Search NASA⌕ Search

SEARCH · Search NASA

Results for “2-H”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pressure sintering of Si3N4-Al2O3 /Sialon/

Essentially pore-free Sialon bodies were obtained by pressure sintering for three blends (mol ratios of 4:1, 2:3, and 3:2) of Si3N4 and Al2O3 powders under the conditions of 27.6 MN/sq m and a temperature of 1700 C for 2 h. These dense bodies consist mainly of a Sialon solid solution with a minor amount of a particular second phase. The higher the Al2O3 content (20 to 60 mol% range) in Sialon, the higher the densification rate. Fully dense bodies can be obtained at temperatures as low as 1500 C at 27.6 MN/sq m for 2 h with no second phase detectable by X-ray diffraction. A 100% dense body can be obtained by heating at 1700 C at 27.6 MN/sq m without a holding time.

Yeh, H. C.↗

Rotational relaxation in parahydrogen and its mixtures with helium, neon, and argon at 300 deg K.

Ultrasonic‐velocity dispersion measurements have been performed in parahydrogen and its mixtures with helium, neon, and argon, all at 300°K. In each case the experimental dispersion curves can be matched successfully to those calculated under the assumption that the 0–2 rotational transition relaxes separately from the 2–4 and higher‐order terms. For pure pH 2 we find a relaxation time 𝜏 20 of 1.30 × 10 −8 sec for the 2 → 0 transition and a 𝜏 42 of 3.90 × 10 −8 sec for the 4 → 2 transition. Comparison with the quantum‐mechanical theories of Roberts and of Davison for H 2 –H 2 collisions using Morse potentials shows good agreement for 𝜏 20 over the temperature range of 75°–300°K. The Morse‐potential asymmetry parameter yielding the best fit is β = 0.113 for Roberts' calculation and 0.108 for Davison's. It is found that He–pH 2 collisions are more effective than pH 2 –pH 2 in producing the J = 0 to J = 2 transition, but less effective for higher‐order transitions. Collisions of neon with pH 2 are found to be more effective at room temperature for inducing the 0 → 2 and 2 → 4 transitions than either helium or argon.

Leonard M Valley↗

Deuterium and tritium from solar flares at approximately 10 MeV per nucleon

It is indicated that the observations with the high-resolution solid-state charged-particle telescopes of the IMP-5 and IMP-6 earth satellites have resolved all the hydrogen and helium isotopes of solar-flare origin in groups of solar flares during the period from September, 1969, through November, 1972. The values obtained for the average isotope ratios are given and are compared with previous values. It is concluded that the observed high yields of H(2), H(3) and He(3) can be explained only by high-energy nuclear interactions and that an acceleration process must have taken place in the chromosphere at that time.

Anglin, J. D.↗

Hazard analysis of Clostridium perfringens in the Skylab Food System

The Skylab Food System presented unique microbiological problems because food was warmed in null-gravity and because the heat source was limited to 69.4 C (to prevent boiling in null-gravity). For these reasons, the foods were manufactured using critical control point techniques of quality control coupled with appropriate hazard analyses. One of these hazard analyses evaluated the threat from Clostridium perfringens. Samples of food were inoculated with C. perfringens and incubated for 2 h at temperatures ranging from 25 to 55 C. Generation times were determined for the foods at various temperatures. Results of these tests were evaluated taking into consideration: food-borne disease epidemiology, the Skylab food manufacturing procedures, and the performance requirements of the Skylab Food System. Based on this hazard analysis, a limit for C. perfringens of 100/g was established for Skylab foods.

Bourland, C. T.↗

Preferential concentration of certain elements in smaller aerosols emitted from aircraft engines

Aerosols from aircraft engines were collected with an eight-stage cascade sampler for a period of 24 h. The aerosol samples from each stage were analyzed for their elemental composition using the proton-induced X-ray emission (PIXE) technique. Seventeen elements (Si, P, S, Cl, K, Ca, Ti, V, Fe, Ni, Cu, Zn, Br, Sr, Nb, Sn, and Pb) were positively identified and quantitated at each stage. Six elements (S, Ca, Fe, Zn, Sn, and Pb) showed a fractional concentration increase with decreasing aerosol size. Similar, but less well-defined, trends were also observed for V and Ni. Silicon and chlorine, on the other hand, showed an opposite trend. Neutron-activation analysis of bulk aerosol samples collected every 2 h over the same period showed a correlation between concentration of Si, Ca, V, Ti, Zn, Br, and Sn and the density of air traffic at the airport. Analysis of the aviation-fuel samples by PIXE indicates that major fractions of Pb, Sn, Br, Zn, Ni, Fe, V, Ca, and S observed in these aerosol studies come from the aircraft engine exhaust.

Jolly, R. K.↗

Wind estimates from cloud motions - Phase 1 of an in situ aircraft verification experiment

An initial experiment has been conducted to verify geostationary-satellite-derived cloud motion wind estimates with in situ aircraft wind velocity measurements. Case histories of 1/2 to 2 h were obtained for 3-10 km diameter cumulus cloud systems on 6 days. Also, one cirrus cloud case was obtained. In most cases the clouds were discrete enough that both the cloud motion and the ambient wind could be measured with the same aircraft Inertial Navigation System (INS). Since the INS drift error is the same for both the cloud motion and wind measurements, the drift error drops out of the relative motion determinations. The magnitude of the vector difference between the cloud motion and the ambient wind at the cloud base averaged 1.2 m/sec. The wind vector at higher levels in the cloud layer differed by about 3 to 5 m/sec from the cloud motion vector.

Hasler, A. F.↗

Denitrogenation interruptions with air

A 3-h denitrogenation period at ground-level pressure with 95% O2-5% N2, with an air interruption of 5 min or more and matched with additional denitrogenation time equal to the interruption, will later result occasionally in altitude decompression sickness ('bends') during a 2-h decompression exposure at 3.8 psia (10,058 m equivalent) with 92% O2- 8% N2. Thus the equal time or 'mirror-image' make-up time for loss of denitrogenation did not prevent bends 7 times in 17 subjects during 71 exposures with air interruptions; on the other hand, no case of bends was reported after uninterrupted denitrogenation periods. Nitrogen-loading during the interruptive period is believed to resupply the bends sites with additional nitrogen, which re-establishes conditions favoring a return to a high incidence of bends.

Cooke, J. P.↗

Traction studies of northeast corridor rail passenger service: Executive summary

The enabling legislation of 1976 for improvement of service in the Northeast corridor (NEC) requires a schedule of 2 h 40 min between Washington and New York City by 1981 and 3 h 40 min between NYC and Boston, when the electrification is completed. Various options of the NEC operation that may satisfy the legislation were investigated, particularly in terms of travel time and energy consumption. NEC operations were compared with overseas systems and practices. The emerging new technology of AC traction was also evaluated.

Macie, T. W.↗

Observations of emission lines in M supergiants

Copernicus observations of Mg 2 h and k emission lines from M giants and supergiants are described. Supergiants with extensive circumstellar gas shells show an asymmetric k line. The asymmetry is ascribed to superimposed lines of Fe 1 and Mn 1. The Mg 2 line width fit the Wilson-Bappu relation derived from observations of G and K Stars. Results of correlated ground-based observations include (1) the discovery of K 1 fluorescent emission from the Betelgeuse shell; (2) extimates of the mass-loss rates; and (3) the proposal that silicate dust grains must account for the major fraction of the Si atoms in the Betelgeuse shell.

Lambert, D. L.↗

Shallow convection on day 261 of GATE - Mesoscale arcs

Cloudy convection in the moist layer of a cloud cluster growing in the GATE ship array is examined. Analyses suggest that the moist layer was dominated by features of horizontal dimension roughly 40 km and lifetime roughly 2 h, with arc patterns triggered by dense downdraft air accompanying rainfall, and composed of many small cumulus clouds. Aircraft recorded data on thermodynamic quantities and winds, indicating that the arcs persisted as mesoscale circulations driven by the release of latent heat in the clouds, rather than being driven by the original density current at the surface. It is also suggested that the mesoscale cloud patterns of the moist layer play a primary role in heat transfer upward within this layer, and contribute to the forcing of showering midtropospheric clouds.

Warner, C.↗

Moisture convergence using satellite-derived wind fields - A severe local storm case study

Five-minute interval 1-km resolution SMS visible channel data were used to derive low-level wind fields by tracking small cumulus clouds on NASA's Atmospheric and Oceanographic Information Processing System. The satellite-derived wind fields were combined with surface mixing ratios to derive horizontal moisture convergence in the prestorm environment of April 24, 1975. Storms began developing in an area extending from southwest Oklahoma to eastern Tennessee 2 h subsequent to the time of the derived fields. The maximum moisture convergence was computed to be 0.0022 g/kg per sec and areas of low-level convergence of moisture were in general indicative of regions of severe storm genesis. The resultant moisture convergence fields derived from two wind sets 20 min apart were spatially consistent and reflected the mesoscale forcing of ensuing storm development. Results are discussed with regard to possible limitations in quantifying the relationship between low-level flow and between low-level flow and satellite-derived cumulus motion in an antecedent storm environment.

Negri, A. J.↗

Stellar chromospheres

Developments in the understanding and use of chromospheric diagnostics are discussed with emphasis on the following aspects: (1) trends emerging from semiempirical models of single stars; (2) the validity of claims that theoretical models of chromospheres are becoming realistic; (3) the correlation between the widths of Ca 2 H and K line emission cores and stellar absolute luminosity extending over 15 magnitudes (Wilson-Bappu relation); and (4) the existence of systematic flow patterns in stellar chromospheres.

Linsky, J. L.↗

Effects of vasopressin administration on diuresis of water immersion in normal humans

The influence of vasopressin suppression on the diuresis encountered during water immersion is investigated in studies on normal humans immersed to the neck. Six hydrated male subjects were studied on two occasions while undergoing 6 h of immersion without or during the administration of aqueous vasopressin for the initial 4 h. Neck immersion is found to result in a significant increase in urinary flow rate beginning in the first hour and persisting throughout the immersion. The administration of vasopressin markedly attenuated the diuretic response throughout the period of infusion, while cessation of vasopressin administration during the final 2 h of immersion resulted in a marked offset of the antidiuresis. Results thus support the view that the suppression of antidiuretic hormone contributes to the immersion diuresis of hydrated subjects.

Epstein, M.↗

Hydrogen chloride measurements in the Space Shuttle exhaust cloud - First launch, April 12, 1981

Partitioning of hydrogen chloride between the aerosol and gaseous phases in the first Space Shuttle exhaust cloud was experimentally investigated as the exhaust cloud was diluted with ambient air. Airborne measurements were obtained of gaseous hydrogen chloride (HCl), total HCl, relative humidity, and temperature to determine the conditions controlling HCl aerosol formation in the Shuttle exhaust cloud. Two segments of the cloud, each at a significantly different relative humidity, were monitored. Equilibrium predictions of HCl aerosol formation agreed with the measured HCl partitioning at the higher and lower relative humidity conditions, but do not agree at the aerosol formation threshold region. Measurements were taken in the Shuttle exhaust cloud from 8.6 min until 2 h and 8 min after launch. HCl concentrations ranged from 17.5 to 0.9 ppm and relative humidity from 86% to less than 10%.

Sebacher, D. I.↗

Simultaneous radio scattering and white light observations of a coronal transient

Reports that a coronal transient observed by the Solwind coronagraph off the west limb of the sun was also seen in the spectral broadening observations of the Helois-2 2.3 GHz radio signal. These simultaneous data are compared and applied to studies of the shock front. UT difference images show a time difference of up to 2 h between shock and white light occurrences. Helios and Voyager shock speed measurements are consistent, implying that the event observed by Helios is a shock. These coronal transient data show that the shock front is ahead of the white light front, but additional observations of larger events will contribute information to the understanding of coronal transient evolution as they propagate away from the sun.

Woo, R.↗

Thermoregulation in Erythrocebus patas - A thermal balance study

The ability of nonacclimated patas monkeys (Erythrocebus patas) to maintain a constant core temperature at six ambient temperatures from 15 to 40 C is investigated experimentally in 3 male and 3 female animals weighing 3.9-6.0 kg. The monkeys were permitted to reach equilibrium at the test Ta for at least 2 h before O2-uptake, CO2 output, weighted skin temperature (Tsk), rectal temperature (Tre), respiratory evaporative water loss (Eresp) and total evaporative water loss (Etot) were measured for 30 min. The results are presented in tables and graphs. Tsk is found to vary (from about 30.7 to about 37.2 C) with Ta, while Tre increases only from 37.6 to 38.4 C; Etot increases from about 9 to about 76 W/sq m, mainly due to eccrine sweating. Total body conductance, Tsk, and Tre are shown to be lower (the conductance significantly) at 40 C than those of rhesus monkeys. It is suggested that the enhanced heat tolerance of E. patas makes this species an appropriate subject for further studies of primate temperature regulation.

Kolka, M. A.↗

Current concepts of space flight induced changes in hormonal control of fluid and electrolyte metabolism

A systematic analysis of body fluid and renal dynamics during simulated space flight (head-down bedrest) was undertaken to increase understanding of the physiologic effects of acute cephalad fluid shifts. The earliest effects were increases in central venous pressure and decreases in plasma aldosterone, epinephrine and norepinephrine and glomerular filtration rate, 2 h after the beginning of bedrest. Decreases in plasma angiotensin I at 6 h may have resulted from the increased effective pressure and decreased sympathetic activity seen earlier in bedrest. The early decrease in aldosterone and ADH is thought to contribute to an increase, by 6 h, in urinary excretion of salt and water. Fluid and electrolyte losses occur during space flight, and analysis of body fluids from Space Shuttle crewmembers has indicated that conservation of these substances is begun almost immediately upon cessation of weightlessness. Operational medicine measures to counteract dehydration and electrolyte loss resulted in a less extreme physiologic response to the flight.

Leach, C. S.↗

Impact properties of rubber-modified epoxy resin-graphite-fiber composites

To improve the impact resistance of graphite-fiber composites, a commercial and an experimental epoxy resin were modified with liquid reactive rubber and a brominated epoxy resin. The commercial epoxy was a tetrafunctional resin, and the experimental epoxy was a trifunctional resin. The reactive rubber was a carboxyl-terminated butadiene-acrylonitrile copolymer. The rubber content was varied from 0 to 25 percent (wt). The brominated epoxy resin was used at Br levels of 4, 19, and 35 percent of the resin. Composites were prepared with woven graphite cloth reinforcement. The composites were evaluated by using flexural strength in the dry state and an elevated temperature after saturation with water. The impact properties were determined by measuring shear strength after falling-ball impact and instrumented impact. The rubber-modified, trifunctional resin exhibited better properties, when tested in hot-wet conditions in a heated oven at 366 K (after boiling the material for 2 h in demineralized water), than the tetrafunctional resin. Improved impact resistance was observed with the addition of the reactive rubber to the epoxy resin. Further improvement was observed with the addition of the brominated epoxy resin.

Gilwee, W. J.↗