SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Br crystallizes in the tetragonal I4/mmm space group. The structure is two-dimensional and consists of two Br sheets oriented in the (0, 0, 1) direction. Br is bonded in a square co-planar geometry to four equivalent Br atoms. All Br–Br bond lengths are 2.87 Å.
The quantification and determination of halogen isotope composition is essential in many fields including geochemistry and nuclear forensics. Detection of the halogen elements is commonly attempted with inductively coupled plasma mass spectrometry (ICP-MS) however, there are multiple challenges faced. Most significantly this includes very poor ionization efficiency and the potential for isobaric interferences from either matrix or plasma species. Thus, sensitivity and accuracy are often limiting issues. Here a liquid sampling-atmospheric pressure glow discharge (LS-APGD) ionization source is coupled with an ultrahigh resolution Orbitrap MS to perform halogen detection of bromine and iodine as initial analytes. This facilitates simple and sensitive detection of these elements as atomic anions from simple aqueous salt solutions. Collision-induced dissociation (CID) and higher-energy collisional dissociation (HCD) energies were optimized to produce the maximum response of Br − and I − . The LS-APGD conditions were optimized using a design of experiments (DOE) approach for Br − and I − concurrently. Response curves for Br − and I − solutions determined limit of detection (LOD) values of 50 pg and 5 pg, respectively, in 20 μL aliquots. The curves indicated response factors of 0.67 for 79 Br − and 0.90 for 127 I − . Br isotope ratios were determined with precision between 0.7 and 7.3% RSD, with the isotope ratios determined with precision 0.8% RSD at concentrations above the limit of quantification. Preliminary tests were conducted to evaluate the effect of different cations (Na + , K + , and Mg 2+ ) on Br − responses, with no discernible impacts observed on the halogen signal responses. This study demonstrates the potential use of the LS-APGD-Orbitrap-MS for the detection of multiple halogens while avoiding interferences, minimizing sample preparation, and overcoming ionization barriers.
Direct laser absorption of a slit supersonic discharge expansion provides the first high-resolution spectroscopic results on the symmetric CH stretch excitation (ν 1 ) of the bromomethyl (CH 2 Br) radical in the ground electronic state. Narrowband (<1 MHz) mid-infrared radiation is produced by difference-frequency generation of two visible laser beams, with the open shell halohydrocarbon radical generated by electron dissociative attachment of CH 2 Br 2 in a discharge and rapidly cooled to T rot = 18 ± 1 K in the subsequent slit-jet supersonic expansion. A rovibrational structure in the radical spectrum is fully resolved, as well as additional splittings due to spin-rotation effects and 79 Br/ 81 Br isotopologues in natural abundance. Spectroscopic constants and band origins are determined by fitting the transition frequencies to a non-rigid Watson Hamiltonian, yielding results consistent with a vibrationally averaged planar radical and an unpaired electron in the out-of-plane p π orbital. Additionally, extensive satellite band structure from a vibrational hot band is observed and analyzed. The hot band data is compared to CFOUR/VPT2 (CCSD(T)cc-pVQZ) ab initio anharmonic predictions of the vibration rotation alpha matrix, which permits unambiguous assignment to CH 2 symmetric-stretch excitation built on the singly excited CH 2 out-of-plane bending mode (ν 1 + ν 4 ← ν 4 ). Longitudinal cooling of the Doppler width in the slit-jet expansion geometry also reveals partially resolved hyperfine structure on transitions out of the lowest angular momentum states in excellent agreement with predictions based on microwave studies. High level ab initio MOLPRO calculations [CCSD(T)-f12b/VnZ-f12 (n = 3, 4, CBS)] are also performed with explicitly correlated f12 electron methods for the out-of-plane CH 2 bending mode over the halogen series CH 2 X (X = F, Cl, Br, I), which clearly reveals a non-planar geometry for X = F (with a ΔE ≈ 0.3 kcal/mol barrier) and yet planar equilibrium geometries for X = Cl, Br, and I. Finally, a detailed Boltzmann analysis of the transition intensities provides support for negligible collisional equilibration of the entangled H atom nuclear spin states on the few hundred microsecond time scale and high collision densities of a slit supersonic expansion.
The combined effects of postural changes, fluid shifts and diuresis associated with the absence of the gravity vector may decrease gastrointestinal motility (GIM) during space flight. GIM can be estimated from the mouth to cecum transit time (MCTT) of orally administered lactulose (LAC); this test is used to assess changes in GIM in normal subjects and in patients with GI pathology and related disease conditions. Since bedrest (BR) mimics some of the physiological changes that occur during space flight, the effect of ten days of BR on GIM was evaluated from the MCTT of LAC. Methods: Subjects were 12 nonsmoking males between the ages of 35 and 50. After an 8-10 hour fast, subjects ingested Cephulac (registered) (20 g solution) with a low-fiber breakfast on four different days (45, 30, 25, and 20) before BR and on three separate days (4, 7, and 10) during BR. Breath-H2 concentrations were measured before and at 10 minute intervals for 4 hours after breakfast using a Quintron breathalyzer and MCTT was determined from these data. Results: MCTT ranged between 10 and 122 minutes during ambulation and 80 to 120 minutes during BR with means of 79 minutes and 122 minutes respectively. Conclusion: Mean MCTT during BR was 54 percent longer than during ambulation, suggesting that absorption and availability of orally administered medications and nutrients may be delayed or impaired as a result of decreased GIM during bedrest.
Br is Protactinium structured and crystallizes in the orthorhombic Cmce space group. The structure is zero-dimensional and consists of four bromine molecules. Br is bonded in a distorted single-bond geometry to one Br atom. The Br–Br bond length is 2.39 Å.
Br is Cubic alpha N2-like structured and crystallizes in the orthorhombic Fddd space group. The structure is zero-dimensional and consists of sixty-four bromine molecules. Br is bonded in a single-bond geometry to one Br atom. The Br–Br bond length is 2.32 Å.
Abstract We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10 −4 S cm −1 , whereas here a Cu–Br congener, (EA) 2 CuBr 4 (EA=ethylammonium), exhibits conductivity as high as 2×10 −3 S cm −1 at only 2.6 GPa, and 0.17 S cm −1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.
Small diameter (Ø 16 mm) TlSr 2 Cl 5 and TlSr 2 Br 5 crystals were grown by the Vertical Bridgman method. X-ray diffraction measurements show that both have the monoclinic crystal structure with space group P21/c. TlSr 2 Cl 5 and TlSr 2 Br 5 have a density of 4.14 g/cm 3 and 5.03 g/cm 3 , respectively. The effective Z of TlSr 2 Cl 5 and TlSr 2 Br 5 is 63.7 and 58.6, respectively. Radioluminescence spectra of TlSr 2 Cl 5 and TlSr 2 Br 5 feature a broad emission band peaking at 440 and 445 nm, respectively. As a result the light yield of TlSr 2 Cl 5 and TlSr 2 Br 5 was estimated to be 17,000 and 45,000 ph/MeV, respectively.
Heterogeneous materials containing molecular catalytic sites show promise for electrocatalytic reduction of CO 2 to energy-enriched carbon products. Interactions between the catalyst and the heterogeneous support increasingly are recognized as important in governing product selectivity and rate. Recent work on Mn(R-bpy)(CO) 3 Br type catalysts immobilized on multiwalled carbon nanotubes (MWCNT) demonstrated control of electrocatalytic behavior with steric modification of the molecular catalyst. Phenyl groups installed in the 4,4' positions of the bipyridine ligand (ph-bpy) maximized performance through π–π interactions with the MWCNT support. Herein we report the outcome of extending the ligand π system with Mn(nap-bpy)(CO) 3 Br (nap-bpy = 4,4'-di(naphthalen-1-yl)-2,2'-bipyridine) and Mn(pyr-bpy)(CO) 3 Br (pyr-bpy = 4,4'-di(pyren-1-yl)-2,2'-bipyridine) immobilized on MWCNT. We demonstrate exceptional electrocatalysis with Mn(nap-bpy)(CO) 3 Br/MWCNT (FE CO > 92%; J CO = 16.5 mA/cm 2 ) and find that this catalyst electrochemically reduces bicarbonate in the absence of deliberately added CO 2 at a remarkable overall selectivity of >80% for carbon products (FE HCOO – = 52% and FE CO = 29%). We show diminishing returns to simply adding aromatic character to the bipyridyl ligand with Mn(pyr-bpy)(CO) 3 Br/MWCNT and observe a unique cambering of the Mn(nap-bpy)(CO) 3 Br bipyridyl ligand that we believe enables selective catalysis. Mechanistic studies were carried out on Mn(nap-bpy)(CO) 3 Br/MWCNT using a novel thin-film infrared spectroelectrochemical (IR-SEC) technique. These experiments observe the immobilized Mn(nap-bpy)(CO) 3 Br undergo single electron reduction to a Mn-centered radical that binds CO 2 in a reduction-coupled process.
Ultrafast scintillators are essential for next-generation radiation detection, positron emission tomography, and high-speed medical imaging. All-inorganic CsPbBr 3 perovskites are attractive candidates because of their high stopping power, and excellent optical quality, yet their long carrier lifetimes result in slow scintillation responses on the order of hundreds of nanoseconds. Here, we demonstrate that controlled over-doping with Br 2 produces CsPbBr 3.03 single crystals with sub-nanosecond scintillation at room temperature while preserving crystal quality. Single crystals grown by the Bridgman method exhibit high transparency and maintain the orthorhombic perovskite structure. Br 2 over-doping induces a slight lattice expansion (about 0.42% increase in unit-cell volume) while maintaining the orthorhombic perovskite phase and high optical transparency. Optical absorption reveals a slight redshift of the absorption edge after Br 2 introduction, indicating a modified defect landscape. Time-resolved photoluminescence and radioluminescence measurements show that Br 2 doping creates dense and efficient recombination centers that reduce the scintillation decay time from more than 100 ns in undoped crystals to 350 ps under 5.486 MeV α-particle excitation, and the scintillation decay time decreases by two orders of magnitude. The doped crystals also achieve a spatial resolution of 12 lp mm −1 in X-ray imaging. These results reveal a defect-engineering route for achieving ultrafast scintillation in halide perovskites and highlight the potential of Br 2 -modified CsPbBr 3 for fast timing applications.
Crystals of undoped and Eu 2+ -doped TlSr 2 Br 5 of up to 16 mm in diameter and 50 mm in length were grown by the Vertical Bridgman technique. TlSr 2 Br 5 has the monoclinic crystal structure with space group P21/c. Its density and Z eff are 5.03 g/cm 3 and 58.6, respectively. Radioluminescence spectra of undoped and Eu 2+ -doped TlSr 2 Br 5 feature a broad emission band peaking at about 440 nm for undoped and 520 nm for Eu 2+ -doped crystals. The light yield of undoped TlSr 2 Br 5 is 42,000 ph/MeV, which increases to 55,000 ph/MeV for Eu 2+ -doped crystals. The energy resolution at 662 keV ( 137 Cs) is about 5 – 6% (FWHM). As a result, the scintillation decay of undoped and Eu 2+ -doped TlSr 2 Br 5 is of the order of 100s of nanoseconds.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site BR-Ma3 ZF3, Colosso farm. This is the FLUXNET version of the carbon flux data for the site BR-Ma3 ZF3, Colosso farm produced by applying the standard ONEFlux (1F) software. Site Description - The BR-Ma3, ZF3 tower, is deployed in a area from the Biological Dynamics of Forest Fragments Project (PDBFF, the portuguese acronym) in the city of Rio Preto da Eva (km 41 of BR-174), 64 km north of Manaus. BR-Ma3 is covered by forest fragment , pasture (Brachiaria humidicola) and secondary forest growth (resulted from an abandoned degraded pasture).
Recent in situ and satellite measurements suggest a contribution of ~5 pptv to stratospheric inorganic bromine from short-lived bromocarbons. We conduct a modeling study of the two most important short-lived bromocarbons, bromoform (CHBr3) and dibromomethane (CH2Br2), with the Goddard Earth Observing System Chemistry Climate Model (GEOS CCM) to account for this missing stratospheric bromine. We derive a "top-down" emission estimate of CHBr3 and CH2Br2 using airborne measurements in the Pacific and North American troposphere and lower stratosphere obtained during previous NASA aircraft campaigns. Our emission estimate suggests that to reproduce the observed concentrations in the free troposphere, a global oceanic emission of 425 Gg Br yr(exp -1) for CHBr3 and 57 Gg Br yr(exp -l) for CH2Br2 is needed, with 60% of emissions from open ocean and 40% from coastal regions. Although our simple emission scheme assumes no seasonal variations, the model reproduces the observed seasonal variations of the short-lived bromocarbons with high concentrations in winter and low concentrations in summer. This indicates that the seasonality of short-lived bromocarbons is largely due to seasonality in their chemical loss and transport. The inclusion of CHBr3 and CH2Br2 contributes ~5 pptv bromine throughout the stratosphere. Both the source gases and inorganic bromine produced from source gas degradation (Br~SLS) in the troposphere are transported into the stratosphere, and are equally important. Inorganic bromine accounts for half (2.5 pptv) of the bromine from the inclusion of CHBr3 and CHzBr2 near the tropical tropopause and its contribution rapidly increases to ~ 100% as altitude increases. More than 85% of the wet scavenging of Br(sub y)(sup VSLS) occurs in large-scale precipitation below 500 hPa. Our sensitivity study with wet scavenging in convective updrafts switched off suggests that Br(sub y)(sup SLS) in the stratosphere is not sensitive to convection. Convective scavenging only accounts for ~0.2 pptv (4%) difference in inorganic bromine delivered to the stratosphere.
Abstract Localized atomistic disorder in halide‐based solid electrolytes (SEs) can be leveraged to boost Li + mobility. In this study, Li + transport in structurally modified Li 3 HoCl 6 , via Br − introduction and Li + deficiency, is explored. The optimized Li 3‐3 y Ho 1+ y Cl 6‐ x Br x achieves an ionic conductivity of 3.8 mS cm −1 at 25 °C, the highest reported for holmium halide materials. 6,7 Li nuclear magnetic resonance and relaxometry investigations unveil enhanced ion dynamics with bromination, attaining a Li + motional rate neighboring 116 MHz. X‐ray diffraction analyses reveal mixed‐anion‐induced phase transitions with disproportionate octahedral expansions and distortions, creating Ho‐free planes with favorable energetics for Li + migration. Bond valence site energy analysis highlights preferred Li + transport pathways, particularly in structural planes devoid of Ho 3+ blocking effects. Molecular dynamics simulations corroborate enhanced Li + diffusion with Br − introduction into Li 3 HoCl 6 . Li‐Ho electrostatic repulsions in the (001) plane presumably drive Li + diffusion into the Ho‐free (002) layer, enabling rapid intraplanar Li + motion and exchange between the 2d and 4h sites. Li 3‐3 y Ho 1+ y Cl 6‐ x Br x also demonstrates good battery cycling stability. These findings offer valuable insights into the intricate correlations between structure and ion transport and will help guide the design of high‐performance fast ion conductors for all‐solid‐state batteries.
Electric field gradient (EFG) tensors in the equatorial plane of the linear UO 2 2+ ion have been measured by nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) experiments and computed by relativistic Kohn–Sham methods with and without environment embedding for Cs 2 UO 2 Cl 4 and Cs 2 UO 2 Br 4 . This approach expands the possibilities for probing the electronic structure in uranyl complexes beyond the strongly covalent U–O bonds. The combined analyses find that one of the two largest principal EFG tensor components at the halogen sites points along the U–X bond (X = Cl, Br), and the second is parallel to the UO 2 2+ ion; in Cs 2 UO 2 Cl 4 , the components are nearly equal in magnitude, whereas in Cs 2 UO 2 Br 4 , due to short-range bromide–cesium interactions, the equatorial component is dominant for one pair of Br sites and the axial component is larger for the second pair. Additionally, the directions and relative magnitudes of the field gradient principal axes are found to be sensitive to the σ and π electron donation by the ligands and the model of the environment. Chlorine-35 NQR spectra of 235 U-depleted and 235 U-enriched Cs 2 UO 2 Cl 4 exhibited no uranium-isotope-dependent shift, but the resonance of the depleted sample displayed a 58% broader line width.
Wide band gap mixed halide perovskites such as MAPb(I 1–x Br x ) 3 sparked great research interest because of their outstanding optoelectronic properties, ease of fabrication, and band gap tunability. Their application thus far is however limited by light-induced halide segregation in which microscopic clusters with a high iodide content are formed and act as recombination centers. The key mechanism(s) underlying this halide segregation process are still debated. Here, we present a study on the photoluminescence evolution in MAPb(I 1.5 Br 1.5 ) perovskites with varying microstructures under constant illumination at room temperature and at elevated temperature. Our findings reveal a more complicated picture of the segregation mechanism occurring in three stages instead of two as commonly reported. The process starts with a flash formation of I-rich domains. Following is a rapid blue shift before the gradual and typically observed red shift occurs. The evolution of the three stages is fully reversible in the dark and is also present at elevated temperatures (50 °C). We explain the existence of multiple stages during light-induced halide segregation by natural compositional fluctuations of the halides and the formation of halide clusters with a dynamically changing distribution in I–Br content. The variation in the I–Br ratio depends on the grain size and film heterogeneity. Overall, these findings add further details in the quest of unraveling the underlying segregation mechanism(s), which need to be identified to stabilize halides in wide band gap perovskites.
We report on an experimental and theoretical study of strong-field laser ionization of CF 3 Br followed by resonant x-ray absorption at the Br K-edge. Distinct 1s -> 4p, 5p Rydberg transitions of Br q+ (q = 1-4) atomic ions are observed and identified with Hartree-Fock-Slater and relativistic configuration interaction calculations. Time-dependent density functional theory and ab initio molecular dynamics calculations were performed to simulate the dissociative ionization process and the molecular orbitals for the q = 1-4 charge states. Measurements were made with both parallel and perpendicular linear polarizations of the laser and x-rays, but dichroism was not observed, indicating negligible alignment by the laser ionization process. This result is explained by calculations on atomic Br and the molecular simulation.
In 4$\textit{d}$ /5$\textit{d}$ transition-metal systems, many interesting physical properties arise from the interplay of bandwidth, electronic correlations, and spin-orbit interactions. Here, using ab initio density functional theory, we systematically study the double-perovskite-like system K 2 OsX6 ($\textit{X}$ = F, Cl, and Br) with a $5d^4$ electronic configuration. In this work, our main result is that the $\textit{J}$ = 0 nonmagnetic insulating state develops in this system, induced by strong spin-orbit coupling (SOC). Specifically, the well-separated OsX 6 octahedra lead to the cubic crystal-field limit and result in dramatically decreasing hoppings among nearest neighbor Os-Os sites. In this case, the three degenerate $t_{2g}$ orbitals are reconstructed into two “effective” $j_{\text{eff}}$ ($j_{\text{eff}}$ = 1/2 and $j_{\text{eff}}$ = 3/2 states) states separated by the strong SOC, opening a gap with four electrons occupying the$j_{\text{eff}}$ = 3/2 orbitals. Furthermore, the hybridization between the Os 5$\textit{d}$ orbitals and the $\textit{X}$ ($\textit{X}$ = F, Cl, and Br) $\textit{p}$ orbitals increases from F to Br, leading the electrons in K 2 OsF 6 to be more localized than in K 2 OsCl 6 and K 2 OsBr 6 , resulting in a smaller bandwidth for K 2 OsF 6 than in the Cl- or Br-cases. Our results provide guidance to experimentalists and theorists working on this interesting family of osmium halides.