Electronics & 3D printing for the Modern Chemical Biology Laboratory [Slides]
Abstract not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
This poster describes research about biomass-digesting microorganisms that produce structured biomass-degrading enzyme complexes.
Modern 3D electron microscopy approaches have recently allowed unprecedented insight into the 3D ultrastructural organization of cells and tissues, enabling the visualization of large macromolecular machines, such as adhesion complexes, as well as higher-order structures, such as the cytoskeleton and cellular organelles in their respective cell and tissue context. Given the inherent complexity of cellular volumes, it is essential to first extract the features of interest in order to allow visualization, quantification, and therefore comprehension of their 3D organization. Each data set is defined by distinct characteristics, e.g., signal-to-noise ratio, crispness (sharpness) of the data, heterogeneity of its features, crowdedness of features, presence or absence of characteristic shapes that allow for easy identification, and the percentage of the entire volume that a specific region of interest occupies. All these characteristics need to be considered when deciding on which approach to take for segmentation. The six different 3D ultrastructural data sets presented were obtained by three different imaging approaches: resin embedded stained electron tomography, focused ion beam- and serial block face- scanning electron microscopy (FIB-SEM, SBF-SEM) of mildly stained and heavily stained samples, respectively. For these data sets, four different segmentation approaches have been applied: (1) fully manual model building followed solely by visualization of the model, (2) manual tracing segmentation of the data followed by surface rendering, (3) semi-automated approaches followed by surface rendering, or (4) automated custom-designed segmentation algorithms followed by surface rendering and quantitative analysis. Depending on the combination of data set characteristics, it was found that typically one of these four categorical approaches outperforms the others, but depending on the exact sequence of criteria, more than one approach may be successful. Based on these data, we propose a triage scheme that categorizes both objective data set characteristics and subjective personal criteria for the analysis of the different data sets.
Purpose: 3D printing technology could simplify and improve electron bolus fabrication. The purpose of this study was to characterize the density, dimensional accuracy, uniformity, and attenuation of PLA boluses fabricated with a low-cost 3D printer. Methods: Several solid square slabs were printed with specific requested dimensions and 100% infill using different fill patterns. These pieces were imaged using an x-ray flat panel imager in order to check for uniformity of the prints. Percentage depth doses (PDDs) were measured downstream of the slabs in solid water using a parallel plate chamber and compared to measurements in water in order to characterize attenuation. The dimensions of the PLA slabs were measured using digital calipers. The slabs were also weighed to find their density. Results: The fill pattern used to create boluses can affect the attenuation of the bolus. Fill patterns should be chosen carefully and quality assurance should be done for each printed piece. PLA causes the electron PDD to shift towards shallower depths, compared to water, by 1.7 mm for each centimeter of PLA. Agreement with design dimensions was within 1 mm in the plane of the printer bed, and within 1/3 of a millimeter (roughly the thickness of a single layer), perpendicular to the printer bed. Average density was in the range 1.20 – 1.22. Conclusions: 3D printing shows great promise for use in fabricating electron bolus. This work indicates that printed PLA can be a suitable material provided the increased attenuation is properly accounted for.
Diamine functionalization of the metal−organic framework Mg 2 (dobpdc) (dobpdc 4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) significantly enhances its selectivity for CO 2 capture from flue gases and air. The structure and CO 2 capacity of such materials are typically assessed using bulk techniques that rely on averaging signal over large ensembles of unit cells, obscuring local heterogeneities, such as variations in CO 2 occupancy across individual nanocrystals. To resolve this limitation, we demonstrate a multimodal, nanoscale characterization of Mg 2 (dobpdc) appended with 1,3-diaminopropane. By employing recently developed characterization techniques at progressively smaller length scales, we uncover insights from correspondingly smaller populations of unit cells. First, we use parallel-beam 3D electron diffraction (3D ED) to identify a prominent expansion in lattice parameters upon desorption of CO 2 , as observed at the level of single nanocrystals. Second, we use convergent-probe 4D scanning transmission electron microscopy (4D-STEM) to quantify associated differences in lattice strain as a function of gas loading and diamine appending. These measurements sample small subvolumes within individual nanocrystals. Finally, we apply infrared scattering scanning near-field optical microscopy (IR s- SNOM) to confirm variable CO 2 chemisorption across adsorption sites at the surface of single nanocrystals. This multimodal, multiscale approach allows us to map heterogeneity within individual nanocrystals. Collectively, these findings emphasize the importance of local, nanoscale characterization of metal−organic frameworks in revealing previously unresolvable features that impact their performance.
The field-induced first-order phase transition in (Er{sub 1-x}Y{sub x})Co{sub 2} with the yttrium concentration x = 0.45 is observed to be accompanied by a butterflylike behavior and significant irreversibility of the specific heat. The coefficient {gamma} of the T-linear specific heat decreases by {approx}48% under application and removal of a magnetic field up to 20 kOe. This behavior is attributed to the itinerant electron metamagnetism of Co 3d electrons. The isothermal magnetic entropy change {Delta}S{sub m} in Er{sub 0.55}Y{sub 0.45}Co{sub 2} includes a large contribution associated with spin fluctuations induced by the f-d exchange interaction in the hybridized 3d-5d-electron subsystem. These spin fluctuations are suggested to contribute substantially to the magnetocaloric effect of the RCo{sub 2} type compounds. The maximal {Delta}S{sub m} value observed for ErCo{sub 2} just above the Curie temperature is ascribed to the closeness of the T{sub c} value to the spin-fluctuation temperature T{sub sf} of itinerant Co 3d electrons. The nonmonotonous change in {Delta}S{sub m} with the Curie temperature of R{sub 1-x}R{sub x}{prime}Co{sub 2} compounds is explained by the temperature variation in the spin-fluctuation contribution to the magnetocaloric effect.
Ceramic materials doped with magnetic ions that present emission in the visible and near-infrared spectral regions are very attractive due to their inherent tunability. Possible applications include their utilization as optoelectronic and display devices, as spintronic material, in signal transmission and information storage, in the fabrication of special papers, as dosimetric materials and room temperature solid state lasers. Materials doped with tetrahedrally coordinated Co{sup 2+} present wide bands originated from electronic transitions in the ionic unfilled 3d electronic shell. The Co{sup 2+} 3d electrons are outside of the ion core and therefore their optical properties are directly affected by static and dynamic properties of ligand anions. The magnesium gallate MgGa{sub 2}O{sub 4} is a partially inverted spinel described as a AB{sub 2}O{sub 4} material with two possible positions for A{sup 2+} and B{sup 3+} cations. Polycrystalline MgGa{sub 2}O{sub 4} : Co{sup 2+} samples were produced by solid-state reactions between ultra-pure raw oxides MgO, {beta}-Ga{sub 2}O{sub 3} and the desired CoCO{sub 3} quantities. Photoluminescence data at room temperature and 77 K of MgGa{sub 2}O{sub 4} polycrystalline samples doped with 0.1 and 1.0% of Co{sup 2+} are presented. The visible emission observed is attributed to the {sup 4}T{sub 1}({sup 4}P) {yields}{sup 4}A{sub 2}({sup 4}F) spin-allowed transition of Co{sup 2+} ions tetrahedrally coordinated by O{sup 2-} ions. The photoluminescence intensity decreases with temperature, but 90% of the 77 K emission integrated intensity remains at room temperature. Moreover, from lifetime results we estimate that Co{sup 2+} emission quantum efficiency is about 1.0 at room temperature. We also observe that between 0.1 and 1.0% of Co{sup 2+} the luminescence intensity decreases. For 1.0% of Co{sup 2+} the luminescence intensity is 37% of the obtained for 0.1%. This fact is attributed to non-radiative transfer processes of impurity ion relaxation that become competitive at 1.0% of Co{sup 2+} and show that there is a strongly impurity-concentration luminescence dependence. We also observed that for the higher concentration the band is slightly shifted to the infrared region. Due to low impurity ion concentration it would not be expected an energy transfer between Co{sup 2+} ions, therefore non-radiative decay processes are responsible by temperature luminescence quenching.
Recently, the integration of electronic elements with cellular scaffolds has brought forth the ability to monitor and control tissue function actively by using flexible free-standing two-dimensional (2D) systems. Capabilities for electrically probing complex, physicochemical and biological three-dimensional (3D) microenvironments demand, however, 3D electronic scaffolds with well-controlled geometries and functional-component distributions. This work presents the development of flexible 3D electronic scaffolds with precisely defined dimensions and microelectrode configurations formed using a process that relies on geometric transformation of 2D precursors by compressive buckling. It demonstrates a capability to fabricate these constructs in diverse 3D architectures and/or electrode distributions aimed at achieving an enhanced level of control and regulation of tissue function relatively to that of other approaches. In addition, this work presents the integration of these 3D electronic scaffolds within engineered 3D cardiac tissues, for monitoring of tissue function, controlling tissue contraction through electrical stimulation, and initiating on-demand, local release of drugs, each through well-defined volumetric spaces. These ideas provide opportunities in fields ranging from in vitro drug development to in vivo tissue repair and many others.
Abstract not provided
Purpose: To determine the dosimetric effect of 3D printed bolus in an anthropomorphic phantom. Methods: Conformable bolus material was generated for an anthropomorphic phantom from a DICOM volume. The bolus generated was a uniform expansion of 5mm applied to the nose region of the phantom, as this is a difficult area to uniformly apply bolus clinically. A Printrbot metal 3D Printer using PLA plastic generated the bolus. A 9MeV anterior beam with a 5cm cone was used to deliver dose to the nose of the phantom. TLD measurements were compared to predicted values at the phantom surface. Film planes were analyzed for the printed bolus, a standard 5mm bolus sheet placed on the phantom, and the phantom with no bolus applied to determine depth and dose distributions. Results: TLDs measured within 2.5% of predicted value for the 3D bolus. Film demonstrated a more uniform dose distribution in the nostril region for the 3d printed bolus than the standard bolus. This difference is caused by the air gap created around the nostrils by the standard bolus, creating a secondary build-up region. Both demonstrated a 50% central axis dose shift of 5mm relative to the no bolus film. HU for the bolus calculated the PLA electron density to be ∼1.1g/cc. Physical density was measured to be 1.3g/cc overall. Conclusion: 3D printed PLA bolus demonstrates improved dosimetric performance to standard bolus for electron beams with complex phantom geometry.
K{alpha}-to-K{beta} x-ray intensity ratios of Ti and Co in pure metals and in alloys of Ti{sub x}Co{sub 1-x} (x=0.7, 0.6, 0.5, 0.4, and 0.3) have been measured for understanding the charge-transfer and delocalization phenomena in the Ti{sub x}Co{sub 1-x} alloys using the energy-dispersive x-ray fluorescence technique. The valence-electron structure of Ti and Co in the samples have been evaluated by the comparison of the measured K{alpha}-to-K{beta} x-ray intensity ratios with the results of multiconfiguration Dirac-Fock calculations for various electron structures of these metals. Significant changes in the 3d electron population (with respect to the pure metal) are observed for Ti and Co in different alloy compositions. Our analysis indicates that these changes can be explained by assuming the transfer of 3d electrons from one element to the other element (charge transfer) and/or the rearrangement of electrons between 3d and 4s,4p states (delocalization) of the individual metal atoms.
One-dimensional ladder-type nonfullerene electron acceptors (NFAs) with large fused ring cores have been typically used in highly efficient organic solar cells (OSCs). Prior studies have demonstrated that small molecule acceptors with three-dimensional (3D) structures may exhibit low energy loss, and hence can lead to improved OSC performance. In this study, a new 3D NFA ( 99CZ-8F ) with a 9,9'-bicarbazole backbone was designed, synthesized, and characterized, where two linear A-D-A architectures were linked by a single N–N bond. 99CZ-8F showed strong absorption in the range of 500–800 nm in the solid state, which is complementary to the absorption of the donor material PM6 . After regulating the morphology of the active layer via binary solvent mixture, the optimized device exhibited a maximum power conversion efficiency (PCE) of 6.6 ± 0.1%, which is among the best reported values for 3D nonfullerene electron acceptor based OSCs
DNA-based self-assembly methods have demonstrated powerful and unique capabilities to encode nanomaterial structures through the prescribed placement of inorganic and biological nanocomponents. However, the challenge of selectively growing DNA superlattices on specific locations of surfaces and their integration with conventional nanofabrication has hindered the fabrication of three-dimensional (3D) DNA-assembled functional devices. Here, we present a scalable nanofabrication technique that combines bottom-up and top-down approaches for selective growth of 3D DNA superlattices on gold microarrays. This approach allows for the fabrication of self-assembled 3D-nanostructured electronic devices. DNA strands are bound onto the gold arrays, which anchor DNA origami frames and promote ordered framework growth on the specific areas of the surface, enabling control of the lateral placement and orientation of superlattices. DNA frameworks selectively grown on the pads are subsequently templated to nanoscale silica and tin oxide (SnO x ) that follow the architecture, as confirmed by structural and chemical characterizations. The fabricated SnO x superlattices are integrated into devices that demonstrate photocurrent response.
Purpose: To appreciate the difference of electron dose distributions calculated from the Monte Carlo and Electron 3D algorithms of radiotherapy in a heterogeneous phantom. Methods: A phantom consisted of two different materials (lungs mimicked by low-density cork and others by polystyrene) with an 11x16 cm field size (SSD = 100 cm) was utilized to estimate the two-dimensional dose distributions under 6 and 18 MeV beams. On behalf of two different types of tissue, the heterogeneous phantom was comprised of 3 identical slabs in the longitudinal direction with a thickness of 1 cm for each slab and 2 with a thickness of 2.5 cm. The Monte Carlo/MCTP application package constituted of five codes was performed to simulate the electron beams of a Varian Clinac 23IX. A 20x20 cm2 type III (open walled) applicator was used in these simulations. It has been shown elsewhere that the agreement of the phase space data between the calculation results of MCTP application package and the measured data were within 2% on depth-dose and transverse profiles, as well as output factor calculations. The electron 3D algorithm owned by Pinnacle 8.0m and the MCTP application package were applied for the two-dimensional dose distributions calculation. The curves at 50% and 100%-prescribed dose were observed for 6 and 18 MeV beams, respectively. Results: The MC calculations results were compared with the electron 3D calculations in terms of two-dimensional dose distributions for 6 and 18 MeV beams showed excellent agreement except in distal boundary where it was the very junction of the high and low-density region. Conclusions: The Monte Carlo/MCTP method could be used to better reflect the dose variation caused by heterogeneous tissues. Conclusion: A case study showed that the Monte Carlo/MCTP method could be used to better reflect the dose variation caused by heterogeneous tissues.
The B-site ordered double perovskite oxides LaPbMSbO{sub 6} (M=Co, Ni) have been synthesized via the modified Sol–Gel precursor two-step route. Rietveld refinements reveal strong abnormal structural distortion and BO{sub 6} octahedral deformation appearing along the ab plane. Owing to the cooperative Jahn–Teller effect of Co{sup 2+} and Pb{sup 2+} ions, the Co-related compound exhibits almost complete Co{sup 2+}–Sb{sup 5+} order. For magnetic properties, spin-canted antiferromagnetic state with high extent of magnetic frustration is confirmed. The Ni-related compound presents heavier magnetic frustration for introducing tiny disorder on site occupation accompanied with valence state and further enhancing the complexity of magnetic competition. Dielectric measurements present a considerable temperature dependent dielectric relaxation with great dc-like loss feature in the LaPbCoSbO{sub 6}. For LaPbNiSbO{sub 6}, however, the permittivity with low dielectric loss is shown to be insensitive to either temperature or frequency. The corresponding electronic active energy manifests that the weakly bounded 3d-electron is prone to hop in a more distorted Co–Sb sublattice. - Graphical abstract: XRD Rietveld refinement result of LaPbCoSbO{sub 6} presented a large BO{sub 6} octahedral distortion along the ab plane. Based upon the variations from Co–O–Sb bond angles, a fierce competition from many extended magnetic coupling routes (M–O–O–M) would induce a considerably large magnetic frustration and electron hopping restriction. - Highlights: • Highly ordered LaPbMSbO{sub 6} (M=Co, Ni) were synthesized. • Abnormal structural distortion appeared in the ab plane. • Strong magnetic frustration was confirmed via M{sup 2+}–O–O–M{sup 2+} route. • Dielectric measurements presented a large difference between Co and Ni samples. • 3d-electronic structure determines lattice distortion and physical properties.
The true molecular conformation and the crystal structure of benzo[e]dinaphtho[2,3-a;1',2',3',4'-ghi]fluoranthene, 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene and 7,16-diphenylnaphtho[1,2,3,4-cde]helianthrene were determined ab initio by 3D electron diffraction. All three molecules are remarkable polycyclic aromatic hydrocarbons. The molecular conformation of two of these compounds could not be determined via classical spectroscopic methods due to the large size of the molecule and the occurrence of multiple and reciprocally connected aromatic rings. The molecular structure of the third molecule was previously considered provisional. These compounds were isolated as by-products in the synthesis of similar products and were at the same time nanocrystalline and available only in very limited amounts. 3D electron diffraction data, taken from submicrometric single crystals, allowed for direct ab initio structure solution and the unbiased determination of the internal molecular conformation. Detailed synthetic routes and spectroscopic analyses are also discussed. Based on many-body perturbation theory simulations, benzo[e]dinaphtho[2,3-a;1',2',3',4'-ghi]fluoranthene may be a promising candidate for triplet–triplet annihilation and 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene may be a promising candidate for intermolecular singlet fission in the solid state.
The critical component enabling electron cyclotron emission imaging (ECEI) and microwave imaging reflectometry (MIR) to resolve 2D and 3D electron temperature and density perturbations is the heterodyne imaging array that collects and downconverts radiated emission and/or reflected signals (50–150 GHz) to an intermediate frequency (IF) band (e.g. 0.1–18 GHz) that can be transmitted by a shielded coaxial cable for further filtering and detection. New circuitry has been developed for this task, integrating gallium arsenide (GaAs) monolithic microwave integrated circuits (MMICs) mounted on a liquid crystal polymer (LCP) substrate. The improved topology significantly increases electromagnetic shielding from out-of-band interference, leads to 10× improvement in the signal-to-noise ratio, and dramatic cost savings through integration. The current design, optimized for reflectometry and edge radiometry on mid-sized tokamaks, has demonstrated >20 dB conversion gain in upper V-band (60-75 GHz). Implementation of the circuit in a multi-channel electron cyclotron emission imaging (ECEI) array will improve the diagnosis of edge-localized modes and fluctuations of the high-confinement, or H-mode, pedestal.
In the study of microband formation during plastic deformation of face centered cubic metals and alloys, two theories have been proposed regarding the orientations of their boundaries: (i) they are aligned parallel to crystallographic planes associated with dislocation glide (i.e. (111) planes in FCC metals), or (ii) they are aligned in accordance with the macroscopic stress state generated during deformation. In this study, high resolution 3D electron backscatter diffraction (3D EBSD) was used to investigate the morphology and crystallographic nature of microband boundaries within a 19 × 9 × 8.6 μm volume of a deformed grain in commercial purity aluminum cold rolled to 22% reduction. It was found that microband boundaries correspond to both theories of orientation. Additionally, a single surface may contain both crystallographic and non-crystallographic alignments. Misorientations across boundaries in the regions of microband triple junctions have been identified for both boundary alignments. - Highlights: ► Reconstruction of a 3D volume of crystallographic orientations from EBSD data ► Subgrain features accurately reconstructed using specially designed strategies. ► Microband boundaries contain crystallographic and non-crystallographic alignments. ► Boundaries form by crystallographic process but rotate to non-crystallographic.