Search NASA⌕ Search

SEARCH · Search NASA

Results for “AETC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

33 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Joint Acceptance Attenuation Factor of Integrated Pressure with Unsteady Pressure-Sensitive Paint Measurements

The Unsteady Pressure-Sensitive Paint (uPSP) is widely used to measure the surface pressure of the scaled model in the wind tunnel tests. Compared to the conventional pressure transducers, uPSP has the advantage of high spatial resolution. With multiple high-speed cameras, the uPSP data collected with the camera pixels are mapped to the surface grid of the scaled model and converted to pressure. The shot noise, which is associated with the quantum processes both in the generation of the photons by the luminescent uPSP and in the conversion of the photons into electrons within the camera, is the dominant component of the noise in the uPSP measurement. The integrated pressure is usually computed as an area-weighted average of the uPSP measured pressures on the grid nodes of a user-defined patch. The effect of the shot noise is reduced in the integrated pressure; however, the measurement of the aerodynamic pressure is also attenuated. This paper discusses the Joint Acceptance Attenuation Factor (JAAF) of the integrated pressure with uPSP measurements. The JAAF is defined as the ratio of the auto or cross Power Spectral Density (PSD) of the integrated aerodynamic pressure on the patch to the average auto PSD of the aerodynamic pressure on the grid nodes of the patch. Under the assumption that the cross spectrum of the aerodynamic pressure can be described with the Corcos model, the closed-form formula of the JAAF is derived for the integrated pressure on rectangular patches via the summation of uPSP measurements on discrete grid nodes. The closed-form formula is verified via the integration of the pressure field of Corcos model over continuous areas. The properties of the JAAF with different parameters are presented and the applications in the comparison of the spectrum of the pressure transducers and uPSP measurements, which were collected in the NASA Space Launch System (SLS) tests with the 11-by-11-foot transonic wind tunnel at NASA Ames Research Center in December 2017 and September 2019 respectively, are also discussed. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities(AETC) Portfolio Office.

Unsteady Pressure-Sensitive Paint↗
NASA NTRSDate not supplied

NASA’s Unsteady Pressure-Sensitive Paint Research and Operational Capability Developments

To address challenges in the field of unsteady aerodynamics, NASA has developed a new state-of-the-art capability called Unsteady Pressure-Sensitive Paint (uPSP). It has been developed as an operational surface-pressure measurement capability for deployment in NASA’s AETC ground test facilities. Offering unprecedented spatiotemporal resolution, uPSP is an extremely powerful tool for investigating unsteady separated flows. To accelerate scientific discovery, uPSP data is to be processed and distributed as rapidly as it is acquired. Several demonstrations of the technology collected valuable data that has been used to develop data products, a robust processing pipeline, and other computational capabilities. A collection of papers documents the most recent research and development work on the uPSP technology and capability. This paper summarizes the current state of this effort at NASA.

Pressure-Sensitive Paint↗
NASA NTRSDate not supplied

NASA’s Unsteady Pressure-Sensitive Paint Research and Operational Capability Developments

To address challenges in the field of unsteady aerodynamics, NASA has developed a new stateof-the-art capability called Unsteady Pressure-Sensitive Paint (uPSP). It has been developed as an operational surface-pressure measurement capability for deployment in NASA’s AETC ground test facilities. Offering unprecedented spatiotemporal resolution, uPSP is an extremely powerful tool for investigating unsteady separated flows. To accelerate scientific discovery, uPSP data is to be processed and distributed as rapidly as it is acquired. Several demonstrations of the technology collected valuable data that has been used to develop data products, a robust processing pipeline, and other computational capabilities. A collection of papers documents the most recent research and development work on the uPSP technology and capability. This paper summarizes the current state of this effort at NASA.

Pressure-Sensitive Paint↗
NASA NTRSDate not supplied

Analysis of Dynamic Mode Decomposition Outputs of Unsteady Pressure-Sensitive Paint Measurements in the NASA Wind Tunnel Tests

This paper discusses the Dynamic Mode Decomposition (DMD) outputs of the Unsteady Pressure-Sensitive Paint (uPSP) measurements, which were collected with four Phantom high-speed cameras at a constant sample frequency in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. In this paper, the effectiveness to use the DMD outputs of uPSP measurements in the diagnosis and analysis of the aerodynamic and acoustic phenomena in the SLS ATAT is demonstrated. The work described in the paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities (AETC) Project.

acoustics↗
NASA NTRSDate not supplied

Humidity Measurements at NASA Glenn Research Center Wind Tunnels

This presentation reviews the humidity measurements systems used at the large-scale wind tunnels at the NASA Glenn Research Center (as of July 2023), including the 9- by 15-Foot Low Speed Wind Tunnel, 8- by 6-Foot Supersonic Wind Tunnel, and the 10- by 10-Foot Supersonic Wind Tunnel. Effects of hygrometer accuracy and saturation vapor pressure model choice on Mach number are also investigated. Information in this presentation is intended for discussion with the AETC-supported Wind Tunnel Characterization Working Group during the 2023 Face-to-Face Meetings July 25-27 at NASA Glenn Research Center.

Humidity↗
NASA NTRSDate not supplied

Thermal Recovery Testing & Investigations in CE-12 Free Jet Calibration Facility

This presentation reviews thermal recovery testing practices in the CE-12 Free Jet Probe Calibration Facility at the NASA Glenn Research Center. Investigations were conducted to diagnose errors identified in test results, as compared to theory. Proposed solutions and future monitoring of the facility conditions are also discussed. Information in this presentation is intended for discussion with the AETC-supported Wind Tunnel Characterization Working Group during the 2023 Face-to-Face Meetings July 25-27 at NASA Glenn Research Center.

WTCWG↗
NASA NTRSDate not supplied

FY23 Descent Systems Study Annual Review

Previous NASA studies of landing human-scale payloads on Mars have concluded that supersonic retropropulsion (SRP), or using multiple retrorocket engines beginning at supersonic descent conditions, is an enabling technology. DSS is partnering with the Aerosciences Evaluation and Test Capabilities (AETC) office to conduct a SRP test in the Langley Unitary Plan Wind Tunnel (UPWT) to quantify the SRP prediction capabilities of multiple computational fluid dynamics (CFD) solvers for a range of model configurations, thrust magnitudes, and tunnel conditions.

Propulsive Descent↗
NASA NTRSDate not supplied

Evaluation of CFD Predictions of CobraMRV Control Surface Effectiveness at the NASA Langley Unitary Plan Wind Tunnel

The ability of CFD simulations to serve as a surrogate for wind tunnel testing at high supersonic speeds has been evaluated for a sub-scale model of the Co-Optimization Blunt-body Re-entry Analysis-Mid-lift-to-drag Rigid Vehicle (CobraMRV) human Mars entry vehicle concept. The vehicle was tested at the Unitary Plan Wind Tunnel (UPWT) at the NASA Langley Research Center under flow conditions and surface control configurations relevant to the entry stage of a flight mission. The CFD simulations were performed prior to gaining access to test results in order to assess how blind predictions obtained using best practices compare to experiments. Solutions of empty tunnel simulations were used as inflow boundary condition for the CobraMRV simulations in a truncated portion of the test section. Different solvers and turbulence models were used by separate teams to assess sensitivity to numerical methods, physics, and users. After release of the test results, the pre-test computations were compared to the experimental results, and additional analyses have been conducted to explain observed discrepancies. The amount of time and resources dedicated to each phase of the computational work was logged for comparison to that required for wind tunnel tests, and to inform planning of future CFD data base development projects.

ARMD↗
NASA NTRSDate not supplied

LAVA CFD Analysis of the Check Standard Model within the Langley Unitary Plan Wind Tunnel

This paper is part of an e ort to assess the current capability of Computational Fluid Dynamics (CFD) to accurately predict the experimental forces and base pressure on the Check Standard Model (CSM). The wind tunnel data for this model is gathered during annual monitoring of test-to-test repeatability for the Langley Unitary Plan Wind Tunnel (LUPWT). A blind database designed to help quantify the uncertainty of simulating LUPWT for the CSM repeatability tests was run using the Launch, Ascent and Vehicle Aerodynamics (LAVA) CFD code. The Reynolds-averaged Navier-Stokes equations were used for the predictions presented in the paper. Prior to running the database, best practices were established both for simulating and characterizing the ow of the high-speed legof the LUPWT where the test took place, as well the CSM when inserted within its test section.

ARMD↗