SEARCH · Search NASA

Results for “zonal flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Vaporization and Zonal Mixing in Performance Modeling of Advanced LOX-Methane Rockets

Initial modeling of LOX-Methane reaction control (RCE) 100 lbf thrusters and larger, 5500 lbf thrusters with the TDK/VIPER code has shown good agreement with sea-level and altitude test data. However, the vaporization and zonal mixing upstream of the compressible flow stage of the models leveraged empirical trends to match the sea-level data. This was necessary in part because the codes are designed primarily to handle the compressible part of the flow (i.e. contraction through expansion) and in part because there was limited data on the thrusters themselves on which to base a rigorous model. A more rigorous model has been developed which includes detailed vaporization trends based on element type and geometry, radial variations in mixture ratio within each of the "zones" associated with elements and not just between zones of different element types, and, to the extent possible, updated kinetic rates. The Spray Combustion Analysis Program (SCAP) was leveraged to support assumptions in the vaporization trends. Data of both thrusters is revisited and the model maintains a good predictive capability while addressing some of the major limitations of the previous version.

Williams, George J., Jr.↗

NASA NTRS1989

Accurate simulation of vortical flows

Even with recent supercomputers having a large memory, Navier-Stokes simulations for vortical flows do not provide satisfactory results because of the lack of grid resolution to accurately simulate the strength of separation vortices. To overcome this problem, a zonal method is proposed to increase the number of grid points locally. Interface scheme which is critical for an efficient and stable zonal method is based on the Fortified Navier-Stokes concept. Application to both two-dimensional conical and three-dimensional delta wing problems indicates this simple zonal method can improve the accuracy of vortical flow simulations.

Fujii, Kozo↗

NASA NTRS1992

Conservative Grid-Interface Algorithm For Computing Flows

Best features of structured- and unstructured-grid methods combined. Gaps and overlaps between zonal grids eliminated by grid-interface algorithm, which generates single interfacial grid and corrects fluxes of flow quantities accordingly. Incorporated into two three-dimensional Navier-Stokes finite-volume codes and tested in computations of incompressible and compressible flows about simple bodies. Good numerical results obtained. General enough to be incorporated into other finite-volume codes without restrictions on complexities of shapes of bodies and zonal interfaces.

Klopfer, G. H.↗

NASA NTRS1989

A knowledge-based approach to automated flow-field zoning for computational fluid dynamics

An automated three-dimensional zonal grid generation capability for computational fluid dynamics is shown through the development of a demonstration computer program capable of automatically zoning the flow field of representative two-dimensional (2-D) aerodynamic configurations. The applicability of a knowledge-based programming approach to the domain of flow-field zoning is examined. Several aspects of flow-field zoning make the application of knowledge-based techniques challenging: the need for perceptual information, the role of individual bias in the design and evaluation of zonings, and the fact that the zoning process is modeled as a constructive, design-type task (for which there are relatively few examples of successful knowledge-based systems in any domain). Engineering solutions to the problems arising from these aspects are developed, and a demonstration system is implemented which can design, generate, and output flow-field zonings for representative 2-D aerodynamic configurations.

Vogel, Alison Andrews↗

NASA NTRS1988

Knowledge-based zonal grid generation for computational fluid dynamics

Automation of flow field zoning in two dimensions is an important step towards reducing the difficulty of three-dimensional grid generation in computational fluid dynamics. Using a knowledge-based approach makes sense, but problems arise which are caused by aspects of zoning involving perception, lack of expert consensus, and design processes. These obstacles are overcome by means of a simple shape and configuration language, a tunable zoning archetype, and a method of assembling plans from selected, predefined subplans. A demonstration system for knowledge-based two-dimensional flow field zoning has been successfully implemented and tested on representative aerodynamic configurations. The results show that this approach can produce flow field zonings that are acceptable to experts with differing evaluation criteria.

Andrews, Alison E.↗

NASA NTRS1996

Turbulent Compressible Convection with Rotation: Flow Structure and Evolution - Part 1

The effects of Coriolis forces on compressible convection are studied using three-dimensional numerical simulations carried out within a local modified f-plane model. The physics is simplified by considering a perfect gas occupying a rectilinear domain placed tangentially to a rotating sphere at various latitudes, through which a destabilizing heat flux is driven. The resulting convection is considered for a range of Rayleigh, Taylor, and Prandtl (and thus Rossby) numbers, evaluating conditions where the influence of rotation is both weak and strong. Given the computational demands of these high-resolution simulations, the parameter space is explored sparsely to ascertain the differences between laminar and turbulent rotating convection. The first paper in this series examines the effects of rotation on the flow structure within the convection, its evolution, and some consequences for mixing. Subsequent papers consider the large-scale mean shear flows that are generated by the convection, and the effects of rotation on the convective energetics and transport properties. It is found here that the structure of rotating turbulent convection is similar to earlier nonrotating studies, with a laminar, cellular surface network disguising a fully turbulent interior punctuated by vertically coherent structures. However, the temporal signature of the surface flows is modified by inertial motions to yield new cellular evolution patterns and an overall increase in the mobility of the network. The turbulent convection contains vortex tubes of many scales, including large-scale coherent structures spanning the full vertical extent of the domain involving multiple density scale heights. Remarkably, such structures align with the rotation vector via the influence of Coriolis forces on turbulent motions, in contrast with the zonal tilting of streamlines found in laminar flows. Such novel turbulent mechanisms alter the correlations which drive mean shearing flows and affect the convective transport properties. In contrast to this large-scale anisotropy, small-scale vortex tubes at greater depths are randomly orientated by the rotational mixing of momentum, leading to an increased degree of isotropy on the medium to small scales of motion there. Rotation also influences the thermodynamic mixing properties of the convection. In particular, interaction of the larger coherent vortices causes a loss of correlation between the vertical velocity and the temperature leaving a mean stratification which is not isentropic.

Brummell, Nicholas H.↗

NASA NTRS1989

A parallel finite-difference method for computational aerodynamics

A finite-difference scheme for solving complex three-dimensional aerodynamic flow on parallel-processing supercomputers is presented. The method consists of a basic flow solver with multigrid convergence acceleration, embedded grid refinements, and a zonal equation scheme. Multitasking and vectorization have been incorporated into the algorithm. Results obtained include multiprocessed flow simulations from the Cray X-MP and Cray-2. Speedups as high as 3.3 for the two-dimensional case and 3.5 for segments of the three-dimensional case have been achieved on the Cray-2. The entire solver attained a factor of 2.7 improvement over its unitasked version on the Cray-2. The performance of the parallel algorithm on each machine is analyzed.

Swisshelm, Julie M.↗

NASA NTRS1982

A zonal approach to solution of the Euler equations

A technique for the solution of the one- and two-dimensional Euler equations in a partitioned flow field is presented. The field is divided into distinct 'zones', each of which is computed separately. An implicit boundary procedure based on the characteristic propagaion of information and flux splitting methods is applied at the zonal interfaces. Numerical results are presented for both quasi-one-dimensional nozzle flows with shock waves and the unsteady shock-tube problem. These calculations demonstrate the capability of shock propagation through arbitrarily located zonal boundaries in a stable, conservative, and accurate manner. Two-dimensional results include the zonal computation of flows over blunt bodies and airfoils.

Hessenius, K. A.↗

NASA NTRS2012

A New Look at Titan's Zonal Winds from Cassini Radio Occultations

We use the existing thirteen Cassini radio'occultation soundings to construct a meridional cross section of geopotential height vs. pressure and latitude. The assumption of balanced flow permits the construction of a similar cross section of zonal winds, from near the surface to the 0.1'mbar level. In the lower troposphere, the winds are approx.10 m/s, except within 20deg of the equator, where they are much smaller. The winds increase higher up in the troposphere to nearly 40 m/s in the tropopause region, but then decay rapidly in the lower stratosphere to near'zero values at 20 mbar (approx.80 km), reminiscent of the Huygens Doppler Wind Experiment result. This null zone extends over most latitudes, except for limited bands at mid'latitudes. Higher up in the stratosphere, the winds become larger. They are highest in the northern (winter) hemisphere. We compare the occultation results with the DWE and CIRS retrievals and discuss the similarities and differences among the data sets.

Flasar, F. M.↗

NASA NTRS1983

A study of stratospheric vacillations and sudden warmings on a beta-plane. I - Single wave-mean flow interaction

A beta-plane model of the stratosphere is used to investigate the planetary-wave amplitude vacillations first reported by Holton and Mass (1976). This model differs from theirs in allowing more horizontal modes. For low surface wave amplitudes, a new class of solutions is found which exhibits a stationary, partially reflecting critical line at steady state. The critical line equilibrates at lower altitudes as the wave forcing is increased. Vacillating solutions occur when the steady state critical line occurs near the lower boundary. The maximum wave amplitude and the maximum steady-state wave amplitude found in the model are in the ratio of 2:1, in good agreement with theoretical predictions. The maximum wave amplitude never exceeds 2200 gpm which is quite close to the saturation limit predicted by Schoeberl (1982). An analysis of the statistics of slowly and rapidly vacillating flows shows that both the wave and zonal mean variances are important in determining the time mean, zonal mean dynamics of the upper stratosphere.

Schoeberl, M. R.↗

NASA NTRS1985

A simulation of rotor-stator interaction using the Euler equations and patched grids

An unsteady Euler code to study rotor-stator interaction problem was developed. The code uses patched grids that move relative to each other to simulate the motion of the rotor airfoils with respect to the stator airfoils. The Osher integration scheme is used in conjunction with an implicit relaxation approach. The scheme is second order accurate in space and time, and is also TVD in each spatial direction. The numerical results were found to be periodic in time, thus demonstrating the capability of the integration and zonal schemes in simulating periodic time dependent flow. The pressure contours obtained are almost oscillation free because of the TVD nature of the scheme. A new procedure was developed to simulate flows about bodies that move relative to each other. This capability should prove to be very useful in the areas of rotor-stator interaction, propeller-nacelle interaction, and helicopter rotor-fuselage interaction.

Rai, M. M.↗

NASA NTRS1992

A composite structured/unstructured-mesh Euler method for complex airfoil shapes

A general two-dimensional Euler zonal method has been developed for computing flows about complex airfoil geometries such as multielement and iced airfoils. The method utilizes a composite structured and unstructured grid generated using conformal mapping and Delaunay triangulation, respectively. The finite-volume Euler method is then modified to couple solutions in the zones with structured and unstructured grids. Solutions about an iced airfoil and a multielement airfoil are given as examples of applications of the scheme.

Hefazi, H.↗

NASA NTRS1990

Angle-of-attack validation of a new zonal CFD method for airfoil simulations

The angle-of-attack validation of a new concept suggested by Summa (1990) for coupling potential and viscous flow methods has been investigated for two-dimensional airfoil simulations. The fully coupled potential/Navier-Stokes code, ZAP2D (Zonal Aerodynamics Program 2D), has been used to compute the flow field around an NACA 0012 airfoil for a range of angles of attack up to stall at a Mach number of 0.3 and a Reynolds number of 3 million. ZAP2D calculation for various domain sizes from 25 to 0.12 chord lengths are compared with the ARC2D large domain solution as well as with experimental data.

Yoo, Sungyul↗

NASA NTRS1985

Computational aspects of zonal algorithms for solving the compressible Navier-Stokes equations in three dimensions

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The flow field immediately adjacent to the wing surface is resolved with fine grid zones and solved using a Navier-Stokes algorithm. Flow field regions removed from the wing are resolved with less finely clustered grid zones and are solved with an Euler algorithm. Computational issues associated with this zonal approach, including data base management aspects, are discussed. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects. Additional cases with significant shock induced separation on the upper wing surface are also presented.

Holst, T. L.↗

NASA NTRS1985

MPD thruster performance - Propellant distribution and species effects

Previous research has shown that MPD thruster performance, as measured by thrust, specific impulse, and efficiency, is limited by a so-called 'onset' current level. Experimental results are presented which show that the onset current level varies with the radial position of mass injection. Specifically, mass injection into either of two zones results in drastically different performance for both argon and xenon propellants. This difference in performance is evidenced by the onset current levels, the onset V-J signatures, and the overall V-J characteristics. The behavior of the thruster with the total mass flow split between the two zones follows a transition between the zonal behavioral limits. The behavior of propellant mixtures also follows a transition between the behavior of the individual propellant species. The flow region between the two zones is characterized by a particle number density discontinuity, a large axial current density, and a large electron Hall parameter, suggesting a possible correlation between observed onset phenomena and a shear-flow discontinuity located in the region between the two zones.

Kelly, A. J.↗

NASA NTRS1993

A solution-adaptive hybrid-grid method for the unsteady analysis of turbomachinery

A solution-adaptive method for the time-accurate analysis of two-dimensional flows in turbomachinery is described. The method employs a hybrid structured-unstructured zonal grid topology in conjunction with appropriate modeling equations and solution techniques in each zone. The viscous flow region in the immediate vicinity of the airfoils is resolved on structured O-type grids while the rest of the domain is discretized using an unstructured mesh of triangular cells. Implicit, third-order accurate, upwind solutions of the Navier-Stokes equations are obtained in the inner regions. In the outer regions, the Euler equations are solved using an explicit upwind scheme that incorporates a second-order reconstruction procedure. An efficient and robust grid adaptation strategy, including both grid refinement and coarsening capabilities, is developed for the unstructured grid regions. Grid adaptation is also employed to facilitate information transfer at the interfaces between unstructured grids in relative motion. Results for grid adaptation to various features pertinent to turbomachinery flows are presented. Good comparisons between the present results and experimental measurements and earlier structured-grid results are obtained.

Mathur, Sanjay R.↗

NASA NTRS1989

Navier-Stokes solutions for flows related to store separation

The objective is developing CFD capabilities to obtain solutions for viscous flows about generic configurations of internally and externally carried stores. The emphasis is placed on the supersonic flow regime with extensions being made to the transonic regime. The project is broken into four steps: (1) Cavity flows for internal carriage configurations; (2) High angle of attack flows, which may be experienced during the separation of the stores: (3) Flows about a body near a flat plate for external carriage configurations; and (4) Flows about a body inside or in the proximity of a cavity. Three-dimensional unsteady cavity flow solutions are obtained by an explicit, MacCormack algorithm, EMCAV3, for open, close, and transitional cavities. High angle of attack flows past cylinders are solved by an implicit, upwind algorithm. All the results compare favorably with the experimental data. For flows about multiple body configurations, the Chimera embedding scheme is modified for finite-volume and multigrid algorithms, MaGGiE. Then a finite volume, implicit, upwind, multigrid Navier-Stokes solver which uses on overlapped/embedded and zonal grids, VUMXZ3, is developed from the CFL3D code. Supersonic flows past a cylinder near a flat plate are computed using this code. The results are compared with the experimental data. Currently the VUMXZ3 code is being modified to accomplish step 4 of this project. Wind tunnel experiments are also being conducted for validation purposes.

Baysal, Oktay↗

NASA NTRS1980

The role of forced planetary waves in the annual cycle of the zonal mean circulation of the middle atmosphere

A severely truncated semispectral numerical model is used to simulate the annual cycle of the zonally averaged circulation in the middle atmosphere (16-96 km). The model includes only a single zonal harmonic wave component which interacts with the mean flow; the circulation is driven by diabatic heating and by a specified perturbation in the topography of the lower boundary, which is taken to be the 100 mb surface. A comparison of the annual cycle simulated by this model with the results of an analogous two-dimensional model indicates that planetary waves have relatively little influence on the zonal mean temperature profiles and on the solstice mean zonal winds at high latitudes. The primary effects of the forced waves are in decelerating the mean winds at low latitudes in the winter hemisphere to produce a region of weak westerlies, and in generating final warmings at the spring equinoxes.

Holton, J. R.↗