Search NASA⌕ Search

SEARCH · Search NASA

Results for “wrapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Research highlights: June 1990 - May 1991

Linear instability calculations at MSFC have suggested that the Geophysical Fluid Flow Cell (GFFC) should exhibit classic baroclinic instability at accessible parameter settings. Interest was in the mechanisms of transition to temporal chaos and the evolution of spatio-temporal chaos. In order to understand more about such transitions, high resolution numerical experiments for the physically simplest model of two layer baroclinic instability were conducted. This model has the advantage that the numerical code is exponentially convergent and can be efficiently run for very long times, enabling the study of chaotic attractors without the often devastating effects of low-order trunction found in many previous studies. Numerical algorithms for implementing an empirical orthogonal function (EOF) analysis of the high resolution numerical results were completed. Under conditions of rapid rotation and relatively low differential heating, convection in a spherical shell takes place as columnar banana cells wrapped around the annular gap, but with axes oriented along the axis of rotation; these were clearly evident in the GFFC experiments. The results of recent numerical simulations of columnar convection and future research plans are presented.

Source record↗
NASA NTRS1990

Plasma sheet polytropic index as inferred from the FPE measurements

It is shown here that a four-cell convection pattern imposed on the magnetosphere by the solar wind during northward IMF conditions can be distorted into a wrapped two-cell convection pattern which is similar to the empirical distorted two-cell convection patterns deduced by Heppner and Maynard (1987). The convection distortions are caused by the anisotropic reflections of Alfven waves due to the anisotropic and nonuniform ionospheric conductance. The distributions of the resulting field-aligned currents in the model are characteristically consistent with observed current distributions, including the NBZ currents during northward IMF.

Zhu, X. M.↗
NASA NTRS1991

Reusable cryogenic foam insulation for advanced aerospace vehicles

Future high-speed aircraft and aerospace vehicles using cryogenic propellants will require an advanced reusable insulation system for the propellant tank structure. This cryogenic insulation system must be lightweight, structurally and thermally efficient, and capable of multiple reuse without cracking or degraded performance. This paper presents recent progress in the development of a reusable cryogenic foam insulation system having a maximum service temperature of 400 F. The system consists of preshaped, precut blocks of rigid polymethacrylimide foam insulation, wrapped with a high-temperature Kapton and aluminum foil vapor barrier which is adhesively bonded to the propellant tank wall.

Mcauliffe, Patrick S.↗
NASA NTRS1991

Ionospheric convection response to changing IMF direction

By combining ground-based and satellite-based measurements of ionospheric electric fields, conductivities and magnetic perturbations, it was possible to examine the characteristics of instantaneous, ionospheric convection patterns associated with changing directions of the interplanetary magnetic field (IMF). In response to a rapid southward-to-northward turning of the IMF on July 23, 1983, the ionospheric convection reconfigured over a period of 40 minutes. The configuration changed from a conventional two-cell pattern to a contracted four-cell pattern, with reversed convection cells in the high-latitude dayside, associated with a strong potential drop of about 75 kV. Later, in response to a gradual rotation of the IMF from the +Z through the -Y toward the -Z direction, the nightside cells disappeared and the dawn cell in the reversed pair wrapped around and displaced the dusk cell until a conventional two-cell pattern was reestablished, largely in accord with the qualitative model of Crooker (1988). The results suggest that multiple cells can arise as a result of strong southward to northward transitions in the IMF. They appear to persist for sometime thereafter.

Knipp, D. J.↗
NASA NTRS1991

Plume and wake dynamics, mixing, and chemistry behind an HSCT aircraft

The chemical evolution and mixing and vortical motion of a High Speed Civil Transport's engine exhausts must be analyzed in order to track the gas and its speciation as emissions are mixed to atmospheric scales. Attention is presently given to an analytic model of the wake dynamical processes which accounts for the roll-up of the trailing vorticity, its breakup due to the Crow instability, and the subsequent evolution and motion of the reconnected vorticity. The concentrated vorticity is noted to wrap up the buoyant exhaust and suppress its continued mixing and dilution. The species tracked encompass those which could be heterogeneously reactive on the surfaces of the condensed ice particles, and those capable of reacting with exhaust soot particle surfaces to form active contrail and/or cloud condensation nuclei.

Miake-Lye, R. C.↗
NASA NTRS1992

Shape-Memory Wires Switch Rotary Actuator

Thermomechanical rotary actuator based on shape-memory property of alloy composed of equal parts of titanium and nickel. If alloy stretched while below transition temperature, it reverts to original length when heated above transition temperature. Two capstans on same shaft wrapped with shape-memory wires. As one wire heated, it contracts and stretches opposite wire. Wires heated in alternation so they switch shaft between two extreme angular positions; "on" and "off" positions of rotary valve.

Brudnicki, Myron J.↗
NASA NTRS1992

High-Resolution Rotary-To-Linear Motion Converter

Compact rotary-to-linear motion converter combines high load-carrying ability with finely resolvable movement. Simple and inexpensive to manufacture. Helical coil of metal ribbon wrapped around spool. Bearing supports spool on fixed base. Restraining bar prevents collar from rotating, but allows it to rise and fall. 1,000-turn coil of ribbon 0.010 in. thick provides for translation of collar over distance of 10 inches. Coil made from flattened roll-formed wire. Material inexpensive, strong, and resistant to fatigue.

Millam, M. Bruce↗
NASA NTRS1992

High temperature, flexible, fiber-preform seal

A seal is mounted in a rectangular groove in a movable structural panel. The seal comprises a fiber preform constructed of multiple layers of fiber having a uniaxial core. Helical fibers are wound over the core. The fibers are of materials capable of withstanding high temperatures and are both left-hand and right-hand wound. An outer layer wrapped over said helical fibers prevents abrasion damage.

Steinetz, Bruce M.↗
NASA NTRS1990

Braided composite bore evacuator chambers for tank cannons

Typically, continuous filament composite components are fabricated using a filament winding technique. In this operation, fibers are introduced to a rotating mandrel while a guide holding the material traverses back and forth to place the material in a helical pattern over the surface of the mandrel. This procedure is continued until complete coverage is obtained. An alternative method for fabricating continuous filament composite components is braiding. In the braiding operation a mandrel is traversed through the center of the braider while 144 strands of material traverse around a carrier ring. As the fibers are applied to a mandrel surface, 72 carriers holding the fibers travel clockwise, while another 72 carriers travel counterclockwise to interlock fibers. An additional 72 carriers located on the back of the braider introduce longitudinal fibers to the composite giving the composite lateral strength. The goal of using the braider is to reduce production time by simultaneously applying 144 strands of material onto a mandrel as opposed to the four-strand wrapping most filament winding techniques offer. Benefits to braiding include the ability to (1) introduce longitudinal fibers to the composite structure; (2) fabricate non-symmetric components without using complex functions to produce full coverage; and (3) produce a component with a higher degree of damage tolerance due to the interlocking of fibers. The fabrication of bore evacuator chambers for a tank cannon system is investigated by utilizing a 144 carrier braiding machine, an industrial robot, and a resin applicator system.

Wheeler, Philip C.↗
NASA NTRS1991

Time-dependent aerodynamic analysis of ducted and unducted propfans at angle of attack

A three-dimensional unsteady aerodynamic analysis is described for predicting the time-dependent flow about ducted and unducted propfans operating at angle of attack. Although the freestream is assumed to be uniform, the flow relative to the rotating blades varies with circumferential position, resulting in an inherent unsteadiness due to the nonaxial inflow. The time-dependent Euler equations are solved utilizing a Runge-Kutta time-stepping scheme. The analysis is based on a finite-volume discretization employing a multiple-block grid network. To permit the use of large calculation time steps, an implicit residual smoothing scheme previously tested for unsteady flow calculations in two dimensions is extended to three spatial dimensions. For unducted propfans, a single H-type grid block is used for each blade passage to determine the time-periodic flowfield. For ducted propfans (ultra-high bypass fans) a body-centered C-type grid is wrapped about the cowl to improve the accuracy of the analysis in the high gradient flow region near the cowl leading edge. Numerical results are compared with available data for both ducted and unducted propfans operating at angle of attack.

Hall, Edward J.↗
NASA NTRS1990

The magnetic topology of the plasmoid flux rope in a MHD-simulation of magnetotail reconnection

On the basis of a 3D MHD simulation, the magnetic topology of a plasmoid that forms by a localized reconnection process in a magnetotail configuration (including a net dawn-dusk magnetic field component B sub y N is discussed. As a consequence of B sub y N not equalling 0, the plasmoid assumes a helical flux rope structure rather than an isolated island or bubble structure. Initially all field lines of the plasmoid flux rope remain connected with the earth, while at later times a gradually increasing amount of flux tubes becomes separated, connecting to either the distant boundary or to the flank boundaries. In this stage, topologically different flux tubes become tangled and wrapped around each other, consistent with predictions on the basis of an ad hoc plasmoid model.

Birn, J.↗
NASA NTRS1992

Dynamics of ultraharmonic resonances in spiral galaxies

The mildly nonlinear response of a fluid disk with pressure, viscosity, and self-gravity to spiral stellar forcing is considered as a model of the interstellar medium in spiral galaxies. Nonlinear effects are analyzed through a quasi-linear flow analysis ordered by successive powers of a dimensionless spiral perturbing force, which is the ratio of imposed nonaxisymmetric gravitational to axisymmetric gravitational forces. Waves with mn arms are launched from a position where the wavenumber of a free wave matches n times the wavenumber of the spiral forcing. The launched short wave in the gas is an interarm feature that is more tightly wrapped than the stellar wave. The gas wave extracts energy and angular momentum from the stellar wave, causing it to damp. The application of the results to the stellar disk alone reveals even stronger damping, as stars undergo Landau damping of the short wave. For parameters in M81, damping times are less than 10 exp 9 yr.

Artymowicz, Pawel↗
NASA NTRS1992

Pervasive large-scale magnetic fields in the Venus nightside ionosphere and their implications

When the solar wind dynamic pressure at Venus was extraordinarily high during the primary mission of the Pioneer Venus Orbiter (PVO), 'disappearing ionospheres' occurred on the nightside, with accompanying pervasive near-periapsis magnetic fields of tens of nanoteslas. These nightside counterparts of the generally horizontal large-scale magnetic fields in the dayside ionosphere are found to exhibit some dependence of field magnitude on the solar wind pressure but not on solar zenith angle. Their statistical behavior suggests a global configuration in which the low-altitude field wraps around the planet, while the field at higher altitudes is draped like the induced magnetotail field. The toroidal low-altitude field geometry implies the possible existence of magnetic x points in the low-altitude wake.

Luhmann, J. G.↗
NASA NTRS1992

Stability test and analysis of the Space Shuttle Primary Reaction Control Subsystem thruster

The results are reported of a test program conducted on the Space Shuttle Primary Reaction Control Subsystem thruster in order to investigate the effects of trapped helium bubbles and saturated propellants on stability, determine if thruster-to-thruster stability variations are significant, and determine stability under STS-representative conditions. It is concluded that the thruster design is highly reliable in flight and that burn-through has not occurred. Significantly unstable thrusters are screened out, and wire wrap is found to protect against chamber burn-throughs and to provide a fail-safe thruster for this situation.

Applewhite, John↗
NASA NTRS1993

Eddy-Current Monitoring Of Composite Layups

Eddy-current-probe apparatus used to determine predominant orientations of fibers in fiber/matrix composite materials. Apparatus nondestructive, noninvasive means for monitoring composite prepregs and layups during fabrication to ensure predictable and repeatable mechanical properties of finished composite panels. Consists essentially of electromagnet coil wrapped around horseshoe-shaped powdered-iron or ferrite ore. Optionally, capacitor included in series or parallel with coil to form resonant circuit. Impedance monitor excites radio-frequency current in coil and measures impedance of probe circuit. Affected by whatever material placed near ends of core, where material intercepts alternating magnetic field excited in core by current in coil.

Fox, Robert L.↗
NASA NTRS1993

Restraint Age Forming Of Machined Panels

Panels bent permanently without cracking. In restraint age forming, panel wrapped onto mandrel having necessary curved contour, restrained on mandrel clamps and vacuum, and heat treated. When panel released after end of heat treatment, retains contour of mandrel except for small springback. Process repeatable: panels subsequently processed under same mechanical and thermal conditions on same contour emerge with same final contour.

Wood, Rebecca↗
NASA NTRS1992

Tethered Satellite System Contingency Investigation Board

The Tethered Satellite System (TSS-1) was launched aboard the Space Shuttle Atlantis (STS-46) on July 31, 1992. During the attempted on-orbit operations, the Tethered Satellite System failed to deploy successfully beyond 256 meters. The satellite was retrieved successfully and was returned on August 6, 1992. The National Aeronautics and Space Administration (NASA) Associate Administrator for Space Flight formed the Tethered Satellite System (TSS-1) Contingency Investigation Board on August 12, 1992. The TSS-1 Contingency Investigation Board was asked to review the anomalies which occurred, to determine the probable cause, and to recommend corrective measures to prevent recurrence. The board was supported by the TSS Systems Working group as identified in MSFC-TSS-11-90, 'Tethered Satellite System (TSS) Contingency Plan'. The board identified five anomalies for investigation: initial failure to retract the U2 umbilical; initial failure to flyaway; unplanned tether deployment stop at 179 meters; unplanned tether deployment stop at 256 meters; and failure to move tether in either direction at 224 meters. Initial observations of the returned flight hardware revealed evidence of mechanical interference by a bolt with the level wind mechanism travel as well as a helical shaped wrap of tether which indicated that the tether had been unwound from the reel beyond the travel by the level wind mechanism. Examination of the detailed mission events from flight data and mission logs related to the initial failure to flyaway and the failure to move in either direction at 224 meters, together with known preflight concerns regarding slack tether, focused the assessment of these anomalies on the upper tether control mechanism. After the second meeting, the board requested the working group to complete and validate a detailed integrated mission sequence to focus the fault tree analysis on a stuck U2 umbilical, level wind mechanical interference, and slack tether in upper tether control mechanism and to prepare a detailed plan for hardware inspection, test, and analysis including any appropriate hardware disassembly.

Source record↗
NASA NTRS1992

Regolith thermal energy storage for lunar nighttime power

A scheme for providing nighttime electric power to a lunar base is described. This scheme stores thermal energy in a pile of regolith. Any such scheme must somehow improve on the poor thermal conductivity of lunar regolith in vacuum. Two previous schemes accomplish this by casting or melting the regolith. The scheme described here wraps the regolith in a gas-tight bag and introduces a light gas to enhance thermal conductivity. This allows the system to be assembled with less energy and equipment than schemes which require melting of regolith. A point design based on the new scheme is presented. Its mass from Earth compares favorably with the mass of a regenerative fuel cell of equal capacity.

Tillotson, Brian↗