Search NASA⌕ Search

SEARCH · Search NASA

Results for “B CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Probabilistic Risk Assessment of Aging Layered Pressure Vessels

The National Aeronautics and Space Administration (NASA) operates approximately 300 aging layered pressure vessels that were designed and manufactured prior to ASME Boiler and Pressure Vessel (B&PV) code requirements. In order to make decisions regarding the continued fitness-for-service of these non-code carbon steel vessels, it is necessary to perform a relative risk of failure assessment for each vessel. However, risk assessment of these vessels is confounded by uncertainties and variabilities related to the use of proprietary materials in fabrication, missing construction records, geometric discontinuities, weld residual stresses, and complex service stress gradients in and around the welds. Therefore, a probabilistic framework that can capture these uncertainties and variabilities has been developed to assess the fracture risk of flaws in regions of interest, such as longitudinal and circumferential welds, using the NESSUS® probabilistic modeling software and NASGRO® fracture mechanics software. In this study, the probabilistic framework was used to predict variability in the stress intensity factor associated with different reference flaws located in the head-to-shell circumferential welds of a 4-layer and 14-layer pressure vessel. The probabilistic studies predict variability in flaw behavior and the important uncertain parameters for each reference flaw location.

Riha, D. S.↗
NASA NTRS1991

A B-ISDN-compatible modem/codec

Coded modulation techniques for development of a broadband integrated services digital network (B-ISDN)-compatible modem/codec are investigated. The selected baseband processor system must support transmission of 155.52 Mbit/s of data over an INTELSAT 72-MHz transponder. Performance objectives and fundamental system parameters, including channel symbol rate, code rate, and the modulation scheme are determined. From several candidate codes, a concatenated coding system consisting of a coded octal phase shift keying modulation as the inner code and a high rate Reed-Solomon as the outer code is selected and its bit error rate performance is analyzed by computer simulation. The hardware implementation of the decoder for the selected code is also described.

Hemmati, F.↗
NASA NTRS1988

Thrust Chamber Modeling Using Navier-Stokes Equations: Code Documentation and Listings

A copy of the PHOENICS input files and FORTRAN code developed for the modeling of thrust chambers is given. These copies are contained in the Appendices. The listings are contained in Appendices A through E. Appendix A describes the input statements relevant to thrust chamber modeling as well as the FORTRAN code developed for the Satellite program. Appendix B describes the FORTRAN code developed for the Ground program. Appendices C through E contain copies of the Q1 (input) file, the Satellite program, and the Ground program respectively.

Daley, P. L.↗
NASA NTRS2008

Initial Results from the Variable Intensity Sonic Boom Database

43 sonic booms generated (a few were evanescent waves) a) Overpressures of 0.08 to 2.20 lbf/sq ft; b) Rise-times of about 0.7 to 50 ms. Objectives: a) Structural response of a house of modern construction; b) Sonic boom propagation code validation. Approach: a) Measure shockwave directionality; b) Determine effect of height above ground on acoustic level; c) Generate atmospheric turbulence filter functions.

Haering, Edward A., Jr.↗
NASA NTRS2007

Evaluation of Bulk Charging in Geostationary Transfer Orbit and Earth Escape Trajectories Using the Numit 1-D Charging Model

The NUMIT 1-dimensional bulk charging model is used as a screening to ol for evaluating time-dependent bulk internal or deep dielectric) ch arging of dielectrics exposed to penetrating electron environments. T he code is modified to accept time dependent electron flux time serie s along satellite orbits for the electron environment inputs instead of using the static electron flux environment input originally used b y the code and widely adopted in bulk charging models. Application of the screening technique ts demonstrated for three cases of spacecraf t exposure within the Earth's radiation belts including a geostationa ry transfer orbit and an Earth-Moon transit trajectory for a range of orbit inclinations. Electric fields and charge densities are compute d for dielectric materials with varying electrical properties exposed to relativistic electron environments along the orbits. Our objectiv e is to demonstrate a preliminary application of the time-dependent e nvironments input to the NUMIT code for evaluating charging risks to exposed dielectrics used on spacecraft when exposed to the Earth's ra diation belts. The results demonstrate that the NUMIT electric field values in GTO orbits with multiple encounters with the Earth's radiat ion belts are consistent with previous studies of charging in GTO orb its and that potential threat conditions for electrostatic discharge exist on lunar transit trajectories depending on the electrical proper ties of the materials exposed to the radiation environment.

Minow, Joseph I.↗
NASA NTRS1983

An extended d(min) = 4 RS code

A minimum distance d sub m - 4 extended Reed - Solomon (RS) code over GF (2 to the b power) was constructed. This code is used to correct any single byte error and simultaneously detect any double byte error. Features of the code; including fast encoding and decoding, are presented.

Deng, H.↗
NASA NTRS1989

Generalized Multiple-Trellis-Coded Modulation

Generalized multiple-trellis-coded modulation technique combines multiple trellis coding (more than one channel symbol per trellis branch transmitted) with symmetrical M-ary phase-shift keying. Transmitter puts out k M-ary code symbols for every b input binary symbols. Throughout performances, b/k, of trellis-coded multiple-phase-shift-keying channels compared with computational cutoff rates, R0, of multiple-phase-shift keying. Performs better than conventional trellis-coded modulation technique, with no increase in complexity.

Divsalar, D.↗
NASA NTRS1996

Bit Error Probability for Maximum Likelihood Decoding of Linear Block Codes

In this paper, the bit error probability P(sub b) for maximum likelihood decoding of binary linear codes is investigated. The contribution of each information bit to P(sub b) is considered. For randomly generated codes, it is shown that the conventional approximation at high SNR P(sub b) is approximately equal to (d(sub H)/N)P(sub s), where P(sub s) represents the block error probability, holds for systematic encoding only. Also systematic encoding provides the minimum P(sub b) when the inverse mapping corresponding to the generator matrix of the code is used to retrieve the information sequence. The bit error performances corresponding to other generator matrix forms are also evaluated. Although derived for codes with a generator matrix randomly generated, these results are shown to provide good approximations for codes used in practice. Finally, for decoding methods which require a generator matrix with a particular structure such as trellis decoding or algebraic-based soft decision decoding, equivalent schemes that reduce the bit error probability are discussed.

Lin, Shu↗
NASA NTRS2000

Coupled receiver-decoders

This paper describes coupled receiver-decoder architectures for suppressed carrier convolutionally-coded signals and residual carrier turbo-coded signals.

convolutional codes turbo codes receiver decoder j↗
NASA NTRS1990

Iso-chemical potential trajectories in the P-T plane for He II

Trajectories of constant chemical potential in the P-T plane serve as an integral formulation of London's equation. The trajectories are useful for analysis and synthesis of fountain effect pump performance. A family of trajectories is generated from available numerical codes.

Maytal, B.↗
NASA NTRS1991

LDEF geometry/mass model for radiation analyses

A 3-D geometry/mass model of Long Duration Exposure Facility (LDEF) was generated to aid in the interpretation of ionizing radiation experiments relative to the influence of varying shielding distributions around the dosimetry, and to allow more definitive calculations and comparisons with the measured data. This model takes into account the major individual structural members of the LDEF spacecraft, the mass in each experiment tray, and, for selected trays containing ionizing radiation dosimetry, major parts within the tray are modeled. The geometry/mass model, together with a ray tracing algorithms, was programmed for use both as a stand alone code in determining 3-D shielding distributions at dosimetry locations, and as a geometry module that can be interfaced with radiation transport codes.

Colborn, B. L.↗
NASA NTRS1992

LDEF geometry/mass model for radiation analyses

A three-dimensional geometry/mass model of LDEF is under development for ionizing radiation analyses. This model, together with ray tracing algorithms, is being programmed for use both as a stand alone code in determining three-dimensional shielding distributions at dosimetry locations and as a geometry module that can be interfaced with radiation transport codes.

Colborn, B. L.↗
NASA NTRS1993

Mars Global Reference Atmospheric Model (Mars-GRAM): Release No. 2 - Overview and applications

The Mars Global Reference Atmospheric Model (Mars-GRAM), a science and engineering model for empirically parameterizing the temperature, pressure, density, and wind structure of the Martian atmosphere, is described with particular attention to the model's newest version, Mars-GRAM, Release No. 2 and to the improvements incorporated into the Release No. 2 model as compared with the Release No. 1 version. These improvements include (1) an addition of a new capability to simulate local-scale Martian dust storms and the growth and decay of these storms; (2) an addition of the Zurek and Haberle (1988) wave perturbation model, for simulating tidal perturbation effects; and (3) a new modular version of Mars-GRAM, for incorporation as a subroutine into other codes.

James, B.↗
NASA NTRS2003

Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

Bowen, Brent D.↗