SEARCH · Search NASA

Results for “6-dof”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Space station docking mechanism dynamic testing

A prototype docking mechanism for the Space Station was designed and fabricated for NASA. This docking mechanism is actively controlled and uses a set of electromechanical actuators for alignment and load attenuation. Dynamic tests are planned using the Marshall Space Flight Center's 6-DOF Motion Simulator. The proposed tests call for basic functionality verification as well as complete hardware-in-the-loop docking dynamics simulations.

Howsman, Thomas G.↗

NASA NTRS1989

Design and implementation of a multi-sensor robot system for printed circuit board insertion

The design and implementation of a robot system equipped with multiple sensors are described. The robotic assembly system couples the task sequence of the robot with information from different sensors, enabling the system to handle uncertainties encountered during task execution. The target task involves the insertion of a printed circuit board into a card cage. The sensors used are an overhead three-dimensional vision system, a fingertip cross-fire sensor, and a 6-DOF force/torque sensor. The vision system is used to locate the printed circuit boards and the insertion slots. Information provided by the cross-fire sensor is used to complement the information from the vision system in order to obtain a proper grasping location on the printed circuit board. A fuzzy-logic-based system is used to interpret the forces and torques generated by the force/torque sensor during the insertion process. The repeated success of this assembly task over many experimental trials verifies the modeling and controller assumptions.

Sood, Deepak↗

NASA NTRS1989

A method for estimating the mass properties of a manipulator by measuring the reaction moments at its base

Emulating on earth the weightlessness of a manipulator floating in space requires knowledge of the manipulator's mass properties. A method for calculating these properties by measuring the reaction forces and moments at the base of the manipulator is described. A manipulator is mounted on a 6-DOF sensor, and the reaction forces and moments at its base are measured for different positions of the links as well as for different orientations of its base. A procedure is developed to calculate from these measurements some combinations of the mass properties. The mass properties identified are not sufficiently complete for computed torque and other dynamic control techniques, but do allow compensation for the gravitational load on the links, and for simulation of weightless conditions on a space emulator. The algorithm has been experimentally demonstrated on a PUMA 260 and used to measure the independent combinations of the 16 mass parameters of the base and three proximal links.

West, Harry↗

NASA NTRS1989

Crew emergency return vehicle autoland feasibility study

The crew emergency return vehicle (CERV) autoland feasibility study focused on determining the controllability of the NASA Langley high lift over drag CERV for performing an automatic landing at a prescribed runway. An autoland system was developed using integral linear quadratic Gaussian (LQG) design techniques. The design was verified using a nonlinear 6 DOF simulation. Simulation results demonstrate that the CERV configuration is a very flyable configuration for performing an autoland mission. Adequate stability and control was demonstrated for wind turbulence and wind shear. Control surface actuator requirements were developed.

Bossi, J. A.↗

NASA NTRS1989

Time and frequency-domain identification and verification of BO-105 dynamic models

Mathematical models for the dynamics of the DLR BO 105 helicopter are extracted from flight test data using two different approaches: frequency-domain and time-domain identification. Both approaches are reviewed. Results from an extensive data consistency analysis are given. Identifications for 6 degrees of freedom (DOF) rigid body models are presented and compared in detail. The extracted models compare favorably and their prediction capability is demonstrated in verification results. Approaches to extend the 6 DOF models are addressed and first results are presented. System identification is broadly defined as the deduction of system characteristics from measured data. It provides the only possibility to extract both non-parametric (e.g., frequency responses) and parametric (e.g., state space matrices) aircraft models from flight test data and therefore gives a reliable characterization of the dynamics of the actually existing aircraft. Main applications of system identification are seen in areas where higher accuracies of the mathematical models are required: Simulation validation, control system design (in particular model-following control system design for in-flight simulation), and handling qualities.

Kaletka, Juergen↗

NASA NTRS1990

Development of a multipurpose hand controller for JEMRMS

A prototype multipurpose hand controller for the JEMRMS (Japanese Experiment Module Remote Manipulator System) was developed. The hand controller (H/C) is an orthogonal type, with 6 degrees of freedom (DOF) and small size. The orthogonal type H/C is very simple for coordinate transformations and can easily control any type of manipulators. In fact, the JEMRMS is planned to have two manipulators controlled by a common H/C at this stage. The H/C was able to be used as a rate control joystick and a force reflection master arm, using an experimental 6 DOF manipulator. Good maneuverability was confirmed in the verification test. The orthogonal type H/C is suitable for use as a common H/C for the two manipulators of the JEMRMS.

Matsuhira, Nobuto↗

NASA NTRS1990

A new six-degree-of-freedom force-reflecting hand controller for space telerobotics

A new 6 degree of freedom universal Force Reflecting Hand Controller (FRHC) was designed for use as the man-machine interface in teleoperated and telerobotic flight systems. The features of this new design include highly intuitive operation, excellent kinesthetic feedback, high fidelity force/torque feedback, a kinematically simple structure, mechanically decoupled motion in all 6 DOF, good back-drivability, and zero backlash. In addition, the new design has a much larger work envelope, smaller stowage volume, greater stiffness and responsiveness, and better overlap of the human operator's range of motion than do previous designs. The utility and basic operation of a new, flight prototype FRHC called the Model X is briefly discussed. The design heritage, general design goals, and design implementation of this advanced new generation of FRHCs are presented, followed by a discussion of basic features and the results of initial testing.

Mcaffee, Douglas↗

NASA NTRS1989

The Goddard Space Flight Center (GSFC) robotics technology testbed

Much of the technology planned for use in NASA's Flight Telerobotic Servicer (FTS) and the Demonstration Test Flight (DTF) is relatively new and untested. To provide the answers needed to design safe, reliable, and fully functional robotics for flight, NASA/GSFC is developing a robotics technology testbed for research of issues such as zero-g robot control, dual arm teleoperation, simulations, and hierarchical control using a high level programming language. The testbed will be used to investigate these high risk technologies required for the FTS and DTF projects. The robotics technology testbed is centered around the dual arm teleoperation of a pair of 7 degree-of-freedom (DOF) manipulators, each with their own 6-DOF mini-master hand controllers. Several levels of safety are implemented using the control processor, a separate watchdog computer, and other low level features. High speed input/output ports allow the control processor to interface to a simulation workstation: all or part of the testbed hardware can be used in real time dynamic simulation of the testbed operations, allowing a quick and safe means for testing new control strategies. The NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) hierarchical control scheme, is being used as the reference standard for system design. All software developed for the testbed, excluding some of simulation workstation software, is being developed in Ada. The testbed is being developed in phases. The first phase, which is nearing completion, and highlights future developments is described.

Schnurr, Rick↗

NASA NTRS1989

Redundancy in sensors, control and planning of a robotic system for space telerobotics

The analysis and development of a manipulator redundant in structure and sensor devices controlled by a distributed multiprocessor architecture are discussed. The goal has been the realization of a modular structure of the manipulator with evident aspects of flexibility and transportability. The distributed control structure, thanks to his modularity and flexibility could be integrated in the future into an operative structure aimed to space telerobotics. The architecture is applied to the 6 DOF manipulator Gilberto.

Rovetta, A.↗

NASA NTRS1990

Navigation systems requirement analysis for the Aeroassist Flight Experiment (AFE)

Navigation requirements for Aeroassist Flight Experiment (AFE) spacecraft passing through the earth's atmosphere have been studied using a 6-DOF dynamics model, an Inertial Measurement Unit model, a baseline AFE aeropass flight guidance logic, and a baseline AFE aeropass control model. The goal of this study is to determine, in a statistical sense, how much flight path angle error can be tolerated at Entry Interface (EI) and still have acceptable delta-V requirements at exit to position the AFE spacecraft for recovery. Assuming there is fuel available to produce 370 ft/sec of delta-V at atmospheric exit, a 3-sigma standard deviation in flight path angle error of 0.04 degree at EI would result in a 98 percent probability of mission success. In addition to the required delta-V at exit, other aeropass parameters such as maximum aeroheating rate, fuel consumption, and the science requirements affecting mission success are also investigated.

Huang, K. H.↗

NASA NTRS1990

Cartesian-based control of a deformable robot manipulator

A control scheme for the 6-DOF Cincinnati-Milacron T3 robot arm is developed and demonstrated by means of numerical simulations. The arm is modeled as an open-loop articulated system with both actuators and position and velocity sensors at each joint, and a Cartesian-frame control algorithm is constructed in which (1) an adaptive scheme decouples the end-effector subsystem from the complex highly nonlinear main system and (2) a servo scheme drives the reduced system to follow a presumed end-effector trajectory on the basis of the Cartesian-frame feedback gains. The velocity transformation used to transfer the control forces from the Cartesian frame to joint-based space is explained, and the simulation results are presented in extensive graphs and diagrams. The control is found to respond well to system-topology changes and robot-environment impacts.

Chang, C. W.↗

NASA NTRS1990

An analytical study of a six degree-of-freedom active truss for use in vibration control

An analytical study of the vibration control capabilities of three configurations of an active truss is presented. The truss studied is composed of two bays of an octahedral-octahedral configuration. The three configurations of the active truss studies are: all six battens activated (6 DOF), the top three battens activated (3 DOF), and the bottom three battens activated (3 DOF). The closed-loop vibration control response of these three configurations are studied with respect to: vibration attenuation, energy utilized, and the effects of motor drive amplifier saturation non-linearities.

Wynn, Robert H., Jr.↗

NASA NTRS1990

Estimating short-period dynamics using an extended Kalman filter

An extended Kalman filter is used to estimate the parameters of a low-order model from aircraft transient response data. The low-order model is a state-space model derived from the short-period approximation of the longitudinal aircraft dynamics. The model corresponds to the pitch rate to stick force transfer function currently used in flying qualities analysis. The parameters are estimated from flight data as well as from a 6-DOF nonlinear simulation of the aircraft. These two estimates are then compared, and the discrepancies noted. The low-order model is able to satisfactorily match both flight data and simulation data from a high-order computer simulation.

Bauer, Jeffrey E.↗

NASA NTRS1990

Nonlinear feedback control for high alpha flight

Analytical aerodynamic models are derived from a high alpha 6 DOF wind tunnel model. One detail model requires some interpolation between nonlinear functions of alpha. One analytical model requires no interpolation and as such is a completely continuous model. Flight path optimization is conducted on the basic maneuvers: half-loop, 90 degree pitch-up, and level turn. The optimal control analysis uses the derived analytical model in the equations of motion and is based on both moment and force equations. The maximum principle solution for the half-loop is poststall trajectory performing the half-loop in 13.6 seconds. The agility induced by thrust vectoring capability provided a minimum effect on reducing the maneuver time. By means of thrust vectoring control the 90 degrees pitch-up maneuver can be executed in a small place over a short time interval. The agility capability of thrust vectoring is quite beneficial for pitch-up maneuvers. The level turn results are based currently on only outer layer solutions of singular perturbation. Poststall solutions provide high turn rates but generate higher losses of energy than that of classical sustained solutions.

Stalford, Harold↗

NASA NTRS1990

Analytical aerodynamic model of a high alpha research vehicle wind-tunnel model

A 6 DOF analytical aerodynamic model of a high alpha research vehicle is derived. The derivation is based on wind-tunnel model data valid in the altitude-Mach flight envelope centered at 15,000 ft altitude and 0.6 Mach number with Mach range between 0.3 and 0.9. The analytical models of the aerodynamics coefficients are nonlinear functions of alpha with all control variable and other states fixed. Interpolation is required between the parameterized nonlinear functions. The lift and pitching moment coefficients have unsteady flow parts due to the time range of change of angle-of-attack (alpha dot). The analytical models are plotted and compared with their corresponding wind-tunnel data. Piloted simulated maneuvers of the wind-tunnel model are used to evaluate the analytical model. The maneuvers considered are pitch-ups, 360 degree loaded and unloaded rolls, turn reversals, split S's, and level turns. The evaluation finds that (1) the analytical model is a good representation at Mach 0.6, (2) the longitudinal part is good for the Mach range 0.3 to 0.9, and (3) the lateral part is good for Mach numbers between 0.6 and 0.9. The computer simulations show that the storage requirement of the analytical model is about one tenth that of the wind-tunnel model and it runs twice as fast.

Cao, Jichang↗

NASA NTRS1991

Personnel launch system autoland development study

The Personnel Launch System (PLS) Autoland Development Study focused on development of the guidance and control system for the approach and landing (A/L) phase and the terminal area energy management (TAEM) phase. In the A/L phase, a straight-in trajectory profile was developed with an initial high glide slope, a pull-up and flare to lower glide slope, and the final flare touchdown. The TAEM system consisted of using a heading alignment cone spiral profile. The PLS autopilot was developed using integral LQG design techniques. The guidance and control design was verified using a nonlinear 6 DOF simulation. Simulation results demonstrated accurate steering during the TAEM phase and adequate autoland performance in the presence of wind turbulence and wind shear.

Bossi, J. A.↗

NASA NTRS1991

Experimental study of trajectory planning and control of a high precision robot manipulator

The kinematic and trajectory planning is presented for a 6 DOF end-effector whose design was based on the Stewart Platform mechanism. The end-effector was used as a testbed for studying robotic assembly of NASA hardware with passive compliance. Vector analysis was employed to derive a closed-form solution for the end-effector inverse kinematic transformation. A computationally efficient numerical solution was obtained for the end-effector forward kinematic transformation using Newton-Raphson method. Three trajectory planning schemes, two for fine motion and one for gross motion, were developed for the end-effector. Experiments conducted to evaluate the performance of the trajectory planning schemes showed excellent tracking quality with minimal errors. Current activities focus on implementing the developed trajectory planning schemes on mating and demating space-rated connectors and using the compliant platform to acquire forces/torques applied on the end-effector during the assembly task.

Nguyen, Charles C.↗

NASA NTRS1990

Statistical analysis of AFE GN&C aeropass performance

Performance of the guidance, navigation, and control (GN&C) system used on the Aeroassist Flight Experiment (AFE) spacecraft has been studied with Monte Carlo techniques. The performance of the AFE GN&C is investigated with a 6-DOF numerical dynamic model which includes a Global Reference Atmospheric Model (GRAM) and a gravitational model with oblateness corrections. The study considers all the uncertainties due to the environment and the system itself. In the AFE's aeropass phase, perturbations on the system performance are caused by an error space which has over 20 dimensions of the correlated/uncorrelated error sources. The goal of this study is to determine, in a statistical sense, how much flight path angle error can be tolerated at entry interface (EI) and still have acceptable delta-V capability at exit to position the AFE spacecraft for recovery. Assuming there is fuel available to produce 380 ft/sec of delta-V at atmospheric exit, a 3-sigma standard deviation in flight path angle error of 0.04 degrees at EI would result in a 98-percent probability of mission success.

Chang, Ho-Pen↗