SEARCH · Search NASA

Results for “Atmospheric Emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Recovery of Natural Gas Equipment Emissions into Gas Compression Engines for the Reduction of Potential Greenhouse Gas Emissions

Since the turn of the millennium, the United States (U.S.) oil and natural gas (ONG) industry has nearly doubled its natural gas production rate. As a result, the ONG industry has recently come under increasing scrutiny for its contributions to greenhouse gas (GHG) emissions. Consequently, various solutions to this problem have been proposed and formulated to reduce the impacts of GHG emissions on the environment. West Virginia University (WVU) have found it important to research the impacts of recovering vented gas streams into prime-mover engines. The U.S. Department of Energy (DOE) and National Energy Technology Laboratory (NETL) have granted WVU funding to research and develop a “Methane Mitigator” (M2) - a “Scalable Vent Mitigation Strategy to Simultaneously Reduce Methane Emissions and Fuel Consumption from the Compression Industry.” One of the main areas of interest for this research was the collection of emissions from natural gas equipment into a Caterpillar G3508J natural gas compression engine. The parameters being analyzed from the engine were brake-specific emissions and power output. The emissions sources considered for this research were pneumatic controllers (PCs), reciprocating compressor vents, and the engine’s open crankcase breather. The compressor vent and PC emissions were simulated using a mass flow controller (MFC) and flowed into the engine using two separate methods: (1) directly into the air intake, and (2) through a retrofitted closed crankcase ventilation system (CCV), serving as a buffer volume. The crankcase emissions were quantified without the CCV, and the impact on exhaust emissions from circulating the crankcase gases into the intake was measured. The simulated compressor vent and PC flows from the MFC had limited effect on the steady state operation of the engine and resulting performance. When the simulated flows were fed directly into the engine’s air intake, the changes within the engine’s continuous performance and emission parameters were larger but lasted for shorter durations. Conversely, when the simulated flows were fed into the CCV before entering the air intake, the changes in the engine’s performance and emission parameters were less pronounced for continuous analysis but lasted for longer durations. In either case, the continuous emission changes in both emissions and performance varied in size depending on the test scenario being run, but the cycle average changes in emissions and performance showed little impact overall compared to the engine’s baseline operation. As a result, the inclusion of a CCV shows a decrease in baseline carbon dioxide equivalent (CO2-eq.) engine emissions (from combined exhaust and open crankcase) of almost 4%. Likewise, the CCV inclusion reduced baseline total methane (CH4) from combined exhaust and open crankcase by upwards of 16%. These atmospheric emissions only decreased further with the inclusions of collected PC and compressor vent flows. The resulting changes in time-averaged rated exhaust behavior (or lack thereof) prove that the proposed M2 system could likely be deployed at sites with modern lean-burn natural gas engines as a viable option for reducing and eliminating potential GHG sources that would have otherwise been unutilized as energy sources.

03 NATURAL GAS↗

DOE OSTI2025

SPRUCE Methane Transport in Plants at S1 Bog, Marcell Experimental Forest, Minnesota, 2017-2019

This data set contains measurements of methane (CH4) transport by plants (both ground-layer and trees) and diffusion, as well as whole-plot emissions, taken in September 2018 and June 2019 in S1 Bog outside of the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experimental enclosures. Additionally, CH4 and carbon dioxide (CO2) stable isotope data in porewater and atmospheric emissions were taken in July 2017 in the SPRUCE enclosures to explore the relative magnitude of CH4 oxidation. Episodic ebullition rates for S1 Bog are taken from Gill et al. (2017). Methane transport is an important component of many ecosystem models of peatlands. The results were compared to two methane models that have been developed for the SPRUCE project, ELM-SPRUCE (Earth Land Model) and TECO_SPRUCE (Terrestrial ECOsystem model). This dataset contains six data files in comma separate (.csv) format. Additional metadata are provided: six data dictionaries and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Microanalysis of Primary Biological Particles from Model Grass over Its Life Cycle

Airborne biological aerosols are an integral part of the atmosphere–biosphere interface and significantly impact the environment and Earth’s climate. Primary biological particles such as fungal spores, bacteria, and fragments of plant debris are emitted directly from the biosphere into the atmosphere. The phyllosphere (aboveground plant surfaces) is one of the major habitats for different microbes. Here, atmospheric emissions of primary biological particles from model grass Brachypodium distachyon were monitored by online particle number concentration counting at eight principal growth stages starting from leaf development to senescence. Particles collected at each of the growth stages were then characterized using microspectroscopy techniques. Our findings indicate that the morphological and compositional characteristics of emitted biological particles are highly variable at the different growth stages. We identified fungal spores as the most abundant biological particles in the heading stage, while bacteria were most abundant in the flowering and fruit development stages. Understanding differences in the composition and morphology of biological particles during the plant life cycle provides more accurate and reliable insights on structural, functional, and biochemical properties of plant systems, as well as their interactions with microbial communities. This study also provides insights into Earth geoscience system models that represent primary biological particle emissions from the biosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Agricultural Impacts on Nitrogen Cycling: Climate and Air Pollution (Final Technical Report)

We have successfully added a parameterization of ammonia emissions from synthetic fertilizer and manure from agriculture to Earth System Models. We have evaluated how emissions change in the future and the processes driving these changes. We have examined the impact of agricultural ammonia emissions on present-day air quality and have evaluated the impact of resolving the emissions with high temporal resolution. We have also examined the impact of how Earth System Models treat the cycling of emissions in soils. Our code, the Flows of Agricultural Nitrogen – version 2 – model (FANv2) has been run in both the CLM framework and the ELM framework. To my knowledge the code has not yet been fully implemented into ELM. Volatilization of ammonia (NH3) from fertilizers and livestock wastes forms a significant pathway of nitrogen losses in agricultural ecosystems and constitutes the largest source of atmospheric emissions of NH3. We have provided a major update to the process model FAN (Flow of Agricultural Nitrogen), which evaluates NH3 emissions interactively within an Earth system model; in this work, the Community Earth System Model (CESM) is used. The updated version (FANv2) includes a more detailed treatment of both physical and agricultural processes, which allows the model to differentiate between the volatilization losses from animal housings, manure storage, grazed pastures, and the application of manure and different types of mineral fertilizers. The modeled ammonia emissions are first evaluated at a local scale against experimental data for various types of fertilizers and manure, and they are subsequently run globally to evaluate NH3 emissions for 2010–2015 based on gridded datasets of fertilizer use and livestock populations. Comparison of regional emissions shows that FANv2 agrees with previous inventories for North America and Europe and is within the range of previous inventories for China. However, due to higher NH3 emissions in Africa, India, and Latin America, the global emissions simulated by FANv2(48 Tg N) are 30 %–40 % higher than in the existing inventories.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

RuKY Catalyst‐Packed Permeation Membrane for Quantitative Ammonia and d3‐Ammonia Dehydrogenation to Ultrapure Hydrogen

Ammonia is a promising carbon-free hydrogen carrier, but incomplete ammonia dehydrogenation (cracking) generates atmospheric emissions of NO x , a potent greenhouse gas. Additionally, incomplete cracking of ammonia leads to regulatory challenges in nuclear and fusion power, where tritiated ammonia (NT 3 ) emissions are strictly controlled. Therefore, we report the use of low-temperature ammonia dehydrogenation catalysts (3%Ru/1%Y/12%K/Al 2 O 3 ) in a palladium alloy H 2 permeation membrane for quantitative conversion of ammonia into hydrogen and nitrogen at industry-relevant conditions. This catalytic membrane reactor system achieved an astonishing effluent concentration of <1 ppm at 450°C under a 100% NH 3 stream, which is far beyond the 99.6% conversion target required for the adoption of ammonia as a vehicle fuel. The low-temperature ammonia dehydrogenation catalyst was tested in a packed bed reactor with NH 3 and ND 3 to both elucidate the reaction mechanism and to quantify the kinetic isotope effect of the membrane reactor. The rate-limiting step at temperatures relevant to the palladium membrane are isotope independent, indicating that the isotopologue content will not modify the desired reaction kinetics. By reducing emissions to below-trace levels with no additional separation, this work provides a path to greatly simplified and miniaturized ammonia cracking processes.

ammonia decomposition↗

DOE OSTI2024

Conversion of Site-Specific Meteorological Data for use in CAP-88 PC

CAP-88 PC is a commonly used radiological atmospheric dispersion model. This US EPA-approved model is used to demonstrate compliance with atmospheric emission regulations for radionuclides. While the model includes a large library of meteorological data for use across the United States, there are applications when users may wish to use onsite meteorological data as an input to the CAP-88 PC model. Here, in this work, we present a work-around process for preparing and converting onsite data for use in CAP-88 PC. However, the use of local data should provide a more realistic estimate of doses to members of the public in the immediate vicinity of a facility, although the regulatory agency having jurisdiction may not accept the use of local data for compliance. Additionally, the historical meteorological records from 20+ years ago (at a site many kilometers away) might not be representative of current local weather patterns, highlighting another benefit of using local meteorological data.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Fermentation‐mediated growth, signaling, and defense in plants

Summary While traditionally considered important mainly in hypoxic roots during flooding, upregulation of fermentation pathways in plants has recently been described as an evolutionarily conserved drought survival strategy, with acetate signaling mediating reprograming of transcription and cellular carbon and energy metabolism from roots to leaves. The amount of acetate produced directly correlates with survival through potential mechanisms including defense gene activation, biosynthesis of primary and secondary metabolites, and aerobic respiration. Here, we review root ethanolic fermentation responses to hypoxia during saturated soil conditions and summarize studies highlighting acetate fermentation under aerobic conditions coupled with respiration during growth and drought responses. Recent work is discussed demonstrating long‐distance transport of acetate via the transpiration stream as a respiratory substrate. While maintenance and growth respiration are often modeled separately in terrestrial models, here we propose the concept of ‘Defense Respiration’ fueled by acetate fermentation in which upregulation of acetate fermentation contributes acetate substrate for alternative energy production via aerobic respiration, biosynthesis of primary and secondary metabolites, and the acetylation of proteins involved in defense gene regulation. Finally, we highlight new frontiers in leaf‐atmosphere emission measurements as a potential way to study acetate fermentation responses of individual leaves, branches, ecosystems, and regions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

An improved mechanistic model for ammonia volatilization in Earth system models: Flow of Agricultural Nitrogen version 2 (FANv2)

Abstract. Volatilization of ammonia (NH 3 ) from fertilizers and livestock wastes forms a significant pathway of nitrogen losses in agricultural ecosystems and constitutes the largest source of atmospheric emissions of NH 3 . This paper describes a major update to the process model FAN (Flow of Agricultural Nitrogen), which evaluates NH 3 emissions interactively within an Earth system model; in this work, the Community Earth System Model (CESM) is used. The updated version (FANv2) includes a more detailed treatment of both physical and agricultural processes, which allows the model to differentiate between the volatilization losses from animal housings, manure storage, grazed pastures, and the application of manure and different types of mineral fertilizers. The modeled ammonia emissions are first evaluated at a local scale against experimental data for various types of fertilizers and manure, and they are subsequently run globally to evaluate NH3 emissions for 2010–2015 based on gridded datasets of fertilizer use and livestock populations. Comparison of regional emissions shows that FANv2 agrees with previous inventories for North America and Europe and is within the range of previous inventories for China. However, due to higher NH 3 emissions in Africa, India, and Latin America, the global emissions simulated by FANv2 (48 Tg N) are 30 %–40 % higher than in the existing inventories.

Vira, Julius↗

DOE OSTI2023

Tomographic optical emission spectroscopy of atmospheric pressure plasma interacting with complex surfaces

Plasma distribution in 3D space is heavily influenced by complex surfaces and the coupling interactions between plasma properties and interfacing material properties. For example, guided streamers that transition to surface ionization waves (SIWs) and propagate over structured dielectrics experience field enhancements that can lead to localized increases in ionization rates and complex 3D configurations that are difficult to analyze. Investigating these configurations requires techniques than can provide a more complete 3D picture. To help address this capability gap, a tomographic optical emission spectroscopy (tomo-OES) diagnostic system has been developed at Sandia National Laboratories that can resolve SIWs. The system includes four intensified cameras that measure the angular projections of the plasma light emission through bandpass filters. A dot calibration target co-registers each angular projection to the same voxel grid and an algebraic reconstruction technique (ART) recovers the light intensity at each voxel. An atmospheric pressure plasma jet (APPJ), provided by Peter Bruggeman, has been investigated and representative results are shown in Figure 1. Here, a bandpass filter was used to isolate emission from the N 2 second positive system (SPS) at 337.1 nm to capture the transition of the streamer to SIW on a planar dielectric surface (relative permittivity 3.3) located 3 mm below the APPJ [3]. The surface wave velocity was 3.5x10 4 (m/s), consistent with measurements made by Steven Shannon. Characterization of this APPJ will support the group effort of standing up a reproducible APPJ across institutions for applications such as liquid treatment, catalysis, and plasma aided combustion. Future work will investigate non-planar surfaces and eventually develop tomographic laser-induced fluorescence (tomo-LIF) approaches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Improved Representations of Longwave Surface Emissivity to Reduce Surface and Atmospheric Heating Biases in Earth System Models

Abstract Many Earth system models (ESMs) approximate surface emissivity as a broadband constant. This approximation reduces the computational burden, yet omits the spectral structure of emissivity and atmospheric absorption. Neglecting spectral variation in surface emission introduces biases in longwave (LW) atmospheric fluxes and heating. Biases are strongest over surfaces with strongly varying emissivity and minimal atmospheric opacity. We examine these biases over water, ice, and snow surfaces. We partition spectral emissivity into the 16 spectral bands utilized by a single‐column atmospheric radiative transfer model (RRTMG_LW) commonly used in ESMs. We quantify flux and heating biases introduced by broadband assumptions relative to the spectrally resolved case for standard atmospheric profiles over each surface type. Current assumptions tend to overestimate upwelling surface fluxes; for example, the greybody assumption overestimates flux by 1.6 W/m 2 (0.52%) at the bottom of a mid‐latitude winter atmosphere over ice, and by 2.33 (1.0%) at the top of atmosphere. The blackbody assumption tends to artificially cool Earth's surface, stabilizing the lower troposphere. Interestingly, the optimal broadband emissivity can deviate from the Planck‐weighted mean by up to 3% depending on surface type and atmospheric profile. We investigate bias sensitivity to surface temperature, cloud water path, and atmospheric water vapor. Bias is most sensitive to water vapor content, and least sensitive to cloud water path. Lastly, we show that a modified greybody method with updated broadband values can reduce total surface flux bias up to 1.69 , comparable to a five‐band approach and at a fraction of the computational cost.

Manzo, L. [Department of Earth System Science Univ↗

DOE OSTI2020

A Mineralogy–Based Anthropogenic Combustion–Iron Emission Inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Current estimates predict up to 20% of global ocean net primary productivity depends on an atmospheric iron source. Using a technology–based methodology, we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral–specific atmospheric reactions. We compare different methodologies for representing anthropogenic iron solubility: measured in mild and strong leaches and estimated using a mineralogy basis and identify the emissions that are most affected by such assumptions. The inclusion of metal smelting as an iron source increases iron emissions by up to 10 times higher in the fine aerosol fraction (smaller than 1 μm) than most previous inventories. Different solubility assumptions alter anthropogenic soluble iron emissions and deposition by a factor of 20 and 10, respectively. Using solubilities measured in mild leaches and calculated by mineralogy give 20–30 Gg/yr anthropogenic emissions and 40–50 Gg/yr deposition, while those measured in strong leaches give 80–440 Gg/yr emissions and 200–450 Gg/yr deposition. Here, this range of anthropogenic soluble iron deposition leads to global soluble iron deposition of 1,900–2,300 Gg/yr when dust, wildfires, and atmospheric processing are included, indicating such assumptions can affect global soluble iron supply by about 30%. In regions where marine primary productivity is iron limited, anthropogenic combustion–iron contributes up to half of the atmospheric soluble iron flux to the North Pacific Ocean but supplies less than 5% to the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Development of a mineralogy-based anthropogenic combustion-iron emission inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Using a detailed technology-based methodology we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral-specific atmospheric reactions. The inclusion of metal smelting as an iron source, increases fine iron aerosol emissions (smaller than 1 µm) compared with most previous inventories. Different assumptions about solubility lead to estimates of 40-450 Gg/year deposition of soluble anthropogenic iron. When combined with dust and wildfires, the global total anthropogenic soluble iron deposition is 1900-2300 Gg/yr, so assumptions in anthropogenic inventories can affect estimates of global soluble iron supply by about 30%. In regions where marine primary productivity is iron-limited, anthropogenic combustion-iron contributes up to half of the atmospheric soluble iron flux to North Pacific Ocean.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Particle emission with identification from an atmospheric pressure plasma liquid interface

A conspicuous emission phenomenon of luminous particles from the liquid anode surface of an atmospheric pressure DC glow discharge is reported. The emission has been shown to occur when the plasma forms a pattern on the surface of the liquid electrolyte. Here, the spatial-temporal evolutions of the trajectories of emitted particles were studied using a high-speed imaging system. Particles were sampled in flight using a witness plate for analysis. Critical particle characteristics were examined using electron microscope technologies. The morphology of the resulting splats and compositions suggest that they are molten droplets with a great deal of structure, including evidence of nanoprecipitation. A theoretical model was employed to estimate the particle size from the measured splats, which provides a radius range within a hundred micrometers. This experiment leads to the postulation of a mechanism in which particle emission at the plasma liquid interface is likely driven by the Taylor cone effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

δ 13 C methane source signatures from tropical wetland and rice field emissions

The atmospheric methane (CH 4 ) burden is rising sharply, but the causes are still not well understood. One factor of uncertainty is the importance of tropical CH 4 emissions into the global mix. Isotopic signatures of major sources remain poorly constrained, despite their usefulness in constraining the global methane budget. Here, a collection of new δ 13 C CH 4 signatures is presented for a range of tropical wetlands and rice fields determined from air samples collected during campaigns from 2016 to 2020. Long-term monitoring of δ 13 C CH 4 in ambient air has been conducted at the Chacaltaya observatory, Bolivia and Southern Botswana. Both long-term records are dominated by biogenic CH 4 sources, with isotopic signatures expected from wetland sources. From the longer-term Bolivian record, a seasonal isotopic shift is observed corresponding to wetland extent suggesting that there is input of relatively isotopically light CH 4 to the atmosphere during periods of reduced wetland extent. This new data expands the geographical extent and range of measurements of tropical wetland and rice δ 13 C CH 4 sources and hints at significant seasonal variation in tropical wetland δ 13 C CH 4 signatures which may be important to capture in future global and regional models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Tomographic optical emission spectroscopy of an atmospheric pressure plasma jet and surface ionization waves on planar and structured surfaces

Here in this paper, an approach for 3D plasma structure diagnostics using tomographic optical emission spectroscopy (Tomo-OES) of a nanosecond pulsed atmospheric pressure plasma jet (APPJ) is presented. In contrast to the well-known Abel inversion, Tomo-OES does not require cylindrical symmetry to recover 3D distributions of plasma light emission. Instead, many 2D angular projections are measured with intensified cameras and the multiplicative algebraic reconstruction technique is used to recover the 3D distribution of light emission. This approach solves the line-of-sight integration problem inherent to optical diagnostics, allowing recovery of localized OES information within the plasma that can be used to better infer plasma parameters within complex plasma structures. Here, Tomo-OES was applied to investigate an APPJ operated with helium in ambient air and impinging on planar and structured dielectric surfaces. Surface charging caused the guided streamer from the APPJ to transition to a surface ionization wave (SIW) that propagated along the surface. The SIW experienced variable geometrical and electrical material properties as it propagated, leading to 3D configurations that were non-symmetric and spatially complex. Light emission from He, N$_2^+$, and N2 were imaged at ten angular projections and the respective time-resolved 3D emission distributions in the plasma were then reconstructed. The spatial resolution of each tomographic reconstruction was 7.4 µm and the temporal resolution was 5 ns, sufficient to observe the guided streamer and the effects of the structured surface on the SIW. Emission from He showed the core of the jet and emission from N$_2^+$ and N2 indicated effects of entrainment of ambient air. Penning ionization of N2 created a ring or outer layer of N$_2^+$ that spatially converged to form the 'plasma bullet' or spatially diverged across a surface as part of a SIW. The SIW entered trenches of size 150 µm, leading to decreases in plasma light emission in regions above the trenches. The plasma light emission was higher in some regions with trenches, possibly due to effects of field enhancement.

plasma interactions with complex surfaces↗

DOE OSTI2026

The Value of Reversible Carbon Storage in a Zero-Emissions World

Atmospheric carbon dioxide removal (CDR) is required to stabilize global temperature. CDR can be achieved via ecosystem-based approaches that are cost-effective but reversible (e.g., soil and forest management) or by more durable but expensive approaches (e.g., direct air capture coupled with geologic storage). Here, we examine trade-offs between these approaches, focusing on timing, climate impacts, and cost. We simulated reversible carbon accrual for a range of CDR contract structures using a general minimalist model of ecosystem carbon cycling, and parameterized it to simulate US agricultural soil management─specifically cover cropping─as a case study. We then quantified the resulting impact on atmospheric carbon and global temperature using a climate model emulator. We find that maintaining a patchwork of reversible CDR projects by replacing lapsed projects with new projects can reduce warming by 22–195 μ°C in 2100 and that the magnitude of this cooling effect depends on how effectively the patchwork is maintained. Long-term maintenance of reversible CDR projects requires institutional stability that cannot be guaranteed over multiple decades. Consequently, effective CDR ultimately requires replacing reversible projects with durable projects. To address this problem, we modeled the cost of replacing reversible agricultural soil CDR with geologic CDR. We found that using reversible CDR as a bridge to durable CDR is potentially more cost-effective as a global cooling strategy (0.20–0.81 billion USD per μ°C avoided) than perpetual maintenance of reversible CDR (0.32–1.31 billion USD per μ°C avoided) or an immediate transition to durable CDR (1.37–2.19 billion USD per μ°C avoided). However, we emphasize that institutional commitments to maintain reversible CDR projects cannot be guaranteed. Reliance on reversible CDR as a bridge to durable CDR therefore carries an unknown amount of risk and will only function if efforts to maintain reversible CDR are robust.

carbon capture and storage↗

DOE OSTI2026

Data for The Value of Reversible Carbon Storage in a Zero-Emissions World

Carbon↗

DOE OSTI2026

Southern Hemisphere Polar Infrared Radiation Experiment (SHIRE) Field Campaign Report

An extended-range atmospheric emitted radiance interferometer (AERI) instrument to be deployed to Scott Base (78 S, 166 E) in McMurdo Sound, Antarctica for the purpose of synergizing with the National Aeronautics and Space Administration (NASA) Polar Radiant Energy in the Far-InfraRed Experiment (PREFIRE) satellite mission (https://prefire.ssec.wisc.edu/), examining the closure of atmospheric thermal emission, and providing validation for PREFIRE. The PREFIRE mission is the first satellite mission to map Earth’s spectrally resolved thermal emission, from 5 to 50 microns, over seasonal to annual timescales. These new observations represent the beginning of an intensive examination of the nature of thermal emission from Earth (emission from both the surface and atmosphere). A primary requirement of the PREFIRE mission is to provide validation of the retrieved variables. Numerous field sites in the Arctic (such as the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) North Slope of Alaska observatory and Summit Station, Greenland) have existing instrumentation to facilitate validation, leaving an observational gap in Antarctica. Through SHIRE, we propose to establish a temporary, intensive measurement site in Antarctica to ensure that both poles are suitably represented, and benefit from this state-of-the art science. This will also allow Arctic and Antarctic atmospheric radiative states to be compared and contrasted. For SHIRE specifically, we also propose further objectives to examine the spectrally resolved thermal radiative closure of the polar atmosphere and the historical changes in Antarctic radiative forcing, using previous Antarctic field campaigns, such as the ARM West Antarctic Radiation Experiment (AWARE).

54 ENVIRONMENTAL SCIENCES↗