Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Pretreatment Effects on the Surface Chemistry of Small Oxygenates on Molybdenum Trioxide

Understanding surface reactions of biomass-derived oxygenates on metal oxides is important for designing catalysts for valorization of biomass. As such, This work elucidated the effect of different pretreatments on molybdenum trioxide (MoO 3 ) to understand how surface reactivity is controlled by the surface oxidation state. The catalyst was pretreated in oxidative, inert, and reducing environments. The inert and reducing pretreatments created oxygen vacancies on the catalyst surface that acted as active sites for the adsorption of oxygenated molecules, with the reducing pretreatment yielding a higher density of these active sites. Exposing the catalyst to an alcoholic solvent such as methanol also led to a partial reduction similar to the inert pretreatment. After pretreatment, the catalyst was exposed to ethanol, acetaldehyde, and crotonaldehyde with subsequent characterization by diffuse reflectance infrared spectroscopy (DRIFTS), temperature-programmed desorption (TPD), X-ray absorption near edge spectroscopy (XANES), and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) was also used to determine adsorption configurations and energies of ethanol, acetaldehyde, and crotonaldehyde. Reduced surfaces were shown to have a stronger affinity for carbonyls, leading to a higher activity for the aldol condensation of acetaldehyde and ethanol to C 4 molecules. Catalysts pretreated in an oxidative environment were completely inactive toward chemisorption and reaction of acetaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying Support Effects in Au-Catalyzed CO Oxidation

Some catalytic oxide supports are more equal than others, with numerous variable properties ranging from crystal symmetry to surface chemistry and electronic structure. As a consequence, it is often very difficult to determine which of these act as the driver of performance changes observed in catalysis. In this work, we hold many of these variable properties constant with structurally similar LnScO 3 (Ln = La, Sm, and Nd) nanoparticle supports with cuboidal shapes and a common Sc-rich surface termination. Using CO oxidation over supported Au nanoparticles as a probe reaction, we observe higher activation energy and a slower rate using NdScO 3 as the support material. This change is found to correlate to the strength of CO 2 binding to the support surface, identified by temperature-programmed desorption measurements. Furthermore, the change is due to differences in the 4f electrons of the lanthanide cations, the cations’ Lewis acidity, and the inductive effect they impose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗

Controlling Selective C–O and C–H Bond Scission of Methanol by Supporting Pt on TiN and Mo 2 N Model Surfaces and Powder Catalysts

Transition metal nitrides (TMNs) have been explored as effective supports for Pt due to their Pt-like electronic properties. However, there is a lack of fundamental understanding regarding the behavior of Pt on different TMNs (Pt/TMN). Herein two TMNs, Mo 2 N and TiN, were modified with Pt and compared using methanol decomposition as a probe reaction via both ultrahigh vacuum (UHV) studies on thin films and ambient-pressure batch reactor studies of powder catalysts. Temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS) measurements were conducted under UHV conditions with Mo 2 N and TiN thin films. Mo 2 N was shown to favor C–H bond scission to form CO with a 56.2% selectivity, while TiN favored C–O bond scission to form CH 4 with a 74.5% selectivity. The addition of 0.9 monolayers (MLs) of Pt increased C–H bond scission selectivity to 89.7% and 49.2% for Mo 2 N and TiN respectively. Density functional theory (DFT) calculations on model surfaces revealed that the binding energy of O (BE *O ) was significantly reduced on Pt/TMNs, from −4.02 eV on Mo 2 N to −1.31 eV on Pt/Mo 2 N and −4.74 eV on TiN to −1.37 eV on Pt/TiN. As a result, C–O bond scission pathways were suppressed, leading to the preferential C–H bond scission that was observed experimentally. The C–O and C–H bond scission trends observed on thin films were then extended to powder catalysts, which demonstrated similar trends toward methanol decomposition. In conclusion, results from the current study establish that by combining UHV studies and DFT calculations over model surfaces, one can effectively predict the catalytic behavior of realistic TMN powder catalysts.

08 HYDROGEN↗

Reactivity of Hydrogen on and in Nanostructured Molybdenum Nitride: Crotonaldehyde Hydrogenation

Early-transition-metal nitrides, including γ-Mo 2 N, are active and selective for a variety of reactions, including the hydrogenation of organics (e.g., hydrodeoxygenation), CO (e.g., Fischer–Tropsch synthesis), and CO 2 . In addition to adsorbing hydrogen onto the surface, some of these materials can incorporate hydrogen into subsurface, interstitial sites. Research described in this paper examined, experimentally and computationally, the nature of hydrogen on and in γ-Mo 2 N, with a particular focus on characterizing the interactions of these hydrogens with crotonaldehyde. Hydrogen was added to γ-Mo 2 N via exposure to gaseous hydrogen at elevated temperatures, forming γ-Mo 2 N-H x , where 0.061< x < 0.082. Temperature-programmed desorption (TPD) experiments indicate that γ-Mo 2 N-H x has at least two distinct hydrogen binding sites and that these sites can be selectively populated. Inelastic neutron scattering and density functional theory calculations indicate the presence of surface nitrogen-bound (κ 1 -NH surf ), surface Mo-bound (κ 1 -MoHsurf), and interstitial Mo-bound (μ 6 -Mo 6 H sub ) hydrogens. Selectivities for the hydrogenation of crotonaldehyde, a model of species in biomass-derived liquids, correlated with the populations at these sites. Importantly, materials with high densities of interstitial, hydridic hydrogen were selective for C=O hydrogenation (i.e., formation of crotyl alcohol). Collectively the results provide mechanistic insights regarding the desorption and reactivity of hydrogen on and in γ-Mo 2 N. Hydrogen adsorption/desorption to γ-Mo 2 N is heterolytic; in particular, H 2 adds across a Mo–N bond. Because the surface Mo–H site is energetically unfavorable in comparison to the interstitial site, hydrogen migrates into interstitial sites once the surface NH sites are saturated. Crotonaldehyde adsorption facilitates migration of this interstitial hydrogen back to the surface, forming surface Mo–H that is selective for hydrogenation of the C=O bond. These insights will facilitate the design of γ-Mo 2 N and other early-transition-metal nitrides for catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Role of M/Pt(111) (M = Fe, Co, Ni, Cu) Bimetallic Surfaces for Selective Hydrodeoxygenation of Furfural

Selectively cleaving the C=O bond of the aldehyde group in furfural is critical for converting this biomass-derived platform chemical to an important biofuel molecule, 2-methylfuran. This work combined density functional theory (DFT) calculations and temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS) measurements to investigate the hydrodeoxygenation (HDO) activity of furfural on bimetallic surfaces prepared by modifying Pt(111) with 3d transition metals (Cu, Ni, Fe, and Co). The stronger binding energy of furfural and higher tilted degree of the furan ring on the Co-terminated bimetallic surface resulted in a higher activity for furfural HDO to produce 2-methylfuran in comparison to that on either Pt(111) or Pt-terminated PtCoPt(111). The 3d-terminated bimetallic surfaces with strongly oxophilic 3d metals (Co and Fe) showed higher 2-methylfuran yield in comparison to those surfaces modified with weakly oxophilic 3d metals (Cu and Ni). The effect of oxygen on the HDO selectivity was also investigated on oxygen-modified bimetallic surfaces, revealing that the presence of surface oxygen resulted in a decrease in 2-methylfuran yield. Furthermore, the combined theoretical and experimental results presented here should provide useful guidance for designing Pt-based bimetallic HDO catalysts.

2-methylfuran↗

Zeolite-Catalyzed Isobutene Amination: Mechanism and Kinetics

Amination of isobutene with NH 3 was researched over Brønsted acidic zeolites at 1 atm and 453-483 K. To compare catalytic activities over different zeolites, the measured reaction rates are normalized by the number of active sites determined by tert-butylamine temperature-programmed desorption (TPD). Small- and medium-pore zeolites with one-dimensional channels exhibit low activity because of pore blockage by adsorbed tert-butylammonium ions. Yet, turnover frequencies and activation energies are not sensitive to framework identity, as long as the active site is accessible to isobutene and tert-butylamine. Kinetic measurements and FTIR spectroscopy reveal that the Brønsted acid sites in MFI are covered predominantly with tert-butylammonium ions under reaction conditions. The desorption of tert-butylamine is assisted by the concurrent adsorption of isobutene. DFT simulations show that at very low tert-butylamine partial pressures, for example, at the inlet to the reactor, tert-butylamine desorption is rate-limiting. However, at sufficiently high tert-butylamine partial pressures (>0.03 kPa), protonation of isobutene to the corresponding carbenium ion limits the rate of amination.

2-methylpropene↗

Effects of Phosphonic Acid Monolayers on the Dehydration Mechanism of Aliphatic Alcohols on TiO 2

The kinetics for surface-catalyzed alcohol dehydration reactions often depend on the structure of the alcohol. Studies of structure–activity relations across primary, secondary, and tertiary alcohols can provide fundamental information on the nature of active sites on the surface. Here in this paper, we investigated the dehydration of 1-butanol, 2-butanol, and tert-butanol over TiO 2 anatase catalysts modified with various phosphonic acid (PA) self-assembled monolayers (SAMs). As a response to the presence of PAs, the three C4 alcohol isomers showed different dehydration rates, with 1-butanol dehydration being enhanced to the greatest extent by PA modification. Furthermore, the fluorinated, more polar 4-fluorobenzylphosphonic acid outperformed alkyl PAs across all alcohols. Steady-state kinetic measurements and temperature-programmed desorption studies indicated that PA SAMs significantly lowered the dehydration activation barrier; the extent of reduction in the barrier was sensitive to both the substitution of the alcohol and the charge distribution on the PA in a way that was consistent with stabilization of a carbenium-like transition state. Overall, the effect of PA modifiers on alcohol dehydration rates was found to be determined from a balance between transition state stabilization and active site blocking effects, with the potential to tune activity and selectivity based on the structure and coverage of the SAM.

09 BIOMASS FUELS↗

Distinct Gas-Particle Partitioning and Viscosity Characteristics of Secondary Organic Aerosols Derived from α-Pinene versus Ocimene

Secondary organic aerosols (SOA) have complex, multicomponent composition that controls particle viscosity and gas-particle partitioning, key factors to their atmospheric evolution. This study investigates the chemical composition, volatility and viscosity of SOA formed by ozonolysis of cyclic α-pinene (PSOA) and acyclic ocimene (OSOA) monoterpenes. Using Temperature-Programmed Desorption combined with Direct Analysis in Real-Time ionization and High-Resolution Mass Spectrometry, we determined the molecular composition and saturation mass concentration of individual SOA constituents. These data enabled gas-particle partitioning and viscosity estimates under varied atmospheric conditions. PSOA, composed of higher molecular weight and less oxidized species, shows higher condensability and viscosity under high total organic mass (tOM) loadings. Here, in contrast, OSOA, consisting of more oxidized, lower molecular weight species, exhibits greater sensitivity to tOM, with viscosity increasing significantly upon dilution. Poke-flow experiments support this trend, indicating that OSOA undergoes more dynamic compositional and phase changes during atmospheric aging. These observations reveal distinct dynamic trends in the atmospheric transformations and reactivity of SOA from cyclic and acyclic monoterpenes, with the latter showing greater compositional changes during aging that alter viscosity and diffusion. This highlights the importance of incorporating such dynamic transformations into atmospheric models to improve predictions of SOA atmospheric loadings, lifetimes, and impacts.

cyclic and acyclic monoterpenes↗

Characterization and Catalytic Upgrading of Aqueous Stream Carbon from Catalytic Fast Pyrolysis of Biomass

Catalytic fast pyrolysis (CFP) of biomass produces a liquid product consisting of organic and aqueous streams. The organic stream is typically slated for hydrotreating to produce hydrocarbon biofuels, while the aqueous stream is considered a waste stream, resulting in the loss of residual biogenic carbon. Here, we report the detailed characterization and catalytic conversion of a CFP wastewater stream with the ultimate aim to improve overall biomass utilization within a thermochemical biorefinery. An aqueous stream derived from CFP of beech wood was comprehensively characterized, quantifying 53 organic compounds to a total of 17% organics. The most abundant classes of compounds are acids, aldehydes, and alcohols. The most abundant components identified in the aqueous stream were C1-C2 organics, comprising 6.40% acetic acid, 2.16% methanol, and 1.84% formaldehyde on wet basis. The CFP aqueous stream was catalytically upgraded to olefins and aromatic hydrocarbons using a Ga/HZSM-5 catalyst at 500 degrees C. When the conversion yield of the upgraded products was measured with fresh, active catalyst, 33% of the carbon in the aqueous stream was recovered as aromatic hydrocarbons and 29% as olefins. The majority of the experiments were conducted using a molecular beam mass spectrometer and separate GC-MS/FID experiments were used to confirm the assignments and quantification of products with fresh excess catalyst. The recovered 62% carbon in the form of olefins and aromatics can be used to make coproducts and/or fuels potentially improving biorefinery economics and sustainability. Spent catalysts were collected after exposure to varying amounts of the feed, and were characterized using multipoint-Brunauer-Emmett-Teller (BET) adsorption, ammonia temperature programmed desorption (TPD), and thermogravimetric analysis (TGA) to monitor deactivation of Ga/HZSM-5. These characterization data revealed that deactivation was caused by coke deposits, which blocked access to active sites of the catalyst and spent catalysts regained total activity after regeneration.

09 BIOMASS FUELS↗

Selective Hydrogenation of Biomass-Derived 2(5H)-Furanone to γ-Butyrolactone over Ni-Based Bimetallic Catalysts

2(5H)-Furanone was selectively hydrogenated to γ-butyrolactone (GBL) over Ni-based bimetallic catalysts, Ni-M/SiO2 (M = Fe, Co, Cu, and Zn). Catalyst characterization showed that the metal dispersion and reducibility were changed after introducing a second metal, while the physical morphology was nearly unchanged. The most active and selective bimetallic catalyst was found to be Ni–Fe/SiO2. The reaction rate constant over the 4 wt %Ni–1 wt %Fe/SiO2 bimetallic catalyst was 0.06 min–1, doubling that over 5 wt %Ni/SiO2, and the selectivity to GBL increased slightly from 86.1 to 89.5%. The Fe/(Ni+Fe) weight ratio was changed to optimize the promoting effect of Fe. The Ni–Fe bimetallic effect was further investigated using temperature-programmed desorption experiments on single crystal model surfaces with different Fe/Ni(111) structures, revealing that the enhanced catalyst activity was mainly contributed by the formation of the Ni–Fe surface alloy.

bio-inspired↗

Catalytic Hot-Gas Filtration with a Supported Heteropolyacid Catalyst for Preconditioning Biomass Pyrolysis Vapors

During ex situ catalytic fast pyrolysis (CFP) of biomass, the separation of reactive char and alkali/alkaline particulates from biomass pyrolysis vapors by hot-gas filtration (HGF) leads to improved vapor stability and quality. HGF in tandem with chemical tailoring (e.g., partial deoxygenation) of the clean pyrolysis vapors, denoted as catalytic hot-gas filtration (CHGF), has the potential to further improve vapor composition by removing reactive oxygen moieties and protect downstream upgrading catalysts from fouling. Downstream upgrading refers to both vapor phase upgrading (e.g., ex situ CFP) and condensed phase upgrading (e.g., hydrotreating). Consequently, CHGF (as a single unit operation) was evaluated for preconditioning pyrolysis vapors for downstream upgrading processes. In order to understand the effective operating conditions that successfully filter and partially deoxygenate pyrolysis vapors, a titania-supported molybdenum heteropolyacid (Mo-HPA/TiO 2 ) catalyst was studied for use in CHGF. Here, pine pyrolysis vapors were generated in a small pilot-scale pyrolyzer and transferred to a CHGF unit via a continuous-flow slipstream. In the CHGF unit, the pyrolysis vapors were filtered and upgraded over a packed Mo-HPA/TiO 2 catalyst bed. Real-time monitoring and identification of the products formed were achieved by molecular beam mass spectrometry. The results showed that under a hydrogen-rich environment, the pine vapors were partially deoxygenated and alkylated over the Mo-HPA/TiO 2 catalyst. Reactivity studies revealed that an increase in hydrogen concentration and a reduction in weight-hourly space velocity enhanced deoxygenation and alkylation. Time-on-stream (TOS) studies showed stable product formation up to 1 h with little change in catalyst activity. Additionally, the liquid product was collected using a custom fractional condensation unit (built in-house) and analyzed by gas chromatography mass spectrometry to confirm that the product was partially deoxygenated and alkylated. The combination of CHGF and fractional condensation allowed for chemical and physical removal of both foulant and value-added compounds (e.g., phenols, alkylphenols, methoxyphenols, cyclopentenones) for additional enhancement of downstream upgrading processes. The pre- and postreaction catalysts were characterized using temperature-programmed desorption, N 2 physisorption, and elemental analysis with results indicating some catalyst coking. A hydrogen-based catalyst regeneration procedure restored the reacted catalyst activity to that of fresh Mo-HPA/TiO 2 .

09 BIOMASS FUELS↗

Preparation of organic sulfur adsorbent from coal for adsorption of dibenzothiophene-type compounds in diesel fuel

High-performance organic sulfur adsorbents (OSA) have been prepared from coal by chemical activation for selective adsorption of the refractory sulfur compounds, such as 4-methyl dibenzothiophene and 4,6-dimethyldibenzothiophene, in diesel fuel. The performance of the prepared OSAs for adsorptive desulfurization (ADS) was evaluated in batch and flow adsorption systems at room temperature using a model diesel fuel. It was found that coal rank and preparation conditions, including activation agents (NaOH, KOH, and NaOH + KOH) and their ratio to coal, activation temperature, and time have significant impacts on the yield and ADS performance of the OSAs. The high-performance OSAs can be prepared from different ranks of coal by using NaOH + KOH as an activation agent with an activating-agent-to-coal ratio of 3.5. The yield of OSA increased in the order of lignite < high volatile bituminous coal < medium volatile bituminous coal < anthracite. The OSA-A, which was derived from an anthracite with the highest yield (68 wt %) by the activation at 650{sup o}C for 1 h, gave the best ADS performance among the OSAs from all coal samples tested. The sulfur adsorption capacity of OSA-A reached 0.281 mmol-S/g-A at an equilibrium sulfur concentration of 50 ppmw in the model diesel fuel, which was 155% higher than a commercial coal-derived activated carbon and 35% higher than the best commercial activated carbon among all commercial activated carbons examined in our laboratory. The higher ADS capacity of OSA-A can be attributed to its significantly higher density (2.77 {mu}mol/m{sup 2}) of the adsorption sites on the surface as determined by Langmuir adsorption isotherm, which is related to its oxygen-containing functional groups on the carbonaceous surface as revealed by temperature-programmed desorption analysis. 57 refs., 10 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Selective Hydrogenolysis of Polyols and Cyclic Ethers over Bifunctional Surface Sites on Rhodium–Rhenium Catalysts

A ReO x -promoted Rh/C catalyst is shown to be selective in the hydrogenolysis of secondary C$-$O bonds for a broad range of cyclic ethers and polyols, these being important classes of compounds in biomass-derived feedstocks. Experimentally observed reactivity trends, NH 3 temperature-programmed desorption (TPD) profiles, and results from theoretical calculations based on density functional theory (DFT) are consistent with the hypothesis of a bifunctional catalyst that facilitates selective hydrogenolysis of C$-$O bonds by acid-catalyzed ring-opening and dehydration reactions coupled with metal-catalyzed hydrogenation. The presence of surface acid sites on 4 wt % Rh–ReO x /C (1:0.5) was confirmed by NH 3 TPD, and the estimated acid site density and standard enthalpy of NH 3 adsorption were 40 μmol g -1 and -100 kJ mol -1 , respectively. Results from DFT calculations suggest that hydroxyl groups on rhenium atoms associated with rhodium are acidic, due to the strong binding of oxygen atoms by rhenium, and these groups are likely responsible for proton donation leading to the formation of carbenium ion transition states. Accordingly, the observed reactivity trends are consistent with the stabilization of resulting carbenium ion structures that form upon ring-opening or dehydration. The presence of hydroxyl groups that reside α to carbon in the C$-$O bond undergoing scission can form oxocarbenium ion intermediates that significantly stabilize the resulting transition states. The mechanistic insights from this work may be extended to provide a general description of a new class of bifunctional heterogeneous catalysts, based on the combination of a highly reducible metal with an oxophilic metal, for the selective C$-$O hydrogenolysis of biomass-derived feedstocks.

Chemistry↗

Observation of an Intermediate to H 2 Binding in a Metal–Organic Framework

Coordinatively unsaturated metal sites within certain zeolites and metal–organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H 2 at the trigonal pyramidal Cu + sites in the metal–organic framework Cu I -MFU- 4 l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. Here, the activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu + coordination environment that enhances p-backbonding with H 2 . Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidation of the Roles of Water on the Reactivity of Surface Intermediates in Carboxylic Acid Ketonization on TiO 2

The effects of water on the carboxylic acid ketonization reaction over solid Lewis-acid catalysts were examined by nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), temperature-programmed desorption (TPD), and kinetic measurements. Acetic acid and propanoic acid were used as model compounds, and P25 TiO 2 was used as a model catalyst to represent the anatase TiO 2 since the rutile phase only contributes to <2.5% of the overall ketonization activity of P25 TiO 2 . The kinetic measurement showed that introducing H 2 O vapor in gaseous feed decreases the ketonization reaction rate by increasing the intrinsic activation barrier of gas-phase acetic acid on anatase TiO 2 . Quantitative TPD of acetic acid indicated that H 2 O does not compete with acetic acid for Lewis sites. Instead, as indicated by combined approaches of NMR and DRIFTS, H 2 O associates with the adsorbed acetate or acetic acid intermediates on the catalyst surface and alters their reactivities for the ketonization reaction. There are multiple species present on the anatase TiO 2 surface upon carboxylic acid adsorption, including molecular carboxylic acid, monodentate carboxylate, and chelating/bridging bidentate carboxylates. The presence of H 2 O vapor increases the coverage of the less reactive bridging bidentate carboxylate associated with adsorbed H 2 O, leading to lower ketonization activity on hydrated anatase TiO 2 . In conclusion, surface hydroxyl groups, which are consumed by interaction with carboxylic acid upon the formation of surface acetate species, do not impact the ketonization reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO 2 dielectric (70 nm), on which was placed the active layer of 2–4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol –1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBE CO of 20 ± 1 kJ mol –1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBE CO of 14 ± 1 kJ mol –1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Inorganic carbon compounds↗