Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACTINOMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Optical emission diagnostics with electric probe measurements of inductively coupled Ar/O{sub 2}/Ar-O{sub 2} plasmas

Physical properties of low-pressure inductively coupled argon, oxygen, and Ar-O{sub 2} mixture plasmas are investigated using optical emission spectroscopy (OES) combined with an rf-compensated Langmuir probe measurement. In each gas discharge, the electron density and the electron temperature were obtained by using the probe. The electron temperature was also obtained by OES models and compared with that measured by the probe. The electron temperature was observed to decrease with increasing power and pressure and also observed to decrease with increasing Ar content. Argon metastable densities were calculated based on an optical transition model. In Ar-O{sub 2} discharges, the dissociation fraction of O{sub 2} molecules was estimated using optical emission actinometry. The dissociation fraction was observed to increase with increasing power and Ar content.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantitative determination of mass-resolved ion densities in H{sub 2}-Ar inductively coupled radio frequency plasmas

Inductively coupled H{sub 2}-Ar plasmas are characterized by an energy-dispersive mass spectrometer (plasma monitor), a retarding field analyzer, optical emission spectroscopy, and a Langmuir probe. A procedure is presented that allows determining quantitatively the absolute ion densities of Ar{sup +}, H{sup +}, H{sub 2}{sup +}, H{sub 3}{sup +}, and ArH{sup +} from the plasma monitor raw signals. The calibration procedure considers the energy and mass-dependent transmission of the plasma monitor. It is shown that an additional diagnostic like a Langmuir probe or a retarding field analyzer is necessary to derive absolute fluxes with the plasma monitor. The conversion from fluxes into densities is based on a sheath and density profile model. Measurements were conducted for a total gas pressure of 1.0 Pa. For pure H{sub 2} plasmas, the dominant ion is H{sub 3}{sup +}. For mixed H{sub 2}-Ar plasmas, the ArH{sup +} molecular ion is the most dominant ion species in a wide parameter range. The electron density, n{sub e}, is around 3 Multiplication-Sign 10{sup 16} m{sup -3} and the electron temperature, T{sub e}, decreases from 5 to 3 eV with increasing Ar content. The dissociation degree was measured by actinometry. It is around 1.7% nearly independent on Ar content. The gas temperature, estimated by the rotational distribution of the Q-branch lines of the H{sub 2} Fulcher-{alpha} diagonal band (v Prime =v Double-Prime =2) is estimated to (540 {+-} 50) K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical emission spectroscopy and Langmuir probe diagnostics of CH{sub 3}F/O{sub 2} inductively coupled plasmas

A CH{sub 3}F:O{sub 2} (50%:50%) inductively coupled discharge, sustained in a compact plasma reactor, was investigated as a function of power (20-400 W) and pressure (9-30 mTorr), using optical emission spectroscopy and Langmuir probe measurements. The electron density increased linearly with power but only weakly with pressure. The effective electron temperature was nearly independent of power and pressure. The gas temperature, obtained from the rotational structure of N{sub 2} (C {yields} B) optical emission, increased from 400 to 900 K as a function of inductive mode power between 75 and 400 W at 10 mTorr. For constant feed gas flow, the absolute H, F, and O atom densities, estimated by optical emission rare gas actinometry, increased linearly with power. The absolute number density ratios H/Ar, F/Ar, and O/Ar, increased, decreased, and remained constant, respectively, with pressure. The H-atom density was estimated to be 5.4 Multiplication-Sign 10{sup 13} cm{sup -3} at 400 W and 10 mTorr (gas temperature = 900 K), implying a high degree of dissociation of the CH{sub 3}F feedstock gas. The F and O atom number densities were much lower (8.3 Multiplication-Sign 10{sup 12} cm{sup -3} and 5.9 Multiplication-Sign 10{sup 12} cm{sup -3}, respectively) for the same conditions, suggesting that most of the fluorine and oxygen is contained in reaction products HF, CO, CO{sub 2}, H{sub 2}O, and OH. The relative number densities of HF, CO, and CO{sub 2} were observed to first rapidly increase with power, and then reach a plateau or decay slightly at higher power. Reaction mechanisms were proposed to explain the observed behavior of the number density of F and HF vs. power and pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopy diagnostic of dual-frequency capacitively coupled CHF{sub 3}/Ar plasma

A combined spectroscopic method of absorption, actinometry, and relative optical emission intensity is employed to determine the absolute CF{sub 2} density, the relative F and H densities, H atom excitation temperature and the electron density in dual-frequency (60/2 MHz) capacitively coupled CHF{sub 3}/Ar plasmas. The effects of different control parameters, such as high-frequency (HF) power, low-frequency (LF) power, gas pressure, gap length and content of CHF{sub 3}, on the concentration of radical CF{sub 2}, F, and H and excitation temperature are discussed, respectively. It is found that the concentration of CF{sub 2} is strongly dependent on the HF power, operating pressure and the proportion of CHF{sub 3} in feed gas, while it is almost independent of the LF power and the gap length. A higher concentration ratio of F to CF{sub 2} could be obtained in dual-frequency discharge case. Finally, the generation and decay mechanisms of CF{sub 2} and F were also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic analysis of H{sub 2}/CH{sub 4} microwave plasma and fast growth rate of diamond single crystal

One of the best ways to increase the diamond growth rate is to couple high microwave power to the plasma. Indeed, increasing the power density leads to increase gas temperature the atomic hydrogen density in the plasma bulk, and to produce more hydrogen and methyl at the diamond surface. Experimental and numerical approaches were used to study the microwave plasma under high power densities conditions. Gas temperature was measured by optical emission spectroscopy and H-atom density using actinometry. CH{sub 3}-radical density was obtained using a 1D model that describes temperatures and plasma composition from the substrate to the top of the reactor. The results show that gas temperature in the plasma bulk, atomic hydrogen, and methyl densities at the diamond surface highly increase with the power density. As a consequence, measurements have shown that diamond growth rate also increases. At very high power density, we measured a growth rate of 40 μm/h with an H-atom density of 5 × 10{sup 17} cm{sup −3} which corresponds to a H{sub 2} dissociation rate higher than 50%. Finally, we have shown that the growth rate can be framed between a lower and an upper limit as a function depending only on the maximum of H-atom density measured or calculated in the plasma bulk. The results also demonstrated that increasing fresh CH{sub 4} by an appropriate injection into the boundary layer is a potential way to increase the diamond growth rates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface loss probability of atomic hydrogen for different electrode cover materials investigated in H₂-Ar low-pressure plasmas

In an inductively coupled H₂-Ar plasma at a total pressure of 1.5 Pa, the influence of the electrode cover material on selected line intensities of H, H₂, and Ar are determined by optical emission spectroscopy and actinometry for the electrode cover materials stainless steel, copper, tungsten, Macor{sup ®}, and aluminum. Hydrogen dissociation degrees for the considered conditions are determined experimentally from the measured emission intensity ratios. The surface loss probability β{sub H} of atomic hydrogen is correlated with the measured line intensities, and β{sub H} values are determined for the considered materials. Without the knowledge of the atomic hydrogen temperature, β{sub H} cannot be determined exactly. However, ratios of β{sub H} values for different surface materials are in first order approximation independent of the atomic hydrogen temperature. Our results show that β{sub H} of copper is equal to the value of stainless steel, β{sub H} of Macor{sup ®} and tungsten is about 2 times smaller and β{sub H} of aluminum about 5 times smaller compared with stainless steel. The latter ratio is in reasonable agreement with literature. The influence of the atomic hydrogen temperature T{sub H} on the absolute value is thoroughly discussed. For our assumption of T{sub H}=600 K, we determine a β{sub H} for stainless steel of 0.39±0.13.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of neutral gas temperature in a 13.56 MHz inductively coupled plasma

Measuring the temperature of neutrals in inductively coupled plasmas (ICP) is important as heating of neutral particles will influence plasma characteristics such as the spatial distributions of plasma density and electron temperature. Neutral gas temperatures were deduced using a non-invasive technique that combines gas actinometry, optical emission spectroscopy and simulation which is described here. Argon gas temperature in a 13.56 MHz ICP were found to fall within the range of 500 − 800 K for input power of 140 − 200 W and pressure of 0.05 − 0.2 mbar. Comparing spectrometers with 0.2 nm and 0.5 nm resolution, improved fitting sensitivity was observed for the 0.2 nm resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array

Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O 2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 10 16 cm -3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O 2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of fluorocarbon plasma in 60 and 100 MHz capacitively coupled discharges using mass spectrometry

The signals of positive ions and radicals formed in the fluorocarbon plasma of the capacitively coupled plasma reactor were measured using a quadrupole mass spectrometry and optical emission actinometry. The plasma was produced at 60 and 100 MHz frequencies for the same reactor configuration and gas mixtures. Experiments were performed at 25 mTorr with a SiO{sub 2} wafer on the grounded electrode. Mass spectra of ions were measured in C{sub 4}F{sub 8}/O{sub 2}/Ar and C{sub 4}F{sub 6}/O{sub 2}/Ar gas mixtures at 500-1500 W generator powers. For 60 and 100 MHz discharges production of fluorocarbon ions and radicals is discussed. It was found that the production of heavy species increases with frequency. The high mass signals such as C{sub 3}F{sub 3}{sup +}, C{sub 2}F{sub 4}{sup +}, C{sub 2}F{sub 5}{sup +}, C{sub 3}F{sub 5}{sup +}, C{sub 4}F{sub 7}{sup +} decrease when CHF{sub 3} is added to the gas mixture. However, the signals of CF{sub x}{sup +} (x=1,2,3) do not change significantly. These results are compared to the results of polymer film deposition on the wafer. It was suggested to control the polymerization film formation by adding small amount of CHF{sub 3} to the process mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface loss rates of H and Cl radicals in an inductively coupled plasma etcher derived from time-resolved electron density and optical emission measurements

A study is undertaken of the loss kinetics of H and Cl atoms in an inductively coupled plasma (ICP) reactor used for the etching of III-V semiconductor materials. A time-resolved optical emission spectroscopy technique, also referred to as pulsed induced fluorescence (PIF), has been combined with time-resolved microwave hairpin probe measurements of the electron density in a pulsed Cl{sub 2}/H{sub 2}-based discharge for this purpose. The surface loss rate of H, k{sub w}{sup H}, was measured in H{sub 2} plasma and was found to lie in the 125-500 s{sup -1} range ({gamma}{sub H} surface recombination coefficient of {approx}0.006-0.023), depending on the reactor walls conditioning. The PIF technique was then evaluated for the derivation of k{sub w}{sup Cl}, and {gamma}{sub Cl} in Cl{sub 2}-based plasmas. In contrast to H{sub 2} plasma, significant variations in the electron density may occur over the millisecond time scale corresponding to Cl{sub 2} dissociation at the rising edge of the plasma pulse. By comparing the temporal evolution of the electron density and the Ar-line intensity curves with 10% of Ar added in the discharge, the authors show that a time-resolved actinometry procedure using Ar as an actinometer is valid at low to moderate ICP powers to estimate the Cl loss rate. They measured a Cl loss rate of {approx}125-200 s{sup -1} (0.03{<=}{gamma}{sub Cl}{<=}0.06) at 150 W ICP power for a reactor state close to etching conditions. The Cl surface loss rate was also estimated for high ICP power (800 W) following the same procedure, giving a value of {approx}130-150 s{sup -1} ({gamma}{sub Cl}{approx}0.04), which is close to that measured at 150 W ICP power.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurements of sputtered neutrals and ions and investigation of their roles on the plasma properties during rf magnetron sputtering of Zn and ZnO targets

Langmuir probe and optical absorption spectroscopy measurements were used to determine the line-integrated electron density, electron temperature, and number density of Ar atoms in metastable {sup 3}P{sub 2} and {sup 3}P{sub 0} levels in a 5 mTorr, rf magnetron sputtering plasmas used for the deposition of ZnO-based thin films. While the average electron energy and density of Ar atoms in {sup 3}P{sub 2} and {sup 3}P{sub 0} excited states were fairly independent of self-bias voltage, the Ar {sup 3}P{sub 2}-to-electron number density ratio decreased by approximately a factor of 5 when going from −115 V to −300 V. This decrease was correlated to an increase by about one order of magnitude of the number density of sputtered Zn atoms determined by absolute actinometry measurements on Zn I using either Ar or Xe as the actinometer gas. These results were also found to be in excellent agreement with the predictions of a global model accounting for Penning ionization of sputtered Zn particles. The importance of the latter reactions was further confirmed by plasma sampling mass spectrometry showing a double peak structure for Zn ions: a low-energy component ascribed to thermalized ions created in the gas phase (by direct electron impact and by Penning ionization) and a high-energy tail due to ions ejected from the target and reaching quasi-collisionlessly the substrate surface.

36 MATERIALS SCIENCE↗

Determination of the number density of excited and ground Zn atoms during rf magnetron sputtering of ZnO target

A combination of optical absorption spectroscopy (OAS) and optical emission spectroscopy measurements was used to monitor the number density of Zn atoms in excited 4s4p ({sup 3}P{sub 2} and {sup 3}P{sub 0}) metastable states as well as in ground 4s{sup 2} ({sup 1}S{sub 0}) state in a 5 mTorr Ar radio-frequency (RF) magnetron sputtering plasma used for the deposition of ZnO-based thin films. OAS measurements revealed an increase by about one order of magnitude of Zn {sup 3}P{sub 2} and {sup 3}P{sub 0} metastable atoms by varying the self-bias voltage on the ZnO target from −115 to −300 V. Over the whole range of experimental conditions investigated, the triplet-to-singlet metastable density ratio was 5 ± 1, which matches the statistical weight ratio of these states in Boltzmann equilibrium. Construction of a Boltzmann plot using all Zn I emission lines in the 200–500 nm revealed a constant excitation temperature of 0.33 ± 0.04 eV. In combination with measured populations of Zn {sup 3}P{sub 2} and {sup 3}P{sub 0} metastable atoms, this temperature was used to extrapolate the absolute number density of ground state Zn atoms. The results were found to be in excellent agreement with those obtained previously by actinometry on Zn atoms using Ar as the actinometer gas [L. Maaloul and L. Stafford, J. Vac. Sci. Technol., A 31, 061306 (2013)]. This set of data was then correlated to spectroscopic ellipsometry measurements of the deposition rate of Zn atoms on a Si substrate positioned at 12 cm away from the ZnO target. The deposition rate scaled linearly with the number density of Zn atoms. In sharp contrast with previous studies on RF magnetron sputtering of Cu targets, these findings indicate that metastable atoms play a negligible role on the plasma deposition dynamics of Zn-based coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Emission Characterization of High-Power Hall Thruster Wear

Optical emission spectroscopy is employed to correlate BN insulator erosion with high-power operation of the NASA 300M Hall-effect thruster. Actinometry leveraging excited xenon states is used to normalize the emission spectra of ground state boron as a function of thruster operating condition. Trends in the strength of the boron signal are correlated with thruster power, discharge voltage, discharge current and magnetic field strength. The boron signals are shown to trend with discharge current and show weak dependence on discharge voltage. The trends are consistent with data previously collected on the NASA 300M and NASA 457M thrusters but are different from conventional wisdom.

WIlliams, George J.↗

Optical Diagnostic Characterization of High-Power Hall Thruster Wear and Operation

Optical emission spectroscopy is employed to correlate BN insulator erosion with high-power Hall thruster operation. Specifically, actinometry leveraging excited xenon states is used to normalize the emission spectra of ground state boron as a function of thruster operating condition. Trends in the strength of the boron signal are correlated with thruster power, discharge voltage, and discharge current. In addition, the technique is demonstrated on metallic coupons embedded in the walls of the HiVHAc EM thruster. The OES technique captured the overall trend in the erosion of the coupons which boosts credibility in the method since there are no data to which to calibrate the erosion rates of high-power Hall thrusters. The boron signals are shown to trend linearly with discharge voltage for a fixed discharge current as expected. However, the boron signals of the higher-power NASA 300M and NASA 457Mv2 trend with discharge current and show an unexpectedly weak to inverse dependence on discharge voltage. Electron temperatures measured optically in the near-field plume of the thruster agree well with Langmuir probe data. However, the optical technique used to determine Te showed unacceptable sensitivity to the emission intensities. Near-field, single-frequency imaging of the xenon neutrals is also presented as a function of operating condition for the NASA 457 Mv2.

Williams, George J., Jr.↗