Results for “Blueprint” — Page 2

NASA NTRSDate not supplied

Software for Optical (Laser) Ground Station Monitor and Control

Previous NASA laser communication missions have been supported by ground terminals specific to the mission. The Low-Cost Optical Terminal project (LCOT) aims to serve as a commercial off-the-shelf (COTS), reusable, and modular optical ground terminal prototype, provide a blueprint for future optical ground terminals, and enable optical communication experiments with a variety of spacecraft from Low Earth Orbit to lunar orbit. The goal of the internship was the development of LCOT’s Gimbal Monitor and Control (GMC) application, within the LCOT Monitor and Control Subsystem (MCS). Mount control software PWI4 was provided by mount and gimbal vendor Planewave Instruments; developed in Python, GMC integrates and interfaces with PWI4 using third party libraries such as Protobuf and RabbitMQ. As a stand in for the Monitor and Control Subsystem (MCS), a test Graphical User Interface (GUI) was created to send commands to and receive telemetry from the GMC application; these commands and telemetry are sent through the RabbitMQ message bus as Protobuf encoded messages. GMC then interfaces with PWI4 which passes along desired commands and telemetry to and from a vendor provided mount and gimbal simulator. The GMC software developed allows LCOT’s Monitor and Control Subsystem (MCS) to take advantage of the existing mount control software, advancing LCOT’s efforts in the development of the MCS. The MCS and GMC software developed will contribute to LCOT’s goal as a flexible and modular optical ground terminal prototype and blueprint, which supports development towards a potential optical ground terminal network.

space communications↗

NASA NTRSDate not supplied

Characterization of in-Space Propulsion Trade Space to Support Initial Human Mars Segment

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon to Mars blueprint objectives. The focus of the Architecture Development Office has been to decompose the blueprint objectives into the characteristics and needs for both lunar and Mars missions and develop functional needs to enable an integrated end-to-end mission architecture. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and return crew safely back to Earth. The Mars Architecture Team has been evaluating four in-space transportation options to satisfy this functional need: 1) Hybrid Nuclear Electric/ Chemical Propulsion, 2) Nuclear Thermal Propulsion, 3) Hybrid Solar Electric/ Chemical Propulsion, and 4) All-Chemical propulsion. To answer the question “which transportation option is best?” decision makers will need to understand the performance characteristics—and limitations—for each architecture in the context of their preferred metric. Each option could be considered “better” than the others, depending on whether the primary selection criteria is fast, cheap, maximum cross-government applicability, maximizes commercial capabilities, and/or any other desired metrics. The Mars Architecture Team has completed considerable analysis on the Hybrid Nuclear Electric/Chemical Propulsion concept over the past three years. The Space Nuclear Propulsion program has also conducted significant work on the Nuclear Thermal Propulsion concept. The Hybrid Solar Electric/Chemical Propulsion concept, derived from technology planned for the Gateway program, was originally configurated for minimum vehicle stack mass (and, hence, minimum Earth-launched mass/cost), leveraging a highly efficient propulsion system on a minimum energy Conjunction Class trajectory. Historically, All-Chemical concepts were considered impractical due to the enormous propellant mass required, even for minimum energy Conjunction Class/long stay mission opportunities. However, considering the emerging commercial heavy-lift capabilities, the concept must be reevaluated across a range of concepts that leverage reusable launch vehicle capabilities to reduce the cost of launching large quantities of transportation elements needed for missions of various duration. This paper aims to provide an overview of the in-space transportation assessment work that is on-going within NASA.

Mars↗

NASA NTRSDate not supplied

Characterization of in-Space Propulsion Trade Space to Support Initial Human Mars Segment

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon to Mars blueprint objectives. The focus of the Architecture Development Office has been to decompose the blueprint objectives into the characteristics and needs for both lunar and Mars missions and develop functional needs to enable an integrated end-to-end mission architecture. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and return crew safely back to Earth. The Mars Architecture Team has been evaluating four in-space transportation options to satisfy this functional need: 1) Hybrid Nuclear Electric/ Chemical Propulsion, 2) Nuclear Thermal Propulsion, 3) Hybrid Solar Electric/ Chemical Propulsion, and 4) All-Chemical propulsion. To answer the question “which transportation option is best?” decision makers will need to understand the performance characteristics—and limitations—for each architecture in the context of their preferred metric. Each option could be considered “better” than the others, depending on whether the primary selection criteria is fast, cheap, maximum cross-government applicability, maximizes commercial capabilities, and/or any other desired metrics. The Mars Architecture Team has completed considerable analysis on the Hybrid Nuclear Electric/Chemical Propulsion concept over the past three years. The Space Nuclear Propulsion program has also conducted significant work on the Nuclear Thermal Propulsion concept. The Hybrid Solar Electric/Chemical Propulsion concept, derived from technology planned for the Gateway program, was originally configurated for minimum vehicle stack mass (and, hence, minimum Earth-launched mass/cost), leveraging a highly efficient propulsion system on a minimum energy Conjunction Class trajectory. Historically, All-Chemical concepts were considered impractical due to the enormous propellant mass required, even for minimum energy Conjunction Class/long stay mission opportunities. However, considering the emerging commercial heavy-lift capabilities, the concept must be reevaluated across a range of concepts that leverage reusable launch vehicle capabilities to reduce the cost of launching large quantities of transportation elements needed for missions of various duration. This paper aims to provide an overview of the in-space transportation assessment work that is on-going within NASA.

Mars↗

NASA NTRSDate not supplied

A Comparative Assessment of Evolvable Martian ISRU Propellant Production for Future Human Missions

In 2022, NASA released its “Moon to Mars Strategy and Objectives Development” document, containing top-level goals and objectives designed to create a blueprint for sustained human presence and exploration throughout the solar system. One objective in this “blueprint” calls for the demonstration of “…Mars ISRU capabilities to support an initial human Mars exploration campaign.” NASA is looking at both the benefits and liens of this concept, as one of several trade space aspects under consideration, for inclusion in the overall architecture of the human exploration of Mars. This paper summarizes results from a series of Martian ISRU-focused trade studies from 2023 and 2024. These studies cover five different approaches to providing propellants for returning crew and equipment from the surface of Mars, using several different combinations of propellants delivered (from Earth) and produced from Martian feedstock material. For comparison purposes, the same ISRU infrastructure elements were used across all options wherever possible. The equipment mass, power, operational complexity, and time needed to produce some or all of these propellants have been quantified and compared when used in a common mission scenario. Analysis results for each option are discussed. Performance parameters for these options are compared side-by-side and observations made, including the positive and negative aspects of each case. The possibility of evolving from a simpler ISRU case to more complex cases that would potentially lead to more sustainable operations are also discussed. While no single case emerged as “better” in all aspects when compared to the others, there are distinct advantages and disadvantages that did emerge when comparing the results generated from a common set of assumptions for all cases. Consequently, specific mission objectives may determine which of these advantages or disadvantages are important for choosing among the cases that could benefit any particular mission or campaign.

Mars↗

NASA NTRSDate not supplied

A Comparative Assessment of Evolvable Martian ISRU Propellant Production for Future Human Missions

In 2022, NASA released its “Moon to Mars Strategy and Objectives Development” document, containing top-level goals and objectives designed to create a blueprint for sustained human presence and exploration throughout the solar system. One objective in this “blueprint” calls for the demonstration of “…Mars ISRU capabilities to support an initial human Mars exploration campaign.” NASA is looking at both the benefits and liens of this concept, as one of several trade space aspects under consideration, for inclusion in the overall architecture of the human exploration of Mars. This paper summarizes results from a series of Martian ISRU-focused trade studies from 2023 and 2024. These studies cover five different approaches to providing propellants for returning crew and equipment from the surface of Mars, using several different combinations of propellants delivered (from Earth) and produced from Martian feedstock material. For comparison purposes, the same ISRU infrastructure elements were used across all options wherever possible. The equipment mass, power, operational complexity, and time needed to produce some or all of these propellants have been quantified and compared when used in a common mission scenario. Analysis results for each option are discussed. Performance parameters for these options are compared side-by-side and observations made, including the positive and negative aspects of each case. The possibility of evolving from a simpler ISRU case to more complex cases that would potentially lead to more sustainable operations are also discussed. While no single case emerged as “better” in all aspects when compared to the others, there are distinct advantages and disadvantages that did emerge when comparing the results generated from a common set of assumptions for all cases. Consequently, specific mission objectives may determine which of these advantages or disadvantages are important for choosing among the cases that could benefit any particular mission or campaign.

Propellant↗

NASA NTRS1972

Potential targets in the search for extraterrestrial life.

Discussion of the potential for increasing understanding of the origins of terrestrial life by examination of other planets. If living organisms should be found on another planet, they could only have been transported from an inhabited planet or originated independently. The fundamental chemical and structural attributes of terrestrial organisms are so remarkably uniform that any living forms outside the terrestrial blueprint would almost certainly be regarded as alien organisms. It has been shown experimentally by various investigators that life can exist in an extremely wide range of temperatures and pressures. The presence of an atmosphere appears to be necessary.

Klein, H. P.↗

NASA NTRS1973

Planning alternative organizational frameworks for a large scale educational telecommunications system served by fixed/broadcast satellites

This memorandum explores a host of considerations meriting attention from those who are concerned with designing organizational structures for development and control of a large scale educational telecommunications system using satellites. Part of a broader investigation at Washington University into the potential uses of fixed/broadcast satellites in U.S. education, this study lays ground work for a later effort to spell out a small number of hypothetical organizational blueprints for such a system and for assessment of potential short and long term impacts. The memorandum consists of two main parts. Part A deals with subjects of system-wide concern, while Part B deals with matters related to specific system components.

Walkmeyer, J.↗

NASA NTRS1974

Photometer dewar system for NASA C141 airborne telescope (Kuiper Flying Observatory)

The design, calibration, and testing of a photometer to be used in an airborne telescope is described. A description of the cryogenics of the photometer is given, and photographs and blueprints of the photometer are included. The photometer is designed with a focal plane beam switching system so that the airplane telescope can be used in a normal optical mode at the bent Cassegrain focus and with the photometer operating in the pressurized cabin of the airplane. The concept was to produce a system which could be used in almost the same manner as ground based infrared photometers and dewars of the O'Brien Observatory at the University of Minnesota.

Ney, E. P.↗

NASA NTRS1975

ECASTAR systems approach

The methodology of ECASTAR was presented and a discussion of the application of technology to energy conservation was given. This methodology constitutes an overview and blueprint for the analysis of energy conservation actions, and is subdivided into the following sections: the systems approach, constraints and criteria, application of the method (systems approach display, ECASTAR team, study phases and objectives, requirements and impacts, trade-off, integration, and feedback), an example of the method (technology applications).

Source record↗

NASA NTRS1976

Design study of the accessible focal plane telescope for shuttle

The design and cost analysis of an accessible focal plane telescope for Spacelab is presented in blueprints, tables, and graphs. Topics covered include the telescope tube, the telescope mounting, the airlock plus Spacelab module aft plate, the instrument adapter, and the instrument package. The system allows access to the image plane with instrumentation that can be operated by a scientist in a shirt sleeve environment inside a Spacelab module.

Source record↗

NASA NTRS1982

Seattle's System for Evaluating Energy Options

In 1975, the City Council developed a blueprint called "Energy 1990" for meeting Seattle's future electric energy needs. Priorities for addressing or offsetting expected growth in demand are in order: (1) conservation; (2) hydroelectricity; (3) other renewable sources such as wind, biomass, solar, and geothermal energy; (4) abundant nonrenewable resources such as coal, and (5) other renewables. An energy resources planning group was formed and a data base was established. Resource options were investigated and the recommendations were published.

Logie, P.↗

NASA NTRS1984

Global tropospheric chemistry: A plan for action

Prompted by an increasing awareness of the influence of human activity on the chemistry of the global troposphere, a panel was formed to (1) assess the requirement for a global study of the chemistry of the troposphere; (2) develop a scientific strategy for a comprehensive plan taking into account the existing and projected programs of the government; (3) assess the requirements of a global study in terms of theoretical knowledge, numerical modeling, instrumentation, observing platforms, ground-level observational techniques, and other related needs; and (4) outline the appropriate sequence and coordination required to achieve the most effective utilization of available resources. Part 1 presents a coordinated national blueprint for scientific investigations of biogeochemical cycles in the global troposphere. part 2 presents much of the background information of the present knowledge and gaps in the understanding of tropospheric chemical cycles and processes from which the proposed program was developed.

Source record↗

NASA NTRS1984

JESS facility modification and environmental/power plans

Preliminary plans for facility modifications and environmental/power systems for the JESS (Joint Exercise Support System) computer laboratory and Freedom Hall are presented. Blueprints are provided for each of the facilities and an estimate of the air conditioning requirements is given.

Bordeaux, T. A.↗

NASA NTRS1985

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

Dominick, Wayne D.↗

NASA NTRS1985

An overview of the evaluation plan for PC/MISI: PC-based Multiple Information System Interface

An initial evaluation plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intend to be used as a blueprint for the evaluation of this system. Each objective of the design project is discussed along with the evaluation parameters and methodology to be used in the evaluation of the implementation's achievement of those objectives. The potential of the system for research activities related to more general aspects of information retrieval is also discussed.

Dominick, Wayne D.↗

NASA NTRS1991

3-D CFD in a day - The laser digitizer project

The computation of airflow over complex configurations requires a complete description of the geometry. This can be obtained from CAD data, from blueprints, or from actual models. In any case, the time required is currently estimated at 4 to 6 months. It is proposed to shorten this time by a factor of 10 to 100 through the use of automated software, a fast, highly parallel computer and a three-dimensional laser digitizer. This device can provide (x,y,z) coordinates of surface points at rates exceeding 14,500/sec. Thus, it is possible to digitize an entire model in a few minutes. The accuracy of measurement on a flat white surface is better than 0.005 inches. Higher accuracy is available at higher cost. This work discusses the challenges which remain to be addressed. In particular, the surface point data need to be converted into a surface description, the surface description needs to be made into a surface grid, and the surface grid used to make a volume grid for the flow solver. Algorithms are kept in place or in mind for all of these problems. Integration of the more mature flow solution and visualization algorithms then allows generation of solution graphics directly from a wind tunnel model.

Merriam, Marshal↗

NASA NTRS1991

Detailed analysis and test correlation of a stiffened composite wing panel

Nonlinear finite element analysis techniques are evaluated by applying them to a realistic aircraft structural component. A wing panel from the V-22 tiltrotor aircraft is chosen because it is a typical modern aircraft structural component for which there is experimental data for comparison of results. From blueprints and drawings supplied by the Bell Helicopter Textron Corporation, a very detailed finite element model containing 2284 9-node Assumed Natural-Coordinate Strain (ANS) elements was generated. A novel solution strategy which accounts for geometric nonlinearity through the use of corotating element reference frames and nonlinear strain displacements relations is used to analyze this detailed model. Results from linear analyses using the same finite element model are presented in order to illustrate the advantages and costs of the nonlinear analysis as compared with the more traditional linear analysis. Strain predictions from both the linear and nonlinear stress analyses are shown to compare well with experimental data up through the Design Ultimate Load (DUL) of the panel. However, due to the extreme nonlinear response of the panel, the linear analysis was not accurate at loads above the DUL. The nonlinear analysis more accurately predicted the strain at high values of applied load, and even predicted complicated nonlinear response characteristics, such as load reversals, at the observed failure load of the test panel. In order to understand the failure mechanism of the panel, buckling and first ply failure analyses were performed. The buckling load was 17 percent above the observed failure load while first ply failure analyses indicated significant material damage at and below the observed failure load.

Davis, D. Dale, Jr.↗

NASA NTRS1992

Doing more with less - The new way of exploring the solar system

Exploration of the solar system is considered in the light of existing economic factors and scientific priorities, and a general blueprint for an exploration strategy is set forth. Attention is given to mission costs, typical schedules, and the scientific findings of typical projects which create the need for collaboration and diversification in mission development. The combined technologies and cooperative efforts of several small organizations can lead to missions with short schedules and low costs.

Ridenoure, Rex↗