Search NASA⌕ Search

SEARCH · Search NASA

Results for “2.4 GHz”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Monitoring Mars for Electrostatic Disturbances

The DSN radio telescope DSS-13 was used to monitor Mars for electrostatic discharges from 17 February to 11 April, 2010, and from 19 April to 4 May, 2011, over a total of 72 sessions. Of these sessions, few showed noteworthy results and no outstanding electrostatic disturbances were observed on Mars from analyzing the kurtosis of radio emission from Mars. Electrostatic discharges on mars were originally detected in June of 2006 by Ruf et al. using DSS-13. he kurtosis (normalized fourth moment of the electrical field strength) is sensitive to non-thermal radiation. Two frequencies bands, either 2.4 and 8.4 GHz or 8.4 and 32 GHz were used. The non-thermal radiation spectrum should have peaks at the lowest three modes of the theoretical Schumann Resonances of Mars. The telescope was pointed away from Mars every 5 minutes for 45 seconds to confirm if Mars was indeed the sources of any events. It was shown that by including a down-link signal in one channel and by observing when the kurtosis changed as the telescope was pointed away from the source that the procedure can monitor Mars without the need of extra equipment monitoring a control source.

electrostatic discharges↗
NASA NTRS1986

Microwave performance of a quarter-micrometer gate low-noise pseudomorphic InGaAs/AlGaAs modulation-doped field effect transistor

Excellent dc and millimeter-wave performance is reported in In0.15Ga0.85As/Al0.15Ga0.85As pseudomorphic modulation-doped field effect transistors (MODFET's) with 0.25-micron-length gates. Extrinsic transconductances as high as 495 mS/mm at 300 K and unprecedented power performance in the 60-GHz range were observed. Although not yet optimized, excellent low noise characteristics, 0.9 dB, with an associated gain of 10.4 dB at 18 GHz, and a noise figure of 2.4 dB with an associated gain of 4.4 dB at 62 GHz were obtained. This is the best noise performance ever reported for a MODFET in this frequency range. These results clearly demonstrate the superiority of pseudomorphic MODFET structures in high-frequency applications.

Henderson, T.↗
NASA NTRS1994

Insoluble, Low-Dielectric-Constant Polyimides

In process, insoluble, low-dielectric-constant polyimides produced by combining dianhydride of bis{4-(3,4-dicarboxyphenoxy) phenyl}perfluoroisopropylidene (BFDA) with fluorinated aromatic diamine; each molecule contains at least one or more CF3 groups. These fully fluorinated polyimides have dielectric constants in range of 2.4 to 2.5 at 10 GHz. Suitable for use as composite matrix resins in advanced aerospace applications. Potential use in microelectronics industry, particularly as insulating resins in production of printed-circuit boards.

St. Clair, Anne K.↗
NASA NTRS2000

Continued RXTE Observations of Three Blazars

This project continued (during Cycle 3 of the RXTE mission) weekly observations of the quasars PKS 1510-089 and 3C 454.3 and the BL Lac object OJ 287. The data were analyzed by the PI and his graduate student. In the middle of Cycle 3, the PI changed the mode of observation of 3C 454.3, based on a report from another astronomer that observations with the Rosat satellite had found a strong confusing X-ray source about 45 arcmin away. The RXTE observations, in which the flux was measured while pointing directly at 3C 454.3 and then 15' from 3C 454.3, in the direction away from the confusing source. The flux decreased considerably, and so it appears that nearly all the X-ray flux measured by RXTE comes from the confusing source rather than the quasar. OJ 287 was detected only at one epoch of the Cycle 3 observations. This corresponded to a particularly quiet period for this source, when its flux at other wavebands was also low. From the single epoch of detection, no conclusions can be drawn concerning the general nature of the X-ray emission from this object. In contrast to the other two sources, the results of the observations of PKS 1510-089, when combined with data from cycles 3 and 4, are very interesting. The RXTE (2.4-20 keV) abd 14.5 GHz University of Michigan Radio Astronomy Observatory (UMRAO) light curves through the end of RXTE Cycle 4 are shown for PKS 1510-089. Visual inspection reveals an obvious correlation between the X-ray and 14.5 GHz light curves. While this is as expected in the SSC model in a source with simultaneous mm-wave (the photons thought to be scattered to X-ray energies) and cm-wave variations, the X-ray spectrum is flat ("energy" spectral index alpha = 0.2-0.5, where F (sub v) proportional to v (sup - alpha)) compared with the mm-wave synchrotron spectrum (alpha approximately equal to 0.8). The PI is currently engaged in theoretical work to determine whether this is possible for an SSC model.

Marscher, Alan P.↗
NASA NTRS2015

Wideband Array for C, X, and Ku-Band Applications with 5.3:1 Bandwidth

Planar arrays that exploit strong intentional coupling between elements have allowed for very wide bandwidths in low-profile configurations. However, such designs also require complex impedance matching networks that must also be very compact. For many space applications, typically occurring at C-, X-, Ku-, and most recently at Ka-band, such designs require specialized and expensive fabrication techniques. To address this issue, a novel ultra-wideband array is presented, using a simplified feed network to reduce fabrication cost. The array operates from 3.5-18.5 GHz with VSWR less than 2.4 at broadside, and is of very low profile, having a total height of lambda/10 at the lowest frequency of operation. Validation is provided using a 64-element prototype array, fabricated using common Printed Circuit Board (PCB) technology. The low size, weight, and cost of this array make it attractive for space-borne applications.

X-↗
NASA NTRS1989

Ion-implanted high microwave power indium phosphide transistors

Encapsulated rapid thermal annealing (RTA) has been used in the fabrication of InP power MISFETs with ion-implanted source, drain, and active-channel regions. The MISFETs had a gate length of 1.4 microns. Six to ten gate fingers per device, with individual gate finger widths of 100 or 125 microns, were used to make MISFETs with total gate widths of 0.75, 0.8, or 1 mm. The source and drain contact regions and the channel region of the MISFETs were fabricated using Si implants in InP at energies from 60 to 360 keV with doses of (1-560) x 10 to the 12th/sq cm. The implants were activated using RTA at 700 C for 30 sec in N2 or H2 ambients using an Si3N4 encapsulant. The high-power high-efficiency MISFETs were characterized at 9.7 GHz, and the output microwave power density for the RTA conditions used was as high as 2.4 W/mm. For a 1-W input at 9.7 GHz gains up to 3.7 dB were observed, with an associated power-added efficiency of 29 percent and output power density 70 percent greater than that of GaAs MESFETs.

Biedenbender, Michael D.↗
NASA NTRS2021

The Atacama Cosmology Telescope: delensed power spectra and parameters

We present ΛCDM cosmological parameter constraints obtained from delensed microwave background power spectra. Lensing maps from a subset of DR4 data from the Atacama Cosmology Telescope (ACT) are used to undo the lensing effect in ACT spectra observed at 150 and 98 GHz. At 150 GHz, we remove the lensing distortion with an effective efficiency of 30% (T T), 30% (EE), 26% (T E) and 20% (BB); this results in detections of the delensing effect at 8.7σ (T T), 5.1σ (EE), 2.6σ (T E), and 2.4σ (BB) significance. The combination of 150 and 98 GHz T T, EE, and T E delensed spectra is well fit by a standard ΛCDM model. We also measure the shift in best-fit parameters when fitting delensed versus lensed spectra; while this shift does not inform our ability to measure cosmological parameters, it does provide a three-way consistency check among the lensing inferred from the best-fit parameters, the lensing in the CMB power spectrum, and the reconstructed lensing map. This shift is predicted to be zero when fitting with the correct model since both lensed and delensed spectra originate from the same region of sky. Fitting with a ΛCDM model and marginalizing over foregrounds, we find that the shift in cosmological parameters is consistent with zero. Our results show that gravitational lensing of the microwave background is internally consistent within the framework of the standard cosmological model.

Dongwon Han↗
NASA NTRS1992

Monolithic millimeter-wave diode grid frequency multiplier arrays

Monolithic diode frequency multiplier arrays, including barrier-N-N(+) (BNN) doubler, multi-quantum-barrier-varactor (MQBV) tripler, Schottky-quantum-barrier-varactor (SQBV) tripler, and resonant-tunneling-diode (RTD) tripler arrays, have been successfully fabricated with yields between 85 and 99 percent. Frequency doubling and/or tripling have been observed for all the arrays. Output powers of 2.4-2.6 W (eta = 10-18 percent) at 66 GHz with the BNN doubler and 3.8-10 W (eta = 1.7-4 percent) at 99 GHz with the SQBV tripler have been achieved.

Liu, Hong-Xia L.↗
NASA NTRS1994

The nature of the dense obscuring material in the nucleus of NGC 1068

High spatial and spectral resolution observations of the distribution, physical parameters, and kinematics of the molecular interstellar medium toward the nucleus of the Seyfert 2 galaxy NGC 1068 are reported. The data consist of 2.4 by 3.4 arcseconds resolution interferometry of the 88.6 GHz HCN J = 1 towards 0 line at 17 km/s spectral resolution, single dish observations of several mm/submm isotopic lines of CO and HCN, and 0.85 arcseconds imaging spectroscopy of the 2.12 micron H2 S(1) line at a velocity resolution of 110 km/s. The central few hundred parsecs of NGC 1068 contain a system of dense (N(H2) approximately 10(exp 5) cm(exp -3)), warm (T greater than or equal to 70 K) molecular cloud cores. The low density molecular envelopes have probably been stripped by the nuclear wind and radiation. The molecular gas layer is located in the plane of NGC 1068's large scale disk (inclination approximately 35 deg) and orbits in elliptical streamlines in response to the central stellar bar. The spatial distribution of the 2 micron H2 emission suggests that gas is shocked at the leading edge of the bar, probably resulting in gas influx into the central 100 pc at a rate of a few solar mass per year. In addition to large scale streaming (with a solid body rotation curve), the HCN velocity field requires the presence of random motions of order 100 km/s. We interpret these large random motions as implying the nuclear gas disk to be very thick (scale height/radius approximately 1), probably as the result of the impact of nuclear radiation and wind on orbiting molecular clouds. Geometry and column density of the molecular cloud layer between approximately 30 pc to 300 pc from the nucleus can plausibly account for the nuclear obscuration and anisotropy of the radiation field in the visible and UV.

Tacconi, L. J.↗
NASA NTRS1976

The solar brightness temperature at millimeter wavelengths

Measurements of the brightness temperature of the sun near 36 GHz and 93 GHz were made using the new moon as a calibration source. Provided the brightness temperature of the moon is known and all measurements are reduced to the same zenith angle, a simple expression can be used for the sun-to-new moon ratio which is independent of antenna gain, atmospheric absorption and reemission, and radiometer calibration constants. This ratio was measured near 36 GHz and at two frequencies near 93 GHz with a Dicke switched superheterodyne radiometer system and a 2.4 m Cassegrain antenna. The slopes of the solar brightness temperature spectrum based on these ratios were measured. The absolute solar brightness spectrum derived from all current available measurements supplemented by the present ones is also plotted and discussed.

Kuseski, R. A.↗
NASA NTRS1977

Utilization of NASA Lewis mobile terminals for the Hermes satellite

The paper describes the portable earth terminal (PET) and the transportable earth terminal (TET) which enable two-way television and voice communication. Both terminals were developed by NASA and utilize the high power of the Hermes satellite. PET is a bus-type vehicle which has receiving equipment for full duplex color television and which can transmit programs originating in either the on-board PET studio or in nearby buildings. PET has a collapsible 2.4-m diameter parabolic antenna interfacing with a 500-watt 14-GHz wideband TV transmitter and a 12-GHz wideband TV receiver system. TET uses two parabolic reflector antennas, 3 m and 1.2 m in diameter, mounted on a flat trailer towed by a truck. TET can receive and relay color TV signals, and its narrowband transmitter can serve as a return audio link permitting a question-and-answer format. Also described are uplink and downlink performance characteristics, operation procedures, and field demonstrations which enabled personnel at several hospitals to participate in a distant medical conference.

Edelman, E. A.↗
NASA NTRS1978

Low-noise Josephson mixers at 115 GHz using recyclable point contacts

Thermally recyclable Nb point-contact Josephson junctions are investigated as low-noise mixers with an external local oscillator at 115 GHz. The best single sideband mixer noise temperature achieved is 140 (+ or - 20) K with a single sideband conversion loss of 2.4 (+ or - 0.5) dB. Such rugged junctions are suitable for use in practical receivers and should give unprecedented sensitivity at the shorter millimeter wavelengths.

Taur, Y.↗
NASA NTRS1995

ACTS aeronautical terminal experiment: System description and link analysis

During the summer of 1994, the performance of an experimental mobile satellite communication system was demonstrated to the industry and government representatives by the NASA Lewis Research Center (LeRC) and the Jet Propulsion Laboratory (JPL). The system was based on the Advanced Communications Technology Satellite (ACTS) and consisted of an K-/Ka-band active MMIC phased array antenna system, ACTS Mobile Terminal (AMT) and Link Evaluation Terminal (LET). A LeRC research aircraft, Learjet Model 25, was outfitted with the active MMIC phased array antenna system and AMT and served as the experimental 20/30 Ghz aeronautical terminal. The LET at LeRC in Cleveland, OH was interfaced with portions of fixed-AMT equipment and together provided the gateway station functions including ACTS satellite interface and Public Service Telephone Network (PSTN) interface. The ACTS was operated in its Microwave Switch Matrix (MSM) mode with a spot beam for the Learjet and another spot beam dedicated to the LET. The Learjet was flown over several major cities across the US and demonstrated the feasibility of full-duplex compressed voice link for an aeronautical terminal through the 20/30 Ghz ACTS satellite channel. This paper will present a technical description of the system including the MMIC phased array antenna system, AMT, Learjet, LET and ACTS satellite. The array antenna system consists of a 30 Ghz transmit array (LeRC/Texas Instruments) and two 20 Ghz receive arrays (USAF Rome Lab/Boeing and Martin Marietta), each one very small with sufficient performance for satellite voice link. The AMT consists of 2.4/4.8/9.6 Kbps voice coder/decoder, modem, PSTN interface and RF/IF converters. Link analysis will be presented and compared to the actual performance data collected during the demonstration flights.

Sohn, Philip↗
NASA NTRS1996

ACTS Aeronautical Terminal Experiment System Description and Link Analysis

During the summer of 1994, the performance of an experimental mobile satellite communication system was demonstrated to industry and government representatives by the NASA Lewis Research Center (LeRC) and the Jet Propulsion Laboratory (JPL). The system was based on the advanced communications technology satellite (ACTS) and consisted of a K-/Ka-band active monolithic microwave integrated circuit (MMIC) phased array antenna system, ACTS mobile terminal (AMT) and link evaluation terminal (LET). A LeRC research aircraft, Learjet model 25, was outfitted with the active MMIC phased array antenna system and AMT and served as the experimental 20/30 Ghz aeronautical terminal. The LET at LeRC in Cleveland, OH, was interfaced with portions of fixed-AMT equipment and together provided the gateway station functions including ACTS interface and public service telephone network (PSTN) interface. The ACTS was operated in its microwave switch matrix (MSM) mode with a spot beam for the Learjet and another spot beam dedicated to the LET. The Learjet was flown over several major cities across the US and demonstrated the feasibility of a full-duplex compressed voice links for an aeronautical terminal through the 20/30 Ghz ACTS channel. This paper presents a technical description of the system including the MMIC phased array antenna system, AMT, Learjet, LET, and ACTS. The array antenna system consists of a 30 Ghz transmit array (LeRc/Texas Instruments) and two 20 Ghz receive arrays (USAF Rome Lab., Boeing, and Martin Marietta), each one very small with sufficient performance for a satellite voice link. The AMT consists of 2.4/4.8/9.6 Kbps voice coder/decoder, modem, PSTN interface and RF/IF converters. Link analysis is presented and compared to the actual performance data collected during the demonstration flights.

Sohn, Philip↗
NASA NTRS2026

Atacama Cosmology Telescope A Measurement of Galaxy Cluster Temperatures Through Relativistic Corrections to the Thermal Sunyaev-Zeldovich Effect

The high electron temperature in galaxy clusters (> 1 keV or > 107 K) leads to corrections at the level of a few percent in their thermal Sunyaev-Zeldovich effect signatures. Both the size and frequency dependence of these corrections, which are known as relativistic temperature corrections, depend upon the temperature of the objects. In this work we exploit this effect to measure the average temperature of a stack of Compton-y selected clusters. Specifically, we apply the “spectroscopic method” and search for the temperature that best fits the clusters’ signal measured at frequencies from 30 to 545 GHz by the Atacama Cosmology Telescope and Planck satellite. We measure the average temperature of clusters detected in the Atacama Cosmology Telescope maps to be 8.5 2.4 keV, with an additional systematic error of comparable amplitude dominated by passband uncertainty. Upcoming surveys, such as the Simons Observatory and CMB-S4, have the potential to dramatically improve upon these measurements and thereby enable precision studies of cluster temperatures with millimeter observations. The key challenge for future observations will be mitigating instrumental systematic effects, which already limit this analysis.

William R Coulton↗
NASA NTRS2004

Revealing the X-Ray Emission Processes of Old Rotation-Powered Pulsars: XMM-Newton Observations of PSR B0950+08, PSR B0823+26 and PSR J2043+2740

We have completed part of a program to study the X-ray emission properties of old rotation-powered pulsars with XMM-Newton in order to probe and identify the origin of their X radiation. The X-ray emission from these old pulsars is largely dominated by non-thermal processes. None of the observed spectra required adding a thermal component consisting of either a hot polar cap or surface cooling emission to model the data. The energy spectrum of PSR B0950+08 is best described by a single power law of photon-index alpha = 1.93(sup +0.14)(sub -0.12). Three-sigma temperature upper limits for possible contributions from a heated polar cap or the whole neutron star surface are T(sup infinity)(sub pc) < 0.87 x 10(exp 6) K and T(sup infinity)(sub s) < 0.48 x 10(exp 6) K, respectively. We also find that the X-ray emission from PSR B0950+08 is pulsed with two peaks per rotation period. The phase separation between the two X-ray peaks is approx. 144 deg (maximum to maximum) which is similar to the pulse peak separation observed in the radio band at 1.4 GHz. The fraction of X-ray pulsed photons is approx. 30%. A phase resolved spectral analysis confirms the nonthermal nature of the pulsed emission and finds power law slopes of alpha = 2.4(sup +0.52)(sub -0.42) and alpha = 1.93(sup +0.29)(sub -0.24) for the pulse peaks P1 and P2, respectively. The spectral emission properties observed for PSR B0823+26 are similar to those of PSR B0950+08. Its energy spectrum is very well described by a single power law with photon-index alpha = 2.5(sup +0.52)(sub -0.24. Three-sigma temperature upper limits for thermal contributions from a hot polar cap or from the entire neutron star surface are T(sup infinity)(sub pc) < 1.17 x 10(exp 6) K and T(sup infinity)(sub s) < 0.5 x 10(exp 6) K, respectively. There is evidence for pulsed X-ray emission at the - 97% confidence level with a pulsed fraction of 49 +/- 22%. For PSR 52043+2740 we report the first detection of X-ray emission. A power law spectrum, or a combination of a thermal and a power law spectrum all yield acceptable descriptions of its X-ray spectrum. No X-ray pulses are detected from PSR J2043+2740 but the sensitivity is low - the 2-sigma pulsed fraction upper limit is 57% assuming a sinusoidal pulse profile.

Becker, Werner↗
NASA NTRS1998

A 2 THz Heterodyne Array Receiver for SOFIA

We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approx. 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the FIR portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galaxy evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (greater than or equal to 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. Figure 1 is a photograph of the 2 THz double feedhorn structure designed and constructed under the auspices of this grant. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. Figure 2 is the beam pattern obtained from it. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. Figure 3 is an illustration of the focal plane array concept we developed lot- SOFIA base upon this work. Un- fortunately, our instrument proposal was not selected as a first generation SOFIA instrument. However, we have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts. Our work under NAG 2-1057 was very rewarding and we appreciate the opportunity provided by NASA to pursue it. The research led directly to publishing 2 papers (listed below) and the award of an NSF grant to our group to construct a laser micromachining system on the University of Arizona campus.

Walker, Christopher K.↗
NASA NTRS1998

A 2 THz Heterodyne Array Receiver for SOFIA: Summary of Research

We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approximately 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the Far-Infra Red (FIR) portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galactic evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (> 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. We have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts.

Walker, Christopher K.↗