Search NASA⌕ Search

SEARCH · Search NASA

Results for “Brownmillerite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Wide-range continuous tuning of the thermal conductivity of La0.5Sr0.5CoO3-δ films via room-temperature ion-gel gating

Abstract Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability to continuously tune the thermal conductivity of nanoscale films of La 0.5 Sr 0.5 CoO 3- δ (LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (with δ ≈ 0.1) to an oxygen-vacancy-ordered brownmillerite phase (with δ = 0.5), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport equation, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications.

42 ENGINEERING↗
DOE OSTI2025

Selective reduction in epitaxial SrFe 0.5 Co 0.5 O 2.5 and its reversibility

Oxygen-vacancy engineering in transition metal oxides enables programmable functionalities by modulating the valence states and local coordination of constituents. Here, we report the selective reduction of cobalt ions in epitaxial SrFe 0.5 Co 0.5 O 2.5 thin films under reducing gas environments, while iron ions remain unchanged. X-ray absorption spectroscopy reveals an absorption edge shift of 1.65 eV in the Co L-edge upon reduction, and multiplet simulations estimate a decrease in the average Co valence from Co 2.91+ to Co 2.00+ . This site- and element-specific reduction leads to the formation of a structurally distinct oxygen-deficient phase stabilized by oxygen vacancies at tetrahedral sites, as confirmed by density functional theory. Optical spectroscopy reveals an increase in the bandgap from 2.47 eV to 3.04 eV, accompanied by enhanced transparency. Furthermore, simultaneous in situ diffraction and transport measurements confirm fully reversible redox-driven transitions among three phases: reduced defective perovskite, brownmillerite, and oxygen-rich perovskite phases. These findings demonstrate that selective redox control in multi-cation oxides enables the realization of chemically and functionally distinct oxygen-deficient phases.

Fuel cells↗
DOE OSTI2020

Time- and strain-dependent nanoscale structural degradation in phase change epitaxial strontium ferrite films

Topotactic phase transition between metallic, perovskite SrFeO 3 and insulating, Brownmillerite SrFeO 2.5 has been extensively studied due to the potential applications in resistive switching devices for neuromorphic computing. However, its practical utilization as memristors has been hindered by the structural instability of SrFeO 3 , which is often ascribed to the generation of oxygen vacancies to form SrFeO 3-δ . Here we reveal the dominating defects generated in SrFeO 3 epitaxial thin films are atomic scale gaps as a result of interfacial strain. Our correlated time- and strain-dependent measurements show that tensile strained SrFeO 3 films form vertical, nanoscale gaps that are SrO-rich, which are accountable for the observed metal-to-insulator transition over time. While compressively strained or small lattice mismatched SrFeO 3 films mainly yield horizontal gaps with a smaller impact on the in-plane transport. The atomic scale origin of such defects and their impact on device performance need to be further understood in order to integrate phase change materials in oxide electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bi-directional tuning of thermal transport in SrCoO x with electrochemically induced phase transitions

Unlike the wide-ranging dynamic control of electrical conductivity, there does not exist an analogous ability to tune thermal conductivity by means of electric potential. The traditional picture assumes that atoms inserted into a material’s lattice act purely as a source of scattering for thermal carriers, which can only reduce thermal conductivity. In contrast, here we show that the electrochemical control of oxygen and proton concentration in an oxide provides a new ability to bi-directionally control thermal conductivity. On electrochemically oxygenating the brownmillerite SrCoO 2.5 to the perovskite SrCoO 3–δ , the thermal conductivity increases by a factor of 2.5, whereas protonating it to form hydrogenated SrCoO 2.5 effectively reduces the thermal conductivity by a factor of four. This bi-directional tuning of thermal conductivity across a nearly 10 ± 4-fold range at room temperature is achieved by using ionic liquid gating to trigger the ‘tri-state’ phase transitions in a single device. We elucidated the effects of these anionic and cationic species, and the resultant changes in lattice constants and lattice symmetry on thermal conductivity by combining chemical and structural information from X-ray absorption spectroscopy with thermoreflectance thermal conductivity measurements and ab initio calculations. This ability to control multiple ion types, multiple phase transitions and electronic conductivity that spans metallic through to insulating behaviour in oxides by electrical means provides a new framework for tuning thermal transport over a wide range.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Geometric frustration of Jahn–Teller order in the infinite-layer lattice

The Jahn–Teller effect, in which electronic configurations with energetically degenerate orbitals induce lattice distortions to lift this degeneracy, has a key role in many symmetry-lowering crystal deformations. Lattices of Jahn–Teller ions can induce a cooperative distortion, as exemplified by LaMnO 3 . Although many examples occur in octahedrally or tetrahedrally coordinated transition metal oxides due to their high orbital degeneracy, this effect has yet to be manifested for square-planar anion coordination, as found in infinite-layer copper, nickel, iron and manganese oxides. Here, for this work, we synthesize single-crystal CaCoO 2 thin films by topotactic reduction of the brownmillerite CaCoO 2.5 phase. We observe a markedly distorted infinite-layer structure, with ångström-scale displacements of the cations from their high-symmetry positions. This can be understood to originate from the Jahn–Teller degeneracy of the d xz and d yz orbitals in the d 7 electronic configuration along with substantial ligand–transition metal mixing. A complex pattern of distortions arises in a $2\sqrt2$ x $2\sqrt2$ x $1$ tetragonal supercell, reflecting the competition between an ordered Jahn–Teller effect on the CoO 2 sublattice and the geometric frustration of the associated displacements of the Ca sublattice, which are strongly coupled in the absence of apical oxygen. As a result of this competition, the CaCoO 2 structure forms an extended two-in–two-out type of Co distortion following ‘ice rules’.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Resistive Switching in SrFeO2.5/Nb:SrTiO3 Heterostructures with Growth-Controlled Film Orientation

Resistive switching, a behavior found in many oxide materials, has the potential to enable emerging computer hardware technologies and architectures. We present resistive switching devices fabricated from epitaxial brownmillerite SrFeO2.5 films with two distinct film orientations, wherein facile oxygen ion diffusion planes are aligned parallel (in-plane) and perpendicular (out-of-plane) with the electrodes. SrFeO2.5 films were grown on (001) oriented Nb:SrTiO3 to enable high-quality interfaces and future integration with Si CMOS technologies. Post-growth vacuum annealing and growth pressure were used to control film orientations, as confirmed by transmission electron microscopy and x-ray diffraction measurements. Films grown with diffusion planes oriented in-plane had oxygen-rich, perovskite-like nanodomains spread throughout the film, and fabricated devices exhibited worse switching consistency and more stochasticity. In contrast, films grown with diffusion planes oriented out-of-plane had a more uniform oxygen-rich perovskite interfacial layer above the bottom electrode, and devices built from this film orientation showed significant statistical improvements in switching voltages and cycling consistency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Phase Transition Dynamics in a Complex Oxide Heterostructure

Understanding the behavior of defects in the complex oxides is key to controlling myriad ionic and electronic properties in these multifunctional materials. The observation of defect dynamics, however, requires a unique probe-one sensitive to the configuration of defects as well as its time evolution. Here, we present measurements of oxygen vacancy ordering in epitaxial thin films of SrCoO x and the brownmillerite-perovskite phase transition employing x-ray photon correlation spectroscopy. These and associated synchrotron measurements and theory calculations reveal the close interaction between the kinetics and the dynamics of the phase transition, showing how spatial and temporal fluctuations of heterointerface evolve during the transformation process. The energetics of the transition are correlated with the behavior of oxygen vacancies, and the dimensionality of the transformation is shown to depend strongly on whether the phase is undergoing oxidation or reduction. Finally, the experimental and theoretical methods described here are broadly applicable to in situ measurements of dynamic phase behavior and demonstrate how coherence may be employed for novel studies of the complex oxides as enabled by the arrival of fourth-generation hard x-ray coherent light sources.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Generic Sacrificial Layer for Wide-Range Freestanding Oxides with Modulated Magnetic Anisotropy

Freestanding oxide nanomembranes have promising applications because of their novel electronic states and flexible crystalline structures. Several materials have been developed as sacrificial layers to exfoliate thin films from substrates via wet-etching. However, these materials face great challenges in terms of either complicated crystalline structures or corrosive solutions. Herein, a new sacrificial material, SrCoO 2.5 , is presented, which can be coherently grown with wide-range strains and crystalline orientations and is also soluble in eco-friendly solutions such as acetic acid, vinegar, and even carbonated drinks. With SrCoO 2.5 as the sacrificial layer, high-quality freestanding ferromagnetic SrRuO 3 membranes are achieved from wide-range epitaxial strains and different crystalline orientations. By investigating the evolution of the magnetic properties of these samples, it is discovered that epitaxial strain causes a distinct modification of the magnetic anisotropy of (001) pc -oriented SrRuO 3 samples, while its influence on the (110) pc and (111) pc samples is insignificant. This study not only demonstrates the freestanding SrRuO 3 as a promising material for flexible spintronic devices, but also offers a great opportunity to engineer a wide range of strained and oriented complex oxides for novel freestanding electronics using this newly developed sacrificial material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of strain on SrFeO 3-δ oxidation, reduction, and water dissociation: Insights from ambient pressure X-ray photoelectron spectroscopy

The oxidation and reduction of metal oxides and their interaction with the environment play a critical role in their use for energy storage and conversion applications. The formation of surface adsorbates and their impact on oxide electronic structure can be challenging to probe experimentally, particularly for thin films which enable the study of epitaxial strain but have low surface areas. Here we present a detailed study using ambient pressure X-ray photoelectron spectroscopy of the reduction and oxidation of strained SrFeO 3-δ , induced by changes in temperature, oxygen partial pressure, and water vapor exposure. We find that in comparison to the oxidized lattice, application of tensile strain promotes the formation of oxygen vacancies at the surface, facilitating the subsequent incorporation of oxygen into the lattice in an oxygen environment. While tensile strain does promote the formation of hydroxyls from water dissociation, the kinetics of this process appear more sluggish than on less-strained surfaces, likely due to a competitive surface interaction with oxygen or bulk absorption of hydroxyl species. These findings relating strain, oxygen vacancies, and surface reactivity yield important insight into the surface functionality of oxides for energy conversion and storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multisublattice cluster expansion study of short-range ordering in iron-substituted strontium titanate

Owing to the challenges in obtaining realistic atomic configurations in large chemical phase spaces, it is not straightforward to describe structure–property relations in materials exhibiting configurational disorder. One example is iron-substituted strontium titanate (SrTi 1–x Fe x O 3–d , STF), a promising perovskite-derivative cathode material in solid oxide fuel cells that exhibits full solid solubility 0 ≤ x ≤ 1 and a tendency to exhibit short-range order. Here we demonstrate a multisublattice cluster expansion (CE) framework and apply it to STF across the full composition range. The CE approach is distinct from more traditional CE formulations in that clusters are defined explicitly by the chemical species distributed among multiple sublattices, rather than via cluster functions of occupation variables with decoration. The modified CE approach makes it easy to distinguish meaningful chemical interactions that are harder to extract from conventional CE, since for the latter chemical identity in a cluster is expressed as a product of site occupations. The least absolute shrinkage and selection operator (LASSO) is implemented as a regression analysis tool to select key clusters and avoid overfitting. We demonstrate this formulation on STF, and show that it can accurately predict configurational energies in comparison to conventional CE. From the key clusters, we identify that short-range ordering between substitutional Fe and oxygen vacancies (V O ) results in the formation of Fe–VO strings. In addition, we consider the stability of STF through CE-based Monte Carlo (MC) simulations and confirm the presence of superstructures that were previously observed in transmission electron microscopy. In this work, analysis of atomic configurations from MC samples reveals variations in the oxidation state of Fe atoms, which can be explained by the ordering tendency of Fe and V O . The cluster description and selection formalism described here may be applied to other disordered multisublattice systems for accurate and efficient material modeling.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Guided anisotropic oxygen transport in vacancy ordered oxides

Abstract Anisotropic and efficient transport of ions under external stimuli governs the operation and failure mechanisms of energy-conversion systems and microelectronics devices. However, fundamental understanding of ion hopping processes is impeded by the lack of atomically precise materials and probes that allow for the monitoring and control at the appropriate time- and length- scales. In this work, using in-situ transmission electron microscopy, we directly show that oxygen ion migration in vacancy ordered, semiconducting SrFeO 2.5 epitaxial thin films can be guided to proceed through two distinctly different diffusion pathways, each resulting in different polymorphs of SrFeO 2.75 with different ground electronic properties before reaching a fully oxidized, metallic SrFeO 3 phase. The diffusion steps and reaction intermediates are revealed by means of ab-initio calculations. The principles of controlling oxygen diffusion pathways and reaction intermediates demonstrated here may advance the rational design of structurally ordered oxides for tailored applications and provide insights for developing devices with multiple states of regulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗