Search NASA⌕ Search

SEARCH · Search NASA

Results for “Backscattering coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Relating the radar backscattering coefficient to leaf-area index

The relationship between the radar backscattering coefficient of a vegetation canopy, sigma(0) sub can, and the canopy's leaf area index (LAI) is examined. The relationship is established through the development of a model for corn and sorghum and another for wheat. Both models are extensions of the cloud model of Attema and Ulaby (1978). Analysis of experimental data measured at 8.6, 13.0, 17.0, and 35.6 GHz indicates that most of the temporal variations of sigma(0) sub can can be accounted for through variations in green LAI alone, if the latter is greater than 0.5.

Ulaby, F. T.↗

Microwave backscatter coefficients of artificially grown first-year sea ice

The radar backscattering coefficient of simulated first year sea ice was measured at 5.2, 9.6, 13.6, and 16.6 GHz, using a dual-antenna FM-CW scatterometer. The measurements were corrected for antenna separation and beamwidth, to obtain true values of scattering coefficient. Above 15 deg, snow-covered and rough gray ice have similar angular responses, while the decrease in scattering coefficient with incidence angle is more rapid for smoother surfaces. True scattering coefficients and surface roughness data estimated with an antenna-beamwidth correction based on a physical-optics model give values close to those measured.

Xue, D.↗

Relating the microwave backscattering coefficient to leaf area index

This paper examines the relationship between the microwave backscattering coefficient of a vegetation canopy, sigma (can, 0) and the canopy's leaf area index (LAI). The relationship is established through the development of one model for corn and sorghum and another for wheat. Both models are extensions of the cloud model of Attema and Ulaby (1978). Analysis of experimental data measured at 8.6, 13.0, 17.0, and 35.6 GHz indicates that most of the temporal variations of sigma (can, 0) can be accounted for through variations in green LAI alone, if the latter is greater than 0.5.

Ulaby, F. T.↗

Modeling canopy reflectance and microwave backscattering coefficient

Various approaches to model canopy reflectance (CR) in the visible/infrared region and backscattering coefficient (BSC) in the microwave region are compared and contrasted. It is noted that BSC can be related to CR in the source direction (the 'hot spot' direction). By assuming a frequency dependent leaf reflectance and transmittance it is shown that the observed dependence of BSC on leaf area index, leaf angle distribution, angle of incidence, soil moisture content, and frequency can be simulated by a CR model. Thus both BSC and CR can, in principle, be calculated using a single model which has essentially the same parameters as many CR models do.

Goel, N. S.↗

Variations of temporal, spectral and angular radar backscattering coefficient of vegetation

Results of an experimental program is reviewed which over the past five years has succeeded in documenting the variations of the radar backscattering coefficient of a variety of crop types as a function of time, signal frequency (1-18 GHz), angular range (nadir to 80 deg) and polarization (HH, VV and HV). The systems were the microwave active spectrometers (MAS); one MAS system covers the 1-8 GHz band and the other system covers the 8-18 GHz band. Each MAS system was mounted on a mobile truck-mounted boom and was operated by a computer controller. To date, these two systems have acquired over 3 million data points from agricultural crops, bare ground and trees.

Ulaby, F. T.↗

Develop a plan for establishing global aerosol backscatter coefficient data base

A potential improvement on measuring atmospheric winds by using a coherent Doppler system has led to a need for detailed knowledge concerning the aerosol backscattering characteristics, especially at CO2 wavelengths. In order to meet this requirement, a plan of study has been developed to establish a global data base of atmospheric aerosol backscattering coefficients.

Chang, Ho-Pen↗

A Parameterized Inversion Model for Soil Moisture and Biomass from Polarimetric Backscattering Coefficients

A semi-empirical algorithm for the retrieval of soil moisture, root mean square (RMS) height and biomass from polarimetric SAR data is explained and analyzed in this paper. The algorithm is a simplification of the distorted Born model. It takes into account the physical scattering phenomenon and has three major components: volume, double-bounce and surface. This simplified model uses the three backscattering coefficients ( sigma HH, sigma HV and sigma vv) at low-frequency (P-band). The inversion process uses the Levenberg-Marquardt non-linear least-squares method to estimate the structural parameters. The estimation process is entirely explained in this paper, from initialization of the unknowns to retrievals. A sensitivity analysis is also done where the initial values in the inversion process are varying randomly. The results show that the inversion process is not really sensitive to initial values and a major part of the retrievals has a root-mean-square error lower than 5% for soil moisture, 24 Mg/ha for biomass and 0.49 cm for roughness, considering a soil moisture of 40%, roughness equal to 3cm and biomass varying from 0 to 500 Mg/ha with a mean of 161 Mg/ha

soil moisture↗

Backscattering coefficient of a perturbed sinusoidal surface

A coherent model for scattering from a randomly perturbed periodic surface is developed using the Kirchhoff approximation. It is intended to model wave scattering from ground surfaces with row directions. Results are illustrated and compared with an incoherent scatter model and measured backscattering angular curves from ploughed fields.

Eom, H. J.↗

Accurate Estimation of Backscattering Coefficient Using Airsar Data

In terrain with relief variations radar signals are distorted due to the projection of the scene topography into the slant range-Doppler plane. The effect of these variations is to change the physical size of the scattering area, leading to errors in the radar backscatter values and incidence angle. For this reason the local incidence angle, derived form sensor position and Digital Elevation Model (DEM) data must always be considered.

Synthetic Aperture Rada Backscatter↗

Terrain effects on backscattering coefficients derived from multifrequency, polarimetric SAR data

A set of multidate, multilook angle polarimetric SAR data, acquired in Pennsylvania during July 1990 was recorded to determine the effect of local incidence angle. Cosine-based and polynomial models are found to be equally good for correcting SAR data for local incidence angle effects. A modified approach, considering the correction factor as additive rather than multiplicative, gave better results. The standard error in the estimation of soil moisture improves from 8.1 to 5.8 after applying corrections to incidence angle effects.

Rao, K. S.↗

Interpretable ensemble learning unveils main aerosol optical properties in predicting cloud condensation nuclei number concentration

Variations in cloud condensation nuclei number concentration (N CCN ) significantly influence cloud microphysics, yet direct N CCN measurements remain challenging. Here, we present an N CCN ensemble learning (NEL) model utilizing ensemble learning and interpretability analysis on aerosol optical parameters. Validated at two land sites, two ocean sites and one polar site within the Atmospheric Radiation Measurement program, the mean absolute percentage error range of the NEL model across different environments is from 12% to 36%, demonstrating high accuracy. Key findings reveal that aerosol optical parameters can serve as predictors for N CCN . Aerosol scattering and backscattering coefficients, absorption coefficient, backscatter fraction (BSF), and Ångström exponent (AE) are positively correlated with N CCN , while single scattering albedo shows negative correlations. N CCN prediction at land sites is highly sensitive to BSF, largely driven by the backscattering coefficient, as fine particles dominate in these sites. At ocean sites, N CCN prediction is more sensitive to AE, primarily influenced by the scattering coefficient, due to the higher proportion of larger particles. At the polar site, N CCN prediction shows sensitivity to both BSF and AE, mainly driven by the scattering coefficient, as polar sites are cleaner and contain larger particles. These differences reflect the variation in particle size and number concentration across different environments.

Atmospheric science↗

Ocean Subsurface Study from ICESat-2 Mission

NASA has launched the ICESat-2 mission in September 2018 with the primary purpose of monitoring changes in the cryosphere. Fortunately, the measured photons over ocean region provide great opportunity for the ocean subsurface study. We have proposed a novel algorithm to determine ocean subsurface optical properties, such as, diffuse attenuated coefficient, kd (/m), total backscattering coefficients bb (/m), attenuated backscatter coefficient and particulate backscattering coefficients b(sub bp) (/m) from ICESat-2/ATLAS lidar measurements. Our ICESat-2 ocean subsurface results reveal high vertical resolution of these optical properties through the water column that are hidden from the passive ocean color record. Moreover, we can estimate the particulate organic carbon (POC) and phytoplankton carbon biomass based on the ICESat-2 retrieved particulate backscattering coefficients b( sub bp) results. We will present and discuss the first ICESat-2 ocean subsurface profile results, especially in polar region where passive ocean color measurements are difficult to make. We will also present the multiple scattering effects on the ocean subsurface optical properties retrieval.

Xiaomei Lu↗

Quantitative comparisons of radar image, scatterometer, and surface roughness data from Pisgah Crater, CA

The relationships between radar image brightness and backscatter coefficient, between the backscatter coefficient and surface roughness, and between surface roughness and geology, must be established in order to satisfy criteria for the quantitative use of radar images. Attention is presently given to the merits of calibrated radar images and scatterometers as sources of the backscatter coefficient, theories that yield the coefficient on the basis of known surface roughness (and vice versa), and the geologic interpretation of surface roughness and backscatter signatures. These considerations are discussed in the case of the Pisgah Crater and lava field in the Mojave Desert of California.

Farr, T. G.↗

Three-wavelength Lidar Measurements of Pinatubo Aerosol and Its Optical Properties

Enhanced stratospheric aerosols due to Mt. Pinatubo eruption have been measured using a YAG laser-based three wavelength lidar and a YAG laser-based large-scale lidar. Temporal variation of the integrated backscatter coefficient derived from the backscatter coefficient profiles were obtained. The present paper describes some results of optical properties analysis using lidar data obtained since Dec., 1991 when the main body of aerosols started to appear over Japan. The derived properties of the Pinatubo aerosols are extinction to backscatter ratios, wavelength dependencies of backscatter coefficients and extinction coefficients, and optical thickness. The analysis is based on the assumption of similarity in backscatter profiles for three wavelengths which are derived from lidar signals using the Fernald equation with assumed extinction to backscatter ratios.

Sasano, Y.↗