Search NASA⌕ Search

SEARCH · Search NASA

Results for “Axial symmetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Magnetic field models

Magnetic field models for Saturn based on data obtained by the Pioneer 11, Voyager 1, and Voyager 2 spacecraft are discussed. Saturn is distinguished form earth and Jupiter by the symmetry of its internal field about its axis of rotation; however, the strong periodic modulation of Saturn's radio emission is strong evidence of some departure from axial symmetry. Analysis of energetic charged particle absorption signatures observed by Pioneer and Voyager spacecraft are consistent with axisymmetric models of Saturn's magnetic field and demonstrate that any equatorial displacement of the dipole is limited to less than 0.01 R(S). Saturn's magnetosphere appears to be intermediate in configuration to those of earth and Jupiter. An equatorial ring current of about 10 million A, confined to a 5 R(S) thick annulus with inner and outer radii of 8 and 16 R(S), has a major effect on the geometry of the outer magnetosphere. Field lines are moderately but measurably stretched out in the equatorial plane.

Connerney, J. E. P.↗
NASA NTRS1991

A constitutive relation for the viscous flow of an oriented fiber assembly

A constitutive relation for an equivalent, homogeneous fluid is developed for the anisotropic viscous flow of an oriented assembly of discontinuous fibers suspended in a viscous fluid. The anisotropic viscous compliance matrix can be expressed in terms of three constants by assuming the equivalent fluid to be incompressible and the microstructure to have axial symmetry (transversely isotropic). By means of a micromechanics analysis, the three terms of the constitutive relation are expressed in terms of the viscosity of the matrix fluid, the fiber aspect ratio, and the fiber volume fraction. A comparison of the viscosity terms reveals that the elongational viscosity in the fiber direction varies as the square of the fiber aspect ratio and a complex function of the fiber volume fraction. Furthermore, the ratio of the axial elongational viscosity to the transverse elongational viscosity and both axial and transverse shear viscosities was shown to be 10 exp 4 - 10 exp 6 for fiber aspect ratio of 100-1000, except at extreme values of the fiber volume fraction.

Pipes, R. B.↗
NASA NTRS1999

Experimental Investigation of Pool Boiling Heat Transfer Enhancement in Microgravity in the Presence of Electric Fields

In boiling high heat fluxes are possible driven by relatively small temperature differences, which make its use increasingly attractive in aerospace applications. The objective of the research is to develop ways to overcome specific problems associated with boiling in the low gravity environment by substituting the buoyancy force with the electric force to enhance bubble removal from the heated surface. Previous studies indicate that in terrestrial applications nucleate boiling heat transfer can be increased by a factor of 50, as compared to values obtained for the same system without electric fields. The goal of our research is to experimentally explore the mechanisms responsible for EHD heat transfer enhancement in boiling in low gravity conditions, by visualizing the temperature distributions in the vicinity of the heated surface and around the bubble during boiling using real-time holographic interferometry (HI) combined with high-speed cinematography. In the first phase of the project the influence of the electric field on a single bubble is investigated. Pool boiling is simulated by injecting a single bubble through a nozzle into the subcooled liquid or into the thermal boundary layer developed along the flat heater surface. Since the exact location of bubble formation is known, the optical equipment can be aligned and focused accurately, which is an essential requirement for precision measurements of bubble shape, size and deformation, as well as the visualization of temperature fields by HI. The size of the bubble and the frequency of bubble departure can be controlled by suitable selection of nozzle diameter and mass flow rate of vapor. In this approach effects due to the presence of the electric field can be separated from effects caused by the temperature gradients in the thermal boundary layer. The influence of the thermal boundary layer can be investigated after activating the heater at a later stage of the research. For the visualization experiments a test cell was developed. All four vertical walls of the test cell are transparent, and they allow transillumination with laser light for visualization experiments by HI. The bottom electrode is a copper cylinder, which is electrically grounded. The copper block is heated with a resistive heater and it is equipped with 6 thermocouples that provide reference temperatures for the measurements with HI. The top electrode is a mesh electrode. Bubbles are injected with a syringe into the test cell through the bottom electrode. The working fluids presently used in the interferometric visualization experiments, water and PF 5052, satisfy requirements regarding thermophysical, optical and electrical properties. A 30kV power supply equipped with a voltmeter allows to apply the electric field to the electrodes during the experiments. The magnitude of the applied voltage can be adjusted either manually or through the LabVIEW data acquisition and control system connected to a PC. Temperatures of the heated block are recorded using type-T thermocouples, whose output is read by a data acquisition system. Images of the bubbles are recorded with 35mm photographic and 16mm high-speed cameras, scanned and analyzed using various software packages. Visualized temperature fields HI allows the visualization of temperature fields in the vicinity of bubbles during boiling in the form of fringes. Typical visualized temperature distributions around the air bubbles injected into the thermal boundary layer in PF5052 are shown. The temperature of the heated surface is 35 C. The temperature difference for a pair of fringes is approximately 0.05 C. The heat flux applied to the bottom surface is moderate, and the fringe patterns are regular. In the image a bubble penetrating the thermal boundary layer is visible. Because of the axial symmetry of the problem, simplified reconstruction techniques can be applied to recover the temperature field. The thermal plume developing above the heated surface for more intensive heating is shown. The temperature distribution in the liquid is clearly 3D, and tomographic techniques have to be applied to recover the temperature distribution in such a physical situation. A sequence of interferometric images showing the temperature distribution around the rising bubble, recorded with a high-speed camera is shown. Again, the temperature distribution is 3D, and a more complex approach to the evaluation, the tomographic reconstruction has to be taken. Measurement of the temperature distribution from the fringe pattern temperature distributions that yield important information regarding heat transfer are determined. Two algorithms that allow the quantitative evaluation of interferometric fringe patterns and the reconstruction of temperature fields during boiling have been developed at the Heat Transfer Laboratory of the Johns Hopkins University. In the first algorithm the bubble is assumed to be axially symmetrical, which significantly reduces the computational effort for quantifying the temperature distribution around the bubble. For this purpose the thermal boundary layer around the bubble is divided into equidistant concentric shells, and the refractive index is assumed to be constant in each of the shells. Since large temperature gradients are expected in the vicinity of the bubble during boiling, the deflection of the light beam cannot be neglected in boiling experiments. Since the exit angle of the light beam is known, this allows to account for the deflections and phase shifts outside the boundary layer (in the bulk fluid and in the windows of the test cell). Three dimensional temperature distributions in the vicinity of the bubble are reconstructed using tomographic techniques. In tomography, the measurement volume is sliced into 2D planes. In the present study these planes are parallel to the heated surface. The objective is to determine the values of the field parameter of interest in form of the field function in these 2D planes. The field parameter is the change of the refractive index of the liquid in the measurement volume caused by temperature changes. By superimposing data for many 2D planes recorded at the same time instant, the 3D temperature distribution in the measurement volume is recovered.

Herman, Cila↗
NASA NTRS1972

The shape of the F-region irregularities which produce satellite scintillations Evidence for axial asymmetry.

Correlation analysis of three-station observations of satellite amplitude scintillations, recorded at London, Canada during the summer of 1968, have been interpreted to give information on the height, size and shape of the ionospheric irregularities. The irregularities had a mean height of 390 km, and when interpreted in terms of the usual axially-symmetric, field-aligned model, had a mean axial ratio of 6.5, and a mean dimension transverse to the magnetic field of 0.7 km. None of these parameters showed any systematic trend with geomagnetic latitude. The data for one of the passes analyzed were inconsistent with axial symmetry, and when examined in terms of a more general model, 3 of 9 passes showed evidence of irregularities which were elongated both along and transverse to the earth's magnetic field, the elongation transverse to the field tending to lie in a north-south direction.

Moorcroft, D. R.↗
NASA NTRS1972

Some remarks on elastic crack-tip stress fields.

It is shown that if the displacement field and stress intensity factor are known as functions of crack length for any symmetrical load system acting on a linear elastic body in plane strain, then the stress intensity factor for any other symmetrical load system whatsoever on the same body may be directly determined. The result is closely related to Bueckner's (1970) weight function, through which the stress intensity factor is expressed as a sum of work-like products between applied forces and values of the weight function at their points of application. An example of the method is given wherein the solution for a crack in a remotely uniform stress field is used to generate the expression for the stress intensity factor due to an arbitrary traction distribution on the faces of a crack. A corresponding theory is developed in an appendix for three-dimensional crack problems, although this appears to be directly useful chiefly for problems in which there is axial symmetry.

Rice, J. R.↗
NASA NTRS1974

The magnetosphere of Jupiter as observed with Pioneer 10. I - Instrument and principal findings

Description of the first in situ observations of energetic electrons of energy greater than 0.06 MeV in the magnetosphere of Jupiter during November-December 1973. The outer magnetosphere has the form of a thin disklike quasi-trapping region extending from about 20 to over 100 Jovian radii. This magnetodisk is confined near the magnetic equatorial plane and has approximate axial symmetry about the magnetic axis of the planet. The observations inside a radial distance of 12 Jovian radii are well organized by a centered dipolar model of the planet's magnetic field with a tilt of 9.5 plus or minus 0.5 deg to the rotational axis and with pole at a system III longitude of 230 plus or minus 3 deg. Absolute omnidirectional intensities of electrons within the stable trapping region inside 20 Jovian radii are given for five energy ranges greater than 0.06, 0.55, 5.0, 21, and 31 MeV.

Van Allen, J. A.↗
NASA NTRS1975

Nozzle Free Jet Flows Within the Strong Curved Shock Regime

A study based on inviscid analysis was conducted to examine the flow field produced from a convergent-divergent nozzle when a strong curved shock occurs. It was found that a certain constraint is imposed on the flow solution of the problem which is the unique feature of the flow within this flow regime, and provides the reason why the inverse method of calculation cannot be employed for these problems. An approximate method was developed to calculate the flow field, and results were obtained for two-dimensional flows. Analysis and calculations were performed for flows with axial symmetry. It is shown that under certain conditions, the vorticity generated at the jet boundary may become infinite and the viscous effect becomes important. Under other conditions, the asymptotic free jet height as well as the corresponding shock geometry were determined.

Shih, Tso-Shin↗
NASA NTRS1975

Evolution of rotating interstellar clouds. I - Numerical techniques

A method is described for the numerical calculation of the hydrodynamic evolution of a self-gravitating configuration in two space dimensions with assumed axial symmetry. The calculation is formulated in cylindrical coordinates with respect to a moving Eulerian grid and is solved using explicit hydrodynamics combined with implicit radiative transfer. The physics included is appropriate for calculation of the collapse of a rotating protostellar cloud. The gravitational field is obtained by means of an alternating-direction iterative technique. Numerical tests to demonstrate the correctness of the method are presented for special cases.

Black, D. C.↗
NASA NTRS1977

A normalized view of Venus

A few Mariner 10 images of Venus have been 'normalized' to a standard scattering geometry using the exact solution by Chandrasekhar (1950) involving his H functions. The most striking feature of the normalized images is the bright polar ring or cap beyond about 50 deg latitude circle and a narrower brightness frequency distribution. The brightness variation along a meridian shows substantial axial symmetry on a large scale, and small-scale brightness variations over the planet are no more than about 10%. Inferences regarding the polar cloud tops in light of available evidence are discussed. The variation of mean brightness and of the ratio of mean square deviation of brightness to average brightness is comparable to the performance limits of the vidicon camera for the image sequence lasting about a day, so that the variation in distribution of dark and bright features over the planet and the UV albedo of the planet over about a day is small.

Limaye, S.↗
NASA NTRS1978

The structure of vortex breakdown

The term 'vortex breakdown', as used in the reported investigation, refers to a disturbance characterized by the formation of an internal stagnation point on the vortex axis, followed by reversed flow in a region of limited axial extent. Two forms of vortex breakdown, which predominate, are shown in photographs. One form is called 'near-axisymmetric' (sometimes 'axisymmetric'), and the other is called 'spiral'. A survey is presented of work published since the 1972 review by Hall. Most experimental data taken since Hall's review have been in tubes, and the survey deals primarily with such cases. It is found that the assumption of axial-symmetry has produced useful results. The classification of flows as supercritical or subcritical, a step that assumes symmetry, has proved universally useful. Experiments show that vortex breakdown is always preceded by an upstream supercritical flow and followed by a subcritical wake. However, a comparison between experiments and attempts at prediction is less than encouraging. For a satisfactory understanding of the structure of vortex breakdown it is apparently necessary to take into account also aspects of asymmetry.

Leibovich, S.↗
NASA NTRS1980

Collapse and equilibrium of rotating, adiabatic clouds

A numerical hydrodynamics computer code analysis of the collapse and establishment of equilibrium of adiabatic gas clouds restricted to axial symmetry found that the clouds are originally uniform in density and rotation. The method can compare the dynamic collapse and approach to equilibrium with the data on incompressible uniformly rotating equilibrium clouds and on equilibrium structures of differentially rotating polytropes. It is concluded that the stellar formation theory indicates that the low alpha fragments produced at the termination of the dynamic isothermal collapse phase of interstellar clouds may undergo significant dynamic collapse in an adiabatic regime leading to transitory ring formation and additional fragmentation on a smaller scale.

Boss, A. P.↗
NASA NTRS1981

Solar wind flow about the terrestrial planets. I - Modeling bow shock position and shape

A three-parameter method for modeling the position and shape of planetary bow waves was chosen to model the near portion of the Venus, earth and Mars bow shocks, and its results were compared with those of models using one to six free variables. It was found that the relative effective shapes of the near Martian, Cytherean, and terrestrial bow shocks are ellipsoidal, paraboloidal, and hyperboloidal, respectively, in response to the increasing bluntness of the obstacles that the planets present to the solar wind. No significant deviations from axial symmetry were found when the near bow waves of the earth and Venus were mapped into the aberrated terminator plane, in agreement with gas dynamic theory predictions neglecting the effects of the IMF because of their minuteness.

Slavin, J. A.↗
NASA NTRS1981

Acoustic transmission in lined flow ducts - A finite element eigenvalue problem

The problem of acoustical transmission in lined ducts with subsonic mean flow is of considerable practical interest in the context of fan noise attenuation in the ducted inlet regions of turbofan aircraft engines. If nonaxisymmetric liners are present, a loss of axial symmetry results, and the study of acoustic transmission involves the solution of a full two-dimensional eigenvalue problem. The reported investigation is concerned with such an eigenvalue problem. The employed method of solution is effectively a two-dimensional analog of an approach considered by Astley and Eversman (1979). The approach makes use of a Galerkin Finite Element Method whereby the weighting and basis functions are generated automatically by the discretization.

Astley, R. J.↗
NASA NTRS1981

Flame structure in a swirl stabilized combustor inferred by radiant emission measurements

Results of measurements of time-averaged chemiluminescent emissions from CH, OH, and CO2 and of Na tracer emissions along lateral lines-of-sight through a cylindrical premixed, swirl-stabilized combustor are reported. Assuming axial symmetry and small optical depth, raw data are inverted to obtain local emission levels from these species as a function of radius. The chemiluminescent emissions are interpreted as signatures of chemical reaction and used in determining the regions of reactions and heat release in the combustor. The data are compared with composition and velocity data obtained in the combustor for identical operating conditions. The results demonstrate that reaction occurs in a relatively narrow, turbulent flame-like combustion zone which begins upstream of the time-averaged location of the swirl-induced recirculation zone and propagates around and laterally away from the recirculation zone into the unburned gas.

Beyler, C. L.↗