Search NASA⌕ Search

SEARCH · Search NASA

Results for “Asteroids, surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Meteorite spectroscopy and characterization of asteroid surface materials

The analysis of visible and near-infrared reflectance spectra is the primary means to determine surface mineralogy and petrology of individual asteroids. These individual studies provide the data to investigate the broader relationships between the asteroids and meteorites and between asteroids at different heliocentric distances. The main purpose is to improve the understanding of the origin, evolution, and inter-relationships of the asteroids; of their relationships to the meteorites; and of the processes active and the conditions present in the early inner solar system. Empirical information from the study of asteroids and the meteorites is essential to the adequate development and testing of the theoretical models for the accretion of the terrestrial planets, and for their early post-accretionary evolution. The recent results are outined in the following sections: (1) asteroid igneous processes, and (2) spinel-bearing asteroids and the nebular compositional gradient.

Gaffey, Michael J.↗
NASA NTRS2004

Samples of Asteroid Surface Ponded Deposits in Chondritic Meteorites

One of the many unexpected observations of asteroid 433 Eros by the Near Earth Asteroid Rendezvous (NEAR) mission was the many ponds of fine-grained materials [1-3]. The ponds have smooth surfaces, and define equipotential surfaces up to 10's of meters in diameter [4]. The ponds have a uniformly sub-cm grain size and appear to be cohesive or indurated to some degree, as revealed by slumping. The ponds appear to be concentrated within 30 degrees of the equator of Eros, where gravity is lowest. There is some insight into the mineralogy and composition of the ponds surfaces from NEAR spectroscopy [2,4,5,6]. Compared to the bulk asteroid, ponds: (1) are distinctly bluer (high 550/760 nm ratio), (2) have a deeper 1um mafic band, (3) have reflectance elevated by 5%.

Zolensky, M. E.↗
NASA NTRS2004

The Seismic Effect of Impacts on Asteroid Surface Morphology: Early Modeling Results

In recent years, spacecraft observations of asteroids 951 Gaspra, 243 Ida, 253 Mathilde, and 433 Eros have shown the overriding dominance of impact processes with regard to the structure and appearance of these small, irregular bodies. One currently unanswered question is: to what degree does seismic shaking from impacts affect the surface morphology of these bodies? Through detailed modeling, we begin to address this question.

Richardson, J. E.↗
NASA NTRS1993

Determining the composition of olivine on asteroidal surfaces

Olivine was remotely identified as a major component on many S- and A-type asteroids based on qualitative analyses of broad absorption features near 1.0 micron in their telescopic reflectance spectra. Laboratory studies showed that this diagnostic olivine absorption feature is composed of three individual absorption bands resulting from electronic transitions of Fe(+2) in distorted M1 and M2 sites. Both the overall absorption feature and each of the individual absorption bands are also known to vary systematically as a function of olivine composition. Thus, it should be possible to remotely determine the composition of olivine present on the surfaces of the various olivine-rich asteroids. However, extrapolation of laboratory studies to compositional interpretation of asteroid spectra is complicated by several factors: observational noise; lower spectral resolution; compositional heterogeneities (including the presence of other phases such as pyroxenes and/or metal); and the effects of alteration processes. In order to address such complex problems, a quantitative approach to spectral analysis, the modified Gaussian model (MGM) was developed by Sunshine et al., which deconvolves spectra into their constituent absorption bands. The MGM, a refinement of the Gaussian model, more accurately adheres to the physical processes involved in electronic transition absorptions. Under the MGM, each spectrum is modeled in log reflectance and energy as a sum of absorption bands superimposed onto a baseline or continuum. Each absorption band is described by three model parameters (center, width, and strength) which can be interpreted and used to infer composition. One of the strengths of the MGM is that it allows compositional information to be extracted directly from measured spectra and is therefore complementary to other approaches to modeling asteroid spectra which require the use of meteorites and/or terrestrial samples as spectral analogs. A quantitative understanding of the properties of olivine absorptions was established by using the MGM to analyze a laboratory suite of spectra spanning a full range of olivine compositions.

Sunshine, Jessica M.↗
NASA NTRS2011

Howardite Noble Gases as Indicators of Asteroid Surface Processing

The HED (Howardite, Eucrite and Diogenite) group meteorites likely or iginate from the Asteroid 4 Vesta - one of two asteroid targets of NA SA's Dawn mission. Whilst Howardites are polymict breccias of eucriti c and diogenitic material that often contain "regolithic" petrologica l features, neither their exact regolithic nature nor their formation processes are well defined. As the Solar Wind (SW) noble gas compon ent is implanted onto surfaces of solar system bodies, noble gas anal yses of Howardites provides a key indicator of regolithic origin. In addition to SW, previous work by suggested that restricted Ni (300-12 00 micro g/g) and Al2O3 (8-9 wt%) contents may indicate an ancient we ll-mixed regolith. Our research combines petrological, compositional and noble gas analyses to help improve understanding of asteroid reg olith formation processes, which will play an intergral part in the i nterpretation of Dawn mission data. Following compositional and petrological analyses, we developed a regolith grading scheme for our sampl e set of 30 Howardites and polymict Eucrites. In order to test the r egolith indicators suggested by, our 8 selected samples exhibited a r ange of Ni, Al2O3 contents and regolithic grades. Noble gas analyses were performed using furnace stepheating on our MAP 215-50 noble gas mass spectrometer. Of our 8 howardites, only 3 showed evidence of SW noble gases (e.g approaching Ne-20/Ne-22 approximately equals 13.75, Ne-21/Ne-22 approximately equals 0.033). As these samples display low regolithic grades and a range of Ni and Al2O3 contents, so far we are unable to find any correlation between these indicators and "regolit hic" origin. These results have a number of implications for both Ho wardite and Vesta formation, and may suggest complex surface stratigr aphies and surface-gardening processes.

Cartwright, J. A.↗
NASA NTRS1987

Meteorite spectroscopy and characterization of asteroid surface materials

The purpose of this research effort is to improve the understanding of the origin, evolution, and interrelationships of the asteroids; of their relationships to the meteorites; and of the conditions and processes in the early inner solar system. The surface mineral assemblage and the surface heterogeneity of selected minor planets is determined from analysis of telescopic spectra to provide the data base to accomplish these goals. The analysis of asteroidal visible and near-infrared (VNIR) reflectance spectra compliments meteorite studies as a means of probing the late nebular through the early post-accretionary period of solar system history. To date, essentially all available spectral evidence has strongly indicated that the large S-type asteroids are predominantly thermally evolved, magmatically differentiated bodies.

Gaffey, Michael J.↗
NASA NTRS1989

Physical characterization of asteroid surfaces from photometric analysis

The feasibility of using photometric models like Hapke's (1981, 1984, 1986) equation for deriving physical properties of asteroids from photometric observations is discussed. Using data for Ceres and Vesta, it is shown that the incomplete phase-angle coverage limits the reliable determination of Hapke's photometric parameters from asteroid disk-integrated phase curves (the second limitation is the nonsphericity of many asteroids). However, within this limitations, certain trends among asteroids can be compared. It is shown that there is a general similarity among the Hapke's parameters other than the h parameter, which characterizes the width of the opposition surge in terms of soil structure (porosity, particle-size distribution, and the rate of compaction with depth), derived for similar objects, e.g., average C asteroids and Ceres, and average S asteroids, 1982 Apollo, and Vesta.

Helfenstein, P.↗
NASA NTRS2005

Negative Searches for Evidence of Aqueous Alteration on Asteroid Surfaces

Small bodies in the Solar System preserve evidence of the processes occurring during early Solar System formation, unlike the larger planets that undergo continuous churning of their surfaces. We study these bodies to understand what processes affected different stages of Solar System formation. The action of aqueous alteration (the alteration of material by the interaction of that material with liquid formed by the melting of incorporated ice) of near-subsurface material has been inferred to occur on many asteroids based on the spectrophotometric evidence of phyllosilicates and iron alteration minerals. The definitive indication of aqueous alteration is the 3.0- micron absorption feature attributed to structural hydroxyl (OH) and interlayer and adsorbed water (H2O) in phyllosilicates (clays) (hereafter water of hydration). A weak absorption feature centered near 0.7 microns attributed to an Fe (2+) right arrow Fe (3+) charge transfer transition in oxidized iron in phyllosilicates has been observed in the reflectance spectra and photometry of approximately 50% of the main-belt C-class asteroids. An approximately 85% correlation between this 0.7- micron feature and the 3.0- micron water of hydration absorption feature was found among the low-albedo asteroids. The feature is usually centered near 0.68 microns in asteroid spectra, and ranges in wavelength from approximately 0.57 to 0.83 microns. Serendipitously, three of the Eight Color Asteroid Survey filters the v (0.550 microns), w (0.701 microns), and x (0.853 microns)-bracket this feature well, and can be used to determine the presence of this feature in the reflectance properties of an asteroid, and probe the aqueous alteration history of larger samples of asteroid data. Two efforts to search for evidence of aqueous alteration based on the presence of this 0.7- micron absorption feature are presented here.

Vilas, F.↗
NASA NTRS2012

Collisional Processing of Comet and Asteroid Surfaces: Velocity Effects on Absorption Spectra

A new paradigm has emerged where 3.9 Gyr ago, a violent reshuffling reshaped the placement of small bodies in the solar system (the Nice model). Surface properties of these objects may have been affected by collisions caused by this event, and by collisions with other small bodies since their emplacement. These impacts affect the spectrographic observations of these bodies today. Shock effects (e.g., planar dislocations) manifest in minerals allowing astronomers to better understand geophysical impact processing that has occurred on small bodies. At the Experimental Impact Laboratory at NASA Johnson Space Center, we have impacted forsterite and enstatite across a range of velocities. We find that the amount of spectral variation, absorption wavelength, and full width half maximum of the absorbance peaks vary non-linearly with the velocity of the impact. We also find that the spectral variation increases with decreasing crystal size (single solid rock versus granular). Future analyses include quantification of the spectral changes with different impactor densities, temperature, and additional impact velocities. Results on diopside, fayalite, and magnesite can be found in Lederer et al., this meeting.

Lederer, S. M.↗
NASA NTRS1985

Surfaces of Asteroids and Cometary Nuclei

The types of landforms and processes that may exist on cometary nuclei and asteroidal surfaces are investigated. Acknowledging that some asteroids may be cometary nuclei in disguise, asteroids are treated in this report as a simpler case than comets, owing to their more limited response to the state environment. Larger bodies (D 100 km) will not be discussed, even though they are recognized to be extremely important. This limitation permits only processes depending on exogenic phenomena to be considered (excluding processes such as volcanism on Vesta, for example), thus focusing discussion on the more unique aspects of these bodies, namely, their size and number.

Malin, M. C.↗
NASA NTRS1999

Investigating Atmospheric Effects on Impact Ejecta Morphology: Possible Tool for Determining Past Climate Conditions on Mars?

The combined use of impact crater morphology and mechanics provides important information on the physical conditions of both planetary atmospheres and planetary and asteroid surfaces present during crater formation, while an understanding of the rate of crater production on the surface of asteroids provides information of their surface and spin rate evolution. The research performed with support from this project improves our understanding of (1) the mechanics of impact cratering in order to gain insights on the evolution of these physical surface conditions on planets with atmospheres and asteroids, and (2) how impact flux across an asteroid surface may vary due to anisotropic distribution of impactors in the solar system. As part of this project, we have undertaken three studies. In the first study, we investigate atmospheric effects on the morphology of ejecta excavated during a cratering event in order to determine the atmospheric and target conditions from observed crater morphologies. In the second study, we use the physical and morphological consequences of oblique impacts on an asteroid to understand how the asteroid Mathilde (recently imaged by the Near Earth Asteroid Rendezvous - NEAR- spacecraft) could have survived the formation of five giant craters. In a third study, we use a Monte Carlo method to calculate the impact flux on an asteroid given a distribution of impactors on elliptical orbits. In the following section, we present the result obtained from all three studies.

Appleby, John F.↗
NASA NTRS2017

Osiris-REx Spacecraft Current Status and Forward Plans

The NASA New Frontiers OSIRIS-REx spacecraft executed a flawless launch on September 8, 2016 to begin its 23-month journey to near-Earth asteroid (101955). The primary objective of the OSIRIS-REx mission is to collect and return to Earth a pristine sample of regolith from the asteroid surface. The sampling event will occur after a two-year period of remote sensing that will ensure a high probability of successful sampling of a region on the asteroid surface having high science value and within well-defined geological context. The OSIRIS-REx instrument payload includes three high-resolution cameras (OCAMS), a visible and near-infrared spectrometer (OVIRS), a thermal imaging spectrometer (OTES), an X-ray imaging spectrometer (REXIS), and a laser altimeter (OLA). As the spacecraft follows its nominal outbound-cruise trajectory, the propulsion, power, communications, and science instruments have undergone basic functional tests, with no major issues. Outbound cruise science investigations include a search for Earth Trojan asteroids as the spacecraft approaches the Sun-Earth L4 Lagrangian point in February 2017. Additional instrument checkouts and calibrations will be carried out during the Earth gravity assist maneuver in September 2017. During the Earth-moon flyby, visual and spectral images will be acquired to validate instrument command sequences planned for Bennu remote sensing. The asteroid Bennu remote sensing campaign will yield high resolution maps of the temperature and thermal inertia, distributions of major minerals and concentrations of organic matter across the asteroid surface. A high resolution 3d shape model including local surface slopes and a high-resolution gravity field will also be determined. Together, these data will be used to generate four separate maps that will be used to select the sampling site(s). The Safety map will identify hazardous and safe operational regions on the asteroid surface. The Deliverability map will quantify the accuracy with which the navigation team can deliver the spacecraft to and from specific sites on the asteroid surface. The Sampleability map quantifies the regolith properties, providing an estimation of how much material would be sampled at different points on the surface. The final Science Value map synthesizes the chemical, mineralogical, and geological, observations to identify the areas of the asteroid surface with the highest science value. Here, priority is given to organic, water-rich regions that have been minimally altered by surface processes. Asteroid surface samples will be acquired with a touch-and-go sample acquisition system (TAGSAM) that uses high purity pressurized N2 gas to mobilize regolith into a stainless steel canister. Although the mission requirement is to collect at least 60 g of material, tests of the TAGSAM routinely exceeded 300 g of simulant in micro-gravity tests. After acquiring the sample, the spacecraft will depart Bennu in 2021 to begin its return journey, with the sample return capsule landing at the Utah Test and Training Range on September 23, 2023. The OSIRIS-REx science team will carry out a series of detailed chemical, mineralogical, isotopic, and spectral studies that will be used to determine the origin and history of Bennu and to relate high spatial resolution sample studies to the global geological context from remote sensing. The outline of the sample analysis plan is described in a companion abstract.

Messenger, Scott↗
NASA NTRS2011

Assessing the Age of an Asteroid's Surface with Data from the International Rosetta Mission

Rosetta is an international mission led by the European Space Agency (ESA) with key support and instrumentation from the National Aeronautics and Space Administration (NASA). Rosetta is currently on a ten-year mission to catch comet 67P/Churyumov-Gerasimenko (C-G); throughout its voyage, the spacecraft has performed flybys of two main belt asteroids (MBA): Steins and Lutetia. Data on the physical, chemical, and geological properties of these asteroids are currently being processed and analyzed. Accurate interpretation of such data is fundamental in the success of Rosetta's mission and overall objectives. Post-flyby data analyses strive to correlate the size, shape, volume, and rotational rate of Lutetia, in addition to interpreting its multi-color imagining, albedo, and spectral mapping. Although advancements in science have contributed to the examination of celestial bodies, methods to analyze asteroids remain largely empirical, not semi-empirical, nor ab initio. This study aims to interpret and document the scientific methods currently utilized in the characterization of asteroid (21) Lutetia in order to render these processes and methods accessible to the public. Examples include a standardized technique for assessing the age of an asteroid surface, complete with clickable reference maps, methodology of grouping surface characteristics together, and a standardized power law equation for the age. Other examples include determining the density of an object. Context for what both density and age mean is a bi-product of this study. Results of the study will aid in the development of pedagogical material on asteroids for public use, and in creation of an academic database for selected targets that might be used as a reference.

asteriods↗
NASA NTRS1989

Dark surfaces of asteroids and comets - Evidence for macromolecular carbon compounds

The presence of very low-albedo material on the surfaces of some classes of asteroids (C,P,D) and most comets appears to be related to macromolecular carbon compounds on these bodies. Preliminary detections of an organic spectral signature have been reported for some asteroids. The complex refractory organics that occur in some meteorites are probably the material that makes low-albedo asteroids dark. Comet surfaces and ejected dust particles are also very low albedo, apparently resulting from the radiation processing of organic ices.

Cruikshank, D. P.↗
NASA NTRS2014

Studies of Itokawa's Surface Exposure by Measurements of Cosmic-ray Produced Nuclides

We plan to investigate the evolutionary history of surface materials from 25143 Itokawa, the Hayabusa samples. Our studies are based on the measurement of nuclides produced in asteroidal surface materials by cosmic rays. Cosmogenic radionuclides are used to determine the duration and nature of the exposure of materials to energetic particles. Our goals are to understand both the fundamental processes on the asteroidal surface and the evolutionary history of its surface materials. They are also key to understanding the history of Itokawa's surface and asteroid-meteoroid evolutionary dynamics. To achieve our key goals, in particular reconstructing the evolutionary histories of the asteroidal surface, we proposed: (1) characterizing Itokawa particles using SXCT, SXRD, and FE-SEM without modification of the sample; (2) embedding each particle in acrylic resin, then slicing a small corner with an ultra-microtome and examining it using super-STEM and SIMS for characterizing surface morphology, space weathering, and oxygen three-isotope analysis; and finally (3) measuring small amounts of cosmogenic radionuclides (104-105 atoms) in Hayabusa samples by AMS. However, we have to modify our plan due to unexpected situation.

Caffee, M. W.↗
NASA NTRS2020

Variations in color and reflectance on the surface of asteroid (101955) Bennu

Visible-wavelength color and reflectance provide information about the geologic history of planetary surfaces. Here we present multispectral images (0.44 to 0.89 micrometers) of near-Earth asteroid (101955) Bennu. The surface has variable colors overlain on a moderately blue global terrain. Two primary boulder types are distinguishable by their reflectance and texture. Space weathering of Bennu surface materials does not simply progress from red to blue (or vice versa). Instead, freshly exposed, redder surfaces initially brighten in the near-ultraviolet region (i.e., become bluer at shorter wavelengths), then brighten in the visible to near-infrared region, leading to Bennu’s moderately blue average color. Craters indicate that the time scale of these color changes is ~105 years. We attribute the reflectance and color variation to a combination of primordial heterogeneity and varying exposure ages.

D. N. DellaGiustina↗
NASA NTRS2004

Penetrator Coring Apparatus for Cometary Surfaces

Touch and go impact coring is an attractive technique for sampling cometary nuclei and asteroidal surface on account of the uncertain strength properties and low surface gravities of these objects. Initial coring experiments in low temperature (approx. 153K polycrystalline ice) and porous rock demonstrate that simultaneous with impact coring, measurements of both the penetration strength and constraints on the frictional properties of surface materials can be obtained upon core penetration and core sample extraction. The method of sampling an asteroid, to be deployed, on the now launched MUSES-C mission, employs a small gun device that fires into the asteroid and the resulted impact ejecta is collected for return to Earth. This technique is well suited for initial sampling in a very low gravity environment and deployment depends little on asteroid surface mechanical properties. Since both asteroids and comets are believed to have altered surface properties a simple sampling apparatus that preserves stratigraphic information, such as impact coring is an attractive alternate to impact ejecta collection.

Braun, David F.↗