SEARCH · Search NASA
Results for “ALKALINE EARTH METAL”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of Alkaline-Earth-Metal Substitutions on the Bismuth Ruthenate Structure: Bi[subscript 2-x]A;#8242;[subscript x]Ru[subscript 2]O[subscript 6]O;#8242;[subscript 1-y] (A;#8242; = Mg, Ca, Sr)
Abstract not provided
Two-dimensional Dirac semimetal based on the alkaline earth metal CaP 3
Using an evolutionary algorithm in combination with first-principles density-functional theory calculations, we identify a two-dimensional (2D) CaP 3 monolayer as a new Dirac semimetal due to inversion and nonsymmorphic spatial symmetries of the structure. This new topological material, composed of light elements, exhibits high structural stability (higher than the phase known in the literature), which is confirmed by thermodynamic and kinetic stability analysis. Moreover, it satisfies the electron filling criteria, so that its Dirac state is located near the Fermi level. The existence of the Dirac state predicted by the theoretical symmetry analysis is also confirmed by first-principles electronic band structure calculations. We find that the energy position of the Dirac state can be tuned by strain, while the Dirac state is unstable against an external electric field since it breaks the spatial inversion symmetry. In conclusion, our findings should be instrumental in the development of 2D Dirac fermions based on light elements for their application in nanoelectronic devices and topological electronics.
Preliminary Determination of the Impact of Alkaline Earth Metals on Crystalline Silicotitanate
Savannah River Remediation (SRR) recently deployed the Tank Closure Cesium Removal (TCCR) system which utilizes an ion exchange process to remove 137 Cs from tank waste supernate. In TCCR, salt solution is filtered and then passed through ion exchange columns containing crystalline silicotitanate (CST) media, commercially known as UOP IONSIV™ R9120-B, which is highly selective for removing cesium. The current process focuses on dissolving salt in Savannah River Site (SRS) Tank 10H, followed by processing in the TCCR skid located near the tank. Prior to processing each batch of waste generated in Tank 10H, the projected maximum cesium loading on the CST is determined using an in-tank batch contact equilibrium test. This involves placing a small amount (~0.1 g) of CST in a “teabag” device and submerging it in the tank waste for a period of 10 days. Results from those earlier teabag tests had indicated much lower cesium loading than predicted by the equilibrium sorption model (ZAM). There are numerous possible explanations for this result; however, based on the observed loadings of Ca (and other metals) on the CST from the teabag tests, it was hypothesized that competition from these other ions may be limiting the cesium loadings.
Ionically conductive powders and films, and methods of preparation
A solid ionically conductive composition (e.g., nanoparticles of less than 1 micron or a continuous film) comprising at least one element selected from alkali metal, alkaline earth metal, aluminum, zinc, copper, and silver in combination with at least two elements selected from oxygen, sulfur, silicon, phosphorus, nitrogen, boron, gallium, indium, tin, germanium, arsenic, antimony, bismuth, transition metals, and lanthanides. Also described is a battery comprising an anode, a cathode, and a solid electrolyte (corresponding to the above ionically conductive composition) in contact with or as part of the anode and/or cathode. Further described is a thermal (e.g., plasma-based) method of producing the ionically conductive composition. Further described is a method for using an additive manufacturing (AM) process to produce an object constructed of the ionically conductive composition by use of particles of the ionically conductive composition as a feed material in the AM process.
Rechargeable lithium sulfur and/or selenium battery
An electrochemical device includes a cathode comprising a first cathode component of lithium and Se x S y ; and a second cathode component of an alkali metal and/or alkaline earth metal sulfur and/or selenide, different from the first cathode component; an initial discharge product of a polyselenide and/or polysulfide anion charge compensated by an alkali metal and/or alkaline earth metal cation; an anode; a porous separator; and a non-aqueous electrolyte with one or more lithium salts, and one or more solvents; wherein the electrochemical device is a lithium sulfur and/or lithium selenide battery.
Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues
The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.
The Many-Body Expansion for Metals: II. Nonadditive Terms in Clusters Composed of Metals with n s 1 , n s 2 , and n s 2 p 1 Configurations
The many-body expansion (MBE) was applied to homometallic and heterometallic trimers of metals with ns 1 , ns 2 , and ns 2 p 1 configurations to investigate its convergence, the magnitude and nature (stabilizing/destabilizing) of the individual terms and seek an understanding of their variation across the different families of clusters. In particular, we examined the series of alkali metals (Li 3 , Na 3 , K 3 , Li 2 Na, LiNa 2 ), alkali metal borides (Li 2 B and LiB 2 ), and alkaline earth metals (Be 3 , Be 2 Mg, BeMg 3 , and Mg 3 ) trimers, as well as sodium clusters Na n , n = 2–5. Here, we found that there is no uniform contribution (stabilizing or destabilizing) across the series in the different families of trimers. For instance, the 2-B term stabilizes the ground states of the Na 3 (doublet), Na 4 (singlet), and Na 5 (doublet) clusters, and the 3-B term destabilizes them; however, the opposite holds for the quartet state of the Li 3 , Li 2 Na, LiNa 2 , and Na 3 clusters (destabilizing 2-B, stabilizing 3-B). Substituting Li with B in the quartet state of Li 3 results in a significant reduction of the 3-B term amounting to 16% (Li 2 B) and 5% (LiB 3 ) of the binding energy. On the contrary, the ground states of the alkaline earth metal clusters (Be 3 , Be 2 Mg, BeMg 3 , and Mg 3 ) are stabilized by the 3-B term, while the 2-B term destabilizes them. Overall, we find that the 3-B terms significantly stabilize the high-spin multiplicity states of the ns 1 configurations and the low-spin states of the ns 2 configurations. Finally, as the size of the metal increases, the contribution of the 3-B term to the binding energy decreases due to the longer metal–metal bond distances.
Determination of transition metal ions in fossil fuel associated wastewaters using chelation ion chromatography
Here, this study outlines the development and subsequent validation of a method using chelation ion chromatography (CIC) pretreatment followed by traditional ion chromatography (IC) and post column UV/vis detection to measure transition metals in fossil fuel wastewaters, such as oil & gas (O&G) brines and coal mine drainage (CMD) waters. Measurement of transition metals is often an important characterization step in the research of environmental and energy systems. IC represents one way to measure these metals with the advantages of being versatile, simple and relatively low cost compared to other analytical methods. However, high concentrations of alkali and alkaline earth metals present in fossil fuel wastewaters will decrease IC detectability of transition metals in these waters. In this study, a CIC method was developed for the analysis of transition metal ions (Fe 3+ , Cu 2+ , Ni 2+ , Zn 2+ , Co 2+ , Mn 2+ , and Fe 2+ ) in fossil fuel associated wastewaters such as Appalachian CMD and O&G wastewaters from the Permian and Bakken shale basins in the United States. CIC system incorporated an on-line chelator column (e.g., the MetPac CC-1) with high selectivity for transition metals over alkali and alkaline earth metals for salt matrix removal prior to transition metal separation and detection. Additional method developments also included acidifying all samples to 2% v/v HCl and using gradient elution rather than isocratic. The recoverability of transition metals in simple salt solutions commonly found in CMD and brine samples (e.g. NaCl, Na 2 SO 4 , CaCl 2 ) using CIC was evaluated and compared to that using traditional IC. Our results found that the CIC system significantly improved transition metal recoveries for samples in 10,000 mg/L CaCl 2 matrix, reaching 87%-108% recovery for all analytes, as opposed to 2-323% recovery in traditional IC. The limits of detection in this study achieved 10.09 – 161.2 μg/L, comparable to reported values in similar IC studies. The developed method was also verified with certified water samples, resulting in 89% - 111% recoveries in samples with higher analyte concentrations (i.e. >4x the LoDs). The developed method achieved 87% -112% recoveries for most analytes in CMD samples and 72%-138% recoveries for Bakken shale samples, relative to ICP-MS values. Overall, the current IC method can be a very good screening tool for fast and cheap analysis for transition metals at mg/L level, to facilitate selection of samples for more detailed ICP-MS analysis.
Ternary borides and borohydrides for hydrogen storage and method of synthesis
A method and a system is provided for obtaining solid-state hydrogen storage and release in materials with at least theoretical loaded hydrogen densities of 11 wt % or greater that can deliver hydrogen and be recharged at moderate temperatures enabling incorporation into hydrogen storage systems suitable for transportation applications. These materials comprise ternary boride materials comprising certain light transition metals and alkaline or alkaline earth metals, and ideally have no or very little phase separation. A process of making these materials is also provided.
Carbonation and Sulfidation of Mg- and Ni-Containing Solutions: Implications for Carbon Mineralization and Critical Element Recovery
Carbonation of alkaline earth metals ( e.g. , magnesium (Mg)) and sulfidation of nickel (Ni) are promising methods to achieve concurrent carbon mineralization and selective Ni recovery. However, the coexistence of alkaline earth metals and Ni from silicate ores or mining wastewater complicates the carbonation and sulfidation owing to cation coprecipitation. To better understand simultaneous metal carbonation and Ni-sulfide formation, we used Mg- and Ni-containing solutions and systematically investigated the Mg and Ni coprecipitates’ phase transformation during sequential/concurrent carbonation and sulfidation. During a single carbonation process, hydromagnesite dehydrated and formed magnesite over time. Nickel bicarbonate formed and became a Mg–Ni carbonate solid solution because of their similar ionic radii. During a single sulfidation process, the pH did not affect Ni-sulfide formation, but it controlled Mg behavior. Specifically, at pH 9.6, brucite formed, while at pH 7.8, Mg 2+ remained in the solution. For the sequential carbonation–sulfidation process, Ni-carbonate formed during carbonation converted to Ni-sulfide because of the low Ni-sulfide K sp . For the sulfidation–carbonation process, Ni-sulfide remained the same even after carbonation and Mg-carbonate precipitates. For the concurrent carbonation and sulfidation process, Mg-carbonate and Ni-sulfide formed simultaneously. Finally, this study develops a scientific foundation of carbonation and sulfidation processes, benefiting coupled CO 2 storage and sulfide-enabled resource recovery.
Highly selective cross ketonization of renewable acids over magnesium oxide
The rising demand for linear alkylbenzene surfactants (LAS) poses an environmental threat as LAS are industrially produced from petroleum using corrosive acid catalysts. Cross ketonization is a promising route of converting furans and fatty acids to oleo-furansulfonates, precursors for renewable, performance-enhanced LAS replacements. Here, we explore various alkaline earth metals and mixed metal oxides for the cross-ketonization reaction and find that MgO achieves ~90% yield by minimizing the decarboxylation side reaction. Here, we illustrate the role of molecular structure on the cross-ketonization reaction and the role of complex formation over alkaline-earth metal oxides in minimizing side reactions. We overcome catalyst deactivation by regeneration over multiple runs. This research demonstrates the effectiveness of heterogeneous catalysts for cross ketonization toward developing renewable surfactants.
Hybrid Molecular Beam Epitaxy for Single-Crystalline Oxide Membranes with Binary Oxide Sacrificial Layers
The advancement in thin-film exfoliation for synthesizing oxide membranes has led to possibilities for creating artificially assembled heterostructures with structurally and chemically incompatible materials. The sacrificial layer method is a promising approach to exfoliate as-grown films from a compatible material system, allowing for their integration with dissimilar materials. Nonetheless, the conventional sacrificial layers often possess an intricate stoichiometry, thereby constraining their practicality and adaptability, particularly when considering techniques such as molecular beam epitaxy (MBE). This is where easy-to-grow binary alkaline-earth-metal oxides with a rock salt crystal structure are useful. These oxides, which include (Mg, Ca, Sr, Ba)O, can be used as a sacrificial layer covering a much broader range of lattice parameters compared to conventional sacrificial layers and are easily dissolvable in deionized water. In this study, we show the epitaxial growth of the single-crystalline perovskite SrTiO 3 (STO) on sacrificial layers consisting of crystalline SrO, BaO, and Ba 1–x Ca x O films, employing a hybrid MBE method. Our results highlight the rapid (≤5 min) dissolution of the sacrificial layer when immersed in deionized water, facilitating the fabrication of millimeter-sized STO membranes. Using high-resolution X-ray diffraction, atomic-force microscopy, scanning transmission electron microscopy, impedance spectroscopy, and scattering-type near-field optical microscopy (SNOM), we demonstrate single-crystalline STO membranes with bulk-like intrinsic dielectric properties. The employment of alkaline earth metal oxides as sacrificial layers is likely to simplify membrane synthesis, particularly with MBE, thus expanding the research and application possibilities.
Alkaline earth metal-assisted dinitrogen activation at nickel
Rare examples of trinuclear [Ni–N 2 –M–N 2 –Ni] core (M = Ca, Mg) with linear bridged dinitrogen ligands are reported in this work.
Methods of making YSZ supported catalyst, and methods of using the same
The present invention relates to catalysts, methods of making catalysts, and methods of using catalysts, where the catalysts include: at least one of a transition metal and a transition metal oxide supported by yttria-stabilized zirconia (YSZ), where the transition metal is promoted by at least one of an alkali metal and an alkaline-earth metal.
Diffusion and Solvation Dynamics of Ions in Water: Beyond the Brownian Approximation
The coupled dynamics of ions and water molecules in their first hydration shell impact a variety of processes including ion diffusion, selective ion transport in water-filled nanopores, and the kinetics of ion-pairing, ion adsorption, and metal-ligand binding reactions. In this work, we study these coupled dynamics for alkali metals (Li, Na, K, Rb, Cs), alkaline Earth metals (Mg, Ca, Sr, Ba), and chloride through the lens of their dependence on ion isotopic mass. Results are validated against previous measurements of the isotopic mass-dependence of ion diffusion coefficients in water and previous ab initio calculations of ion high-frequency dynamics in water. We find that the vibrational power spectra of ions in water consistently exhibit either two or three peaks, i.e., ions have several rattling frequencies within their solvations shells as previously reported for a subset of the species examined here. These frequencies have different sensititivies to isotopic mass that may serve as signatures of ion solvation processes (such as the tendency of ions to orient their first-shell water molecules) and that also may relate to Hofmeister-like effects including the relative affinity of different metals for ribonucleic acid (RNA).