Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALUMINUM ALLOY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of a Castable High Strength Secondary Aluminum Alloy from Recycled Wrought Aluminum Scrap

A new process for recycling scrap AA7075 aerospace alloys directly into a high strength castable secondary alloy is demonstrated. The process involves enhancing the castability of the utilized primary wrought aluminum scrap feedstock by scrap alloy chemistry optimization and zirconium additions in order to mitigate the inherent hot tearing tendency of 7075 alloys. By utilizing the new process, the hot tearing index of scrap AA7075 was reduced from 26 to 4. Defect-free castings were obtained in pilot-scale castings trials. The developed secondary 7075 alloy also satisfied preset target mechanical properties with strength levels exceeding 250 MPa and elongation levels higher than 3%. The validity of the new approach and its readiness for transition to commercial practice was demonstrated by casting cylinder heads directly from the modified 7075 scrap.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Elevated temperature aluminum alloys

Three aluminum-lithium alloys are provided for high performance aircraft structures and engines. All three alloys contain 3 wt % copper, 2 wt % lithium, 1 wt % magnesium, and 0.2 wt % zirconium. Alloy 1 has no further alloying elements. Alloy 2 has the addition of 1 wt % iron and 1 wt % nickel. Alloy 3 has the addition of 1.6 wt % chromium to the shared alloy composition of the three alloys. The balance of the three alloys, except for incidentql impurities, is aluminum. These alloys have low densities and improved strengths at temperatures up to 260.degree. C. for long periods of time.

Meschter, Peter↗
DOE OSTI2021

High-strength aluminum alloy coatings, deformation layers and methods of making the same

A high-strength aluminum alloy coating. The coating includes aluminum, 9R phase, fine grains, nanotwins, stacking faults, and a solute capable of stabilizing the 9R phase, the fine grains, and the stacking faults. A method of making a high-strength aluminum alloy coating on a substrate. The method includes, depositing the constituents of an aluminum alloy on a substrate such that the deposit forms a high-strength aluminum alloy coating containing 9R phase, fine grains, nanotwins, and stacking faults. A high-strength deformation layer in and on a casting of an aluminum alloy containing 9R phase, fine grains, nanotwins, stacking faults, and a solute capable of stabilizing the PR phase, the fine grains, and the stacking faults. A method of making a high-strength deformation layer in and on a casting of an aluminum alloy by deforming the alloy such that deformation layer contains 9R phase, fine grains, nanotwins, and stacking faults.

Zhang, Xinghang↗
DOE OSTI2023

High-strength aluminum alloy coatings, deformation layers and methods of making the same

A high-strength aluminum alloy coating. The coating includes aluminum, 9R phase, fine grains, nanotwins, stacking faults, and a solute capable of stabilizing the 9R phase, the fine grains, and the stacking faults. A method of making a high-strength aluminum alloy coating on a substrate. The method includes, depositing the constituents of an aluminum alloy on a substrate such that the deposit forms a high-strength aluminum alloy coating containing 9R phase, fine grains, nanotwins, and stacking faults. A high-strength deformation layer in and on a casting of an aluminum alloy containing 9R phase, fine grains, nanotwins, stacking faults, and a solute capable of stabilizing the PR phase, the fine grains, and the stacking faults. A method of making a high-strength deformation layer in and on a casting of an aluminum alloy by deforming the alloy such that deformation layer contains 9R phase, fine grains, nanotwins, and stacking faults.

Zhang, Xinghang↗
DOE OSTI2024

Upcycled high-strength aluminum alloys from scrap through solid-phase alloying

Although recycling secondary aluminum can lead to energy consumption reduction compared to primary aluminum manufacturing, products produced by traditional melt-based recycling processes are inherently limited in terms of alloy composition and microstructure, and thus final properties. To overcome the constraints associated with melting, we have developed a solid-phase recycling and simultaneous alloying method. This innovative process enables the alloying of 6063 aluminum scrap with copper, zinc, and magnesium to form a nanocluster-strengthened high-performance aluminum alloy with a composition and properties akin to 7075 aluminum alloy. The unique nanostructure with a high density of Guinier-Preston zones and uniformly precipitated nanoscale η‘/Mg(CuZn) 2 strengthening phases enhances both yield and ultimate tensile strength by >200%. By delivering high-performance products from scrap that are not just recycled but upcycled , this scalable manufacturing approach provides a model for metal reuse, with the option for on-demand upcycling of a variety of metallic materials from scrap sources.

36 MATERIALS SCIENCE↗
NASA NTRS1939

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to Young's modulus, based on the tests, are given.

Osgood, William R↗
DOE OSTI2023

Metallurgical and mechanical characterization of ATP-5 aluminum alloys for minimizing machining distortion

ATP-5 aluminum alloy was considered as an alternative to 6061-T651 aluminum alloy to minimize machining distortion. ATP-5 is a proprietary cast alloy that is compositionally similar to 5083 aluminum and is purported to have excellent machinability, stability, and corrosion response. Dimensional stability tests, mechanical testing, chemical analysis, microstructural analysis, and fractography were completed to understand the metallurgy of the ATP-5 alloy and assess its potential as a 6061-T651 alloy alternative. Ultimately, the ATP-5 was found to retain dimensional stability issues, albeit to a lesser extent, relative to the 6061-T651 alloy. Combined with the residual cast structure observed microstructurally and lot-to-lot mechanical property variation, the alloy was deemed not suitable for a structural application. Alternative uses of ATP-5 include tooling, molds, vacuum chucks, fixtures, and jigs, where the material can shine in non-load bearing applications with a need for dimensional control and machinability.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Systems study of transport aircraft incorporating advanced aluminum alloys

A study was performed to quantify the potential benefits of utilizing advanced aluminum alloys in commercial transport aircraft and to define the effort necessary to develop fully the alloys to a viable commercial production capability. The comprehensive investigation (1) established realistic advanced aluminum alloy property goals to maximize aircraft systems effectiveness (2) identified performance and economic benefits of incorporating the advanced alloy in future advanced technology commercial aircraft designs (3) provided a recommended plan for development and integration of the alloys into commercial aircraft production (4) provided an indication of the timing and investigation required by the metal producing industry to support the projected market and (5) evaluate application of advanced aluminum alloys to other aerospace and transit systems as a secondary objective. The results of the investigation provided a roadmap and identified key issues requiring attention in an advanced aluminum alloy and applications technology development program.

Sakata, I. F.↗
NASA NTRS1987

Aluminum Alloys for High Temperatures

New Al/Li alloys processed by rapid solidification show greatly improved strength-to-density ratios. Alloys suitable substitutes for heavier titanium alloys and weaker aluminum alloys in high-performance aircraft, bombers, and transports. Also suitable for use in high-performance-aircraft structures heated by engines and normally constructed from titanium alloys.

Meschter, Peter J.↗
NASA NTRS1989

Superplastic forming and diffusion bonding of rapidly solidified, dispersion strengthened aluminum alloys for elevated temperature structural applications

Rapidly solidified alloys, based upon the Al-Fe-V-Si system and designed for elevated temperature applications, were evaluated for superplasticity and diffusion bonding behavior. Alloys with 8, 16, 27, and 36 volume percent silicide dispersoids were produced; dispersoid condition was varied by rolling at 300, 400, and 500 C (572, 752, and 932 F). Superplastic behavior was evaluated at strain rates from 1 x 10(exp -6)/s to 8.5/s at elevated temperatures. The results indicate that there was a significant increase in elongation at higher strain rates and at temperatures above 600 C (1112 F). However, the exposure of the alloys to temperatures greater than 600 C (1112 F) resulted in the coarsening of the strengthening dispersoid and the degradation of mechanical properties. Diffusion bonding was possible using low gas pressure at temperatures greater than 600 C (1112 F) which also resulted in degraded properties. The bonding of Al-Fe-V-Si alloys to 7475 aluminum alloy was performed at 516 C (960 F) without significant degradation in microstructure. Bond strengths equal to 90 percent that of the base metal shear strength were achieved. The mechanical properties and microstructural characteristics of the alloys were investigated.

Ting, E. Y.↗
DOE OSTI2021

Aluminum Alloy (6061-O, 5052-O, and 1100) Dissolution Rate Testing

The dissolution rates of two aluminum alloys (6061-O and 5052-O) were tested to determine which would be able to replace an aluminum alloy that was difficult to procure (6063-T6). The findings of this memo conclude that the dissolution rates of 6061-O and 5052-O are two orders of magnitude slower than 6063-T6. Therefore, it is unlikely that 6061-O and 5052-O would be adequate replacements for 6063-T6 based on similar dissolution rates in a Hg-catalyzed, nitric acid solution. Another area of interest was how temperature variation would influence the dissolution rate of an aluminum alloy (specifically 1100). This separate study found that the dissolution rate of the aluminum alloy below 86 °C was approximately 0.0014 % of the dissolution rate at 94.5°C and above. Therefore, at or below 86 °C the dissolution rate reduces significantly which translates to much longer dissolution times.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Seacoast stress corrosion cracking of aluminum alloys

The stress corrosion cracking resistance of high strength, wrought aluminum alloys in a seacoast atmosphere was investigated and the results were compared with those obtained in laboratory tests. Round tensile specimens taken from the short transverse grain direction of aluminum plate and stressed up to 100 percent of their yield strengths were exposed to the seacoast and to alternate immersion in salt water and synthetic seawater. Maximum exposure periods of one year at the seacoast, 0.3 or 0.7 of a month for alternate immersion in salt water, and three months for synthetic seawater were indicated for aluminum alloys to avoid false indications of stress corrosion cracking failure resulting from pitting. Correlation of the results was very good among the three test media using the selected exposure periods. It is concluded that either of the laboratory test media is suitable for evaluating the stress corrosion cracking performance of aluminum alloys in seacoast atmosphere.

Humphries, T. S.↗
NASA NTRS2003

Aluminum Alloy and Article Cast Therefrom

A cast article from an aluminum alloy, which has improved mechanical properties at elevated temperatures, has the following composition in weight percent: Silicon 14 - 25.0, Copper 5.5 - 8.0, Iron 0.05 - 1.2, Magnesium 0.5 - 1.5, Nickel 0.05 - 0.9, Manganese 0.05 - 1.0, Titanium 0.05 - 1.2, Zirconium 0.05 - 1.2, Vanadium 0.05 - 1.2, Zinc 0.05 - 0.9, Phosphorus 0.001 - 0.1, and the balance is Aluminum, wherein the silicon-to-magnesium ratio is 10 - 25, and the copper-to-magnesium ratio is 4 - 15. The aluminum alloy contains a simultaneous dispersion of three types of Al3X compound particles (X=Ti, V, Zr) having a LI2, crystal structure, and their lattice parameters are coherent to the aluminum matrix lattice. A process for producing this cast article is also disclosed, as well as a metal matrix composite, which includes the aluminum alloy serving as a matrix and containing up to about 60% by volume of a secondary filler material.

Lee, Jonathan A.↗