Search NASA⌕ Search

SEARCH · Search NASA

Results for “weights”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Strain-Gauge Measurement of Weight of Fluid in a Tank

A method of determining the amount of fluid in a tank is based on measurement of strains induced in tank supports by the weight of the fluid. Unlike most prior methods, this method is nonintrusive: there is no need to insert instrumentation in the tank and, hence, no need to run wires, cables, or tubes through the tank wall. Also unlike most prior methods, this method is applicable even if the fluid in the tank is at supercritical pressure and temperature, because it does not depend on the presence of a liquid/gas interface (as in liquid-level-measuring methods). The strain gauges used in this method may be of two types: foil and fiber-optic. Four foil gauges (full bridge) are mounted on each of the tank-supporting legs. As the tank is filled or emptied, the deformation in each leg increases or decreases, respectively. Measured deformations of all legs are added to obtain a composite deformation indicative of the change in weight of the tank plus fluid. An initial calibration is performed by recording data at two points (usually, empty and full) for which the mass or weight of fluid is known. It is assumed that the deformations are elastic, so that the line passing through the two points can be used as a calibration curve of mass (or weight) of fluid versus deformation. One or more fiber-optic gauges may be used instead of the foil gauges. The resolution of the fiber-optic and foil gauges is approximately the same, but the fiber-optic gauges are immune to EMI (electromagnetic interference), are linear with respect to temperature over their entire dynamic range (as defined by the behavior of the sample), and measure thermally induced deformations as predictable signals. Conversely, long term testing has demonstrated that the foil gauges exhibit an erratic behavior whenever subjected to direct sun radiation (even if protected with a rubberized cover). Henceforth, for deployment in outdoor conditions, fiber-optic gauges are the only option if one is to rely on the system for an extended period of time when a recalibration procedure may not be acceptable. A set of foil gauges had been tested on the supports of a 500-gallon (1,900-liter) tank. The gauges were found to be capable of measuring the deformations (up to 22 micro-strain) that occurred during filling and emptying of the tank. The fluid masses calculated from the gauge readings were found to be accurate within 4.5 percent. However, the reliability of the foil gauges over a few hours was not acceptable. Therefore, the foil sensor system is acceptable for use only in controlled environments (complete shade, or indoors).

Figueroa, Jorge↗

Finite Element Based HWB Centerbody Structural Optimization and Weight Prediction

This paper describes a scalable structural model suitable for Hybrid Wing Body (HWB) centerbody analysis and optimization. The geometry of the centerbody and primary wing structure is based on a Vehicle Sketch Pad (VSP) surface model of the aircraft and a FLOPS compatible parameterization of the centerbody. Structural analysis, optimization, and weight calculation are based on a Nastran finite element model of the primary HWB structural components, featuring centerbody, mid section, and outboard wing. Different centerbody designs like single bay or multi-bay options are analyzed and weight calculations are compared to current FLOPS results. For proper structural sizing and weight estimation, internal pressure and maneuver flight loads are applied. Results are presented for aerodynamic loads, deformations, and centerbody weight.

Gern, Frank H.↗

Effects of Vehicle Weight and True Versus Indicated Airspeed on BVI Noise During Steady Descending Flight

Blade-vortex interaction noise measurements are analyzed for an AS350B helicopter operated at 7000 ft elevation above sea level. Blade-vortex interaction (BVI) noise from four, 6 degree descent conditions are investigated with descents flown at 80 knot true and indicated airspeed, as well as 4400 and 3915 pound take-off weights. BVI noise is extracted from the acquired acoustic signals by way of a previously developed time-frequency analysis technique. The BVI extraction technique is shown to provide a better localization of BVI noise, compared to the standard Fourier transform integration method. Using this technique, it was discovered that large changes in BVI noise amplitude occurred due to changes in vehicle gross weight. Changes in BVI noise amplitude were too large to be due solely to changes in the vortex strength caused by varying vehicle weight. Instead, it is suggested that vehicle weight modifies the tip-path-plane angle of attack, as well as induced inflow, resulting in large variations of BVI noise. It was also shown that defining flight conditions by true airspeed, rather than indicated airspeed, provides more consistent BVI noise signals.

Stephenson, James H.↗

The Flight Optimization System Weights Estimation Method

FLOPS has been the primary aircraft synthesis software used by the Aeronautics Systems Analysis Branch at NASA Langley Research Center. It was created for rapid conceptual aircraft design and advanced technology impact assessments. FLOPS is a single computer program that includes weights estimation, aerodynamics estimation, engine cycle analysis, propulsion data scaling and interpolation, detailed mission performance analysis, takeoff and landing performance analysis, noise footprint estimation, and cost analysis. It is well known as a baseline and common denominator for aircraft design studies. FLOPS is capable of calibrating a model to known aircraft data, making it useful for new aircraft and modifications to existing aircraft. The weight estimation method in FLOPS is known to be of high fidelity for conventional tube with wing aircraft and a substantial amount of effort went into its development. This report serves as a comprehensive documentation of the FLOPS weight estimation method. The development process is presented with the weight estimation process.

Wells, Douglas P.↗

Mapping variations in weight percent silica measured from multispectral thermal infrared imagery - Examples from the Hiller Mountains, Nevada, USA and Tres Virgenes-La Reforma, Baja California Sur, Mexico

Remotely sensed multispectral thermal infrared (8-13 mu m) images are increasingly being used to map variations in surface silicate mineralogy. These studies utilize the shift to longer wavelengths in the main spectral feature in minerals in this wavelength region (reststrahlen band) as the mineralogy changes from felsic to mafic. An approach is described for determining the amount of this shift and then using the shift with a reference curve, derived from laboratory data, to remotely determine the weight percent SiO2 of the surface. The approach has broad applicability to many study areas and can also be fine-tuned to give greater accuracy in a particular study area if field samples are available. The approach was assessed using airborne multispectral thermal infrared images from the Hiller Mountains, Nevada, USA and the Tres Virgenes-La Reforma, Baja California Sur, Mexico. Results indicate the general approach slightly overestimates the weight percent SiO2 of low silica rocks (e.g. basalt) and underestimates the weight percent SiO2 of high silica rocks (e.g. granite). Fine tuning the general approach with measurements from field samples provided good results for both areas with errors in the recovered weight percent SiO2 of a few percent. The map units identified by these techniques and traditional mapping at the Hiller Mountains demonstrate the continuity of the crystalline rocks from the Hiller Mountains southward to the White Hills supporting the idea that these ranges represent an essentially continuous footwall block

Stock, Joann M.↗

Enabling a Weight Efficient Power System for an Electrified Turbofan Through Gearbox Design and Control

Electrified Aircraft Propulsion (EAP) concepts could enable various benefits through a variety of use-cases. Benefits are sought in the form of reduced fuel burn and emissions. Many of these concepts involve the electrification of gas turbine engines. Electrification is accomplished through the integration of electric machines (EMs) with the engine shafts, providing the ability to inject and/or extract power as desired. Energy storage is also a common feature. An often-overlooked feature of the analysis is the means of integrating the EMs with the engine shafts. A trivial solution is to allow each shaft to have its own dedicated EM through independent geartrains. However, non-trivial mechanical integration solutions could provide benefits when considered in coordination with control logic to manage the operation of the propulsion system. Here, such a solution is considered and is shown to have the potential to reduce weight for a relevant conceptual electrified propulsion system. Weight saving benefits are demonstrated for various EAP use-cases. In particular, the mild hybrid application was shown to benefit from a power system weight reduction of 47% and an overall system weight reduction of 29%.

Hybrid Electric Propulsion↗

Enabling a Weight Efficient Power System for an Electrified Turbofan Through Gearbox Design and Control

Electrified Aircraft Propulsion (EAP) concepts could enable various benefits through a variety of use-cases. Benefits are sought in the form of reduced fuel burn and emissions. Many of these concepts involve the electrification of gas turbine engines. Electrification is accomplished through the integration of electric machines (EMs) with the engine shafts, providing the ability to inject and/or extract power as desired. Energy storage is also a common feature. An often-overlooked feature of the analysis is the means of integrating the EMs with the engine shafts. A trivial solution is to allow each shaft to have its own dedicated EM through independent geartrains. However, non-trivial mechanical integration solutions could provide benefits when considered in coordination with control logic to manage the operation of the propulsion system. Here, such a solution is considered and is shown to have the potential to reduce weight for a relevant conceptual electrified propulsion system. Weight saving benefits are demonstrated for various EAP use-cases. In particular, the mild hybrid application was shown to benefit from a power system weight reduction of 47% and an overall system weight reduction of 29%.

Hybrid Electric Propulsion↗

Forecast of Standard Atomic Weights for the Mononuclidic Elements – 2011

In this short report, I will provide an early warning about potential changes to the standard atomic weight values for the twenty mononuclidic and the so-called pseudo-mononuclidic ({sup 232}Th and {sup 231}Pa) chemical elements due to the estimated changes in the mass values to be published in the next Atomic Mass Tables within the next two years. There have been many new measurements of atomic masses, since the last published Atomic Mass Table. The Atomic Mass Data Center has released an unpublished version of the present status of the atomic mass values as a private communication. We can not update the Standard Atomic Weight Table at this time based on these unpublished values but we can anticipate how many changes are probably going to be expected in the next few years on the basis of the forthcoming publication of the Atomic Mass Table. I will briefly discuss the procedures that the Atomic Weights Commission used in deriving the recommended Standard Atomic Weight values and their uncertainties from the atomic mass values. I will also discuss some concern raised about a proposed change in the definition of the mole. The definition of the mole is now connected directly to the mass of a {sup 12}C isotope (which is defined as 12 exactly) and to the kilogram. A change in the definition of the mole will probably impact the mass of {sup 12}C.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bessel-weighted asymmetries and the Sivers effect

We consider the cross section in Fourier space, conjugate to the outgoing hadron's transverse momentum, where convolutions of transverse momentum dependent parton distribution functions and fragmentation functions become simple products. Individual asymmetric terms in the cross section can be projected out by means of a generalized set of weights involving Bessel functions. Advantages of employing these Bessel weights are that they suppress (divergent) contributions from high transverse momentum and that soft factors cancel in (Bessel-) weighted asymmetries. Also, the resulting compact expressions immediately connect to previous work on evolution equations for transverse momentum dependent parton distribution and fragmentation functions and to quantities accessible in lattice QCD. Bessel-weighted asymmetries are thus model independent observables that augment the description and our understanding of correlations of spin and momentum in nucleon structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Technique for information retrieval using enhanced latent semantic analysis generating rank approximation matrix by factorizing the weighted morpheme-by-document matrix

A technique for information retrieval includes parsing a corpus to identify a number of wordform instances within each document of the corpus. A weighted morpheme-by-document matrix is generated based at least in part on the number of wordform instances within each document of the corpus and based at least in part on a weighting function. The weighted morpheme-by-document matrix separately enumerates instances of stems and affixes. Additionally or alternatively, a term-by-term alignment matrix may be generated based at least in part on the number of wordform instances within each document of the corpus. At least one lower rank approximation matrix is generated by factorizing the weighted morpheme-by-document matrix and/or the term-by-term alignment matrix.

97 MATHEMATICS AND COMPUTING↗

Bessel Weighted Asymmetries

We review the concept of Bessel weighted asymmetries for semi-inclusive deep inelastic scattering and focus on the cross section in Fourier space, conjugate to the outgoing hadron’s transverse momentum, where convolutions of transverse momentum dependent parton distribution functions and fragmentation functions become simple products. Individual asymmetric terms in the cross section can be projected out by means of a generalized set of weights involving Bessel functions. The procedure is applied to studies of the double longitudinal spin asymmetry in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator which includes quark intrinsic transverse momentum within the generalized parton model. We observe a few percent systematic offset of the Bessel-weighted asymmetry obtained from Monte Carlo extraction compared to input model calculations, which is due to the limitations imposed by the energy and momentum conservation at the given energy and hard scale Q2. We find that the Bessel weighting technique provides a powerful and reliable tool to study the Fourier transform of TMDs with controlled systematics due to experimental acceptances and resolutions with different TMD model inputs.

Avakian, Harut↗

Low molecular weight salts combined with fluorinated solvents for electrolytes

Provided are electrochemical cells and electrolytes used to build such cells. An electrolyte includes at least one salt having a molecular weight less than about 250. Such salts allow forming electrolytes with higher salt concentrations and ensure high conductivity and ion transport in these electrolytes. The low molecular weight salt may have a concentration of at least about 0.5M and may be combined with one or more other salts, such as linear and cyclic imide salts and/or methide salts. The concentration of these additional salts may be less than that of the low molecular weight salt, in some embodiments, twice less. The additional salts may have a molecular weight greater than about 250. The electrolyte may also include one or more fluorinated solvents and may be capable of maintaining single phase solutions at between about -30.degree. C. to about 80.degree. C.

30 DIRECT ENERGY CONVERSION↗

α-weighted Transition Rate Matrix Method

Relative effectiveness of an α-weighted Transition Rate Matrix Method (TRMM) as compared to the normally used κ- weighted, for solving reactor transient problem is investigated. An improved Monte Carlo κ-α iteration with delayed neutron is implemented to the OpenMC to generate the fundamental α-eigenfunction to be used as the weighting function in calculating the TRMM forward and adjoint operators. A prompt supercritical transient problem and a deep subcritical transient problem of a two-region slab system are devised to compare the relative performance of the α- and κ-weighted TRMM.

Variansyah, Ilham↗

Processor and method of weighted feature importance estimation

A method includes determining a feature importance ranking for each pair of clusters of a plurality of clusters to generate a first plurality of feature importance rankings. The method further includes determining a feature importance ranking between a particular data element and each cluster to generate a second plurality of feature importance rankings. A distance value associated with each pair of clusters of the plurality of clusters is determined to generate a plurality of distance values, and a probability value associated with each data element is determined to generate a plurality of probability values. The method further includes weighting the first plurality of feature importance rankings based on the plurality of distance values to determine a first plurality of weighted feature importance rankings and weighting the second plurality of feature importance rankings based on the plurality of probability values to determine a second plurality of weighted feature importance rankings.

97 MATHEMATICS AND COMPUTING↗

How Much Weight Can Be Expected to be Handled with a Telemanipulator for a Worker; Limits and Possibilities of the Systems - 18638

Mechanical tele-manipulators reproduce the effects of the hand and arm movements of the worker by means of mechanical transmission elements, installed in a shielding or a containment wall. It shall be constructed in such a manner that the motions, forces and torques, executed by the hand of the worker on the handle of the cold arm, are transmitted respectively to the hot arm and the tongs. The tele-manipulator shall ensure force reflection from the hot arm to the cold arm. The cold arm and hot arm are arranged to have identical kinematics. Additional components are provided on the cold arm, in particular, counter-weights balancing the arms of the tele-manipulators and, where necessary, lockable brakes and/or the control elements for motorized relative motions or off-sets between the hot arm and the cold arm (i.e. indexing). Mechanical tele-manipulators shall be equipped with an electrical indexing of the Y-motion (forward-backward) and X-motion (right-left). For some tele-manipulators with telescopic arm it may also include an electrical extension of the Z-motion (up and down), consisting of a double telescopic arm. The latter is called extended reach. The indexing and extended reach allow the range of action of the hot arm to be increased, while keeping the cold arm in a good ergonomic position.[1] Consequently and in other words the workers are feeling exactly 1:1 the weight of the object handled on the hot arm. Additionally to the forces applied on the mechanical components, it also should be considered the physically effort of the worker to handle objects. How much weight can a worker handle on a short time period and how much weight during whole shift? To answer this question, a description of the mechanical tele-manipulators and the available feature should be made to get a general idea of what is already done to make the work of the workers easier. Interviews of workers will bring their point of view on the situation today. At the end it will be described what kind of solutions are already available to make the work easier and increase the work capacity. (authors)

42 ENGINEERING↗

Synergistic ablation does not affect atrophy or altered myosin heavy chain expression in the non-weight bearing soleus muscle

The purpose of this study was to investigate whether the soleus muscle undergoes atrophy and alterations in myosin heavy chain (MHC) composition during non-weight bearing in the absence of synergists. Thirty-two female rats were randomly assigned to four groups: control (C), synergistic ablation (ABL) of the gastrocnemius and plantaris muscles to overload the soleus muscle, hindlimb suspension (HLS), or a combination of synergistic ablation and hindlimb suspension (HLS-ABL). After 28 days of hindlimb suspension, soleus atrophy was more pronounced in HLS (58%) than in HLS-ABL (43%) rats. Compared to C rats, non-weight bearing decreased mixed and myofibrillar protein contents and Type I MHC 49%, 45%, and 7%, respectively, in HLS animals. In addition, de novo expression of fast Type IIx and Type IIb MHC (5% and 2%, respectively) was observed in HLS animals. Similarly, when compared to C rats, mixed and myofibrillar protein contents and Type I MHC decreased 43%, 46%, and 4%, respectively, in HLS-ABL animals. Also, de novo expression of Type IIx (4%) and IIb (1%) MHC was observed. Collectively, these data indicate that the loss of muscle protein and Type I MHC, and the de novo expression of Type IIx and Type IIb MHC in the rat soleus occur independently of the presence of synergists during non-weight bearing. Furthermore, these results confirm the contention that soleus mass and MHC expression are highly sensitive to alterations in mechanical load.

NASA Center ARC↗

Molecular weight dependent structure and charge transport in MAPLE-deposited poly(3-hexylthiophene) thin films

In this work, poly(3-hexylthiophene) (P3HT) films prepared using the matrix-assisted pulsed laser evaporation (MAPLE) technique are shown to possess morphological structures that are dependent on molecular weight (MW). Specifically, the structures of low MW samples of MAPLE-deposited film are composed of crystallites/aggregates embedded within highly disordered environments, whereas those of high MW samples are composed of aggregated domains connected by long polymer chains. Additionally, the crystallite size along the side-chain (100) direction decreases, whereas the conjugation length increases with increasing molecular weight. This is qualitatively similar to the structure of spin-cast films, though the MAPLE-deposited films are more disordered. In-plane carrier mobilities in the MAPLE-deposited samples increase with MW, consistent with the notion that longer chains bridge adjacent aggregated domains thereby facilitating more effective charge transport. The carrier mobilities in the MAPLE-deposited simples are consistently lower than those in the solvent-cast samples for all molecular weights, consistent with the shorter conjugation length in samples prepared by this deposition technique.

36 MATERIALS SCIENCE↗

Analysis of the weighted shifted boundary method for the Poisson and Stokes problems

The Shifted Boundary Method (SBM) belongs to the class of unfitted (or immersed, or embedded) finite element methods, and relies on reformulating the original boundary value problem over a surrogate (approximate) computational domain. Accuracy is maintained by properly shifting the location and values of the boundary conditions. This avoids integration over cut cells and the associated implementation issues. Recently, the Weighted SBM (WSBM) was proposed for the Navier-Stokes equations with free surfaces and the Stokes flow with moving boundaries. The attribute “weighted” in the name WSBM stems from the fact that its variational form is weighted with the elemental volume fraction of active fluid. The motivation for the development of the WSBM was the preservation of the volume of active fluid to a higher degree of accuracy, which in turn resulted in improved stability and robustness characteristics in moving-boundary, time-dependent simulations. In this article, we present the numerical analysis of the WSBM formulations for the Poisson and Stokes problems. We give mathematical conditions under which the bilinear forms defining the discrete variational formulations are uniformly coercive (Poisson problem) or inf-sup stable (Stokes problem). By these results, stability and optimal convergence is proven in the natural norm; L2-error estimates can also be derived.

Approximate domain boundaries↗