Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Effect of tabs on the flow and noise field of an axisymmetric jet

The effect of vortex generators, in the form of small tabs projecting normally into the flow at the nozzle exit, on the characteristics of an axisymmetric jet is investigated experimentally over the jet Mach number range of 0.3-1.81. The tabs eliminate screech noise from supersonic jets and alter the shock structure drastically. They distort the jet cross section and increase the jet spread rate significantly. The distortion produced is essentially the same at subsonic and underexpanded supersonic conditions. Thus, the underlying mechanism must be independent of compressibility effects. A tab with a height as small as 2 percent of the jet diameter, but larger than the efflux boundary-layer thickness, is found to produce a significant effect. Flow visualization reveals that each tab introduces an 'indentation' into the high speed side of the shear layer via the action of streamwise vortices. These vortices are inferred to be of the 'trailing vortex' type rather than of the 'necklace vortex' type. It is apparent that a substantial pressure differential must exist between the upstream and the downstream sides of the tab to effectively produce these trailing vortices. This explains why the tabs are ineffective in the overexpanded flow, as in that case an adverse pressure gradient exists near the nozzle exit which reduces the pressure differential produced by the tab.

Samimy, M.↗

Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes

The effects of the twisted tapes consisting of centre wings and alternate-axes (WT-A) on thermohydraulic properties in a round tube, were investigated. The effects of other three types of twisted tapes including: (1) the twisted tape with wings alone (WT), (2) the twisted tape with alternate axes alone (T-A), and (3) the typical twisted tape (TT), were also studied for comparison. All twisted tapes used were twisted at constant twist length (y) of 57 mm, corresponding to a constant twist ratio (y/W) of 3.0. The wings were generated along the centre line of the tape with three different angles of attack, ({beta} = 43 , 53 and 74 ). Test runs were conducted using water as a testing fluid with Reynolds number range between 5200 and 22,000. Under the similar condition, the heat transfer rate in the tube fitted with the WT-A was consistently higher than those in the tube equipped the WT, T-A and plain tube. It is also found that the heat transfer rate increased with increasing angle of attack. Over the range studied, the use of WT-A at {beta} = 74 was found to be the most effective for heat transfer enhancement, giving thermal performance factor of up to 1.4. Mean values of Nusselt number (Nu), friction factor (f), thermal performance factor ({eta}) provided by the WT-A (at {beta} = 74 ) were respectively, 17.7%, 30.6% and 7.8% higher than those in the tube with WT (at {beta} = 74 ), 20.8%, 53% and 4.9% higher than those in the tube with T-A, and 62%, 123% and 24% higher than those in the tube with TT. The superior performance of the WT-A over those of the other tapes could be attributed to the combined effects of the following actions: (1) a common swirling flow by the twisted tape (2) a vortex generated by the wing (3) a strong collision of the recombined streams behind each alternate point. For a better understanding on flow phenomena, flow-visualization by smoke wire technique is also presented. In addition, the experimental correlations of Nusselt number, friction factor and thermal performance factor were also developed. (author)

42 ENGINEERING↗

Numerical Modeling of Flow Control in a Boundary-Layer-Ingesting Offset Inlet Diffuser at Transonic Mach Numbers

This paper will investigate the validation of a NASA developed, Reynolds-averaged Navier-Stokes (RANS) flow solver, OVERFLOW, for a boundary-layer-ingesting (BLI) offset (S-shaped) inlet in transonic flow with passive and active flow control devices as well as the baseline case. Numerical simulations are compared to wind tunnel results of a BLI inlet conducted at the NASA Langley 0.3-Meter Transonic Cryogenic Tunnel. Comparisons of inlet flow distortion, pressure recovery, and inlet wall pressures are performed. The numerical simulations are compared to the BLI inlet data at a freestream Mach number of 0.85 and a Reynolds number of approximately 2 million based on the length of the fan-face diameter. The numerical simulations with and without wind tunnel walls are performed, quantifying effects of the tunnel walls on the BLI inlet flow measurements. The wind tunnel test evaluated several different combinations of jet locations and mass flow rates as well as a vortex generator (VG) vane case. The numerical simulations will be performed on a single jet configuration for varying actuator mass flow rates at a fix inlet mass flow condition. Validation of the numerical simulations for the VG vane case will also be performed for varying inlet mass flow rates. Overall, the numerical simulations were able to predict the baseline circumferential flow distortion, DPCPavg, very well for comparisons made within the designed operating range of the BLI inlet. However the CFD simulations did predict a total pressure recovery that was 0.01 lower than the experiment. Numerical simulations of the baseline inlet flow also showed good agreement with the experimental inlet centerline surface pressures. The vane case showed that the CFD predicted the correct trends in the circumferential distortion for varying inlet mass flow but had a distortion level that was nearly twice as large as the experiment. Comparison to circumferential distortion measurements for a 15 deg clocked 40 probe rake indicated that the circumferential distortion levels are very sensitive to the symmetry of the flow and that a miss alignment of the vanes in the experiment could have resulted in this difference. The numerical simulations of the BLI inlet with jets showed good agreement with the circumferential inlet distortion levels for a range of jet actuator mass flow ratios at a fixed inlet mass flow rate. The CFD simulations for the jet case also predicted an average total pressure recovery that was 0.01 lower than the experiment as was seen in the baseline. Comparison of the flow features the jet case revealed that the CFD predicted a much larger vortex at the engine fan-face when compare to the experiment.

Allan Brian G.↗

Two-dimensional viscous flow simulation of a shock accelerated heavy gas cylinder

Numerical simulation of Richtmyer–Meshkov instability (RMI) is conducted using an improved localized artificial diffusivity (LAD) approach, which is used to treat discontinuities in the form of material interfaces and shocks in the flow-field. The RMI occurs on a cylindrical interface between air and SF 6 accelerated by a Mach 1.2 shock initially in air. Navier–Stokes simulation is conducted to accurately predict the mixing between the two fluids. The beginning conditions for the two-dimensional simulations are matched to previous experimental work by C. Tomkins et al. [“An experimental investigation of mixing mechanisms in shock-accelerated flow,” J. Fluid Mech. 611, 131 (2008)] and good agreement is found between the experimental data and numerical results. The study on initial condition sensitivity indicates that the initial pressure and density gradient are critical parameters that determine the primary vortex generation responsible for the flow development. A grid convergence study is carried out and the relative contribution of the artificial properties introduced by the LAD method is characterized. Novel to this study is the exploration of the effect of the third species (acetone used as a tracer particle in the experiments to obtain contour fields using planar laser induced florescence). The effect of the presence of the third species on the evolution of the RMI and mixing is shown to be non-negligible and an estimate of the amount of the tracer species that was present in the initial experimental set-up is given.

42 ENGINEERING↗

Optical fiber antenna generating spiral beam shapes

A simple method is proposed here to generate vortex beam and spiral intensity patterns from a Gaussian source. It uses a special type of optical fiber antenna of aperture ∼80 nm having naturally grown surface curvature along its length. The antenna converts linearly polarized Gaussian beam into a beam with spiral intensity patterns. The experimentally obtained spiral patterns with single and double spiral arms manifest the orbital angular momentum, l = ±1, 2, carried by the output beam. Such beam can be very useful for optical tweezer, metal machining, and similar applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dust trapping by vortices in transitional disks: evidence for non-ideal magnetohydrodynamic effects in protoplanetary disks

We study particle trapping at the edge of a gap opened by a planet in a protoplanetary disk. In particular, we explore the effects of turbulence driven by the magnetorotational instability on particle trapping, using global three-dimensional magnetohydrodynamic (MHD) simulations including Lagrangian dust particles. We study disks either in the ideal MHD limit or dominated by ambipolar diffusion (AD) which plays an essential role at the outer regions of a protoplanetary disk. With ideal MHD, strong turbulence (the equivalent viscosity parameter α ∼ 10{sup –2}) in disks prevents vortex formation at the edge of the gap opened by a 9 M{sub J} planet, and most particles (except the particles that drift fastest) pile up at the outer gap edge almost axisymmetrically. When AD is considered, turbulence is significantly suppressed (α ≲ 10{sup –3}), and a large vortex forms at the edge of the planet induced gap, which survives ∼1000 orbits. The vortex can efficiently trap dust particles that span 3 orders of magnitude in size within 100 planetary orbits. We have also carried out two-dimensional hydrodynamical (HD) simulations using viscosity as an approximation to MHD turbulence. These HD simulations can reproduce vortex generation at the gap edge as seen in MHD simulations. Finally, we use our simulation results to generate synthetic images for ALMA dust continuum observations on Oph IRS 48 and HD 142527, which show good agreement with existing observations. Predictions for future ALMA cycle 2 observations have been made. We conclude that the asymmetry in ALMA observations can be explained by dust trapping vortices and the existence of vortices could be the evidence that the outer protoplanetary disks are dominated by AD with α < 10{sup –3} at the disk midplane.

79 ASTRONOMY AND ASTROPHYSICS↗

Gyrokinetic simulations of the effects of magnetic islands on microturbulence in KSTAR

Gyrokinetic simulations are utilized to study effects of magnetic islands (MIs) on the ion temperature gradient (ITG) turbulence in the KSTAR tokamak with resonant magnetic perturbations. Simulations show that the transport is controlled by the nonlinear interactions between the ITG turbulence and self-generated vortex flows and zonal flows, leading to an anisotropic structure of fluctuation and transport on the poloidal plane and in the toroidal direction. MIs greatly enhance turbulent transport of both particle and heat. The turbulent transport exhibits variations in the toroidal direction, with transport through the resonant layer near the island X-point being enhanced when the X-point is located at the outer mid-plane. A quantitative agreement is shown between simulations and KSTAR experiments in terms of time frequency and perpendicular wavevector spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of air chemistry and stiffened EOS of air in numerical simulations of bubble collapse in water

In this paper we study the effects of a stiffened gas equation of state for air at high pressure and air chemistry with dissociation in numerical simulations of bubble collapse in water. Two types of bubble collapse are studied, with one corresponding to spherically symmetric collapse simulating single-bubble sonoluminescence (SBSL), and the other a GPa-shock-induced axisymmetric bubble collapse. The numerical method is a finite-volume based solver with diffuse material interface model. Verification and validation of the solver are demonstrated by comparing to analytical solutions and experimental observations. We find that for sonoluminescence, air chemistry and equation of state for air at high pressures can have significant effects on the peak temperature and pressure attained during the evolution, and that the peak temperature is on the order of 1 eV, which is close to that observed in experiments. For shock-induced bubble collapse, the pressure inside the bubble will not be as high as that in sonoluminescence due to the absence of spherical symmetry. However, the air chemistry still has a significant effect on the temperature of the bubble. We also examine the effect of multiple bubble interaction in shock-induced bubble collapse and find several mechanisms that can significantly increase the pressure in the water. These mechanisms include frontal-distal-side-collision, shock focusing, upstream-traveling shocks, and compression of the water near the centerline by the vortex generated by bubble collapse. These have important implications for cavitation erosion.

42 ENGINEERING↗

Final Report: Use of Graphite Foam as a Thermal Performance Enhancement of Heavy Hybrid Propulsion Systems

Oak Ridge National Laboratory's graphite foam has the potential to be used as a heat exchanger for the Army's Future Combat System Manned Ground Vehicle and thus has the potential to improve its thermal performance. The computational fluid dynamics (CFD) program FLOW3D was used to develop a new CFD model for the graphite foam to be used in the development of a proper heat exchanger. The program was calibrated by first measuring the properties of the solid foams and determining the parameters to be used in the CFD model. Then the model was used to predict within 5% error the performance of finned foam heat sinks. In addition, the f factors and j factors commonly used to predict pressure drop and heat transfer were calculated for both the solid and finned structures. There was some evidence that corrugating the foams would yield higher j/f ratios than state of the art heat exchangers, confirming previously measured data. Because the results show that the CFD model was validated, it is recommended that the funding for Phases 2 through 5 be approved for the design of both the finned heat exchanger using tubes and round fin structures and the solid foam design using corrugated foams. It was found that the new CFD model using FLOW3D can predict both solid foam heat transfer and finned foam heat transfer with the validated model parameters. In addition, it was found that the finned foam structures exhibited j/f ratios that indicate that significant heat transfer is occurring within the fin structures due to aerodynamically induced flow, which is not present in solid aluminum fin structures. It is possible that the foam surfaces can act as turbulators that increase heat transfer without affecting pressure drop, like the vortex generators seen in state of the art heat exchangers. These numbers indicate that the foam can be engineered into an excellent heat exchanger. It was also found that corrugating the solid foams would increase the j/f ratio dramatically, allowing the solid foams to compete directly with standard heat exchangers. Although corrugated L1 foam samples have not been produced (attempts are under way), it is possible that their j/f ratio can be even higher than those of the finned structures.

33 ADVANCED PROPULSION SYSTEMS↗

Magnetic-Field Effects in Unstable High-Energy-Density Plasmas

The influence of magnetic fields in high-energy-density (HED) systems is a widely unexplored field of research that can play an important role in magnetized inertial confinement fusion (ICF) and in astrophysical systems. Hydrodynamic instabilities are presently believed to be the dominant degradation mechanism in ICF implosions. Therefore, understanding the influence of an imposed B-field on RT growth is important for future mitigation strategies as well as fundamental physics of ICF implosions that utilize B-fields for enhanced performance. The Crab Nebula, one of the most observed objects in our universe, contains elongated spikes of material created by hydrodynamic instabilities, however these spikes do not break-up and become turbulent as they evolve late in time. One hypothesis for this behavior is that B-fields around these spikes prevent vortex generation typical in these types of systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Trailing vortex hazard.

Light aircraft hazards due to trailing vortex generated by heavy transport aircraft, suggesting specific procedures for takeoff, landing and flight phase

Mcgowan, W. A.↗

Systems and Controls Laboratory

Jet spreading in fluid amplifiers, thermal switching of jet flows, and nozzle thrust modulation by vortex generation

Source record↗

Performance of a bicone inlet designed for Mach 2.5 with internal distributed compression and 40 percent internal contraction

The inlet was designed to have the minimum internal contraction consistent with high total-pressure recovery and low cowl drag. Without a bypass system, the peak pressure recoveries increased from 0.890 to 0.936 when the supercritical bleed mass flow ratio was varied from 0.035 to 0.060. With an operating bypass system and installed centerbody vortex generators, a slight increase in peak pressure recovery was obtained. The values of steady-state distortion and dynamic distortion were below 0.10 and 0.02, respectively, near critical operation. Simulation of a turbofan engine with concentric pipes showed no effect on compressor face flow profiles with varying bypass flow ratio.

Wasserbauer, J. F.↗