Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass chemical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Satellite Investigations of Aerosol Radiative Forcing

Biomass burning aerosols have a wide spatial distribution that is governed by the geographic distribution of their source regions and tropospheric circulation. Annually, more than 114 teragrams of smoke is produced that have residence times ranging from days to weeks depending upon their size and chemical composition. These aerosols reflect the incoming solar directly which is called the "direct effect" and they also modify the reflective properties of clouds which is called the "indirect effect". The direct top of atmosphere (TOA) globally averaged radiative forcing estimate range from -0.2 to -1.1 W/sq m . The uncertainties in this estimate are due to the various assumptions (see Introduction) involved in the calculations. While the TOA radiative forcing estimates provide valuable information on the effects of aerosols on climate, equally important are the downward shortwave irradiances (DSWI) at the surface and the atmospheric heating/cooling rate profiles. For example, the DSWI irradiance calculations show large discrepancies between measurements and calculations in the presence of biomass burning aerosols due to the inaccurate characterization of aerosols in radiative transfer models. The DSWI is an important component of the surface radiation balance and the atmospheric effects govern both local and regional circulation patterns. Very few studies have attempted to estimate the surface and atmospheric effects of biomass burning aerosols largely due to the lack of information on the microphysical and chemical properties of biomass burning aerosols. The major focus of this effort is to estimate the direct TOA radiative forcing of aerosols using satellite measurements.

Christopher, Sundar A.↗

Deforestation and Biogenic Trace Emissions from Brazilian Cerrado

The overall goal of NASA's SCAR (Smoke, Cloud and Radiation) Program is to obtain physical and chemical properties of the smoke produced by biomass burning and the effects of the smoke on the earth's radiation balance and climate. It is a joint project with the Brazilian government and their organizations, including INPE (Instituto Nacional Pesquisas Espaciais) who actively participate in all activities. Appropriate estimates of the biomass buming in the tropics is therefore essential to determine its effect on the atmosphere and on climate. The SCAR series of experiments is designed with that purpose. The present study of evaluating the burnt-out areas is to augment the data collected to date to help evaluate the effect of biomass burning.

Sinha, Ravi↗

Using mid-infrared spectroscopy to estimate soil microbial properties at the continental scale

Understanding microbial community properties is critical to improving the predictions of biogeochemical processes for enhancing soil carbon sequestration. Here, in this observational study, mid-infrared (MIR) spectroscopy and partial least squares regression was used to predict soil microbial and chemical properties from diverse ecosystems across the continental USA. Random calibration and validation demonstrated the prediction potential for soil properties using MIR spectra, with the strongest predictions for microbial respiration, followed by microbial biomass carbon and nitrogen, ß-glucosidase activity, as well as soil chemical properties including organic carbon and total nitrogen. Microbial properties were mainly positively correlated to spectral regions associated with aliphatic C-H groups and C=O stretches of polysaccharides and negatively correlated to quartz and silicate-associated regions. We conclude that MIR spectroscopy can characterize soil microbial functions and be useful for the improvement of continental-scale soil carbon modeling and prediction programs.

59 BASIC BIOLOGICAL SCIENCES↗

Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing: Preprint

Efforts toward decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a more reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of polycarboxylate ether admixtures with a smaller carbon footprint. The present study examines the use of lignin-based water-reducing admixture in cement pastes and mortar mixtures for 3D printing. The experimental program explores the use of different dosages of lignin-based admixture to produce 3D-printed samples with appropriate extrudability and buildability. The rheological characterization was performed to determine the flow curve of various mixtures. Finally, the heat of hydration of cement pastes was monitored via isothermal calorimetry to assess the impact of lignin-based admixtures on the hydration process of cement. The results of this study indicate that the use of biomass by-products, such as lignin-based admixtures have great potential to effectively control the fresh-state properties of cement-based materials.

bio-based admixtures↗

Simultaneous Retrievals of Biomass Burning Aerosols and Trace Gases From the Ultraviolet to Near-Infrared Over Northern Thailand During the 2019 Pre-Monsoon Season

With the advent of spaceborne spectroradiometers in a geostationary constellation, measuring high spectral resolution ultraviolet–visible (UV-VIS) and selected near-/shortwave-infrared (NIR/SWIR) radiances can enable the probing of the life cycle of key atmospheric trace gases and aerosols at higher temporal resolutions over the globe. The UV-VIS measurements are important for retrieving several key trace gases (e.g., O 3 , SO 2 , NO 2 , and HCHO) and particularly for deriving aerosol characteristics (e.g., aerosol absorption and vertical profile). This study examines the merit of simultaneous retrievals of trace gases and aerosols using a ground-based spectroradiometer covering the UV-NIR to monitor their physicochemical processes and to obtain reliable aerosol information for various applications. During the 2019 pre-monsoon season over northern Thailand, we deployed a ground-based SMART–s (Spectral Measurements for Atmospheric Radiative Transfer–spectroradiometer) instrument, which is an extended-range Pandora with reliable radiometric calibration in the 330–820 nm range, to retrieve remotely sensed chemical and aerosol properties for the first time near biomass burning sources. The high spectral resolution (∼ 1.0 nm full width half maximum with ∼ 3.7 × oversampling) of sun and sky measurements from SMART–s provides several key trace gases (e.g., O 3 , NO 2 , and H 2 O) and aerosol properties covering the UV where significant light absorption occurs by the carbonaceous particles. During the measurement period, highly correlated total column amounts of NO 2 and aerosol optical thickness (т aer ) retrieved from SMART–s (correlation coefficient, R=0.74) indicated their common emissions from biomass burning events. The SMART–s retrievals of the spectral single scattering albedo (ω 0 ) of smoke aerosols showed an abrupt decrease in the UV, which is an important parameter dictating photochemical processes in the atmosphere. The values of ω 0 and column precipitable water vapor (H 2 O) gradually increase with the mixing of biomass burning smoke particles and higher water vapor concentrations when approaching the monsoon season. The retrieved ω 0 and weighted mean radius of fine-mode aerosols from SMART–s showed positive correlations with the H 2 O (R=0.81 for ω 0 at 330 nm and 0.56 for the volume-weighted mean radius), whereas the real part of the refractive index of fine-mode aerosol (n f ) showed negative correlations (R = -0.61 at 330 nm), which suggest that aerosol aging processes including hygroscopic growth (e.g., humidification and cloud processing) can be a major factor affecting the temporal trends of aerosol optical properties. Retrieved n f and ω 0 were closer to those of the water droplet (i.e., n f of about 1.33 and ω 0 of about 1.0) under lower amounts of NO 2 during the measurement period; considering that the NO 2 amounts in the smoke may indicate the aging of the plume after emission due to its short lifetime, the tendency is also consistent with active hygroscopic processes of the aerosols over this area. Retrieved UV aerosol properties from SMART–s generally support the assumed smoke aerosol models (i.e., the spectral shape of aerosol absorption) used in NASA's current satellite algorithms, and their spectral ω 0 retrievals from ground and satellites showed good agreements (R = 0.73–0.79). However, temporal and spectral variabilities in the aerosol absorption properties in the UV emphasize the importance of a realistic optical model of aerosols for further improvements in satellite retrievals.

biomass burning↗

TEM Study of SAFARI-2000 Aerosols

The aim of our research was to obtain data on the chemical and physical properties of individual aerosol particles from biomass smoke plume s in southern Africa and from air masses in the region that are affec ted by the smoke. We used analytical transmission electron microscopy (ATEM), including energy-dispersive X-ray spectrometry (EDS) and ele ctron energy-loss spectroscopy (EELS), and field-emission electron microscopy (FESEM) to study aerosol particles from several smoke and haz e samples and from a set of cloud samples.

Buseck, Peter R.↗

Case Study: Calorimetry

This chapter presents the use of adsorption microcalorimetry to study acid-base catalysis over mixed metal oxides. Understanding the acid-base properties of catalysts is of paramount importance for steering product selectivity in a wide variety of catalytic industrial processes. In particular, catalytic conversion of biomass into biofuels and chemicals demands comprehensive understanding of the acid-base properties of the catalyst to selectively convert functional groups. Herein, the use of probe molecules to measure the strength and density of acid and basic sites on mixed metal oxide surfaces is introduced. Further, the challenges when characterizing mixed metal oxides, presenting surface reconstruction, are explained. An example displays how combining adsorption calorimetry with ab initio calculations explains the activation of a reactant on the surface of a mixed metal oxide. Acid-base catalysis over nanoshapes is studied to unveil that different nanoshapes lead to different extents of surface reconstruction, which ultimately affect acid-base catalysis. The use of steady-state isotopic transient kinetic analysis (SSITKA), in combination with adsorption microcalorimetry, unveils that surface reconstruction of a set of perovskites impacts the density of active sites to a greater extent than the intrinsic reactivity of the active site. At the end of this chapter, fundamental insights into catalyst transient behavior during isomerization of n-butane, and the reaction mechanism for conversion of 4-methylpentan-2-ol, are presented.

Polo Garzon, Felipe↗

Dynamic Life-Cycle Analysis of Fast Pyrolysis Biorefineries: Impacts of Feedstock Moisture Content and Particle Size

The commercialization of biorefineries has been met with significant obstacles due to the technical difficulties of handling solid biomass feedstocks, which are highly variable in physical properties and chemical compositions. An understanding of the principles of unit operations along the supply chain is key to the success of the biofuel industry. This study applies a dynamic life-cycle analysis (DLCA) methodology by developing quantitative relationships between the inputs and outputs for each unit operation based on scientific understanding of the causal effects. Using the DLCA, we assessed system sustainability of drop-in fuel production from fast pyrolysis of pine residues followed by hydro-processing. Life-cycle greenhouse gas (GHG) emissions were calculated for 4641 runs involving two key feedstock parameters: moisture content after field drying and particle size of the feed to pyrolyzer. Moisture contents varied between 25% and 35%, while particle sizes varied between 0.5 and 5 mm in these runs. The life-cycle GHG emissions of these cases vary from 22 to 40 g/MJ. Close examination of each unit operation's contribution to the total GHG emissions reveals that low moisture content after field drying produces savings in energy consumption during feedstock transportation and on-site drying. However, although small particle size leads to overall higher fuel yield, it also requires a significant amount of energy for feedstock size reduction and fuel production. The energy penalty outweighs the benefit of increased fuel yields, especially when fine particles (<1 mm) are used for pyrolysis; thus, small particle size leads to increased GHG emissions overall. The results highlight the trade-offs between the energy demand for preprocessing and the conversion yields, which can be addressed with DLCA.

09 BIOMASS FUELS↗

Effect of H 2 O on the ethylene glycol/alkali dismantling of bagasse for high-value conversion

Using a high-boiling alcohol system to dismantle main components of biomass is a feasible technology. Reducing dismantle operating costs and improving dismantle efficiency are essential for promoting the green, economical, and sustainable development of biomass refining. Therefore, based on the low cost and chemical properties of H 2 O at high temperature, the effects of different H 2 O dosages in NaOH-catalyzed ethylene glycol (HBAA) system on the dismantling efficiency of bagasse, surface lignin coverage, recovered-lignin activity and enzymatic hydrolysis efficiency were investigated. Compared with the HBAA dismantling system without H 2 O, the HBAA system with 60% w/v H 2 O can obviously increase the removal rates of lignin and hemicellulose, while recovering up to 99% of cellulose and significantly declining surface lignin coverage, thus enhancing the enzymatic hydrolysis efficiency. Additionally, the results of density functional theory calculations and 2D HSQC NMR analysis prove that the synergy between H 2 O and ethylene glycol can promote the esterification reaction occurrence at the α-C carbon cation in β-O-4 structure of lignin, thereby protecting the β-O-4 aromatic ether bond. Simultaneously, when the H 2 O dosage increase from 0% to 60%, the enzymatic yield increases from 84.51% to 93.74% with an enzyme load of 10 FPU/g. Based on experimental results, this study conducted a techno-economic analysis of bagasse dismantling for ethanol and co-production of lignin, achieving a minimum ethanol selling price of $\$$1.07 per kg. Here, in this study, a green and economical solution for dismantling the main components of bagasse is developed, which is important for the high-value conversion of bagasse.

Ethylene glycol↗

Radiative Effect of Springtime Biomass-Burning Aerosols over Northern Indochina During 7-SEAS Baseline 2013 Campaign

The direct aerosol radiative effects of biomass-burning (BB) aerosols over northern Indochina were estimated by using aerosol properties (physical, chemical, and optical) along with the vertical profile measurements from ground-based measurements with integration of an optical and a radiative transfer model during the Seven South East Asian Studies Biomass-Burning Aerosols Stratocumulus Environment: Lifecycles Interactions Experiment (7-SEASBASELInE) conducted in spring 2013. Cluster analysis of backward trajectories showed the air masses arriving at mountainous background site (Doi Ang Khang; 19.93degN, 99.05degE, 1536 m above mean sea level) in northern Indochina, mainly from near-source inland BB activities and being confined in the planetary boundary layer. The PM(sub10) and black carbon (BC)mass were 87 +/- 28 and 7 +/- 2 micrograms m(exp -3), respectively. The aerosol optical depth (AOD (sub 500) was found to be 0.26--1.13 (0.71 +/- 0.24). Finer (fine mode fraction is approximately or equal to 0.95, angstrom-exponent at 440-870 nm is approximately or equal to 1.77) and significantly absorbing aerosols(single scattering albedo is approximately or equal to 0.89, asymmetry-parameter is approximately or equal to 0.67, and absorption AOD 0.1 at 440 nm) dominated over this region. BB aerosols (water soluble and BC) were the main contributor to the aerosol radiative forcing (ARF), while others (water insoluble, sea salt and mineral dust) were negligible mainly due to their low extinction efficiency. BC contributed only 6 to the surface aerosol mass but its contribution to AOD was 12 (2 times higher). The overall mean ARF was 8.0 and -31.4 W m(exp -2) at top-of-atmosphere (TOA) and at the surface (SFC), respectively. Likely, ARF due to BC was +10.7 and -18.1 W m(exp -2) at TOA and SFC, respectively. BC imposed the heating rate of +1.4 K d(exp -1) within the atmosphere and highlighting its pivotal role in modifying the radiation budget. We propose that to upgrade our knowledge on BB aerosol radiative effects in BB source region, the long-term and extensive field measurements are needed.

aerosol optical properties↗

A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs

Environmental concerns over waste plastics’ effect on the environment are leading to the creation of biodegradable plastics. Biodegradable plastics may serve as a promising approach to manage the issue of environmental accumulation of plastic waste in the ocean and soil. Biodegradable plastics are the type of polymers that can be degraded by microorganisms into small molecules (e.g., H 2 O, CO 2 , and CH 4 ). However, there are misconceptions surrounding biodegradable plastics. For example, the term “biodegradable” on product labeling can be misconstrued by the public to imply that the product will degrade under any environmental conditions. Such misleading information leads to consumer encouragement of excessive consumption of certain goods and increased littering of products labeled as “biodegradable”. Here this review not only provides a comprehensive overview of the state-of-the-art biodegradable plastics but also clarifies the definitions and various terms associated with biodegradable plastics, including oxo-degradable plastics, enzyme-mediated plastics, and biodegradation agents. Analytical techniques and standard test methods to evaluate the biodegradability of polymeric materials in alignment with international standards are summarized. The review summarizes the properties and industrial applications of previously developed biodegradable plastics and then discusses how biomass-derived monomers can create new types of biodegradable polymers by utilizing their unique chemical properties from oxygen-containing functional groups. The terminology and methodologies covered in the paper provide a perspective on directions for the design of new biodegradable polymers that possess not only advanced performance for practical applications but also environmental benefits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learning Reduced Order Model for Cost and Emission Assessment of a Pyrolysis System

Biomass pyrolysis is a promising approach for producing economic and environmentally-friendly fuels and bioproducts. Biomass pyrolysis experiments show that feedstock properties have a significant impact on product yields and composition. Scientists are developing detailed chemical reaction mechanisms to capture the relationships between biomass composition and pyrolysis yields. These mechanisms can be computationally intensive. In this study, we investigate the use of a machine learning reduced order model (ROM) for assessing the costs and emissions of a pyrolysis biorefinery. Here, we developed a Kriging-based ROM to predict pyrolysis yields of 314 feedstock samples based on the results of a detailed chemical kinetic pyrolysis mechanism. The ROM is integrated into a chemical process model for calculating mass and energy yields in a commercial-scale (2000 tonne/day) biorefinery. The ROM estimated biofuel yields of 65 to 130 gallons per ton of dry biomass. This results in biofuel minimum fuel-selling prices of $2.62 to $5.43 per gallon and emissions of -13.62 to 145 kg of CO 2 per MJ. The ROM achieved an average mean square error of 1.8e-20 and a mean absolute error of 0.53%. These results suggest that ROMs can facilitate rapid feedstock screening for biorefinery systems.

09 BIOMASS FUELS↗

Monolignol acyltransferase for lignin p-hydroxybenzoylation in Populus

Plant lignification exhibits significant plasticity. Lignin in many species including Populus spp. has long been known decorated with p-hydroxybenzoates. However, the molecular basis for such structural modification remains undetermined. Here we report the identification and characterization of a Populus BAHD family acyltransferase that catalyzes monolignol p-hydroxybenzoylation, thus controlling the formation of p-hydroxybenzoylated lignin structures. We reveal that Populus acyltransferase PHBMT1 kinetically preferentially utilizes p-hydroxybenzoyl-CoA to acylate syringyl lignin monomer sinapyl alcohol in vitro. Consistently, disrupting PHBMT1 in Populus via CRISPR/Cas9 gene editing nearly completely depletes p-hydroxybenzoates of stem lignin; conversely, overexpression of PHBMT1 enhances stem lignin p-hydroxybenzoylation, suggesting PHBMT1 functions as a prime monolignol p-hydroxybenzoyltransferase in planta. Altering lignin p-hydroxybenzoylation significantly changes lignin solvent dissolution rate, indictive of its structural significance on lignin physiochemical properties. Identification of monolignol p-hydroxybenzoyltransferase offers a valuable tool for tailoring lignin structure and physiochemical properties and for engineering the industrially important platform chemical in woody biomass.

59 BASIC BIOLOGICAL SCIENCES↗

CFD-DEM Modeling of Autothermal Pyrolysis of Corn Stover with a Coupled Particle- and Reactor-Scale Framework

Autothermal operation of fast pyrolysis is an efficient process-intensification technique wherein exothermic oxidation reactions are used to overcome the heat-transfer bottleneck of conventional pyrolysis. The development of accurate, reliable modeling toolsets is imperative to generating a deeper understanding of biomass autothermal pyrolysis systems to support scale-up and industrial deployment. This modeling effort describes the development of single-particle and reactor models which incorporate detailed reaction schemes and simultaneous exothermic oxidation reactions. The particle-scale model was parameterized for corn stover feedstock with particle morphology, density, ash content, and biopolymer composition, all of which impact the emergent conversion characteristics during pyrolysis. Results were then used to parameterize a reactor-scale autothermal pyrolysis model, which was developed using a coarse-grained computational fluid dynamic-discrete element method. The simulation results compared well with experimental results, with the predicted bio-oil, light gas, and biochar yield within 3.0 wt% of the experimental yields. Further analyses were performed to test the influence of equivalence ratio, biomass injection position, and particle size distribution on autothermal pyrolysis. The analysis of the physio-chemical properties of the fluid and solid phase inside the reactor and at the reactor outlet help reveal important process interactions of autothermal pyrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Diel cycle impacts on the chemical and light absorption properties of organic carbon aerosol from wildfires in the western United States

Abstract. Organic aerosol (OA) emissions from biomass burning have been the subject of intense research in recent years, involving a combination of field campaigns and laboratory studies. These efforts have aimed at improving our limited understanding of the diverse processes and pathways involved in the atmospheric processing and evolution of OA properties, culminating in their accurate parameterizations in climate and chemical transport models. To bring closure between laboratory and field studies, wildfire plumes in the western United States were sampled and characterized for their chemical and optical properties during the ground-based segment of the 2019 Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) field campaign. Using a custom-developed multiwavelength integrated photoacoustic-nephelometer spectrometer in conjunction with a suite of instruments, including an oxidation flow reactor equipped to generate hydroxyl (OH⚫) or nitrate (NO3⚫) radicals to mimic daytime or nighttime oxidative aging processes, we investigated the effects of multiple equivalent hours of OH⚫ or NO3⚫ exposure on the chemical composition and mass absorption cross-sections (MAC(λ)) at 488 and 561 nm of OA emitted from wildfires in Arizona and Oregon. We found that OH⚫ exposure induced a slight initial increase in absorption corresponding to short timescales; however, at longer timescales, the wavelength-dependent MAC(λ) decreased by a factor of 0.72 ± 0.08, consistent with previous laboratory studies and reports of photobleaching. On the other hand, NO3⚫ exposure increased MAC(λ) by a factor of up to 1.69 ± 0.38. We also noted some sensitivity of aerosol aging to different fire conditions between Arizona and Oregon. The MAC(λ) enhancement following NO3⚫ exposure was found to correlate with an enhancement in CHO1N and CHOgt1N ion families measured by an Aerodyne aerosol mass spectrometer.

54 ENVIRONMENTAL SCIENCES↗

Understanding Biomass Burning Aerosol via Integrated Analyses of Aerosol Mass Spectrometry Data from DOE Campaigns and ACRF Long Term Measurements

Biomass burning (BB) is one of the largest sources of aerosol particles in the atmosphere and a significant source of trace gases important to atmospheric chemistry. Organic aerosols from biomass burning sources (BBOA) are an important but poorly characterized component of the earth’s climate system. BBOA composition and life cycle processes are associated with enormous complexities and contribute significantly to model uncertainties. Hence it is important to improve the ability to simulate the concentration and properties (chemical, optical, and hygroscopic) of BBOA and the atmospheric aging processes that affect these properties. Here, we propose to analyze ambient data collected from the DOE Biomass Burning Observation Project (BBOP) field campaign and from a long term measurement site of the Atmospheric Radiation Measurement (ARM) program – the Southern Great Plains (SGP), where transported BB plumes and elevated BBOA episodes were frequently observed. This project is aimed at 1) gaining detailed, quantitative understanding of the chemical and physical properties of BBOA and their chemical changes during atmospheric aging via advanced analysis of aerosol measurement data acquired at the summit of Mt. Bachelor (MBO) during the BBOP campaign and through integration with concurrent measurements of trace gases, particle properties, and meteorological conditions performed at MBO and from the G-1 aircraft; 2) gaining better understanding of BBOA properties and its roles in radiative forcing via analysis of routine data from the ARM long-term measurement sites; and 3) integrating the results from 1) and 2) into a global database of aerosol mass spectrometry and collaborate with modelers on evaluating and improving numerical model performance as part of the ASR program.

54 ENVIRONMENTAL SCIENCES↗

Use of Lignin-Based Admixture as Water Reducer (WRA) for Tailoring the Rheological Properties of Mortars for 3D-Printing

Efforts towards decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced mortar and concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a highly reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of commonly used polycarboxylate ethers (PCEs) with a smaller carbon footprint. These lignin-based plasticizers developed at NREL can be used in place of petrochemical-derived superplasticizers to tailor the rheological properties of cement-based systems for applications such as additive manufacturing while reducing the carbon intensity of the concrete mix. Lignosulfonates derived from paper pulping were historically used as water reducers only to be displaced with the rise of PCEs. The present study examines the use of a NREL produced lignin-based water reducing admixture (WRA), in cement pastes and mortar mixtures for 3D-printing at small- (mm) scale. The experimental program consisted of different formulations of oxidized lignin-based WRAs added in variable dosages to cement pastes with a fixed water-to-cement ratio. The objective is to achieve an appropriate workability, extrudability and buildability of mortar mixtures to produce 3D-printed specimens. The rheological characterization was performed to compare the initial yield stress and viscosity of the different mixtures with lignin-based admixture with respect to conventional PCE superplasticizers. The rheological characterization shows that the proposed material act as an effective water-reducer in cement systems, affecting the yield stress, plastic viscosity, and structuration rate of the mixtures evaluated. On the other hand, the effect on early hydration process of the cement pastes containing lignin-based admixtures is comparable to conventional superplasticizers.

3D-printing↗

Plant versus local soil inorganic ionic composition: The relationship to biomass smoke

Here, we examine the relationship between soil and plant inorganic chemical composition as a precursor to biomass smoke aerosol particle (PM 2.5 ) properties in desert landscapes of the Southwestern United States. Past work underscored the importance of plant species and in particular the dependence of smoke PM 2.5 water uptake on the water-soluble inorganics important in select plant species (e.g., halophytes) versus absent in other species (e.g., conifers). This study extends this work by looking at a range of soil types and salinity in examining native and invasive species in the Desert Southwest US region. Eighteen plant samples and surrounding soils were taken from four ecosystems in New Mexico, USA. Results here support the conclusion that plant species are the primary controller over the inorganic plant composition that is relevant to biomass smoke and controls its hygroscopicity. The role of soil type is secondary to plant inorganic composition but is found to be important on the ecosystem level in determining what plant species are viable in a given ecosystem. This ultimately affects the smoke properties, including PM 2.5 hygroscopicity (water uptake), produced in landscape fires. Knowledge of ecosystem features including plant species distribution and soil salinity may be combined as a first-order predictor of PM 2.5 hygroscopicity of the primary smoke emissions. This can be particularly useful when combined with knowledge of burn characteristics such as flame temperature, which also plays a key role in determining PM 2.5 water uptake response.

54 ENVIRONMENTAL SCIENCES↗