-jet (ATJ) process converts ethanol from LanzaTech’s syngas fermentation process to jet-range isoparaffins. The aim of this Cooperative Research Development Agreement (CRADA) project was to improve the commercial viability of the LanzaTech/ PNNL ATJ process by developing two new co-product options. Two Focus Areas (FA) were explored: FA1) Increasing the RON of the lighter-than-jet gasoline fraction above 98; and FA2) Creating a synthetic lubricant base oil from the heavier-than-jet fraction. For FA 1, multiple processing approaches were evaluated, and RONs ranging from 96-100 were obtained, each comprising different processing costs. The most cost effective approach identified was a single-step process and yielded a liquid product of 97. Thus, additional development is required to obtain a RON > 98. We will continue work on this focus area with separate Direct Funding Opportunity (DFO) funding within the DOE-BETO Co-Optima Consortium (expected to begin Q2-FY21). Experimental work will focus on i) increasing single pass conversion to > 50%, and ii) obtaining a > 98 RON product. Technoeconomic analysis performed in this project suggests cost competitiveness provided these technical targets can be met. For FA2, multiple approaches were evaluated for increasing the viscosity index (VI) of the heavier-than-jet fraction to at least 120 in order to meet ASTM specifications for a Group III Base Oil (ASTM D6074). All other ASTM specifications are already met. A viscosity index of 115 was obtained, and with minimal undesirable cracking products. We believe a VI of 115 is about the highest possible from a catalytic approach, per review of the patent literature. In order to further increase the VI to > 120 we believe additives and/or liquid-liquid extraction is required. TEA performed earlier in the project suggests cost competitiveness with market prices assuming cracking byproducts are kept < 10 wt.%. If TEA updated with this additional processing still projects economic feasibility next steps could be taken in a subsequent effort.

02 PETROLEUM↗
DOE OSTI2023

Synthetic Electricity Market Data Generation and HERON Use Case Setup of Advanced Nuclear Reactors Coupled with Thermal Energy Storage Systems

This study evaluates and optimizes advanced nuclear reactors coupled with thermal energy storage (TES) systems in an Integrated Energy System (IES) architecture to enable advanced nuclear power plants (A NPP) to participate in multi-commodity markets, thus enhancing their economic competitiveness. Nuclear-TES coupling scenarios studied herein are designed attenuate the nuclear heat dynamics and defer energy delivery to a later time, enabling the nuclear reactor to continue operating at or near steady-state design conditions as usual while also enabling flexible generation. Three A-NPPs, namely, an advanced light-water reactor (A LWR), a high temperature gas-cooled reactor (HTGR) and a liquid-metal fast reactor (LMFR) were selected as the initial use cases for demonstrating the technoeconomic of thermally balanced energy storage coupling design for thermal power extraction. Each of the reactor technologies were evaluated in two different electricity markets. Stochastic optimization approach was adopted which included the evaluation of price signals from the Pennsylvania-New Jersey-Maryland (PJM) market, and Electric Reliability Council of Texas (ERCOT), using an autoregressive moving average (ARMA) model. Risk Analysis Virtual Environment (RAVEN) tool and its dispatch optimization plugin, the Holistic Energy Resource Optimization Network (HERON), were used to perform dispatch and capacity optimization, using the price data provided by the ARMA models. The results from the Nuclear-TES use cases will be used to design and characterize dynamic integrated system behavior and feedback.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Electrochemical Reduction of Flue Gas Carbon Dioxide to Commercially Viable C2-C4 Products (Final Report)

This is the final scientific/technical report for a DOE project focused on the electrochemical conversion of CO 2 in non-aqueous solvents to novel products. Electrochemical reduction of CO 2 provides an attractive route to produce valuable fuels and chemicals that can simultaneously lower greenhouse gas emissions when powered by renewable electricity. While recent technological advances have shown the feasibility of industrial CO 2 electroreduction, many challenges remain to improve this technology and expand the list of economically viable products. The vast majority of electrochemical CO 2 reduction research has been conducted in aqueous media under neutral to alkaline conditions, leading to commonly reported products including carbon monoxide, formic acid, methane, methanol, ethylene, acetic acid, and ethanol. In comparison, non-aqueous media for CO 2 reduction has been underexplored but represents a possible avenue to yield new products and improved operating conditions. The aim of the project was to convert waste CO 2 in the form of flue gas to a multicarbon C2 - C4 chemical product in a reactor designed to achieve economically competitive values of current density and selectivity. The project strived to advance the technology readiness of an electrochemical CO 2 reduction process in alcohol solvents from the proof-of-concept stage to a device capable of meeting performance metrics for commercial viability. In the initial plan, the University of Louisville researchers were to focus on investigating the electrochemical process and improving the faradaic efficiency for novel C2 – C4 species, while also working on a parallel effort to build a practical electrolysis reactor to markedly increase the CO 2 reduction current density. The reactor development effort also aimed to engineer a dual-electrolyte feed strategy with non-aqueous catholyte and aqueous anolyte to promote water oxidation as the coupling anodic half-reaction to enable a sustainable and economical overall process. At the outset, the University of North Dakota was to investigate the feasibility of operating directly from coal-derived flue gas without separate capture and purification. The research team sought to determine impurity effects and test mitigation strategies, as well as engineer the gaseous feed system for high reactor tolerance to lower CO 2 concentration. In the last half year of the project, the focus was planned to shift to integrating the advances in the catalysis, electrochemical conditions, reactor design, and flue gas compatibility into a fully functional device and improve it for maximum current density and faradaic efficiency for C2 – C4 species. Knowledge of the full system components, constraints, and maximum performance was then to be used as the basis for a thorough technoeconomic analysis (TEA) and life cycle analysis (LCA) at the end of the project.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Solar Thermochemical Ammonia Production (STAP) (Final Report)

Ammonia (NH 3 ) is an energy-dense chemical and a vital component of fertilizer. In addition, it is a carbon-neutral liquid fuel and a potential candidate for thermochemical energy storage for high-temperature concentrating solar power (CSP). Currently, NH 3 synthesis occurs via the Haber-Bosch process, which requires high pressures (15-25 MPa) and medium to high temperatures (400-500 °C). N 2 and H 2 are essential feedstocks for this NH 3 production process. H 2 is generally derived from methane via steam reforming; N 2 is sourced from air, after oxygen removal via combustion of hydrocarbons. Both processes consume hydrocarbons, resulting in the release of CO 2 . In addition, hydrocarbon fuels are burned to produce the heat and mechanical energy required to perform the NH 3 reaction, further increasing CO 2 emissions. Overall, the production of ammonia via the Haber-Bosch (H-B) process is responsible for up to 1.4% of the world’s carbon emissions. The development of a renewable pathway to NH 3 synthesis, which utilizes concentrated solar irradiation as a process heat instead of fossil fuels and operates under low or ambient pressure, will result in a decrease (or elimination) of greenhouse gas emissions as well as avoid the cost, complexity, and safety issues inherent in high-pressure processes. Most current efforts to “green” ammonia production involve either electrolysis or simply replacing the energy source for H-B with renewable electricity, but otherwise leaving the process intact. The effort proposed here would create a new paradigm for the synthesis of NH 3 utilizing solar-thermal heat, water, and air as feedstocks, providing a truly green method of production. The overall objective of the STAP (Solar Thermal Ammonia Production) project was to develop a solar thermochemical looping technology to produce and store nitrogen (N 2 ) from air for the subsequent production of ammonia (NH 3 ) via an advanced two-stage process. The goal is a cost-effective and energy efficient technology for the renewable N 2 production and synthesis of NH 3 from H 2 (produced from H 2 O) and air using solar-thermal energy from concentrating sunlight, under pressures an order of magnitude lower than H-B NH 3 production. Our process involves two looping cycles, which do not require catalysts and can be recycled. Over the course of the STAP project, we (1) developed and deeply characterized oxide materials for N 2 separation; (2) developed a method for the synthesis of metal nitrides, producing a series of quaternary compounds that have been heretofore unreported; (3) modeled, designed, and fabricated bench-scale tube and on-sun reactors for the N 2 production step and demonstrated the ability to separate N 2 over multiple cycles in the tube reactor; (4) designed and fabricated a bench-scale Ammonia Synthesis Reactor (ASR) and demonstrated the proof of concept of NH 3 synthesis via a novel looping process using metal nitrides over multiple cycles; and (5) completed a systems- and technoeconomic analysis showing the feasibility of ammonia production on a larger scale via the STAP process. The development of renewable, low-cost NH 3 will be of great interest to the chemicals industry, particularly agricultural sectors. The CSP industry should be both an important customer and potential end-user of this technology, as it affords the capability of synthesizing a promising thermochemical storage material on-site. Since the NH 3 synthesis step also requires H 2 , there will exist a symbiotic relationship between this technology and solar-thermochemical water-splitting applications. Green ammonia synthesis will result in the decarbonization of a hydrocarbon-intensive industry, helping to meet the Administration goal of industrial decarbonization by 2050. The resulting decrease in CO 2 and related pollutants will improve health and well-being of society, particularly for those living in the vicinity of commercial production plants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lignin Derived Ionic Liquids: Synthesis and Application for Biopolymer Processing (CRADA Final Report)

We have established a scalable and economically viable process to convert lignin into ionic liquids for use in biopolymer processing. We have studied the four main topics: 1) lignin depolymerization to produce vanillin through oxidation, 2) lignin reduction to produce guaiacols, 3) oxidation process scale up, and 4) ionic liquid synthesis and application for biopolymer processing. The main accomplishment is summarized below: A maximal vanillin yield of 4.9% (8.8% total product yield) was achieved under optimal oxidation conditions using design of experiments (DOE); Aminophenol with 94.5% purity was synthesized via reductive amination using vanillin isolated from ion-exchange chromatography; At a higher lignin loading (10%), the vanillin yield in the scale up reaction was lower than the bench scale reaction; The filtration-based downstream separation of the scale-up process was able to recover 76% of vanillin; A maximal lignin reduction product (guaiacols) yield of 6.5% was achieved in the presence of Ru/C, formic acid, and methanol; The lignin reduction product yield and composition were affected by the use of different solvent and catalytic reagents (methanol in combination of Ru/C and formic acid gives the highest product yield); Lignin oxidation and reduction products: vanillin, acetovanillone, guaiacols, and eugenol are successfully used for IL synthesis; XX based ILs showed cellulose solubility with up to xx%; Technoeconomic analysis results indicate the potential of producing affordable ILs from kraft lignin (MSP: $14/kg); Life-cycle assessment results show the potential to reduce GHG emissions by up to 85% relative to existing ILs ([Ch][Lys]) with GHG emission: 1.2 kg CO 2e /kg of IL produced.

09 BIOMASS FUELS↗
DOE OSTI2023

Unlocking Metamaterials At The Macro Scale (CRADA Final Report)

This project was part of the Cyclotron Road program, which supports scientific entrepreneurs in their efforts to commercialize novel technologies with potential to address energy, manufacturing and climate related issues. The participants' technology is a lightweight cellular material system which could be applied to a range of products and markets and offer benefits of reduced weight, cost, waste, and carbon footprint. The objective of the project was to investigate potential opportunities and de-risk technical and market barriers in pursuit of successful commercialization. This project’s purpose was to find market pathways and technical roadmaps for commercializing the lightweight cellular material technology. The main problems to overcome are the risks in both tech and market. On the technical side, performance, weight, cost and speed of manufacturing, and other scaleup problems needed to be addressed. On the market side, the challenges included finding product/market fit, developing business models and go to market strategies, and developing commercial relationships within various industries. Our approach typically started with market analysis, in order to identify potential applications where our technology could solve problems and address pain points. To do this, we performed customer discovery, interviewing hundreds of industry stakeholders along all parts of the value chain for a given product or industry. From here, we would develop technoeconomic models which combined aspects of numerical modeling for structural and mechanical performance based on criteria from customers or industry guidelines such as stiffness, strength, weight, and other physical properties. Then, this would be combined with detailed cost models to translate the engineering solution into a manufacturable, scalable product. The challenge here was to have equal or better performance at lower cost and higher speed than existing solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

SPERLU Selective Process for Efficient Removal of Lignin and Upgrading (Final Technical Report)

To meet the growing demand for bio-based chemicals and improve the profitability and efficiency of the emerging biorefinery industry, lignin is an abundant and attractive feedstock. Spero Renewables has developed a proprietary and patent-pending technology, the Selective Process for Efficient Removal of Lignin and Upgrading (SPERLU). The technology is a catalytic deconstruction and upgrading of lignin in lignocellulosic biomass or commercially available technical lignin to produce multi-functional phenol (MFP) products. The SPERLU process has been demonstrated and vetted on a lab scale to convert commercially available technical lignin to MFPs in yields of 60-90% (based on lignin). The MFP products can be separated and further upgraded through catalytic or biological means. Spero performed a detailed kinetic study of the SPERLU process and used the resulting kinetic data to design and construct a mini-pilot-scale reactor for routine production of hundreds of grams of MFP products. Spero’s lignin-based MFPs have been demonstrated for use as a drop-in replacement for bisphenol A (BPA) in the synthesis of thermoset polymers. Spero’s lignin-based thermoset polymers exhibit excellent mechanical properties and can be used in many applications. Additionally, a collaboration with the National Renewable Energy Lab (NREL) was used to evaluate the feasibility of upgrading SPERLU products through biological means into valuable chemicals. A comprehensive technoeconomic analysis (TEA) and Life-cycle analysis (LCA) have been completed and support the case for commercialization of the SPERLU technology. Through this project Spero has significantly de-risked the SPERLU technology and is actively planning larger scale pilot projects.

09 BIOMASS FUELS↗