Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Identifying the Best High‐Biomass Sorghum Hybrids Based on Biomass Yield Potential and Feedstock Quality Affected by Nitrogen Fertility Management Under Various Environments

The growing interest in high-biomass sorghum ( Sorghum bicolor L. Moench), hereafter referred to as sorghum, as a bioenergy feedstock in the United States requires an understanding of geographical adaptation to identify the most suitable hybrids for the Midwest. In this study, 13 sorghum hybrids (H1–H13) were evaluated for biomass yield potential in central and southern IL over two growing seasons (2022 and 2023). In addition to biomass yield, the effects of nitrogen (N) fertilization on yield, nutrient removal (N, P, and K), and feedstock composition (cellulose, hemicellulose, lignin, and soluble fractions) were determined to identify the best-performing sorghum hybrid across environmental gradients. The experimental design was a split-plot arrangement within a randomized complete block design with four replications at each of two locations: N rates (0 and 112 kg-N ha −1 ) as a whole plot factor and 13 sorghum hybrids as a subplot factor. As a result, complex genotypes (13 hybrids) by environment (2 sites and 2 years) and management (2 N rates) interactions were observed in biomass yield. The best hybrids at both sites were H1 (ATx2932/F10702_PSL) and H13 (TX08001), which were very photoperiod sensitive (PS). These hybrids produced superior biomass yield, and they also exhibited less nutrient removal and high energy-rich feedstock compositions (cellulose, hemicellulose, and lignin). Biomass yield potential was associated with morphological and phenological traits according to environmental conditions. Low-yielding hybrids were short-stature (H5 and H6) with pollinators (F10801_PSL-3dw and F10805_PSL-3dw) that are recessive at the Dw3 locus. Moderate PS hybrids (H7, H8, H11, and H12) that produced grain panicles at harvest showed high biomass yield plasticity and excessive nutrient removal as they accumulated high K concentrations in biomass tissues and high N and P in grain panicles.

09 BIOMASS FUELS↗
DOE OSTI2021

The Influence of Bacteria on the Growth, Lipid Production, and Extracellular Metabolite Accumulation by Phaeodactylum tricornutum (Bacillariophyceae)

Here, to examine the impact of heterotrophic bacteria on microalgal physiology, we co-cultured the diatom Phaeodactylum tricornutum with six bacterial strains to quantify bacteria-mediated differences in algal biomass, total intracellular lipids, and for a subset, extracellular metabolite accumulation. A Marinobacter isolate significantly increased algal cell concentrations, dry biomass, and lipid content compared to axenic algal cultures. Two other bacterial strains from the Bacteroidetes order, of the genera Algoriphagus and Muricauda, significantly lowered P. tricornutum biomass, leading to overall decreased lipid accumulation. These three bacterial co-cultures (one mutualistic, two competitive) were analyzed for extracellular metabolites via untargeted liquid chromatography mass spectrometry to compare against bacteria-free cultures. Over 80% of the extracellular metabolites differentially abundant in at least one treatment were in higher concentrations in the axenic cultures, in agreement with the hypothesis that the co-cultured bacteria incorporated algal-derived organic compounds for growth. Furthermore, the extracellular metabolite profiles of the two growth-inhibiting cultures were more similar to one another than the growth-promoting co-culture, linking metabolite patterns to ecological role. Our results show that algal–bacterial interactions can influence the accumulation of intracellular lipids and extracellular metabolites, and suggest that utilization and accumulation of compounds outside the cell play a role in regulating microbial interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Data and scripts associated with a manuscript modeling microbial regulation of priming effects

This data package is associated with the publication “Modeling Microbial Regulatory Feedback in Organic Matter Decomposition Identifies Copiotrophic Traits as Key Drivers of Positive Priming” published as a preprint on BioRXiv by Ahamed et al. (2026); https://doi.org/10.1101/2024.08.11.607483. The package contains MATLAB scripts and saved simulation outputs used to implement a cybernetic model of microbial regulation during complex organic matter (OM) decomposition governing priming effects. It includes models of (i) single microbial functional groups (copiotrophic or oligotrophic degraders) and (ii) binary consortia composed of degraders and non-degraders with contrasting or common growth traits. Simulation results were generated using Monte Carlo analyses, with randomized key model parameters across a range of environmental mixing fractions of complex and labile OM. The dataset was created to provide a transparent and reusable computational framework for systematically exploring how microbial growth traits, metabolic regulation, and community composition influence OM decomposition dynamics and priming effects. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes the variable definitions. This package includes: (1) annotated MATLAB code implementing the system of ordinary differential equations and cybernetic control laws; (2) saved output files containing data (e.g., biomass, substrates, enzyme levels, priming metrics); and (3) scripts for processing saved outputs and regenerating figures. Specifically, the data package contains three main MATLAB scripts: runPrimingModel.m, runPlotData.m, and runPlotSuppFigS1.m, along with this readme and supporting documentation. Users should begin with runPrimingModel.m, which contains the annotated code implementing the system of ordinary differential equations and cybernetic control laws. This script runs the Monte Carlo simulations of microbial OM decomposition and allows users to modify microbial trait definitions, adjust parameter distributions, or define new community configurations. Simulation outputs are automatically saved as .mat files in the folder named SavedData, which stores all pre-generated results included in this package. The second script, runPlotData.m, reads files from the SavedData folder and processes them to regenerate the figures presented in the manuscript. The third script, runPlotSuppFigS1.m, specifically generates Figure S1 in the Supplementary Material of the manuscript. The package also includes the aforementioned files in non-proprietary .txt format. If users intend to use them, they should first save the files in their respective .m or .mat formats prior to execution in MATLAB.

Biomass concentration↗
DOE OSTI2024

Development and Validation of a Process Model and Open-Source Process Simulator for Microalgae-Based Tertiary Phosphorus Recovery

Microalgae-based tertiary wastewater treatment has the potential to meet stringent effluent phosphorus limits, with the added benefit of producing a marketable feedstock. However, the lack of validated mechanistic models and their implementation in process simulators have limited the adoption of this technology. In this study, an updated lumped pathway metabolic model (Phototrophic-Mixotrophic Process Model, PM 2 ), including both photoautotrophic and heterotrophic metabolisms of microalgae, was developed to predict effluent phosphorus concentration and biomass yield in response to dynamic influent and varying environmental conditions. The model was implemented in QSDsan – an open-source, Python-based design and simulation platform – for robust simulation under uncertainty. A global sensitivity analysis was performed to prioritize model parameters for calibration. The model was then calibrated and validated using batch experimental data and 45 days of continuous online monitoring data from a full-scale (568 m 3 ·d -1 ) microalgae-based tertiary wastewater treatment plant (EcoRecover process). In particular, along with dynamic influent composition, temperature and light intensity data with diel variation were provided as model inputs to reflect the microalgal behavior under day-night cycling. Overall, the QSDsan-based microalgae process simulator was able to predict effluent phosphorus within 0.02–0.04 mg-P·L -1 , while also capturing the general trends of state variables according to nutrient availability.

Lumped pathway metabolic model↗
DOE OSTI2025

Unraveling the depth-dependent causal dynamics of methanogenesis and methanotrophy in a high-latitude fen peatland

The dynamics of methane (CH 4 ) cycling in high-latitude peatlands through different pathways of methanogenesis and methanotrophy are still poorly understood due to the spatiotemporal complexity of microbial activities and biogeochemical processes. Additionally, long-term in situ measurements within soil columns are limited and associated with large uncertainties in microbial substrates (e.g. dissolved organic carbon, acetate, hydrogen). To better understand CH 4 cycling dynamics, we first applied an advanced biogeochemical model, ecosys , to explicitly simulate methanogenesis, methanotrophy, and CH 4 transport in a high-latitude fen (within the Stordalen Mire, northern Sweden). Next, to explore the vertical heterogeneity in CH 4 cycling, we applied the PCMCI/PCMCI+ causal detection framework with a bootstrap aggregation method to the modeling results, characterizing causal relationships among regulating factors (e.g. temperature, microbial biomass, soil substrate concentrations) through acetoclastic methanogenesis, hydrogenotrophic methanogenesis, and methanotrophy, across three depth intervals (0–10 cm, 10–20 cm, 20–30 cm). Our results indicate that temperature, microbial biomass, and methanogenesis and methanotrophy substrates exhibit significant vertical variations within the soil column. Soil temperature demonstrates strong causal relationships with both biomass and substrate concentrations at the shallower depth (0–10 cm), while these causal relationships decrease significantly at the deeper depth within the two methanogenesis pathways. In contrast, soil substrate concentrations show significantly greater causal relationships with depth, suggesting the substantial influence of substrates on CH 4 cycling. CH 4 production is found to peak in August, while CH 4 oxidation peaks predominantly in October, showing a lag response between production and oxidation. Overall, this research provides important insights into the causal mechanisms modulating CH 4 cycling across different depths, which will improve carbon cycling predictions, and guide the future field measurement strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Responses of Drying-rewetting (Transient Soil Moisture) and Steady State Soil Moisture Incubation on Soil Organic Carbon Dynamics in Three US Soils, 2017

This data set contains measurements of soil characteristics (aggregate size distribution and mean size, total aggregate associated carbon, extractable organic C, and microbial biomass C), microbial respiration, and soil metabolite concentrations from a transient and steady soil moisture incubation experiment using soils of different textures (sandy, loamy, and clayey). The study investigated mechanisms driving the Birch effect (increased carbon mineralization pulses with wetting following a drying period) in differing soil textures. Three different soils of distinctly different textures were collected from 0-15cm depth in Georgia (sandy, 2017-05-01), Missouri (loamy, 2017-06-14), and Texas (clayey, December 2017). Soils were incubated for 140 days with destructive harvests done on days 1, 29, 33, 56, 112, 116, and 140 in transient soil moisture incubation and on days 1, 33, 116, and 140 in steady state soil moisture incubation. This dataset contains six data files in comma separate (.csv) format. Additional metadata are provided: six data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

1-Methyladenosine concentration↗
DOE OSTI2026

BSEC Air Quality: Stationary Black and Brown Carbon Properties and Mass Concentration

Data is 1-min absorption/attenuation of aerosol collected on filter and sampled at seven wavelengths (950, 880, 660, 590, 520, 470, and 370 nm) with a Magee AE-33 dual spot aethalometer. The wavelength value for black carbon, as recommended by the manufacturer, is the 880 nm channel. The derived mass concentrations, using the factory default mass absorption cross-sections, are reported for all seven wavelengths. The absorption at all seven wavelengths are reported by dividing the derived mass concentrations by the factory default mass absorption cross-sections. The estimated mass concentration contribution from biomass burning and fossil fuel black carbon, using factory default values, are reported. The estimated brown carbon mass concentration is derived by finding the difference between the recommended black carbon wavelength (880 nm) and the ultra violet wavelength (370 nm), assuming that brown carbon absorption is strongest at 370 nm and minimal at 880 nm. Finally, the estimated absorption Angstrom exponent for black and brown carbon is derived. For black carbon, the slope between each minute log(AbsXXX), where XXX is the wavelength used versus log(XXX) is used, and the wavelengths are 590, 660, 880, and 950 nm. For brown carbon, the slope between each minute log(AbsXXX), where XXX is the wavelength used versus log(XXX) is used, and the wavelengths are 370, 470, and 520 nm.

aerosol↗
DOE OSTI2022

Sulfur Geochemistry Destabilizes Population Oscillations of Wild Rice ( Zizania palustris )

Abstract Elevated inputs of sulfate to freshwater systems can increase sulfide concentrations in anoxic soils and subsequently destabilize aquatic plant populations, but the interactions between sulfate, other geochemical cycles, and interannual plant population cycles are poorly understood. Increased sulfate loading increases mineralization of nitrogen from litter, but the sulfide produced during this process can limit nitrogen uptake by plants. In some cases, iron may mitigate sulfide's impacts on plants by precipitating iron sulfide. We examined the interannual effects of sulfate loading on mesocosm populations of wild rice, an emergent aquatic plant that undergoes population oscillations and is sensitive to sulfide. Using experimental mesocosms with self‐perpetuating populations, we investigated how population dynamics respond to manipulations of surface water sulfate (10 mg L −1 or 300 mg L −1 ), sediment iron (4.3 mg g −1 or 10.9 mg g −1 dry weight), and shoot litter (present or removed). Populations exposed to constant 10 mg L −1 sulfate concentrations had stable biomass oscillations of approximately 3‐year periods, consistent with previous studies that demonstrated litter‐driven oscillations in nitrogen availability. Populations exposed to 300 mg L −1 sulfate concentrations produced fewer and smaller seeds and declined to extinction in 6 years or less. We did not find a strong effect of iron loading or litter removal on wild rice biomass or seed production. Our observations show the potential of elevated surface water sulfate to rapidly destabilize wild rice populations under varying iron and organic carbon concentrations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Enhancing organic matter removal, product recovery, and hydrogen generation from fermentation wastewater

Existing ethanol biorefineries produce billions of gallons of wastewater (stillage) that must be treated extensively prior to discharge or concentrated in an energy intense evaporation step to produce animal feed as a value-added bioproduct. Yeasts and filamentous fungi were screened for growth and reduction of soluble organic compounds, carbohydrates, and protein from stillage to identify species capable of rapidly concentrating organic compounds into readily separable biomass in an attempt to concentrate the product using a much more efficient centrifugation step. Yeasts amenable to production of biomass derived products including bio-oils (Yarrowia lipolytica and Rhodotorula pallida), chitosan (Aspergillus niger) and animal feed (Cyberlindnera jadinii) were identified as well as microbes capable of efficient production of small organic acids with applications as bioderived polymers including 3-hydroxypropionic acid (engineered A. niger) and lactic acid using a co-culture of Debaryomyces udenii and Lactobacillus pentosus. The filamentous fungus A. niger eliminated all specifically measured soluble organics (glycerol, acetate, lactate, ethanol, and citrate) in under 48 hours and reduced total soluble protein content by 46% and total carbohydrate content by 83% within 96 hours, the greatest reduction in organic content observed. During this process an A. niger strain engineered to produce 3-hydroxypropionic acid achieved a yield of 0.35 C-mol 3HP / C-mol non-protein organics consumed at an overall rate of 0.09 g/Lh in unmodified stillage without pH control. Stillage treated by the fodder yeast C. jadinii as well as stillage containing acetic or lactic acid was found to be most suitable for growth by electrogenic bacteria with applications in production of electricity or hydrogen from wastewater. This work establishes fungal and bacterial strains appropriate for biological treatment of stillage to produce biomass derived products, soluble commodity chemicals, energy, and treated water to reduce the energy intensity and improve the economics of ethanol biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2025

Understanding the impacts of inorganic species in woody biomass for preprocessing and pyrolysis–A review

Woody biomass represents an abundant resource for sustainable biofuels, biochemicals, and bioproducts. Technologies for converting woody biomass have been established for decades, and research consistently highlights the critical role of inorganic species and ash plays in feedstock handling and conversion processes, including equipment plugging, corrosion, and catalyst deactivation. A thorough understanding of the variability, transport behavior, and downstream impact of inorganic species in woody biomass is essential for defining feedstock quality specifications and developing effective management strategies for conversion processes. This review compiles critical information in five main sections: 1) inorganic species concentration in woody biomass, based on anatomical fractions and their sources of variability; 2) technique features for quantifying inorganic elemental chemical analysis; 3) impacts of inorganic species on biomass preprocessing; 4) impacts of inorganic species on pyrolysis, and 5) mitigation strategies. Additionally, this review explores future challenges and opportunities in addressing the impacts of inorganic species on biomass quality. These insights aim to support the sustainable development of the biomass-to-bioenergy pipeline and ensure high-quality lignocellulosic feedstocks for efficient downstream conversions. The findings offer valuable guidance to policy makers, industry stakeholders, and researchers in developing effective strategies for managing inorganic species in woody biomass and fostering the sustainable processes for lignocellulosic biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2022

Aerosol size distribution changes in FIREX-AQ biomass burning plumes: the impact of plume concentration on coagulation and OA condensation/evaporation

Abstract. The evolution of organic aerosol (OA) and aerosol size distributions within smoke plumes is uncertain due to the variability in rates of coagulation and OA condensation/evaporation between different smoke plumes and at different locations within a single plume. We use aircraft data from the FIREX-AQ campaign to evaluate differences in evolving aerosol size distributions, OA, and oxygen to carbon ratios (O:C) between and within smoke plumes during the first several hours of aging as a function of smoke concentration. The observations show that the median particle diameter increases faster in smoke of a higher initial OA concentration (>1000 µg m−3), with diameter growth of over 100 nm in 8 h – despite generally having a net decrease in OA enhancement ratios – than smoke of a lower initial OA concentration (<100 µg m−3), which had net increases in OA. Observations of OA and O:C suggest that evaporation and/or secondary OA formation was greater in less concentrated smoke prior to the first measurement (5–57 min after emission). We simulate the size changes due to coagulation and dilution and adjust for OA condensation/evaporation based on the observed changes in OA. We found that coagulation explains the majority of the diameter growth, with OA evaporation/condensation having a relatively minor impact. We found that mixing between the core and edges of the plume generally occurred on timescales of hours, slow enough to maintain differences in aging between core and edge but too fast to ignore the role of mixing for most of our cases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Fine Root and Soil Organic Carbon Depth Distributions are Inversely Related Across Fertility and Rainfall Gradients in Lowland Tropical Forests

Humid tropical forests contain some of the largest soil organic carbon (SOC) stocks on Earth. Much of this SOC is in subsoil, yet variation in the distribution of SOC through the soil profile remains poorly characterized across tropical forests. We used a correlative approach to quantify relationships among depth distributions of SOC, fine root biomass, nutrients and texture to 1 m depths across 43 lowland tropical forests in Panama. The sites span rainfall and soil fertility gradients, and these are largely uncorrelated for these sites. We used fitted b parameters to characterize depth distributions, where b is a numerical index based on an asymptotic relationship, such that larger b values indicate greater concentrations of root biomass or SOC at depth in the profile. Root b values ranged from 0.82 to 0.95 and were best predicted by soil pH and extractable potassium (K) stocks. For example, the three most acidic (pH < 4) and Kpoor (< 20 g K m -2 ) soils contained 76 ± 5% of fine root biomass from 0 to 10 cm depth, while the three least acidic (pH > 6.0) and most K-rich (> 50 g K m -2 ) soils contained only 41 ± 9% of fine root biomass at this depth. Root b and SOC b values were inversely related, such that a large fine root biomass in surface soils corresponded to large SOC stocks in subsoils (50–100 cm). SOC b values were best predicted by soil pH and base cation stocks, with the three most base-poor soils containing 34 ± 8% of SOC from 50 to 100 cm depth, and the three most base-rich soils containing just 9 ± 2% of SOC at this depth. Nutrient depth distributions were not related to Root b or SOC b values. Here, these data show that large surface root biomass stocks are associated with large subsoil C stocks in strongly weathered tropical soils. Further studies are required to evaluate why this occurs, and whether changes in surface root biomass, as may occur with global change, could in turn influence SOC storage in tropical forest subsoils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Comparative performance and technoeconomic analyses of two microalgae harvesting systems evaluated at a commercially relevant scale

Using a commercially scalable system designed for processing thousands of liters a day, here we evaluated the factors that affected the performance, energy consumption and capital/operating costs of both flocculation-based and filtration-based algal harvesting systems over a 16 month period. Coagulation efficiency was the primary driver of harvest efficiency in the flocculation-based method, while cell lysis was important for the filtration-based method. Culture (algae) age differentially influenced harvest efficiency through changes in cell fragility and stickiness. The average energy consumption of the flocculation-based method was 0.389 kWh/m 3 , while that for the filtration-based method was 4.343 kWh/m 3 . The average harvesting cost of the filtration-based method was 5.35 $\$$/m 3 , while for flocculation-based method it was 4.52 $\$$/m 3 . The concentration factor of filtration-based and flocculation-based method were 770–1086 and 407–448, respectively. For both harvesting methods, labor costs dominated and ranged from 55.84%–67.94% of total cost. Further system automation is a potential method to lower the harvesting cost. The filtration-based harvesting method could produce a better quality of algal biomass with higher concentration factors and less ash content, but needed more energy input, as compared with a flocculation-based method. This study highlights the importance of algal culture status to successful harvesting, and it also provides insight into developing more efficient harvesting technology with lower energy and capital cost.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Predictability of Seawater DMS During the North Atlantic Aerosol and Marine Ecosystem Study (NAAMES)

This work presents an overview of a unique set of surface ocean dimethylsulfide (DMS) measurements from four shipboard field campaigns conducted during the North Atlantic Aerosol and Marine Ecosystem Study (NAAMES) project. Variations in surface seawater DMS are discussed in relation to biological and physical observations. Results are considered at a range of timescales (seasons to days) and spatial scales (regional to sub-mesoscale). Elevated DMS concentrations are generally associated with greater biological productivity, although chlorophyll a (Chl) only explains a small fraction of the DMS variability (15%). Physical factors that determine the location of oceanic temperature fronts and depth of vertical mixing have an important influence on seawater DMS concentrations during all seasons. The interplay of biomass and physics influences DMS concentrations at regional/seasonal scales and at smaller spatial and shorter temporal scales. Seawater DMS measurements are compared with the global seawater DMS climatology and predictions made using a recently published algorithm and by a neural network model. The climatology is successful at capturing the seasonal progression in average seawater DMS, but does not reproduce the shorter spatial/temporal scale variability. The input terms common to the algorithm and neural network approaches are biological (Chl) and physical (mixed layer depth, photosynthetically active radiation, seawater temperature). Both models predict the seasonal North Atlantic average seawater DMS trends better than the climatology. However, DMS concentrations tend to be under-predicted and the episodic occurrence of higher DMS concentrations is poorly predicted. The choice of climatological seawater DMS product makes a substantial impact on the estimated DMS flux into the North Atlantic atmosphere. These results suggest that additional input terms are needed to improve the predictive capability of current state-of-the-art approaches to estimating seawater DMS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Bioproducts from high-protein algal biomass: An economic and environmental sustainability review and risk analysis

This report has High-protein algal biomass as an important bio-commodity that has the potential to provide a new source of sustainable protein products. Herein is a critical review that identifies 1) the most relevant sustainability findings related to the processing of proteinaceous algal biomass to higher value protein products and 2) the potential pathways to improve life cycle assessment (LCA) and techno-economic analysis (TEA) metrics, including life-cycle carbon dioxide equivalent (CO 2 eq), life cycle energy, and minimum selling price (MSP) of these products. The critical review of the literature revealed a large variation in model input parameters relating to these metrics. Therefore, a Monte Carlo analysis was conducted to assess the risk associated with these input variations. To understand the uncertainties that propagate into high-protein algae to products’ systems, we reviewed more than 20 state-of-the-art unit operations for algal biomass processing., including cell disruption, protein solubilization, protein precipitation and purification, and protein concentration. We evaluated displacement of proteinaceous products by algal-bioproducts, including ruminant feed, aquaculture feed, protein tablets, and biopolymers and biopolyesters, with prices in the market ranging from 1.9 to 120 $\$$ kg -1 protein. This review realized that the MSP of ruminant and non-ruminant feed ranges from 0.65±0.56 to 2.9±1.1 $\$$ kg -1 protein, and bioplastics’ MSP ranges from 0.97 to 7.0 $\$$ kg -1 protein. Regarding LCA metrics, there is limited research on life cycle energy in proteinaceous biomass concentration and bioproduct systems, reported at 32.7 MJ kg protein -1 , for animal feed displacement. Animal feed emissions in the literature report negative fluxes, representing environmental benefits, as low as -3.7 kgCO 2 eq kg -1 protein and positive fluxes, i.e., global warming potential, as high as 12.8 kgCO 2 eq kg -1 protein. There is limited research on bioplastics life cycle emissions reported at 0.6 kgCO 2 eq kg -1 protein. In general, the studies to date of algae-derived protein bioproducts showed similar life cycle emissions to soybean meals, nylon, polymers, and polystyrenes. Our risk analysis realized that more than 50% of scenarios can result in negative-net life cycle CO 2 eq emissions. This review and risk analysis assess and demonstrate the scenarios that improve economic and environmental sustainability metrics in high-protein algal bioproducts systems.

09 BIOMASS FUELS↗
DOE OSTI2025

Data for Identifying the best high-biomass sorghum hybrids based on biomass yield potential and feedstock quality affected by nitrogen fertility management under various environments

Data were collected from agronomy fields in Urbana and Ewing, IL, during the 2022 and 2023 growing seasons. The dataset includes dry biomass yield, nitrogen, phosphorus, and potassium concentrations and removals, and chemical composition elements (cellulose, hemicellulose, lignin, and soluble fractions) for 13 high-biomass sorghum hybrids. data_sharing.xlsx contains 20 columns and 104 rows. Below is the explanation of all variables in the file: Year: 2022; 2023 Location: Urbana, IL; Ewing, IL N rate (kg-N/ha): 0; 112 Hybrid #: H1-H13 Pedigree: Pedigree for 13 hybrids Dry biomass yield (Mg/ha): Aboveground dry biomass yield N (g/kg): Nitrogen concentration in plant tissue P (g/kg): Phosphorus concentration in plant tissue K (g/kg): Potassium concentration in plant tissue N (kg/ha): Nitrogen removal by aboveground biomass P (kg/ha): Phosphorus removal by aboveground biomass K (kg/ha): Potassium removal by aboveground biomass Cellulose (g/kg): Cellulose concentration in plant tissue Hemicellulose (g/kg): Hemicellulose concentration in plant tissue Lignin (g/kg): Lignin concentration in plant tissue Soluble (g/kg): Soluble concentration in plant tissue Cellulose (Mg/ha): Cellulose content in aboveground biomass Hemicellulose (Mg/ha): Hemicellulose content in aboveground biomass Lignin (Mg/ha): Lignin content in aboveground biomass Soluble (Mg/ha): Soluble content in aboveground biomass

environmental adaptability↗
DOE OSTI2021

Chitin extracted from various biomass sources: It's not the same

Here this study demonstrates the use of ionic liquids to successfully extract chitin from different biomass sources and the utilization of the resulting chitins to prepare monofilament fibers. Chitin was extracted from five different biomass sources (processed and raw shrimp shell, crab and lobster shell, and fly larvae) using the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]). While processed and raw shrimp shell yielded chitin of high purity in quantitative yield, crab and lobster shell resulted in lower yields of chitin. Fly larva provided chitin severely contaminated with proteins. Each extracted chitin was re-dissolved in the same IL and dry wet jet spun into monofilament fibers to determine any trends in mechanical properties vs. biomass source. The concentration needed to spin fibers was not consistent and had to be adjusted individually for each type of chitin obtained. Chitin from raw shrimp shell produced the strongest fibers, while the chitin from the crab and lobster produced weaker fibers, although, the latter were twice as elastic. The use of fly larvae led to the weakest and least elastic fibers.

60 APPLIED LIFE SCIENCES↗