Search NASA⌕ Search

SEARCH · Search NASA

Results for “100%”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Growth and characterization of epitaxial SrF2 on InP(100)

The epitaxial growth of 100-262.5-nm SrF2 films on n-type and p-type (100)InP in a conventional baked UHV system at base pressure about 200 ptorr, temperature 250-350 C, and growth rate from less than 100 to about 200 pm/s. Substrates are chemicomechanically polished, degreased, bombarded with 500-eV Ar ions for 3-4 min at 350 C, and annealed for 23-30 min at 350 C, producing a slightly In-rich (In/P = 1.02) In-island-free surface with a (4 x 1) or (1 x 1) LEED structure. Films grown at 350 C and less than 100 pm/s are found to be smooth and free of cracks in most cases, with a highly faceted (1 x 1) LEED structure. The electrical properties of the SrF2 films are found to be acceptable only when the ohmic contacts are applied prior to the substrate prior to SrF2 growth.

Sinharoy, S.↗

The effect of Sr and Bi on the Si(100) surface oxidation - Auger electron spectroscopy, low energy electron diffraction, and X-ray photoelectron spectroscopy study

The effect of Sr and Bi on the oxidation of the Si(100) surface has been studied by Auger electron spectroscopy, low electron diffraction, and X-ray photoelectron spectroscopy. A dramatic enhancement, by a factor of 10, of the Si oxidation has been observed for Si(100) with a Sr overlayer. The SR-enhanced Si oxidation has been studied as a function of O2 exposure and Sr coverage. In contrast to the oxidation promotion of Sr on Si, it has been also observed that a Bi overlayer on Si(100) reduced Si oxidation significantly. Sr adsorption on the Si(100) with a Bi overlayer enhances Si oxidation only at Sr coverage of greater than 0.3 ML.

Fan, W. C.↗

Frequency variations of the earth's obliquity and the 100-kyr ice-age cycles

Changes in the earth's climate are induced by variations in the earth's orbital parameters which modulate the seasonal distribution of solar radiation. Periodicities in the geological climate record with cycles of 100, 41, and 23 kyr have been linked with changes in obliquity, eccentricity, and precession of the equinoxes. The effect of variations of eccentricity during a 100 kyr period is weak relative to the signals from obliquity and precession variations and it may therefore be expected that the 100 kyr signal in the climate record would be of low intensity. However, this signal dominates the climate record and internal nonlinear processes within the climate system have previously been proposed to account for this fact. The author shows that variations in the frequency of the obliquity cycle can give rise to strong 100-kyr forcing of climate.

Liu, Han-Shou↗

Star Formation in Hi Tails: HCG 92, HCG 100 and 6 Interacting Systems

We present new Gemini spectra of 14 new objects found within the HI tails of Hickson Compact Groups 92 and 100. Nine of them are GALEX Far-UV (FUV) and Near-UV (NUV) sources. The spectra confirm that these objects are members of the compact groups and have metallicities close to solar, with an average value of 12+log(O/H)approx.8.5. They have average FUV luminosities 7 x 10(exp 40) erg/s, very young ages (< 100 Myr) and two of them resemble tidal dwarf galaxies (TDGs) candidates. We suggest that they were created within gas clouds that were ejected during galaxy-galaxy interactions into the intergalactic medium, which would explain the high metallicities of the objects, inherited from the parent galaxies from which the gas originated. We conduct a search for similar objects in 6 interacting systems with extended HI tails, NGC 2623, NGC 3079, NGC 3359, NGC 3627, NGC 3718, NGC 4656. We found 35 UV sources with ages < 100 Myr, however most of them are on average less luminous/massive than the UV sources found around HCG 92 and 100. We speculate that this might be an environmental effect and that compact groups of galaxies are more favorable to TDG formation than other interacting systems.

deMello, D. F.↗

X-Ray Diffraction (XRD) Characterization Methods for Sigma=3 Twin Defects in Cubic Semiconductor (100) Wafers

An X-ray defraction (XRD) characterization method for sigma=3 twin defects in cubic semiconductor (100) wafers includes a concentration measurement method and a wafer mapping method for any cubic tetrahedral semiconductor wafers including GaAs (100) wafers and Si (100) wafers. The methods use the cubic semiconductor's (004) pole figure in order to detect sigma=3/{111} twin defects. The XRD methods are applicable to any (100) wafers of tetrahedral cubic semiconductors in the diamond structure (Si, Ge, C) and cubic zinc-blend structure (InP, InGaAs, CdTe, ZnSe, and so on) with various growth methods such as Liquid Encapsulated Czochralski (LEC) growth, Molecular Beam Epitaxy (MBE), Organometallic Vapor Phase Epitaxy (OMVPE), Czochralski growth and Metal Organic Chemical Vapor Deposition (MOCVD) growth.

Park, Yeonjoon↗

100 kW Nested Hall Thruster System Development

Large scale cargo transportation to support human missions to the Moon and Mars will require very high power Solar Electric Propulsion (SEP) systems operating between 200 and 400 kW. Aerojet Rocketdyne's NextSTEP program is developing and demonstrating a 100 kW EP system, the XR-100, using a Nested Hall Thruster (NHT) designed for powers up to 200 kW, a modular power processor and a modular flow controller. The three year program objective is to operate the integrated EP system continuously at 100 kW for 100 h, advancing this very high power Electric Propulsion (EP) system to Technology Readiness Level (TRL) 5. With our University of Michigan, Jet Propulsion Laboratory and NASA Glenn Research Center teammates, Aerojet Rocketdyne has completed the initial phase of the program, including operating the thruster at up to 30 kW to validate the thermal models and developing and operating multiple power processor modules in the required seriesparallel configuration. The current phase includes completing a TRL 4 integrated system test at reduced power to validate all system operating phases. Design upgrades to demonstrate the TRL 5 capabilities are underway. This paper will present the high power XR-100 capabilities, overall program and design approach and the latest test results for the 100 kW EP system demonstration program.

Jackson, Jerry↗

Power Processing and Flow Control for a 100 kW Hall Thruster System

Aerojet Rocketdyne's NextSTEP program is developing and demonstrating a 100 kW Electric Propulsion (EP) system, the XR-100, which includes a modular power processing unit and modular xenon feed system to operate a Nested Hall Thruster (NHT) designed for powers up to 200 kW. The NextSTEP system is intended for use on large scale cargo transportation to support human missions to the Moon and Mars, which require very high-power Solar Electric Propulsion (SEP) systems operating between 200 and 400 kW. The three-year program objective is to operate the integrated EP system continuously at 100 kW for 100 hours, advancing this very high-power EP system to Technology Readiness Level (TRL) 5. In order to process the power and control propellant flow for this high-power system, Aerojet Rocketdyne has developed a modular concept for the Power Processing Units (PPUs) and Xenon feed system. The program has completed testing of critical elements of the PPU and feed system with a thruster simulator. Design upgrades to demonstrate the TRL 5 capabilities are underway. This paper will present an overview of the program and system design approach, the high power XR-100 capabilities of the PPU and feed system, and the latest test results for the 100 kW EP system demonstration program. In order to successfully execute this contract, there is a close collaboration between the teammates at Aerojet Rocketdyne (AR), the University of Michigan (UM), the NASA Jet Propulsion Laboratory (JPL), and the NASA Glenn Research Center (GRC).

Soendker, Erich↗

Power Processing and Flow Control for a 100 kW Hall Thruster System

Aerojet Rocketdyne's NextSTEP program is developing and demonstrating a 100 kW Electric Propulsion (EP) system, the XR-100, which includes a modular power processing unit and modular xenon feed system to operate a Nested Hall Thruster (NHT) designed for powers up to 200 kW. The NextSTEP system is intended for use on large scale cargo transportation to support human missions to the Moon and Mars, which require very high-power Solar Electric Propulsion (SEP) systems operating between 200 and 400 kW. The three-year program objective is to operate the integrated EP system continuously at 100 kW for 100 hours, advancing this very high-power EP system to Technology Readiness Level (TRL) 5. In order to process the power and control propellant flow for this high-power system, Aerojet Rocketdyne has developed a modular concept for the Power Processing Units (PPUs) and Xenon feed system. The program has completed testing of critical elements of the PPU and feed system with a thruster simulator. Design upgrades to demonstrate the TRL 5 capabilities are underway. This paper will present an overview of the program and system design approach, the high power XR-100 capabilities of the PPU and feed system, and the latest test results for the 100 kW EP system demonstration program. In order to successfully execute this contract, there is a close collaboration between the teammates at Aerojet Rocketdyne (AR), the University of Michigan (UM), the NASA Jet Propulsion Laboratory (JPL), and the NASA Glenn Research Center (GRC).

Hablitzel, Sam↗

Solar protons E greater than 100 Mev incident over Antarctica during January- February 1967.

Commencing at 0825 +a -1 UT on January 28, 1967, a large and prolonged increase in the intensity of penetrating charged particles was observed by balloon-borne instruments floating over Byrd Station, Antarctica. (80°S, 120°W). A peak intensity of approximately 50 protons per cm 2 -sec-steradian with E> 100 MeV occurred at about 1230 UT on the 28th. The event was under observation almost continuously over a period of about 100 hours until the intensity decayed below cosmic-ray background on February 1. The initial decay was rapid but, some 40 hours after onset, went over into a slow exponential decay characterized by a 20 hour time-constant. The decay phase of an additional, though considerably less intense, event was observed on February 3 and 4. Presumably both events had their origins in major disturbances on the far side of the sun since nether event has been definitely linked to any feature which existed on the visible disk within an appropriate time interval. Results pertaining to the time-intensity profile and to the energy spectrum for protons E> 100 MeV are presented for the January 29 event. Comparison of the balloon results with neutron-monitor and satellite measurements and with models of interplanetary diffusion has led to some conclusions regarding the role of small-angle scattering by irregularities and by the random walk of magnetic lines of force relative to the mean interplanetary field within the orbit of earth.

Energy spectrum↗

A 100,000 pulse height analyzer for use in High Energy Cosmic Ray Experiments (HECRE) on high altitude balloon flights

A description is given of a wide dynamic range pulse height analyzer system developed for use on High Energy Cosmic Ray Experiment (HECRE) Balloon Flights. A wide dynamic range of 100,000 is obtained by extending the range of a basic 1024 channel analyzer through the use of multiple ranges and range selection. The system described here contains four 100,000 pulse height analyzers. Each 100,000 pulse height analyzer consists of a group of cordwood welded modules mounted and interconnected on a printed circuit card. Four of these card assemblies, the required clock drive circuitry (discrete components mounted and interconnected on a separate card) and three input-output connectors are interconnected and mounted on the system board.

Cancro, C. A.↗

Type III solar noise observed below 100 kHz on OGO 3.

Type III solar noise bursts have been observed in the frequency range 25-100 kHz with the VLF detector on OGO 3. The bursts decrease in frequency from 100 kHz (the highest frequency of observation) to as low as 25 kHz in approximately 45 min. The intensity at 100 kHz increases for about 20 min then decays over a period of approximately 1 hr. The variation of the intensity with time becomes less regular at lower frequencies. Bursts are predominantly associated with west-limb flares. Their commencement at 100 kHz tends to follow type III bursts observed at 2-4 MHz by about 10 min. Observed drift rates and decay times correspond roughly to those extrapolated from higher frequency measurements.

Dunckel, N.↗

Preliminary design of a 100 kW turbine generator

The National Science Foundation and the Lewis Research Center have engaged jointly in a Wind Energy Program which includes the design and erection of a 100 kW wind turbine generator. The machine consists primarily of a rotor turbine, transmission, shaft, alternator, and tower. The rotor, measuring 125 feet in diameter and consisting of two variable pitch blades operates at 40 rpm and generates 100 kW of electrical power at 18 mph wind velocity. The entire assembly is placed on top of a tower 100 feet above ground level.

Puthoff, R. L.↗

The 100 ampere-hour nickel cadmium battery development program, volume 1

A program to develop a long-life, reliable and safe 100 ampere-hour sealed nickel-cadmium cell and battery module with ancillary charge control and automated test equipment to fulfill the requirements of a large Manned Orbital Space Station which uses Solar Arrays as its prime source for 25 kW of electrical power was conducted. A sealed 100 ampere-hour cell with long life potential and a replaceable, space maintainable battery module has been developed for Manned Space Station applications. The 100 ampere-hour cell has been characterized for initial (early life) anticipated conditions.

Gaston, S.↗

The 100 kW experimental wind turbine generator project

The Energy Research and Development Administration and the NASA Lewis Research Center engaged jointly in a Wind Energy Program which included the design and erection of a 100 kW wind turbine generator. This test machine consists of a rotor turbine, transmission, shaft, alternator, and tower. The rotor, measuring 125 feet in diameter and consisting of two variable pitch blades, operates at 40 rpm and generates 100 kW of electrical power at a wind velocity of 18 mph. The entire assembly is placed on top of a tower 100 feet above ground level. The machine was scheduled to be ready for operation in August, 1975.

Puthoff, R. L.↗

Adaptation of a program for nonlinear finite element analysis to the CDC STAR 100 computer

The conversion of a nonlinear finite element program to the CDC STAR 100 pipeline computer is discussed. The program called DYCAST was developed for the crash simulation of structures. Initial results with the STAR 100 computer indicated that significant gains in computation time are possible for operations on gloval arrays. However, for element level computations that do not lend themselves easily to long vector processing, the STAR 100 was slower than comparable scalar computers. On this basis it is concluded that in order for pipeline computers to impact the economic feasibility of large nonlinear analyses it is absolutely essential that algorithms be devised to improve the efficiency of element level computations.

Pifko, A. B.↗

Preliminary design development of 100 KW rotary power transfer device

Contactless power transfer devices for transferring electrical power across a rotating spacecraft interface were studied. A power level of 100 KW was of primary interest and the study was limited to alternating current devices. Rotary transformers and rotary capacitors together with the required dc to ac power conditioning electronics were examined. Microwave devices were addressed. The rotary transformer with resonant circuit power conditioning was selected as the most feasible approach. The rotary capacitor would be larger while microwave devices would be less efficient. A design analysis was made of a 100 KW, 20 kHz power transfer device consisting of a rotary transformer, power conditioning electronics, drive mechanism and heat rejection system. The size, weight and efficiency of the device were determined. The characteristics of a baseline slip ring were presented. Aspects of testing the 100 KW power transfer device were examined. The power transfer device is a feasible concept which can be implemented using presently available technologies.

Weinberger, S. M.↗

Oxidation of the Si(100) surface promoted by Sr overlayer - An X-ray photoemission study

The interaction of strontium films with the underlaying Si (100) surface and the Sr-promoted low-temperature oxidation of Si were investigated, using XPS, at three different Sr coverages (theta): theta = 0.55 monolayer (ML), theta = 1 ML, and theta = 1.85 ML. Oxygen adsorption was studied both at room temperature and at 500 C, and at oxygen exposures up to 2 x 10 to the 6th L (1 L = 10 to the -6th torr) and 2 x 10 to the 5th L, respectively. The XPS spectra of the Si2p, O1s, and Sr3d core levels were measured for the atomically clean Si, the Sr-covered Si, and for the Sr-covered Si after each oxygen exposure. Results indicate that Sr interacts with the Si(100) surface forming a strong ionic bond, and that Sr promotes the oxidation of the Si (100) surface.

Mesarwi, A.↗

Modeling 100,000-year climate fluctuations in pre-Pleistocene time series

A number of pre-Pleistocene climate records exhibit significant fluctuations at the 100,000-year (100-ky) eccentricity period, before the time of such fluctuations in global ice volume. The origin of these fluctuations has been obscure. Results reported here from a modeling study suggest that such a response can occur over low-altitude land areas involved in monsoon fluctuations. The twice yearly passage of the sun across the equator and the seasonal timing of perihelion interact to increase both 100-ky and 400-ky power in the modeled temperature field. The magnitude of the temperature response is sufficiently large to leave an imprint on the geologic record, and simulated fluctuations resemble those found in records of Triassic lake levels.

Crowley, Thomas J.↗