Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM CHLORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Development of Leaching Processes for the Recovery of Rare Earth Elements from Acid Mine Drainage Precipitates

Acid mine drainage (AMD) has been a challenge for mine operators to address and has had significant environmental impacts when there is a failure to address it. Fortunately, there is a regulation in the US that requires the treatment of AMD before water can be discharged into the environment. AMD is generated when sulfide minerals are exposed to water and air from mining. The acidic water then leaches metals from the surrounding rock, creating the potential for environmental contamination of this acidic water containing dissolved metals. AMD can contain high concentrations of metals like iron, aluminum, and manganese and also have been shown to contain trace concentrations of critical minerals, including rare earth elements (REEs). This environmental waste stream is now being researched as a potential source for REEs. There is a patented process for processing and extracting REEs from AMD which produces rare earth oxide preconcentrate (REOP) from AMD treatment precipitates and a final stage mixed rare earth oxide (MREO) product. This body of research examines a selective leaching process for each of these products and determines the activation energy associated with the leaching processes. Acid leaching with HCl was examined to selectively leach REEs from REOP while contaminant metals remained in the solid residue. The maximum leaching recovery of the REEs from the REOP was approximately 90% and an activation energy of 6.4 kJ/mol at pH 3.0. Ammonium chloride leaching was examined to selectively remove contaminant metals from a MREO product. The ammonium chloride process successfully leached major contaminant metals in excess of 85% recovery and had a maximum activation energy of 40.0 kJ/mol.

01 COAL, LIGNITE, AND PEAT↗

Direct Conversion of MnO2 into Atomic Mn Sites for Oxygen Reduction

Development of platinum group metal (PGM)-free catalysts has been investigated to replace the platinum group metal catalyst in future inexpensive polymer electrolyte membrane (PEM) fuel cells. Usually, synthetic methods for these PGM-free catalysts involve introducing transition-metal salts or molecules. Herein, we demonstrate a facile synthetic method to prepare PGM-free Mn-N-C catalysts by directly converting manganese oxides into highly active MnN4 sites. Typically, MnO2 is used as a Mn source. Ammonium chloride and benzimidazole are introduced during high-temperature treatment to enhance catalytic activity and stability further. Ammonia generated from the decomposition of ammonium chloride can improve the intrinsic ORR activity of MnNx moieties through chemical or electronic effects by introducing additional nitrogen groups. The Mn-N-C catalyst exhibits promising ORR activity, achieving a half-wave potential of 0.83 V in 0.5 M H2SO4, outperforming most PGM-free ORR catalysts. The robust carbon structure resulting from organic-molecule treatment is also verified by electrochemical and physical characterization, thereby improving the catalyst's durability.

Yang, Xiaoxuan↗

Prebiotic nucleotide oligomerization in a fluctuating environment - Effects of kaolinite and cyanamide

The clay kaolinite was tested for its ability to promote nucleotide oligomerization in model prebiotic systems. Heterogeneous mixtures of clay, water and nucleotide were repeatedly evaporated to dryness at 60 C and redissolved in water in cyclic fashion in the presence or absence of cyanamide and/or ammonium chloride. With or without cycling, kaolinite alone did not promote the oligomerization of nucleotides at detectable levels. Cycling of clay in combination with cyanamide, however, promoted high levels of condensation to a mixture of oligonucleotides and dinucleotide pyrophosphate without requiring ammonium chloride. Although cycling with clay favored synthesis of dinucleotide pyrophosphate, cycling without clay enhanced formation of oligonucleotides. These results support the hypothesis that the presence of clays in fluctuating environments would have influenced the course of prebiotic condensation reactions.

Odom, D. G.↗

Suppressive effects of acid-forming diet against the tumorigenic potential of pioglitazone hydrochloride in the urinary bladder of male rats

Pioglitazone hydrochloride (PIO), a peroxisome proliferator-activated receptor gamma (PPAR{gamma}) agonist, was administered orally for 85 weeks at 16 mg/kg/day to male rats fed either a diet containing 1.5% ammonium chloride (acid-forming diet) or a control diet to investigate the effects of urinary acidification induced by the acid-forming diet on the tumorigenic potential of PIO in the urinary bladder. The surviving animals at the end of the administration period were followed to the end of the 2-year study period without changes in the diet and were subjected to terminal necropsy on Week 104. The number of urinary microcrystals, evaluated by manual counting with light microscopy and by an objective method with a laser diffraction particle size analyzer, was increased by PIO on Weeks 12 and 25 and the increases were markedly suppressed by urinary acidification. Urinary citrate was decreased by PIO throughout the study period, but no changes were seen in urinary oxalate at any timepoint. The incidences of PIO-treated males bearing at least one of the advanced proliferative changes consisting of papillary hyperplasia, nodular hyperplasia, papilloma or carcinoma were significantly decreased from 11 of 82 males fed the control diet to 2 of 80 males fed the acid-forming diet. The acid-forming diet did not show any effects on the toxicokinetic parameters of PIO and its metabolites. Microcrystalluria appears to be involved in the development of the advanced stage proliferative lesions in bladder tumorigenesis induced by PIO in male rats.

60 APPLIED LIFE SCIENCES↗

Development of taste sensor system for differentiation of Indonesian herbal medicines

In Indonesia, herbal medicines are usually produced by small and medium enterprises which are relatively low in quality control. The purpose of this paper is to report that we have developed a taste sensor system with global selectivity, i.e., electronic tongue (e-tongue) for differentiation of Indonesian herbal medicines. The e-tongue was composed of five kinds of ion selective electrodes as working electrodes, data acquisition system, and pattern recognition system. Each ion selective electrode (ISE) was built by attaching lipid/polymer membrane. For this purpose, the five kinds of membranes were built by mixing lipid, plasticizer (nitrophenyl octyl ether/NPOE), polyvinyl chloride (PVC), and tetrahydrofuran (THF). In this study, we employed five kinds of lipid, namely oleic acid (OA), dioctyl phosphate (DOP), decyl alcohol (DA), dodecylamine (DDC), and trioctyl methyl ammonium chloride (TOMA). In this case, the membranes transform information of taste substances into electric signal. The five kinds of Indonesian herbal medicine were purchased from local supermarket in Yogyakarta, i.e., kunyit asam (made from turmeric and tamarind), beras kencur (made from rice and kencur), jahe wangi (made from ginger and fragrance), sirih wangi (made from betel leaf), and temulawak (made from Javanese ginger). Prior to detecting the taste from the Indonesian herbal medicine samples, each ion selective electrode was tested with five basic taste samples, i.e., for saltiness, sweetness, umami, bitterness, and sourness. All ISEs showed global selectivity to all samples. Furthermore, the array of ISEs showed specific response pattern to each Indonesian herbal medicine. For pattern recognition system, we employed principle component analysis (PCA). As a result, the e-tongue was able to differentiate five kinds of Indonesian herbal medicines, proven by the total variance of first and second principle components is about 93%. For the future, the e-tongue may be developed for quality control application in herbal medicine industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self assembled monolayer based liquid crystal biosensor for free cholesterol detection

A unique cholesterol oxidase (ChOx) liquid crystal (LC) biosensor, based on the disruption of orientation in LCs, is developed for cholesterol detection. A self-assembled monolayer (SAM) of Dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DMOAP) and (3-Aminopropyl)trimethoxy-silane (APTMS) is prepared on a glass plate by adsorption. The enzyme (ChOx) is immobilized on SAM surface for 12 h before utilizing the film for biosensing purpose. LC based biosensing study is conducted on SAM/ChOx/LC (5CB) cells for cholesterol concentrations ranging from 10 mg/dl to 250 mg/dl. The sensing mechanism has been verified through polarizing optical microscopy, scanning electron microscopy, and spectrometric techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Effects of Chemical Additives on the Induction Phase in Solid-State Thermal Decomposition of Ammonia Borane

The solid-state decomposition of ammonia borane (AB) alone and in the presence of chemical additives was investigated by a series of experimental methods to develop an approach for reducing the induction period for hydrogen release. Gas chromatography techniques were used to measure the yield of hydrogen as a function of time under isothermal conditions between 70 and 90 °C, and the polyaminoborane (PAB) products produced from hydrogen loss from AB show significant cross linking by 11B NMR spectroscopy. Raman microscopy was used to follow the transformation of crystalline AB to amorphous AB with the subsequent formation of the diammoniate of diborane (DADB). A gas burette was used to monitor the time-dependent release of hydrogen from AB in the presence of chemical additives. The combination of these approaches provides insight into the mechanism of hydrogen release from solid AB. The release of molecular hydrogen is described by a process involving sequential induction (disruption of dihydrogen bonds), nucleation (formation of DADB), and growth (hydrogen release through dehydrocoupling). Addition of DADB or ammonium chloride to neat AB significantly reduces the induction time for hydrogen release. The authors wish to acknowledge support from the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. This work was performed as part of the Center of Excellence in Chemical Hydrogen Storage and in collaboration with the International Partnership for the Hydrogen Economy. Pacific Northwest National Laboratory is operated for the U.S. Department of Energy by Battelle.

08 HYDROGEN↗

Protein expression and isotopic enrichment based on induction of the Entner-Doudoroff pathway in Escherichia coli

Highlights: Black-Right-Pointing-Pointer The Entner-Doudoroff pathway is induced during protein expression in E. coli. Black-Right-Pointing-Pointer 1-{sup 13}C-gluconate and {sup 15}NH{sub 4}Cl provide a carbonyl-amide protein backbone labeling scheme. Black-Right-Pointing-Pointer The enrichment pattern is determined by nuclear magnetic resonance. -- Abstract: The Entner-Doudoroff pathway is known to exist in many organisms including bacteria, archea and eukarya. Although the common route for carbon catabolism in Escherichia coli is the Embden-Meyerhof-Parnas pathway, it was shown that gluconate catabolism in E. coli occurs via the Entner-Doudoroff pathway. We demonstrate here that by supplying BL21(DE3) competent E.coli cells with gluconate in a minimal growth medium, protein expression can be induced. Nuclear magnetic resonance data of over-expressed ubiquitin show that by using [1-{sup 13}C]-gluconate as the only carbon source, and {sup 15}N-enriched ammonium chloride, sparse isotopic enrichment in the form of a spin-pair carbonyl-amide backbone enrichment is obtained. The specific amino acid labeling pattern is analyzed and is shown to be compatible with Entner-Doudoroff metabolism. Isotopic enrichment serves as a key factor in the biophysical characterization of proteins by various methods including nuclear magnetic resonance, mass spectrometry, infrared spectroscopy and more. Therefore, the method presented here can be applied to study proteins by obtaining sparse enrichment schemes that are not based on the regular glycolytic pathway, or to study the Entner-Doudoroff metabolism during protein expression.

60 APPLIED LIFE SCIENCES↗

Physico-chemical studies of amorphous carbon nanotubes synthesized at low temperature

Highlights: ► Amorphous carbon nanotubes are successfully produced via a simple method at low temperature. ► Nanotubes in straight morphologies with open ends. ► Acid treatment increases the extent of amorphous for nanotubes. ► Amorphous nanotubes exhibit phenomena of π plasmon absorbance and possess higher bandgap. -- Abstract: This work provides better understanding on the nature of amorphous carbon nanotubes, which are synthesized via a simple chemical route. Amorphous carbon nanotubes (α-CNTs) are successfully synthesized by heating a mixture of ferrocene and ammonium chloride at temperature as low as 200 °C and are treated with hydrochloric acid. Transmission and field emission scanning electron microscopy techniques are performed to examine the morphology and dimension of the samples. X-ray diffraction tests confirm the amorphous structure of the nanotubes. The Fourier transform infrared spectroscopy and Raman studies indicate that the treated α-CNTs consist of many defective walls and are more amorphous compared with the untreated α-CNTs. Ultraviolet–visible absorption studies reveal that the untreated and treated α-CNTs exhibit plasmon absorbance with high bandgaps of 4 eV and 4.35 eV, respectively.

36 MATERIALS SCIENCE↗

Stability and biocompatibility of photothermal gold nanorods after lyophilization and sterilization

Graphical abstract: - Highlights: • Morphological changes are observed for CTABr capped gold nanorods over time. • Polystyrenesulfonate (PSS) and polyethyleneglycol (PEG) coated nanorods are stable. • Re-suspendible and sterilizable colloids are prepared using those capping agents. • Those materials are efficient heat sinks potentially used in photothermal therapy. - Abstract: Suspensions in phosphate buffered saline (PBS) of gold nanorods stabilized with cetyltrimethyl ammonium chloride (CTABr), polystyrenesulfonate (PSS) and methyl-polyethyleneglycol-thiol (m-PEG-SH) have been prepared and the evolution of their colloidal stability and plasmonic response over time has been evaluated. Their performance after lyophilization, alcoholic sterilization and resuspension has also been characterized. Sub-cytotoxic doses on HeLa cells were calculated for the three surface functionalizations used. Their heating efficiency at different exposure times was also evaluated after being irradiated with near infrared light. The best results were obtained for m-PEG-SH stabilized rods, which were not only stable, sterilizable and lyophilizable, but also biocompatible at all doses tested, showing potential as a stable, re-suspendible and biocompatible hyperthermic agent.

36 MATERIALS SCIENCE↗

Tribological properties of CrN coatings deposited by nitro-chromizing treatment on AISI D2 steel

In this work, the wear test of uncoated and chromium nitride coated AISI D2 cold work tool steel against alumina ball realized at 0.1 m/s sliding speeds and under the loads of 2.5N, 5N and 10N. Steel samples were nitrided at 575°C for 8 h in the first step of the coating process, and then chromium nitride coating was performed thermo-reactive deposition technique (TRD) in a powder mixture consisting of ferro-chromium, ammonium chloride and alumina at 1000°C for 2 h. Nitro-chromized samples were characterized by X-Ray diffraction analysis (XRD), scanning electron microscopy (SEM), micro-hardness and ball on disk wear tests. The coating layer formed on the AISI D2 steel was compact and homogeneous. X-ray studies showed that the phase formed in the coated layer is Cr{sub 2}N. The depth of the layer was 8.15 µm. The average hardness of the layer was 2160±15 HV{sub 0.025}. For uncoated and chromium nitride materials, wear rate increased with increasing load. The results of friction coefficient and wear rate of the tested materials showed that the CrN coating presents the lowest results.

36 MATERIALS SCIENCE↗

Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4V alloys by Pack Cementation process

Wear and high temperature oxidation resistance of some titanium-based alloys needs to be enhanced, and this can be effectively accomplished by surface treatment. Molybdenizing is a surface treatment where molybdenum is introduced into the surface of titanium alloys causing the formation of wear-resistant surface layers containing molybdenum, while aluminizing of titanium-based alloys has been reported to improve their high temperature oxidation properties. Whereas pack cementation and other surface modification methods have been used for molybdenizing or aluminizing of wrought and/or cast pure titanium and titanium alloys, such surface treatments have not been reported on titanium alloys produced by powder metallurgy (PM). Also a critical understanding of the process parameters for simultaneous one step molybdeno-aluminizing of titanium alloys by pack cementation and the predominant mechanism for this process have not been reported. The current research work describes the surface modification of titanium and Ti-6Al-4V prepared by PM by molybdeno-aluminizing and analyzes thermodynamic aspects of the deposition process. Similar coatings are also deposited to wrought Ti-6Al-4V and compared. Characterization of the coatings was carried out using scanning electron microscopy and x-ray diffraction. For both titanium and Ti-6Al-4V, the use of a powder pack containing ammonium chloride as activator leads to the deposition of molybdenum and aluminium into the surface but also introduces nitrogen causing the formation of a thin titanium nitride layer. In addition, various titanium aluminides and mixed titanium aluminium nitrides are formed. The appropriate conditions for molybdeno-aluminizing as well as the phases expected to be formed were successfully determined by thermodynamic equilibrium calculations. - Highlights: •Simultaneous co-deposition of Mo-Al onto powder metallurgy and wrought Ti alloy •Thermodynamic calculations were used to optimize deposition conditions •External TiN and internal a Mo-rich layer on all alloy substrates •Titanium aluminides and Ti-Al mixed nitrides are formed on Ti-6Al-4V •The presence of Al and V alloying elements modifies the diffusion of Mo.

36 MATERIALS SCIENCE↗

Hepatocyte nuclear factor 4A improves hepatic differentiation of immortalized adult human hepatocytes and improves liver function and survival

Immortalized human hepatocytes (IHH) could provide an unlimited supply of hepatocytes, but insufficient differentiation and phenotypic instability restrict their clinical application. This study aimed to determine the role of hepatocyte nuclear factor 4A (HNF4A) in hepatic differentiation of IHH, and whether encapsulation of IHH overexpressing HNF4A could improve liver function and survival in rats with acute liver failure (ALF). Primary human hepatocytes were transduced with lentivirus-mediated catalytic subunit of human telomerase reverse transcriptase (hTERT) to establish IHH. Cells were analyzed for telomerase activity, proliferative capacity, hepatocyte markers, and tumorigenicity (c-myc) expression. Hepatocyte markers, hepatocellular functions, and morphology were studied in the HNF4A-overexpressing IHH. Hepatocyte markers and karyotype analysis were completed in the primary hepatocytes using shRNA knockdown of HNF4A. Nuclear translocation of β-catenin was assessed. Rat models of ALF were treated with encapsulated IHH or HNF4A-overexpressing IHH. A HNF4A-positive IHH line was established, which was non-tumorigenic and conserved properties of primary hepatocytes. HNF4A overexpression significantly enhanced mRNA levels of genes related to hepatic differentiation in IHH. Urea levels were increased by the overexpression of HNF4A, as measured 24 h after ammonium chloride addition, similar to that of primary hepatocytes. Chromosomal abnormalities were observed in primary hepatocytes transfected with HNF4A shRNA. HNF4α overexpression could significantly promote β-catenin activation. Transplantation of HNF4A overexpressing IHH resulted in better liver function and survival of rats with ALF compared with IHH. HNF4A improved hepatic differentiation of IHH. Transplantation of HNF4A-overexpressing IHH could improve the liver function and survival in a rat model of ALF. - Highlights: • Immortalized human hepatocytes (IHH) could provide an unlimited supply of hepatocytes. • Hepatocyte nuclear factor 4A (HNF4A) plays a role in hepatic differentiation. • HNF4A improved hepatic differentiation of IHH. • Transplantation of HNF4A-overexpressing IHH could improve liver function.

60 APPLIED LIFE SCIENCES↗

Autophagy prevention sensitizes AKTi-1/2-induced anti-hepatocellular carcinoma cell activity in vitro and in vivo

Molecule-targeted therapy has become the research focus for hepatocellular carcinoma (HCC). Persistent PI3K-AKT activation is often detected in HCC, representing a valuable oncotarget for treatment. Here, we tested the anti-HCC activity by a potent AKT inhibitor: AKT inhibitor 1/2 (AKTi-1/2). In both established (HepG2 and Huh-7) and primary human HCC cells, treatment with AKTi-1/2 inhibited cell survival and proliferation, but induced cell apoptosis. AKTi-1/2 blocked AKT-mTOR activation, yet simultaneously provoked cytoprotective autophagy in HCC cells. The latter was evidenced by ATG-5 and Beclin-1 upregulation, p62 downregulation as well as LC3B-GFP puncta formation. Autophagy inhibition, via pharmacological inhibitors (3-methyladenine, ammonium chloride, and bafilomycin A1) or Beclin-1 siRNA knockdown, significantly potentiated AKTi-1/2-induced HepG2 cell death and apoptosis. In nude mice, AKTi-1/2 intraperitoneal injection inhibited HepG2 tumor growth. Significantly, its anti-tumor activity in vivo was further sensitized when combined with Beclin-1 shRNA knockdown in HepG2 tumors. Together, these results demonstrate that autophagy activation serves as a main resistance factor of AKTi-1/2 in HCC cells. Autophagy prevention therefore sensitizes AKTi-1/2-induced anti-HCC activity in vitro and in vivo. - Highlights: • AKTi-1/2 inhibits human HCC cells in vitro. • Autophagy inhibitors sensitize AKTi-1/2-induced HCC cell death and apoptosis. • Beclin-1 siRNA potentiates AKTi-1/2-induced HepG2 cell death and apoptosis. • Beclin-1 knockdown augments AKTi-1/2-induced anti-HepG2 tumor activity in vivo.

60 APPLIED LIFE SCIENCES↗

Fabrication of antibacterial blend film from poly (vinyl alcohol) and quaternized chitosan for packaging

Highlights: • HTCC/PVA blend films were prepared through a simple mixing method. • The blend films had greater elongation at break and good optical transmittance. • The blend films had low oxygen permeability and water vapor permeability. • The films had good activity against Escherichia coli and Staphylococcus aureus. - Abstract: Blend films from poly (vinyl alcohol) (PVA) containing N-(2-hydroxy) propyl-3-trimethyl ammonium chloride chitosan (HTCC) were prepared via a simple mixing and casting method. The films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction measurements (XRD), scanning electron microscopy and ultraviolet-visible measurements (UV–vis). The effects of HTCC amount on mechanical properties, oxygen permeability, water vapor permeation, and antibacterial properties against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) of the films were investigated. FTIR and XRD analysis show that HTCC and PVA in the blend films interacted by hydrogen bonding. SEM and UV–vis analysis reveal the good compatibility between HTCC and PVA. Compared with pure PVA film, the blend films had greater elongation at break, lower water permeability, and higher antibacterial activity. The HTCC addition decreased the tensile strength and the light transmittance. The results suggest that HTCC/PVA blend films have a potential as packaging materials.

36 MATERIALS SCIENCE↗

The Effects of Physicochemical Properties of Sludge on Dewaterability Under Chemical Conditioning with Amphoteric Polymer

This study investigated the effects of chemical conditioning with amphoteric terpolymer poly (acrylamide-’acryloyloxyethyl trimethyl ammonium chloride -2-acrylamido-2-methyl-propane sulfonate) (PADA) on sludge dewaterability. Particle size, fractal dimension, surface charge, extracellular polymeric substances (EPS) and trivalent metal ions (Al{sup 3+} and Fe{sup 3+}) of sludge were monitored and Pearson statistical analysis was used to understand the correlation of dewaterability and physicochemical properties of sludge. The results revealed that: (1) Sludge dewaterability was significantly enhanced by amphoteric polymer PADA. (2) Particle, fractal dimension and surface charge of sludge were associated with anionic degrees and molecular weights of polymer. (3) PADA had apparent effects on removal of EPS and enrichment of metal ions in sludge system. (4) Content of water and specific resistance to filtration had statistically strong correlations with the values of particle size, fractal dimension and EPS, but had weak correlations with values of surface charge and metal ions.

36 MATERIALS SCIENCE↗

Cellulose triacetate based novel optical sensor for uranium estimation

A cellulose triacetate (CTA) based optode has been developed by immobilizing tricapryl-methyl ammonium chloride (Aliquat 336) as the extractant and 2-(5-bromo-2-pyridylazo)-5- diethyl-aminophenol (Br-PADAP) as the chromophore. The optode changes color (from yellow to magenta) due to uranium uptake in bicarbonate medium ({approx}10{sup -4} M) at pH 7-8 in the presence of triethanolamine (TEA) buffer. The detection limit of the optode film (dimension: 3 cm x 1 cm) was determined to be {approx}0.3 {mu}g/mL for a 15 mL pure uranium sample at pH 7-8 (in TEA buffer). The effects of experimental parameters have been evaluated in terms of maximum uptake of U(VI), minimum response time, and reproducibility and stability of the Br-PADAP-U(VI ) complex formed in the optode matrix. The applicability of the optimized optode has been examined in the effluent samples obtained during magnesium diuranate precipitation step following the TBP purification cycle. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulation of iridovirus-induced apoptosis by endocytosis, early expression, JNK, and apical caspase

Chilo iridescent virus (CIV) is the type species for the family Iridoviridae, which are large, isometric, cytoplasmic dsDNA viruses. We examined the mechanism of apoptosis induction by CIV. High CIV doses (CIV{sub XS}; 400 {mu}g/ml), UV-irradiated virus (CIV{sub UV}; 10 {mu}g/ml) and CVPE (CIV protein extract; 10 {mu}g/ml) induced apoptosis in 60% of treated Choristoneura fumiferana (IPRI-CF-124T) cells. Normal doses of infectious CIV (10 {mu}g/ml) induced apoptosis in only 10% of C. fumiferana (CF) cells. Apoptosis was inhibited by Z-IETD-FMK, an apical caspase inhibitor, indicating that CIV-induced apoptosis requires caspase activity. The putative caspase in CF cells was designated Cf-caspase-i. CIV{sub UV} or CVPE enhanced Cf-caspase-i activity by 80% at 24 h relative to mock-treated cells. Since the MAP kinase pathway induces or inhibits apoptosis depending on the context, we used JNK inhibitor SP600125 and demonstrated drastic suppression of CVPE-induced apoptosis. Thus, the JNK signaling pathway is significant for apoptosis in this system. Virus interaction with the cell surface was not sufficient for apoptosis since CIV{sub UV} particles bound to polysterene beads failed to induce apoptosis. Endocytosis inhibitors (bafilomycin or ammonium chloride) negated apoptosis induction by CIV{sub UV}, CIV{sub XS} or CVPE indicating that entry through this mode is required. Given the weak apoptotic response to infectious CIV, we postulated that viral gene expression inhibited apoptosis. CIV infection of cells pretreated with cycloheximide induced apoptosis in 69% of the cells compared to 10% in normal infections. Furthermore, blocking viral DNA replication with aphidicolin or phosphonoacetic acid suppressed apoptosis and Cf-caspase-i activity, indicating that early viral expression is necessary for inhibition of apoptosis, and de novo synthesis of viral proteins is not required for induction. We show for the first time that, in a member of the family Iridoviridae, apoptosis: (i) requires entry and endocytosis of virions or virion proteins, (ii) is inhibited under conditions permitting early viral expression, and (iii) requires the JNK signaling pathway. This is the first report of JNK signal requirement during apoptosis induction by an insect virus.

60 APPLIED LIFE SCIENCES↗