Search NASA⌕ Search

SEARCH · Search NASA

Results for “Apparent consumption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Data Informed Vehicle Trip Energy Estimation [SWR-17-30]

There is a need to accurately estimate trip energy consumption for vehicle trips where high resolution GPS data is not available, or where the trips are simply proposed and have not been driven. This need is most apparent in green routing algorithms, it is critical to accurately estimate the energy consumption for a route that has not been driven. The Data Informed Energy Estimation Software addresses this need by identifying the driving and roadway attributes most impactful on fuel consumption, and using large amounts of high resolution GPS data from real world driving to determine the average fuel consumption for all combinations of attributes. These attributes can include traffic conditions, vehicle speed, and road gradient among others. This aggregation technique results in a lookup table that provides energy consumption values for combinations of road and driving techniques. This lookup table is an extremely lightweight and versatile result that can be applied in a number of applications.

Holden, Jacob↗

The Impact of Microtechnology on Space System Development

Microtechnology has the potential for a beneficial impact on both launch and space flight operations because of savings in mass, power consumption, volume and low cost manufacturing and testing. Less apparent, but equally valuable, are the advantages in reliability to be gained by increased redundancy and the reduction of complexity in the fabrication process. However, a successful program for the development and insertion of these technologies will need to consider the conservatism of the aerospace community. This is more true of government space programs where success is measured by a lack of launch failures and less true of commercial ventures where success may be measured by other criteria. This paper presents a strategy for evolving microtechnology in space systems that fits both the government's risk avoidance culture, and parallels the expected development of microtechnology applications in space systems.

Sutton, David G.↗

Characterization of a broadly specific cadaverine N-hydroxylase involved in desferrioxamine B biosynthesis in Streptomyces sviceus

N-hydroxylating flavin-dependent monooxygenases (FMOs) are involved in the biosynthesis of hydroxamate siderophores, playing a key role in microbial virulence. Herein, we report the first structural and kinetic characterization of a novel alkyl diamine N-hydroxylase DesB from Streptomyces sviceus (SsDesB). This enzyme catalyzes the first committed step in the biosynthesis of desferrioxamine B, a clinical drug used to treat iron overload disorders. X-ray crystal structures of the SsDesB holoenzyme with FAD and the ternary complex with bound NADP + were solved at 2.86 Å and 2.37 Å resolution, respectively, providing a structural view of the active site environment. SsDesB crystallized as a tetramer and the structure of the individual protomers closely resembles the structures of homologous N-hydroxylating FMOs from Erwinia amylovora (DfoA), Pseudomonas aeruginosa (PvdA), and Aspergillus fumigatus (SidA). Using NADPH oxidation, oxygen consumption, and product formation assays, kinetic parameters were determined for various substrates with SsDesB. SsDesB exhibited typical saturation kinetics with substrate inhibition at high concentrations of NAD(P)H as well as cadaverine. The apparent k cat values for NADPH in steady-state NADPH oxidation and oxygen consumption assays were 0.28 ± 0.01 s -1 and 0.24 ± 0.01 s -1 , respectively. However, in product formation assays used to measure the rate of N-hydroxylation, the apparent k cat for NADPH (0.034 ± 0.008 s -1 ) was almost 10-fold lower under saturating FAD and cadaverine concentrations, reflecting an uncoupled reaction, and the apparent NADPH K M was 33 ± 24 μM. Under saturating FAD and NADPH concentrations, the apparent k cat and K M for cadaverine in Csaky assays were 0.048 ± 0.004 s -1 and 19 ± 9 μM, respectively. SsDesB also N-hydroxylated putrescine, spermidine, and L-lysine substrates but not alkyl (di)amines that were branched or had fewer than four methylene units in an alkyl chain. These data demonstrate that SsDesB has wider substrate scope compared to other well-studied ornithine and lysine N-hydroxylases, making it an amenable biocatalyst for the production of desferrioxamine B, derivatives, and other N-substituted products.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of Zn accumulation and speciation in kernels of sweetcorn and maize differing in maturity

Abstract Background and Aims Understanding the speciation of Zn in edible portions of crops helps identify the most effective biofortification strategies to increase the supply of nutrients for improving the health and nutrition of consumers. Methods Kernels of 12 sweetcorn and three maize (Zea mays) varieties were analysed for Zn concentration and content. The speciation of the Zn in the embryos, endosperms and whole kernels at 21, 28 and 56 days after pollination (DAP) was then examined for one maize and one sweetcorn variety using synchrotron-based X-ray absorption spectroscopy (XAS). Key Results Averaged across all sweetcorn and maize varieties at 21 DAP, the embryo contributed 27–29% of the whole kernel Zn whilst the endosperm contributed 71–73 %. While sweetcorn embryos contributed a lower proportion to the total kernel Zn than those of maize, the proportion of total Zn in the embryo increased as kernels aged for both varieties, reaching 33 % for sweetcorn and 49% for maize at 28 DAP. Using XAS, it was predicted that an average of 90 % of the Zn in the embryos was present as Zn-phytate, while in the endosperm the Zn was primarily complexed with an N-containing ligand such as histidine and to a lesser extent with phytate. However, in maize endosperms, it was also observed that the proportion of Zn present as Zn-phytate increased as the kernel matured, thereby also probably decreasing its bioavailability in these mature maize kernels. Conclusions The apparent low bioavailability of Zn supplied in maize at its consumption stage (i.e. mature kernels) probably undermines the effectiveness of biofortification of this crop. Conversely, successful biofortification of Zn in sweetcorn and green maize consumed as immature kernels could potentially provide a good source of bioavailable Zn in human diets.

Cheah, Zhong Xiang↗

Final Dawn Reaction Control System (RCS) propulsion system in-flight characterization

The Dawn spacecraft concluded eleven years of operations on 31-Oct-2018, upon depletion of its hydrazine supply in Ceres orbit during the second extended mission. Dawn’s Reaction Control System performed admirably during this lengthy campaign, including years of unanticipated and novel operation given Reaction Wheel Assembly failures during flight. New and modified modes of thruster operations were implemented during the mission. Pressure transducer drift was negligible, consumable limits were generally not exceeded (except for minor violations in Reaction Control System thruster cycles), and thruster performance was nominal throughout this long interplanetary journey. Tank models of hydrazine remaining mass were consistent with depletion within uncertainties, although thruster consumption-based models ended up being conservative by 15%. Unexpectedly, apparent nitrogen permeation through the hydrazine tank elastomer diaphragm allowed hydrazine in the lines below the tank to be pressurized and subsequently utilized during the final days of the mission.

Mizukami, Masashi↗

Final Dawn Reaction Control System (RCS) propulsion system in-flight characterization

The Dawn spacecraft concluded eleven years of operations on 31-Oct-2018, upon depletion of its hydrazine supply in Ceres orbit during the second extended mission. Dawn’s Reaction Control System performed admirably during this lengthy campaign, including years of unanticipated and novel operation given Reaction Wheel Assembly failures during flight. New and modified modes of thruster operations were implemented during the mission. Pressure transducer drift was negligible, consumable limits were generally not exceeded (except for minor violations in Reaction Control System thruster cycles), and thruster performance was nominal throughout this long interplanetary journey. Tank models of hydrazine remaining mass were consistent with depletion within uncertainties, although thruster consumption-based models ended up being conservative by 15%. Unexpectedly, apparent nitrogen permeation through the hydrazine tank elastomer diaphragm allowed hydrazine in the lines below the tank to be pressurized and subsequently utilized during the final days of the mission.

Mizukami, Masashi↗

Effect of Delayed Energy Release on Power Normalization in Reactor Depletion Calculations

Reactor depletion calculations typically assume that the thermal power of the reactor is directly proportional to the instantaneous fission rate within the core. However, approximately 7% of the sensible energy released per fission comes from the radioactive decay of fission products, which occurs alter the fission event. Thus, the assumed direct relationship between reactor power and fission rate implies that all fission products have reached secular equilibrium within the core. In situations where fission product concentrations have not reached equilibrium (e.g., shortly after reactor startup or a change in reactor power during operation), the delayed energy release due to fission product decay creates a nonlinear relationship between reactor power and fission rate. This non-linear relationship, in turn, affects the neutron flux levels and fuel consumption rate required to maintain the desired thermal power output for the reactor. For example, during initial startup of a commercial light water reactor the apparent energy release per fission is ∼7{sup %} lower than the typical value of ∼200 MeV/fission due to the potential energy stored in radioactive fission products. As a consequence, the flux level (and, therefore, uranium consumption rate) in the reactor must be correspondingly higher to preserve the desired reactor power. As the reactor operates and fission product inventories increase, the decay heat produced by the reactor will rise, producing a corresponding increase in the apparent energy release per fission. The characteristic time-dependent behavior of energy release due to the decay of fission products (i.e., decay heat) following reactor startup, shutdown, or changes in reactor power is well-known and widely-used in reactor safety analyses. However, to our knowledge, the effects of time-dependent decay heating rates on reactor depletion calculations have not been thoroughly investigated. In this paper, we present a simple methodology for explicitly accounting for delayed energy release due to the decay of fission products in reactor depletion calculations. In the proposed method, the balance equations for fission product decay energy are incorporated into the depletion coefficient matrix, using a strategy similar to that described by Isotalo in 2016. The modified system of differential equations can be solved via a matrix exponential approximation (or other suitable numerical method) to yield solutions for both nuclide densities and decay energy emission densities as a function of time. Numerical results from the method are presented for simplified (one-group point (0-D) and 1-D) representations of a commercial pressurized water reactor (PWR), in order to estimate the effect of delayed energy release on fuel consumption and flux level immediately following reactor startup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of Lewis acidity of metal oxide promoters on the activity and selectivity of Co-based Fischer–Tropsch synthesis catalysts

Metal oxides of Ce, Gd, La, Mn, and Zr were investigated as promoters for improving the activity and selectivity of Co-based FTS catalysts. The extent to which these promoters decrease the selectivity toward CH 4 and increase the selectivity toward C 5+ hydrocarbons was found to depend on both the loading and the composition of the oxide promoter. Elemental mapping by STEM–EDS revealed that the propensity for a given metal oxide to associate with Co affects the sensitivity of the product distribution to changes in promoter loading. For all promoters, a sufficiently high loading resulted in the product distributions becoming insensitive to further increases in promoter loading, very likely due to the formation of a half monolayer of promoter oxide over the Co surface. Simulations suggest that the fraction of Co active sites that are adjacent to the promoter moieties approaches unity at this degree of coverage. The oxidation state of the promoter metal cation under reaction conditions, determined by in situ XANES measurements, was used to calculate relative Lewis acidity of the promoter metal cation. A strong positive correlation was found between the C 5+ product selectivity and the Lewis acidity of the promoter metal cations, suggesting that the promotional effects are a consequence of Lewis acid–base interactions between the reaction intermediates and the promoter metal cations. Rate data obtained at different pressures were used to estimate the apparent rate coefficient and the CO adsorption constant appearing in the Langmuir–Hinshelwood expression that describes the CO consumption kinetics for both unpromoted and the metal oxide-promoted catalysts. Both parameters exhibited positive correlations with the promoter Lewis acidity. In conclusion, these results are consistent with the hypothesis that the metal cations of the promoter act as Lewis acids that interact with the O atom of adsorbed CO to facilitate CO adsorption and dissociation.

Johnson, Gregory R.↗

Oxy-combustion of pulverized coal : modeling of char combustion kinetics.

In this study, char combustion of pulverized coal under oxy-fuel combustion conditions was investigated on the basis of experimentally observed temperature-size characteristics and corresponding predictions of numerical simulations. Using a combustion-driven entrained flow reactor equipped with an optical particle-sizing pyrometer, combustion characteristics (particle temperatures and apparent size) of pulverized coal char particles was determined for combustion in both reduced oxygen and oxygen-enriched atmospheres with either a N{sub 2} or CO{sub 2} bath gas. The two coals investigated were a low-sulfur, high-volatile bituminous coal (Utah Skyline) and a low-sulfur subbituminous coal (North Antelope), both size-classified to 75-106 {micro}m. A particular focus of this study lies in the analysis of the predictive modeling capabilities of simplified models that capture char combustion characteristics but exhibit the lowest possible complexity and thus facilitate incorporation in existing computational fluid dynamics (CFD) simulation codes. For this purpose, char consumption characteristics were calculated for char particles in the size range 10-200 {micro}m using (1) single-film, apparent kinetic models with a chemically 'frozen' boundary layer, and (2) a reacting porous particle model with detailed gas-phase kinetics and three separate heterogeneous reaction mechanisms of char-oxidation and gasification. A comparison of model results with experimental data suggests that single-film models with reaction orders between 0.5 and 1 with respect to the surface oxygen partial pressure may be capable of adequately predicting the temperature-size characteristics of char consumption, provided heterogeneous (steam and CO{sub 2}) gasification reactions are accounted for.

01 COAL, LIGNITE, AND PEAT↗

Oxy-combustion of pulverized coal : modeling of char-combustion kinetics.

In this study, char combustion of pulverized coal under oxy-fuel combustion conditions was investigated on the basis of experimentally observed temperature-size characteristics and corresponding predictions of numerical simulations. Using a combustion-driven entrained flow reactor equipped with an optical particle-sizing pyrometer, combustion characteristics (particle temperatures and apparent size) of pulverized coal char particles was determined for combustion in both reduced oxygen and oxygen-enriched atmospheres with either a N{sub 2} or CO{sub 2} bath gas. The two coals investigated were a low-sulfur, high-volatile bituminous coal (Utah Skyline) and a low-sulfur subbituminous coal (North Antelope), both size-classified to 75-106 {micro}m. A particular focus of this study lies in the analysis of the predictive modeling capabilities of simplified models that capture char combustion characteristics but exhibit the lowest possible complexity and thus facilitate incorporation in existing computational fluid dynamics (CFD) simulation codes. For this purpose, char consumption characteristics were calculated for char particles in the size range 10-200 {micro}m using (1) single-film, apparent kinetic models with a chemically 'frozen' boundary layer, and (2) a reacting porous particle model with detailed gas-phase kinetics and three separate heterogeneous reaction mechanisms of char-oxidation and gasification. A comparison of model results with experimental data suggests that single-film models with reaction orders between 0.5 and 1 with respect to the surface oxygen partial pressure may be capable of adequately predicting the temperature-size characteristics of char consumption, provided heterogeneous (steam and CO{sub 2}) gasification reactions are accounted for.

01 COAL, LIGNITE, AND PEAT↗

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2010)

The 2010 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2007. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2007 were published earlier (Boden et al. 2010). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2011)

The 2011 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2008. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2008 were published earlier (Boden et al. 2011). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2012)

The 2012 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2009. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2009 were published earlier (Boden et al. 2012). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2013)

The 2013 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2010. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2010 were published earlier (Boden et al. 2013). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2015)

The 2015 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2011. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2011 were published earlier (Boden et al. 2015). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗

Changing food nitrogen flow in a food-exporting city

Introduction Nitrogen (N) plays a significant role in food systems, but only a fraction of N is effectively utilized and the rest is lost to the environment and negatively affects the ecosystem. So far, there has been relatively little research on N flow associated with the food production and consumption of production-oriented cities in developing countries. Methods In this study, we present a comprehensive analysis of N flow in the food production and consumption system of Changchun in China between 1991 and 2014, and define three types of nitrogen use efficiency (NUE) and compare them. Results (1) Total new N input into the food system in Changchun increased by 63.75% (240.8 to 394.3 Gg N yr −1 ) during the study period, mainly attributable to the high volume of food exports(total output from 47.63 to 72.51 Gg N yr −1 ). (2) Changchun typically exhibited lower apparent NUE and virtual NUE of the food system, while its actual NUE was typically higher, compared to food-importing cities. (3) The consumption of crop food witnessed a decrease from 24.2 Gg N in 1991 to 18.7 Gg N in 2014, whereas the consumption of animal food showed an upward trend from 2.5 Gg N to 7.7 Gg N. Both urban and rural residents consumed less grain food but more fruits and meat. (4) The total N loss has increased from 131.3 Gg N in 1991 to 266.6 Gg N in 2014. The crop production caused 58.1% of the total N loss in 2014, and the atmospheric loss accounted for 40.2% of the total. Conclusion The study has revealed the distinctive features, fluctuations, and underlying drivers of N flow in the food-exporting city, setting it apart from food-importing city. These findings provide a valuable point of reference for the implementation of customized and diversified nitrogen management strategies in these specific urban areas.

Huang, Wei↗

Pore-scale simulation of microbial growth using a genome-scale metabolic model: Implications for Darcy-scale reactive transport

Recent advances in microbiology have enabled the quantitative simulation of microbial metabolism and growth based on genome-scale characterization of metabolic pathways and fluxes. We have incorporated a genome-scale metabolic model of the iron-reducing bacteria Geobacter sulfurreducens into a pore-scale simulation of microbial growth based on coupling of iron reduction to oxidation of a soluble electron donor (acetate). In our model, fluid flow and solute transport is governed by a combination of the Navier-Stokes and advection-diffusion-reaction equations. Microbial growth occurs only on the surface of soil grains where solid-phase mineral iron oxides are available. Mass fluxes of chemical species associated with microbial growth are described by the genome-scale microbial model, implemented using a constraint-based metabolic model, and provide the Robin-type boundary condition for the advection-diffusion equation at soil grain surfaces. Conventional models of microbially-mediated subsurface reactions use a lumped reaction model that does not consider individual microbial reaction pathways, and describe reactions rates using empirically-derived rate formulations such as the Monod-type kinetics. We have used our pore-scale model to explore the relationship between genome-scale metabolic models and Monod-type formulations, and to assess the manifestation of pore-scale variability (microenvironments) in terms of apparent Darcy-scale microbial reaction rates. The genome-scale model predicted lower biomass yield, and different stoichiometry for iron consumption, in comparisonto prior Monod formulations based on energetics considerations. We were able to fit an equivalent Monod model, by modifying the reaction stoichiometry and biomass yield coefficient, that could effectively match results of the genome-scale simulation of microbial behaviors under excess nutrient conditions, but predictions of the fitted Monod model deviated from those of the genome-scale model under conditions in which one or more nutrients were limiting. The fitted Monod kinetic model was also applied at the Darcy scale; that is, to simulate average reaction processes at the scale of the entire pore-scale model domain. As we expected, even under excess nutrient conditions for which the Monod and genome-scale models predicted equal reaction rates at the pore scale, the Monod model over-predicted the rates of biomass growth and iron and acetate utilization when applied at the Darcy scale. This discrepancy is caused by an inherent assumption of perfect mixing over the Darcy-scale domain, which is clearly violated in the pore-scale models. These results help to explain the need to modify the flux constraint parameters in order to match observations in previous applications of the genome-scale model at larger scales. These results also motivate further investigation of quantitative multi-scale relationships between fundamental behavior at the pore scale (where genome-scale models are appropriately applied) and observed behavior at larger scales (where predictions of reactive transport phenomena are needed).

bioremediation↗

Resolving Anodic Current and Temperature Distributions in a Polymer Electrolyte Membrane Water Electrolysis Cell Using a Pseudo-Two-Phase Computational Fluid Dynamics Model

Expanding upon our prior experimental work, we constructed a three-dimensional model of a polymer electrolyte membrane water electrolyzer using computational fluid dynamics. We applied the assumption of pseudo-two-phase flow, the flow of two phases with equal velocity. Experimental data were used to obtain parameters and to determine the conditions under which this model was valid. Anodic distributions of current density, temperature, liquid saturation, and relative humidity were obtained at various flow rates. The overall current density and temperature difference from inlet to outlet at the anode agreed strongly with experimental measurements under most circumstances. This verification allowed us to further examine the apparent gas coverage calculated from experimental and model temperature data. Results suggested a low liquid saturation and low relative humidity at the anode due to the consumption of liquid water and water vapor. However, we questioned the accuracy of the pseudo-two-phase assumption at low water feed rates. We concluded that the model was applicable to systems with liquid water feed rates greater than 0.6 ml min -1 cm -2 . Therefore, it is a fair screening method that can advise which operating conditions lead to excessive temperatures or drying at the anode, thereby promoting the longevity of the membrane and catalyst.

25 ENERGY STORAGE↗