Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Aspirating Seal Development: Analytical Modeling and Seal Test Rig

This effort is to develop large diameter (22 - 36 inch) Aspirating Seals for application in aircraft engines. Stein Seal Co. will be fabricating the 36-inch seal(s) for testing. GE's task is to establish a thorough understanding of the operation of Aspirating Seals through analytical modeling and full-scale testing. The two primary objectives of this project are to develop the analytical models of the aspirating seal system, to upgrade using GE's funds, GE's 50-inch seal test rig for testing the Aspirating Seal (back-to-back with a corresponding brush seal), test the aspirating seal(s) for seal closure, tracking and maneuver transients (tilt) at operating pressures and temperatures, and validate the analytical model. The objective of the analytical model development is to evaluate the transient and steady-state dynamic performance characteristics of the seal designed by Stein. The transient dynamic model uses a multi-body system approach: the Stator, Seal face and the rotor are treated as individual bodies with relative degrees of freedom. Initially, the thirty-six springs are represented as a single one trying to keep open the aspirating face. Stops (Contact elements) are provided between the stator and the seal (to compensate the preload in the fully-open position) and between the rotor face and Seal face (to detect rub). The secondary seal is considered as part of the stator. The film's load, damping and stiffness characteristics as functions of pressure and clearance are evaluated using a separate (NASA) code GFACE. Initially, a laminar flow theory is used. Special two-dimensional interpolation routines are written to establish exact film load and damping values at each integration time step. Additionally, other user-routines are written to read-in actual pressure, rpm, stator-growth and rotor growth data and, later, to transfer these as appropriate loads/motions in the system-dynamic model. The transient dynamic model evaluates the various motions, clearances and forces as the seals are subjected to different aircraft maneuvers: Windmilling restart; start-ground idle; ground idle-takeoff; takeoff-burst chop, etc. Results of this model show that the seal closes appropriately and does not ram into the rotor for all of the conditions analyzed. The rig upgrade design for testing Aspirating Seals has been completed. Long lead-time items (forgings, etc.) have been ordered.

Bharat Bagepalli↗
NASA NTRS1995

Task Analytic Models to Guide Analysis and Design: Use of the Operator Function Model to Represent Pilot-Autoflight System Mode Problems

Task-analytic models structure essential information about operator interaction with complex systems, in this case pilot interaction with the autoflight system. Such models serve two purposes: (1) they allow researchers and practitioners to understand pilots' actions; and (2) they provide a compact, computational representation needed to design 'intelligent' aids, e.g., displays, assistants, and training systems. This paper demonstrates the use of the operator function model to trace the process of mode engagements while a pilot is controlling an aircraft via the, autoflight system. The operator function model is a normative and nondeterministic model of how a well-trained, well-motivated operator manages multiple concurrent activities for effective real-time control. For each function, the model links the pilot's actions with the required information. Using the operator function model, this paper describes several mode engagement scenarios. These scenarios were observed and documented during a field study that focused on mode engagements and mode transitions during normal line operations. Data including time, ATC clearances, altitude, system states, and active modes and sub-modes, engagement of modes, were recorded during sixty-six flights. Using these data, seven prototypical mode engagement scenarios were extracted. One scenario details the decision of the crew to disengage a fully automatic mode in favor of a semi-automatic mode, and the consequences of this action. Another describes a mode error involving updating aircraft speed following the engagement of a speed submode. Other scenarios detail mode confusion at various phases of the flight. This analysis uses the operator function model to identify three aspects of mode engagement: (1) the progress of pilot-aircraft-autoflight system interaction; (2) control/display information required to perform mode management activities; and (3) the potential cause(s) of mode confusion. The goal of this paper is twofold: (1) to demonstrate the use of the operator functio model methodology to describe pilot-system interaction while engaging modes And monitoring the system, and (2) to initiate a discussion of how task-analytic models might inform design processes. While the operator function model is only one type of task-analytic representation, the hypothesis of this paper is that some type of task analytic structure is a prerequisite for the design of effective human-automation interaction.

Degani, Asaf↗
NASA NTRS1980

Analytical modeling of battery cycle life

An analytical model related to the physical and chemical processes involved in battery wear and failure is discussed. The model is described using the data from the Crane tests.

Gross, S.↗
NASA NTRS1985

Automated dynamic analytical model improvement for damped structures

A method is described to improve a linear nonproportionally damped analytical model of a structure. The procedure finds the smallest changes in the analytical model such that the improved model matches the measured modal parameters. Features of the method are: (1) ability to properly treat complex valued modal parameters of a damped system; (2) applicability to realistically large structural models; and (3) computationally efficiency without involving eigensolutions and inversion of a large matrix.

Fuh, J. S.↗
NASA NTRS1981

Two-dimensional analytical model of twin jet shielding

Estimation of the impact of jet noise requires analytical modeling not only of the noise source mechanism, but also of the propagation of noise from the source to receiver. One factor which influences the jet noise path is shielding of one jet by another in a twin jet configuration. An analytical model is developed to investigate the shielding phenomenon. The two-dimensional wave equation is solved for a stationary line source impinging upon a cylinder of heated flow. The solution estimates the diffraction and scattering of the incident sound wave by the shielding jet in a plane normal to the jet axis. The frequency dependence of the normalized sound pressure estimated by the model is found to agree in form with empirical data. The azimuthal redistribution of the incident sound shows that, as the frequency of maximum shielding is approached, the scattered sound becomes more highly concentrated into lobes adjacent to the shielding zone.

Gerhold, C. H.↗
NASA NTRS1989

Analytical model of a five degree of freedom magnetic suspension and positioning system

An analytical model of a five degree of freedom magnetic suspension and positioning system is presented. The suspended element is a cylinder which is composed of permanent magnet material and the magnetic actuators are air core electromagnets mounted in a planar array. The analytical model consists of an open loop representation of the suspension and positioning system with electromagnet currents as inputs and displacements and rates in inertial coordinates as outputs. The uncontrolled degree of freedom is rotation about the long axis of the suspended cylinder.

Groom, Nelson J.↗
NASA NTRS1997

Simplified Analytical Model of a Six-Degree-of-Freedom Large-Gap Magnetic Suspension System

A simplified analytical model of a six-degree-of-freedom large-gap magnetic suspension system is presented. The suspended element is a cylindrical permanent magnet that is magnetized in a direction which is perpendicular to its axis of symmetry. The actuators are air core electromagnets mounted in a planar array. The analytical model consists of an open-loop representation of the magnetic suspension system with electromagnet currents as inputs.

Groom, Nelson J.↗
NASA NTRS1990

Comparison between analytical models and finite-difference simulations in transmission-line tap resistors and L-type cross-Kelvin resistors

Approximate analytical models of the transmission-line tap resistor and the cross-Kelvin resistor are compared with computer-simulated pseudo-three-dimensional resistor network models. The analytical formulas are in good agreement with the simulations over a useful range of parameters and are readily applied to the extraction of the contact resistivity and the sheet resistances of the semiconducting layer under and outside the contacts. The extraction procedure, which is easily implemented on a personal computer, is carried out for the case of alloyed AuGeNi/GaAs contacts, illustrating the importance of (1) distinguishing between layer sheet resistance under and outside the contacts and (2) considering two-dimensional current flow in the semiconducting layer.

Scorzoni, Andrea↗
NASA NTRS1982

Empirical testing of an analytical model predicting electrical isolation of photovoltaic models

A major design requirement for photovoltaic modules is that the encapsulation system be capable of withstanding large DC potentials without electrical breakdown. Presented is a simple analytical model which can be used to estimate material thickness to meet this requirement for a candidate encapsulation system or to predict the breakdown voltage of an existing module design. A series of electrical tests to verify the model are described in detail. The results of these verification tests confirmed the utility of the analytical model for preliminary design of photovoltaic modules.

Garcia, A., III↗
NASA NTRS1988

Development and experimental test of an analytical model of the orifice pulse tube refrigerator

An analytical model for the orifice pulse tube is developed, in which the system is described in terms of average enthalpy flow with such simplifying assumptions as an ideal gas and sinusoidal pressure variation. Phasor analysis is used to represent temperature, pressure, and mass-flow rate waves in vector form. The model predictions, namely, that the refrigeration power of a pulse-tube refrigerator is proportional to the average pressure, the pulse frequency, the mass-flow ratio, and the square of the dynamic pressure ratio, were verified by experimental measurements. It was found that, as a result of the simplifying assumptions, the magnitudes of the refrigeration power predicted by the model were between three and five times greater than experimental values.

Storch, Peter J.↗
NASA NTRS1985

Analytical modeling of circuit aerodynamics in the new NASA Lewis wind tunnel

Rehabilitation and extention of the capability of the altitude wind tunnel (AWT) was analyzed. The analytical modeling program involves the use of advanced axisymmetric and three dimensional viscous analyses to compute the flow through the various AWT components. Results for the analytical modeling of the high speed leg aerodynamics are presented; these include: an evaluation of the flow quality at the entrance to the test section, an investigation of the effects of test section bleed for different model blockages, and an examination of three dimensional effects in the diffuser due to reentry flow and due to the change in cross sectional shape of the exhaust scoop.

Towne, C. E.↗
NASA NTRS1975

Thermal analytical model of a 30 cm mercury ion thruster

A lumped parameter thermal nodal network has been developed for a 30 cm engineering model mercury ion thruster. The network consists of approximately 100 nodes coded in SINDA format for use on the Univac 1106/1108 computer. This model takes into account internal dissipation, radiation, and conduction as well as environmental heating. A series of tests were performed at NASA-Lewis Research Center to simulate a wide range of thermal environments on an operating 30 cm thruster, instrumented to measure the temperature distribution within the thruster. The results of these tests were used to calibrate the analytical model. Presented in this paper are a description of the analytical model along with comparisons between analytical and experimental results for the various operating conditions.

Oglebay, J. C.↗
NASA NTRS1985

Analytical modeling of circuit aerodynamics in the new NASA Lewis Altitude Wind Tunnel

Rehabilitation and extention of the capability of the altitude wind tunnel (AWT) was analyzed. The analytical modelling program involves the use of advanced axisymmetric and three dimensional viscous analyses to compute the flow through the various AWT components. Results for the analytical modelling of the high speed leg aerodynamics are presented; these include: an evaluation of the flow quality at the entrance to the test section, an investigation of the effects of test section bleed for different model blockages, and an examination of three dimensional effects in the diffuser due to reentry flow and due to the change in cross sectional shape of the exhaust scoop.

Towne, C. E.↗
NASA NTRS1974

Helicopter derivative identification from analytic models and flight test data

Recent results of stability derivative identification from helicopter analytic models and flight test data are presented. Six and nine degree-of-freedom (DOF) linear models are identified from an analytic nonlinear helicopter simulation using a least square technique. The identified models are compared with the convectional partial differentiation method for obtaining derivatives to form the basis for interpretation of derivatives identified from flight data. Six degree-of-freedom models are identified from CH-53A and CH-54B flight data, using an extended Kalman filter modified to process several maneuvers simultaneously. The a priori derivative estimate is obtained by optimal filtering of the data and then using a least square method. The results demonstrate that a six DOF identified model is sufficient to determine the low frequency modes of motion, but a nine DOF rotor/body model is necessary for proper representation of short-term response.

Molusis, J. H.↗
NASA NTRS1977

Analytic model approach to the inversion of scattering data

An analytic model approach is applied to several simple atmospheric inversion problems. This method gives a sharp determination of aerosol size distribution parameters. It is shown that this analytic approach, together with ground level point sampling data measurements, can be used to infer information on the tropospheric ozone profile.

Green, A. E. S.↗
NASA NTRS1988

Application of a Comprehensive Analytical Model of Rotor Aerodynamics and Dynamics (CAMRAD) to the McDonnell Douglas AH-64A helicopter

A model of the AH-64A helicopter was generated in a Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD) in an effort to validate its analytical capabilities for modeling a current advanced Army helicopter. The initial phase of the effort involved the generation of CAMRAD input files necessary for the complete aerodynamic, structural, and dynamic definition of the production AH-64A helicopter. The input files were checked by making comparisons of CAMRAD full helicopter trim and main rotor blade natural frequency predictions with those of full helicopter trim program, Blade Element Trim (BETRIM), and dynamic analysis code, Dynamic Analysis Research Tool (DART), respectively. The main thrust concerned the application of the AH-64A CAMRAD model thus developed and verified for main rotor blade structural loads predictions and comparison with DART analytical results. The investigation provided insight not only into the usefulness of CAMRAD for the AH-64A performance and dynamics prediction, but also into the limitations of the program for modeling advanced rotor and fuselage systems. The model development effort is discussed, the results of the CAMRAD correlation studies presented, and some general conclusions are offered on the applicability of CAMRAD for rotor aeroelastic loads prediction for current and future rotorcraft configurations.

Callahan, Cynthia B.↗
NASA NTRS1972

Analytic models of electron impact excitation cross sections.

A number of analytic forms are presented which have been used to represent electron impact excitation cross sections all the way from threshold to the high energy domain where they join approximately to the results of the Born-Bethe approximation. Techniques for estimating the parameters in these analytic forms are described in detail so that the reader can update his own parameter set when new experimental information becomes available. A short collection of parameters for excitations to key states of N2, O2 and O is given along with references to sources where more complete sets are available. The importance of analytic models as a means of communication to aeronomical users of cross sections is discussed.

Green, A. E. S.↗