SEARCH · Search NASA
Results for “van der waals materials”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Short-Range Crystalline Order-Tuned Conductivity in Cr 2 Si 2 Te 6 van der Waals Magnetic Crystals
Two-dimensional magnetic materials (2DMMs) are significant not only for studies on the nature of 2D long-range magnetic order but also for future spintronic devices. Of particular interest are 2DMMs where spins can be manipulated by electrical conduction. Whereas Cr 2 Si 2 Te 6 exhibits magnetic order in few-layer crystals, its large band gap inhibits electronic conduction. Here we show that the defect-induced short-range crystal order in Cr 2 Si 2 Te 6 , on the length scale below 0.6 nm, induces a substantially reduced band gap and robust semiconducting behavior down to 2 K that turns to metallic above 10 GPa. Our results in this work will be helpful in designing conducting states in 2DMMs and call for spin-resolved measurement of the electronic structure in exfoliated ultrathin crystals.
When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network
2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a “soft chemical” route allows for the deintercalation of K + from the layered antimonide KV 6 Sb 6 , resulting in the discovery of a new metastable 2D-Kagome antimonide K 0.1(1) V 6 Sb 6 with a van der Waals gap of 3.2 Å. The structure of K 0.1(1) V 6 Sb 6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K 0.1(1) V 6 Sb 6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V 6 Sb 6 ] layers in K 0.1(1) V 6 Sb 6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V 6 Sb 6 ] layers. The magnetic properties of the K 0.1(1) V 6 Sb 6 phase in the 2–300 K range are comparable to those of KV 6 Sb 6 and another Kagome antimonide KV 3 Sb 5 , consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K 0.1(1) V 6 Sb 6 and a low thermal conductivity of 0.6 W K –1 m –1 at 300 K. Additionally, ion exchange in KV 6 Sb 6 via a solvothermal route leads to a successful partial exchange of K + with A + (A = Na, Rb, and Cs). Here, this study highlights the tunability of the layered structure of the KV 6 Sb 6 compound, providing a rich playground for the realization of new 2D materials.
Exfoliating silica bilayers via intercalation at the silica/transition metal interface
The growth of the silica (SiO 2 ) bilayer (BL) films on transition metal (TM) surfaces creates a new class of two-dimensional (2D) crystalline, self-contained materials that interact weakly with the TM substrate. The BL-silica/TM heterojunction has shown unique physical and chemical properties that can lead to new chemical reaction mechanisms under the sub-nm confinement and broad potential applications ranging from surface protection, nano transistors, molecular sieves to nuclear waste removal. Novel applications of BL-silica can be further explored as a constituent of van der Waals assembly of 2D materials. Key to these applications is an unmet technical challenge to exfoliate and transfer BL-silica films in a large area from one substrate to another without material damage. In this study, we propose a new exfoliation mechanism based on gas molecule intercalation from density functional theory studies of the BL-silica/TM heterojunction. Here, we found that the intercalation of O atoms and CO molecules at the BL-silica/TM interface weakens the BL-silica—TM hybridization, which results in an exponential decrease of the exfoliation energy against the interface distance as the coverage of interfacial species increases. This new intercalation mechanism opens up the opportunity for non-damaging exfoliation and transfer of large area silica bilayers.
Elastic Properties and Deformation Mechanisms in the van der Waals Single-Crystalline Indium Selenide
The bulk van der Waals (vdW) single-crystalline indium selenide (β-InSe) displays exceptional plasticity in a layered crystalline form at both micro- and macroscale. However, the nanoscale origin of plasticity remains unclear. Herein, an atomic-level study on the deformation mechanisms of InSe by using first-principles calculations is reported. Remarkable anisotropic elasticity is observed in the vdW InSe layered crystal, and the stiffness is dramatically softened because of the vdW gap in the layered structure. The simulations capture the distinct fracture modes in the uniaxial tensile deformation, depending on the loading directions—brittle fracture in the [100] and [110] directions while ductile failure in the [001] direction. The InSe layered crystal structure exhibits superplastic deformability under uniaxial compression. Different transition pathways, including interlayer tangling, amorphization, and cross-linking, are tracked along respective deformation directions. The unprecedented plasticity of InSe layered crystals can be attributed to the phase transition coupled with interlayer gliding and cross-layer dislocation slipping. Here, this study deepens our understanding of the deformation mechanisms of layered materials at the atomistic level and provides insights into tailoring material properties for low-dimensional material design based on its deformation mechanisms.
Unconventional Pressure-Driven Metamagnetic Transitions in Topological van der Waals Magnets
Activating metamagnetic transitions between ordered states in van der Waals magnets and devices bring great opportunities in spintronics. Here we show that external pressure, which enhances the inter-layer hopping without introducing chemical disorders, triggers multiple metamagnetic transitions upon cooling in the topological van der Waals magnets Mn(Bi 1–x Sb x ) 4 Te 7 , where the antiferro magnetic interlayer superexchange coupling competes with the ferromagnetic interlayer coupling mediated by the antisite Mn spins. The temperature-pressure phase diagrams reveal that while the ordering temperature from the paramagnetic to ordered states is almost pressure-independent, the metamagnetic transitions show non-trivial pressure and temperature dependence, even re-entrance. For these highly anisotropic magnets, we attribute the former to the ordering temperature being only weakly dependent on the intralayer parameters, the latter to the parametrically different pressure and temperature dependence of the two interlayer couplings. Our independent probing of these disparate magnetic interactions paves an avenue for efficient magnetic manipulations in van der Waals magnets.
Nanoscale Control of Polar Surface Phases in Layered van der Waals CuInP 2 S 6
Antiferroelectric (AFE) materials, in which alternating dipole moments cancel out to a zero net macroscopic polarization, can be used for high-density energy storage and memory applications. The AFE phase can exist in bulk CuInP 2 Se 6 , CuBiP 2 S 6 , and a few other transition-metal thiophosphates below 200 K. The required low temperature poses challenges for practical applications. In this work, we report the coexistence of ferrielectric (FE) states and a stable surface phase that does not show piezoelectric response (“zero-response phase”) in bulk CuInP 2 S 6 at room temperature. Using piezoresponse force microscopy (PFM) tomographic imaging together with density functional theory, we find that direct and alternating voltages can locally and stably convert FE to zero-response phases and vice versa. While PFM loops show pinched hystereses reminiscent of antiferroelectricity, PFM tomography reveals that the zero-response areas form only on top of the FE phase in which the polarization vector is pointing up. Theoretical calculations suggest that the zero-response phase may correspond to AFE ordering where stacked CuInP 2 S 6 layers have alternating polarization orientations thereby leading to a net-zero polarization. Consistent with experimental findings, theory predicts that the FE polarization pointing down is robust up to the top surface, whereas FE polarization pointing up energetically favors the formation of an AFE surface layer, whose thickness is likely to be sensitive to local strains. AFE order is likely to be more robust against detrimental size effects than polar order, therefore providing additional opportunities to create multifunctional heterostructures with 2D electronic materials.
Space-Charge-Limited van der Waals Spin Transistor
Integrating semiconducting and magnetic materials could combine transistorlike operation with nonvolatility and enable architectures such as logic in memory. Here, in this work, we employ correlated electrical transport and scanning nitrogen-vacancy center magnetic imaging to elucidate a spin transistor concept that amalgamates vertical and lateral hopping transport inside a 2D antiferromagnetic semiconductor, mechanistically distinct from vertical tunneling devices. Our device, based on a monolayer-bilayer junction in CrSBr, displays giant, gate-tunable magnetoresistance driven by the dual action of electrostatic doping on space-charge-limited lateral conduction and interlayer exchange coupling. Moreover, we visualize a field-trainable, layer-sharing effect that selects between coherent or domain-wall reversal at the spin-flip transition, enabling multilevel, memristive conductance states. Our layer-dependent space charge mechanism for convergent electrical and magnetic control opens opportunities to address limitations in contemporary computing.
Roadmap for Photonics with 2D Materials
Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.
Interfacial Strength in Hierarchical Carbon Fiber Composites: Interplay of Interphase Modulus and Roughness
A facile, direct deposition approach that exploits van der Waals interactions between carbonaceous materials is utilized to create unidirectional hybrid carbon fiber composites. Two small molecule crosslinkers, a trifunctional aromatic (TL) and a difunctional aliphatic (DL) acyl chloride, are first utilized to create a crosslinked interphase with a softer and stiffer modulus respectively. TL crosslinked interphase with a higher modulus improved the tensile strength by 50%, despite non-covalent linking between fiber and matrix, elucidating the critical role of the interphase in alleviating modulus mismatch between the high modulus carbon fiber and the rubbery matrix. Fractional quantities of carbon nanotubes are additionally dispersed in the small molecule crosslinkers which behaved as a dispersant, helping introduce nanoasperities on the carbon fiber surface. Strong “pi-pi” interactions between CNTs and CF contributed to tensile properties, which are increased by 66% compared to the control. A cohesive zone model suggests that a stiffer interphase is better able to exploit surface heterogeneities and roughness on the fiber, synergistically enhancing interfacial strength.
Intercalation-Activated Layered MoO 3 Nanobelts as Biodegradable Nanozymes for Tumor-Specific Photo-Enhanced Catalytic Therapy
The existence of natural van der Waals gaps in layered materials allows them to be easily intercalated with varying guest species, offering an appealing strategy to optimize their physicochemical properties and application performance. Herein, we report the activation of layered MoO 3 nanobelts via aqueous intercalation as an efficient biodegradable nanozyme for tumor-specific photo-enhanced catalytic therapy. In this work, the long MoO 3 nanobelts are grinded and then intercalated with Na + and H 2 O to obtain the short Na + /H 2 O co-intercalated MoO 3–x (NH–MoO 3–x ) nanobelts. In contrast to the inert MoO 3 nanobelts, the NH–MoO 3–x nanobelts exhibit excellent enzyme-mimicking catalytic activity for generation of reactive oxygen species, which can be further enhanced by the photothermal effect under a 1064 nm laser irradiation. Thus, after bovine serum albumin modification, the NH–MoO 3–x nanobelts can efficiently kill cancer cells in vitro and eliminate tumors in vivo facilitating with 1064 nm laser irradiation.
Discovery of van Hove singularities: electronic fingerprints of 3Q magnetic order in a van der Waals quantum magnet
Magnetically intercalated transition metal dichalcogenides are emerging as a rich platform for exploring exotic quantum states in van der Waals magnets. Among them, Co x TaS 2 has attracted intense interest following the recent discovery of a distinctive 3Q magnetic ground state and a pronounced topological Hall effect below a critical doping of x ≈ 1/3, both intimately tied to cobalt concentration. To date, direct signatures of this enigmatic 3Q magnetic order in the electronic structure remain elusive. Here we report a comprehensive doping dependent angle resolved photoemission spectroscopy study that unveils these long-sought fingerprints. Our data reveal an unexpected inverse-Mexican-hat dispersion along the K-M-K' direction, accompanied by two van Hove singularities. These features are consistent with theoretical predictions for a 3Q magnetic order near three-quarters band filling on a cobalt triangular lattice. These results provide evidence of 3Q magnetic order in the electronic structure, establishing TMD van der Waals magnets as tunable materials to explore the interplay between magnetism and topology.
Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications
The room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. Low temperature growth supersedes the requirement of elevated growth temperatures accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of the functional properties and the consequent deterioration of the device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process, which exhibited various functional properties for potential applications. Comprehensive chemical, spectroscopic and microscopic characterizations confirmed the growth of ordered nanosheet-like hexagonal BN (h-BN). Functionally, the nanosheets show hydrophobicity, high lubricity (low coefficient of friction), and a low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. In conclusion, our work unveils an important step that brings a plethora of potential applications for these room temperature grown h-BN nanosheets as the synthesis can be feasible on any given substrate, thus creating a scenario for “h-BN on demand” under a frugal thermal budget.
Mechanical properties of freestanding few-layer graphene/boron nitride/polymer heterostacks investigated with local and non-local techniques
van der Waals two-dimensional materials and heterostructures combined with polymer films continue to attract research attention to elucidate their functionality and potential applications. This study presents the fabrication and mechanical testing of 2D material heterostacks, consisting of few-layer boron nitride and graphene heterostructures synthesized via chemical vapor deposition, capped with a polymethyl methacrylate layer and suspended across ∼200 μm wide trenches using a combined wet–dry transfer method. The mechanical characterization of the heterostacks was performed using two independent approaches: (a) non-local testing with a custom-built tensile testing platform and (b) local load–displacement testing employing atomic force microscopy probes, complemented by finite element simulations. Both approaches provided new results, which are in good agreement with each other. Overall, our findings offer new insights into a combined load capacity in complex multi-material two-dimensional systems, and can contribute to advancing micro and nano-scale device designs and implementations.
Ferroelectrics and photovoltaics in endohedral fullerenes-based van der Waals heterostructures
Using the density functional theory calculations, we studied the ferroelectric, electronic, and optical properties of a series of bias-controllable endohedral fullerene molecules (TM@C28, TM = Ti-Ni). One important finding is that Cr@C28 has a large electric dipole moment and an appropriate bandgap (∼1.2 eV). By sandwiching Cr@C28 molecules between two graphene or transition metal dichalcogenide layers, the heterostructures may combine strong ferroelectricity and excellent optical properties. This paves the way for the development of two-dimensional van der Waals ferroelectric-photovoltaic materials.
Charge transfer dynamics and interlayer exciton formation in MoS 2 /VOPc mixed dimensional heterojunction
Mixed-dimensional van der Waals heterojunctions involve interfacing materials with different dimensionalities, such as a 2D transition metal dichalcogenide and a 0D organic semiconductor. These heterojunctions have shown unique interfacial properties not found in either individual component. Here, we use femtosecond transient absorption to reveal photoinduced charge transfer and interlayer exciton formation in a mixed-dimensional type-II heterojunction between monolayer MoS 2 and vanadyl phthalocyanine (VOPc). Selective excitation of the MoS 2 exciton leads to hole transfer from the MoS 2 valence band to VOPc highest occupied molecular orbit in ~710 fs. On the contrary, selective photoexcitation of the VOPc layer leads to instantaneous electron transfer from its excited state to the conduction band of MoS 2 in less than 100 fs. Further, this light-initiated ultrafast separation of electrons and holes across the heterojunction interface leads to the formation of an interlayer exciton. These interlayer excitons formed across the interface lead to longer-lived charge-separated states of up to 2.5 ns, longer than in each individual layer of this heterojunction. Thus, the longer charge-separated state along with ultrafast charge transfer times provide promising results for photovoltaic and optoelectronic device applications.
Polarization dependent photoemission as a probe of the magnetic ground state in the van der Waals ferromagnet VI 3
Van der Waals ferromagnets are thrilling materials from both a fundamental and technological point of view. VI 3 is an interesting example, with a complex magnetism that differentiates it from the first reported Cr based layered ferromagnets. In this work, we show in an indirect way through angle resolved photoemission spectroscopy experiments, the importance of spin–orbit coupling setting the electronic properties of this material. Our light polarized photoemission measurements point to a ground state with a half-filled $\mathcal{e}_{±}^{'}$ doublet, where a gap opening is triggered by spin–orbit coupling enhanced by electronic correlations.
Characteristic exciton energy scales in antiferromagnetic NiPS 3
Two-dimensional antiferromagnets are promising materials for spintronics. The van der Waals antiferromagnet NiPS 3 has attracted extensive interest due to its ultranarrow exciton feature which is closely linked with the magnetic ordering. Here, we use time-resolved terahertz spectroscopy to investigate photoexcited carriers in NiPS 3 . We identify the onset of interband transitions and estimate the exciton dissociation energy from the excitation wavelength and fluence dependence of the transient spectral weight. Furthermore, our results provide key insights to quantify the exciton characteristics and validate the band structure for NiPS 3 .