Search NASA⌕ Search

SEARCH · Search NASA

Results for “ADIABATIC DEMAGNETIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Lattice Vibrations Boost Demagnetization Entropy in Shape Memory Alloy

Magnetocaloric (MC) materials present an avenue for chemical-free, solid state refrigeration through cooling via adiabatic demagnetization. We have used inelastic neutron scattering to measure the lattice dynamics in the MC material Ni 45 Co 5 Mn 36.6 In 13.4 . Upon heating across TC, the material exhibits an anomalous increase in phonon entropy of 0.17 0.04 k_B/atom, which is nine times larger than expected from conventional thermal expansion. We find that the phonon softening is focused in a transverse optic phonon, and we present the results of first-principle calculations which predict a strong coupling between lattice distortions and magnetic excitations.

36 MATERIALS SCIENCE↗

The X-ray Integral Field Unit at the end of the Athena reformulation phase

The Athena mission entered a redefinition phase in July 2022, driven by the imperative to reduce the mission cost at completion for the European Space Agency below an acceptable target, while maintaining the flagship nature of its science return. This notably called for a complete redesign of the X-ray Integral Field Unit (X-IFU) cryogenic architecture towards a simpler active cooling chain. Passive cooling via successive radiative panels at spacecraft level is now used to provide a 50 K thermal environment to an X-IFU owned cryostat. 4.5 K cooling is achieved via a single remote active cryocooler unit, while a multi-stage Adiabatic Demagnetization Refrigerator ensures heat lift down to the 50 mK required by the detectors. Amidst these changes, the core concept of the readout chain remains robust, employing Transition Edge Sensor microcalorimeters and a SQUID-based Time-Division Multiplexing scheme. Noteworthy is the introduction of a slower pixel. This enables an increase in the multiplexing factor (from 34 to 48) without compromising the instrument energy resolution, hence keeping significant system margins to the new 4 eV resolution requirement. This allows reducing the number of channels by more than a factor two, and thus the resource demands on the system, while keeping a 4’ field of view (compared to 5’ before). Here, in this article, we will give an overview of this new architecture, before detailing its anticipated performances. Finally, we will present the new X-IFU schedule, with its short term focus on demonstration activities towards a mission adoption in early 2027.

Peille, Philippe [Centre National d’Etudes Spatial↗

The LiteBIRD Satellite Mission: Sub-Kelvin Instrument

Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through “B-mode” (divergent-free) polarization pattern embedded in the cosmic microwave background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The US LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40–235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280–402 GHz) with three types of single frequency detectors. The detectors will be made with transition edge sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator. The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplifier. Lastly, we report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.

79 ASTRONOMY AND ASTROPHYSICS↗

Updated design of the CMB polarization experiment satellite LiteBIRD

Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermal conductance characterization of a pressed copper rope strap between 0.13 K and 10 K

Mechanically pressing the ends of a copper braid in solid copper is an effective way of constructing solderless conductive straps for cryogenic applications. In this paper we present thermal conductance data of such a copper strap measured using the two-heater one-thermometer method. The measurements span a wide temperature range of 0.13–10 K applicable to a variety of cryogenic systems employing liquid helium, pulse tube coolers, adiabatic demagnetization refrigerators, and others. Above ≈1.5 K, the braid thermal conductivity dominates the strap conductance resulting in a near-linear dependence with temperature. The variation with temperature below ≈1.5 K is near-quadratic indicating dominance of the pressed contact conductance at the strap ends. In conclusion, electron-beam welding the braid to the strap ends is shown to be a promising solution for improving sub-Kelvin thermal conductance of the strap.

43 PARTICLE ACCELERATORS↗

A Simple Computational Proxy for Screening Magnetocaloric Compounds

Alternating cycles of isothermal magnetization and adiabatic demagnetization applied to a magnetocaloric material can drive refrigeration in very much the same manner as cycles of gas compression and expansion. The material property of interest in finding candidate magnetocaloric materials is ΔS M , their gravimetric entropy change upon application of a magnetic field under isothermal conditions. There is, however, no general method for screening materials for such an entropy change without actually performing the relevant, time- and effort-intensive magnetic measurements. Here we propose a simple computational proxy based on performing nonmagnetic and magnetic density functional theory calculations on magnetic materials. This proxy, which we term the magnetic deformation Σ M , is a measure of how much the unit cell deforms comparing with the relaxed structures with and without the inclusion of spin polarization. Σ M appears to correlate very well with experimentally measured magnetic entropy change values. Here, the proxy has been tested against 33 ferromagnetic materials with known ΔS M , including nine materials newly measured for this study. It has then been used to screen 134 ferromagnetic materials for which the magnetic entropy has not yet been reported, identifying 30 compounds as being promising for further study. As a demonstration of the effectiveness of our approach, we have prepared one of these compounds and measured its isothermal entropy change. MnCoP, with a T C of 575 K, shows a maximal ΔS M of –6.0 J kg –1 K –1 for an H = 5 T applied field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A practical superconducting-microcalorimeter X-ray spectrometer for beamline and laboratory science

We describe a series of microcalorimeter X-ray spectrometers designed for a broad suite of measurement applications. The chief advantage of this type of spectrometer is that it can be orders of magnitude more efficient at collecting X-rays than more traditional high-resolution spectrometers that rely on wavelength-dispersive techniques. This advantage is most useful in applications that are traditionally photon-starved and/or involve radiation-sensitive samples. Each energy-dispersive spectrometer is built around an array of several hundred transition-edge sensors (TESs). TESs are superconducting thin films that are biased into their superconducting-to-normal-metal transitions. The spectrometers share a common readout architecture and many design elements, such as a compact, 65 mK detector package, 8-column time-division-multiplexed superconducting quantum-interference device readout, and a liquid-cryogen-free cryogenic system that is a two-stage adiabatic-demagnetization refrigerator backed by a pulse-tube cryocooler. We have adapted this flexible architecture to mate to a variety of sample chambers and measurement systems that encompass a range of observing geometries. There are two different types of TES pixels employed. The first, designed for X-ray energies below 10 keV, has a best demonstrated energy resolution of 2.1 eV (full-width-at-half-maximum or FWHM) at 5.9 keV. The second, designed for X-ray energies below 2 keV, has a best demonstrated resolution of 1.0 eV (FWHM) at 500 eV. Our team has now deployed seven of these X-ray spectrometers to a variety of light sources, accelerator facilities, and laboratory-scale experiments; these seven spectrometers have already performed measurements related to their applications. Another five of these spectrometers will come online in the near future. We have applied our TES spectrometers to the following measurement applications: synchrotron-based absorption and emission spectroscopy and energy-resolved scattering; accelerator-based spectroscopy of hadronic atoms and particle-induced-emission spectroscopy; laboratory-based time-resolved absorption and emission spectroscopy with a tabletop, broadband source; and laboratory-based metrology of X-ray-emission lines. Here, we discuss the design, construction, and operation of our TES spectrometers and show first-light measurements from the various systems. Finally, because X-ray-TES technology continues to mature, we discuss improvements to array size, energy resolution, and counting speed that we anticipate in our next generation of TES-X-ray spectrometers and beyond.

47 OTHER INSTRUMENTATION↗

Structural and magnetic characterization of CeTa 7 ⁢O 19 and YbTa 7 ⁢ O 19 with a two-dimensional pseudospin-$\frac{1}{2}$ triangular lattice

Triangular lattice antiferromagnets are prototypes for frustrated magnetism and may potentially realize novel quantum magnetic states such as a quantum spin-liquid ground state. A recent work suggests NdTa 7 ⁢O 19 with rare-earth triangular lattice is a quantum spin-liquid candidate and highlights the large family of rare-earth heptatantalates as a framework for quantum magnetism investigation. Here, in this paper, we report the structural and magnetic characterization of CeTa 7 ⁢ O 19 and YbTa 7 ⁢ O 19 . Both compounds are isostructural to NdTa 7 ⁢O 19 with no detectable structural disorder. For CeTa 7 ⁢O 19 , the crystal field energy levels and parameters are determined by inelastic neutron scattering measurements. Based on the crystal field result, the magnetic susceptibility data could be well fitted and explained, which reveals that CeTa 7 ⁢O 19 is a highly anisotropic Ising triangular-lattice antiferromagnet (𝑔 𝑧 ⁡/𝑔 𝑥⁢𝑦 ∼ 3) with very weak exchange interaction (J ∼ 0.22 K). For YbTa 7⁢ O 19 , millimeter-sized single crystals could be grown. The anisotropic magnetization and electron spin resonance data show that YbTa 7⁢ O 19 has a contrasting in-plane magnetic anisotropy with 𝑔 𝑧 ⁡/𝑔 𝑥⁢𝑦 ∼ 0.67 similar as that of YbMgGaO 4 . The above results indicate that CeTa7⁢ O 19 and YbTa 7 ⁢O 19 with pseudospin-1/2 ground states might either be quantum spin-liquid candidate materials or find applications in adiabatic demagnetization refrigeration due to the weak exchange interaction.

Pan, Feihao↗

Initial in-orbit operation of the soft X-ray spectrometer Resolve onboard the X-ray imaging and spectroscopy mission satellite

The X-Ray Imaging and Spectroscopy Mission satellite was launched on September 6, 2023 (UT). Its Resolve instrument is a high-resolution X-ray spectrometer enabled by a microcalorimeter array thermally anchored to a 50-mK heat sink. Many sensitive, critical sub-systems comprise Resolve, including a multistage cryogenic cooling system, thin-film aperture filters, low-noise electronics, on-board signal processing, and several sources of X-rays for calibration. We summarize the initial on-orbit power-on and checkout of Resolve that commenced immediately after launch. Soon after launch, the cryocoolers were activated, and their operation was successfully established. On October 9, 2023, the first cycle of the adiabatic demagnetization refrigerator was carried out, bringing the sensors to their steady-state operational temperatures. Following this, the energy resolution at 5.9 keV was successfully measured. The energy scale of the system is highly sensitive to the thermal environment surrounding both the sensors and their analog electronics. Gain correction was performed using reference X-ray lines from onboard calibration sources. To optimize cooler frequency settings, noise spectra were collected across a range of frequencies, and the most suitable frequency pair was selected based on the in-orbit environment. During the final phase of the checkout, an attempt was made to open the gate valve, which is designed to protect the Dewar’s interior from external pressure during ground operations and launch. Unfortunately, this attempt was unsuccessful. As a result, the checkout process was temporarily paused, and a stable operational strategy was subsequently developed to enable Resolve to function effectively with the gate valve remaining closed.

X-ray micro-calorimeter↗

Pre- and post-launch operation of the Resolve soft X-ray spectrometer onboard the XRISM satellite

Resolve is a high-resolution X-ray spectrometer onboard the X-Ray Imaging and Spectroscopy Mission (XRISM), launched on September 6 (UT), 2023. The Resolve has performed better than its required spectral resolution (7 eV at full width at half maximum at 6 keV), both on the ground and in orbit, and has been confirmed to have comparable performance to the soft X-ray spectrometer onboard the ASTRO-H (Hitomi) satellite. The focal plane is composed of an array of microcalorimeter detectors operated at 50 mK to achieve the required energy resolution, and the cooling system is designed to satisfy the lifetime requirement of over 3 years. The focal plane and cooling system are contained in a vacuum-insulated dewar. The cooling system is equipped with a two-stage adiabatic demagnetization refrigerator (ADR) that uses superfluid liquid helium (LHe) as its heat sink. The system includes a third ADR stage that can be used to provide the heat sink when the helium is exhausted. A Joule–Thomson cooler and several two-stage Stirling coolers are used to reduce the heat load on the LHe. During pre-launch operations, we carried out a superfluid LHe top-off operation. The resultant amount of LHe onboard Resolve was over 35 L before launch, which is sufficient to meet the lifetime requirement. During post-launch operation, the LHe vent valve was opened 5 min after launch during rocket acceleration, and the cryocoolers were turned on after several orbits, as planned, which established stable cooling within the dewar. Pre- and post-launch operations for the Resolve instrument were planned around multiple constraints from launch vehicle operations; all were successfully completed, and the launch requirements were fully met.

X-Ray Imaging and Spectroscopy Mission↗

Cryogenic Performance of the SPT-SLIM Receiver

The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wave line-intensity mapping experiment, deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral Summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We present on the cryogenic performance of the SPT-SLIM receiver for this Year 1 observing campaign. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Referigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150mK. We demonstrate stable thermal performance of the focal plane module during observing operations in line with thermal modelling, enabling a cryogenic operation efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.

Young, Matthew [Fermilab]↗

Design and Performance of the SPT-SLIM Receiver Cryostat

The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wavelength line-intensity mapping experiment, which was deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We report on the cryogenic performance of the SPT-SLIM receiver for the first year of commissioning observations. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Refrigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150 mK. We demonstrate stable thermal performance of the focal plane module during observations consistent with thermal modeling, enabling a cryogenic operating efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.

Young, M. R. [Fermilab; Chicago U., KICP]↗

Method for cooling nanostructures to microkelvin temperatures

We propose a new scheme aimed at cooling nanostructures to microkelvin temperature based on the well established technique of adiabatic nuclear demagnetization: we attach each device measurement lead to an individual nuclear refrigerator, allowing efficient thermal contact to a microkelvin bath. On a prototype consisting of a parallel network of nuclear refrigerators, temperatures of {approx}1 mK simultaneously on ten measurement leads have been reached upon demagnetization, thus completing the first steps toward ultracold nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of partial substitution of Ni by Co on the magnetic and magnetocaloric properties of Ni{sub 50}Mn{sub 35}In{sub 15} Heusler alloy

The magnetic and magnetocaloric properties of Ni{sub 48}Co{sub 2}Mn{sub 35}In{sub 15} were studied using magnetization and heat capacity measurements. The magnetic entropy change ({Delta}S{sub M}) was evaluated from both magnetizing and demagnetizing fields. An inverse {Delta}S{sub M} for the magnetizing and demagnetizing processes were found to be 20.5 and 18.5 J kg{sup -1} K{sup -1}, respectively, for {Delta}H = 5 T at the martensitic transition (T = T{sub M}). The normal {Delta}S{sub M} was found to be -5.4 J kg{sup -1} K{sup -1} for both fields at the paramagnetic/ferromagnetic transition (T = T{sub C}). The effective refrigeration capacity at T{sub M} and T{sub C} for magnetizing field was found to be 268 and 243 J/kg (285 and 243 J/kg for the demagnetizing field), respectively. We have also estimated the density of states, the Debye temperature, and the inverse adiabatic temperature change to be 4.93 states/eV f.u., 314 K, and -3.7 K, respectively, from the measured heat capacity data.

36 MATERIALS SCIENCE↗

Observation of Room-Temperature Range Magnetocaloric Effect in PrSr{sub 1−x}Pb{sub x}Mn{sub 2}O{sub 6} (0.4 ≤ x ≤ 0.6) Double-Perovskite Manganite System

The Pr(Sr{sub 1−x}Pb{sub x})Mn{sub 2}O{sub 6} (0.4 ≤ x ≤ 0.6) double-perovskite manganite samples have been produced by using a sol-gel method. The Rietveld refinement method has been used to analyse the structural properties, and the results show that all samples are crystallized in monoclinic structure with P21/n space group without any impurity phase. The temperature dependence of magnetization measurement shows that samples exhibit paramagnetic to ferromagnetic phase transition by decreasing temperature. The values of the T{sub C} are determined as 286, 280 and 278 K for x= 0.4, 0.5 and 0.6 in Pr(Sr{sub 1−x}Pb{sub x})Mn{sub 2}O{sub 6} samples, respectively. Isothermal applied magnetic field-dependent magnetization curves are used to determine both order of magnetic phase transition and magnetic entropy change (ΔS{sub M}) value. −ΔS{sub M} values are found as 3.68, 3.15 and 2.85 J kg{sup − 1} K{sup − 1} for PSPM-4, PSPM-5 and PSPM-6 samples, respectively. Additionally, magnetic phase transition of the samples is identified as second-order magnetic phase transition that indicates accompanying small thermal and magnetic hysteresis to the samples during the phase transition. Relative cooling power (RCP) values are determined as 282, 233 and 268 J kg{sup − 1} for PSPM-4, PSPM-5 and PSPM-6 samples, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thirty Years of Near Room Temperature Magnetic Cooling: Where we are Today and Future Prospects

The seminal study by Brown in 1976 showed that it was possible to use the magnetocaloric effect to produce a substantial cooling effect near room temperature. About 15 years later Green et al. built a device which actually cooled a load other than the magnetocaloric material itself and the heat exchange fluid. The major breakthrough, however, occurred in 1997 when the Ames Laboratory/Astronautics proof-of-principle refrigerator showed that magnetic refrigeration was competitive with conventional gas compression cooling. Since then, over 25 magnetic cooling units have been built and tested throughout the world. The current status of near room temperature magnetic cooling is reviewed, including a discussion of the major problems facing commercialization and potential solutions thereof. The future outlook for this revolutionary technology is discussed.

36 MATERIALS SCIENCE↗

Magnetism in Gd-W films

Vapor condensation techniques are useful to prepare magnetic alloys whose components have low or even negligible equilibrium mutual solubility. In this work, one of these techniques--sputtering--was used to obtain Gd{sub x}W{sub 1-x} alloys whose magnetic properties were investigated as a function of the Gd atomic concentration x. Gadolinium and various Gd-based alloys are promising materials for magnetic refrigeration and this was one of the motivations for this study. The Gd{sub x}-W{sub 1-x} films were sputter deposited from Gd and W targets with x ranging from 0 to 1 as determined by x-ray energy-dispersive spectroscopic analyses. X-ray diffraction patterns indicate that crystalline structures were formed at low and high Gd concentrations, while at intermediate concentrations, the films were amorphous. Magnetization measurements, performed as a function of temperature and with static and alternating applied fields, reveal a spin glasslike behavior in all the W-containing samples for temperatures below the freezing temperature T{sub f}. For low and intermediate Gd concentrations, and for T>T{sub f}, the films were paramagnetic, while a ferromagnetic phase was observed in the Gd-W alloy of the highest Gd content. The magnetocaloric effect was investigated from the magnetization isotherms M versus H, from which the isothermal magnetic entropy variation {delta}S{sub M} as a function of T, for the removal of an applied field of 50 kOe, was determined. It was observed that the maximum value of {delta}S{sub M} for each {delta}S{sub M} versus T curve and the temperature at which these maxima occur, are strongly dependent on x.

36 MATERIALS SCIENCE↗