Search NASA⌕ Search

SEARCH · Search NASA

Results for “Burst Map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

26 records · Page 2

The Atacama Cosmology Telescope: Systematic Transient Search of Single Observation Maps

We conduct a systematic search for astrophysical transients using data from the Atacama Cosmology Telescope. The data were taken from 2017 to 2022 in three frequency bands spanning 77 to 277 GHz. In this paper, we present a pipeline for transient detection using single-observation maps where each pixel of a map contains one observation with an integration time of approximately 4 minutes. We detect 34 transient events at 27 unique locations. All but two of the transients are associated with Galactic stars and exhibit a wide range of properties. We also detect an event coincident with the classical nova YZ Ret and one event consistent with a flaring active galactic nucleus. We notably do not detect any reverse shock emission from gamma-ray bursts, a nondetection that may be in tension with current models.

79 ASTRONOMY AND ASTROPHYSICS↗

Probing primordial power spectrum and non-Gaussianities with fast radio bursts

We use the precision measurements of the arrivaltime differences of the same fast radio burst (FRB) source along multiple sightlines to measure the primordial power spectrum and Non-Gaussianities. The anticipated experiment requires a sightline separation of 100 AU, achieved by sending three or more radio telescopes to the outer solar system.The Shapiro time delays, measured relatively between different telescopes, are sensitive to the gradient field of the gravitational potential between different sightlines. Since the arrival time difference is independent of when the transient signal is emitted from the source, every measurement of the detected FRB source can be correlated. With enough FRB sources discovered, we can map the gravitational potential across the sky. We further calculate the two-point and three-point correlation function of the arrival time difference between telescopes for different FRB sources in the sky. If 10$^{4}$ FRBs were to be detected, our results suggest that this technique can test the inflationary scale-invariant power spectrum down to ∼ 10$^{3}$ Mpc$^{-1}$ and primordial Non-Gaussianities at a level of f$_{NL}$ ∼ 1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Decoding NGC 7252 as a blue elliptical galaxy

Elliptical galaxies with blue optical colours and significant star formation are hypothesised to be major merger remnants of gas-rich spiral galaxies or normal elliptical galaxies with a sudden burst of star formation. We present here a scenario in which blue elliptical galaxies identified in shallow imaging surveys may fail to recover faint features that are indicative of past merger activity using a nearby major merger remnant. Based on deep optical imaging data of the post-merger galaxy, NGC 7252, we demonstrate that the galaxy can appear as an elliptical galaxy if it is observed at higher redshifts. The main body and the low surface brightness merger features found at the outskirts of the galaxy are blue in the optical g – r colour map. We argue that the higher-redshift blue elliptical galaxies discovered in surveys as shallow as the SDSS or DECaLS may be advanced mergers whose defining tidal features fall below the detection limits of the surveys. This should be taken into consideration during the morphological classification of these systems in future and ongoing surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

BISON validation to in situ cladding burst test and high-burnup LOCA experiments

The process for developing and qualifying nuclear fuels for commercial nuclear application requires fundamental material development, characterization, and design; out-of-pile testing on unirradiated materials; integral fuel rod irradiations, testing, and postirradiation examinations; and transient analyses. The historical approach depends on the generation of large empirical datasets and series of integral fuel rod irradiations, and this approach ultimately takes ~20 years—or sometimes longer—to acquire data through extensive sequential testing. Thus, the qualification and eventual deployment of new fuel systems constitute a long process. However, recent technological advancements have provided researchers the opportunity to perform out-of-cell, in situ measurements to assess material performance for the duration of the experiment. One such example of this capability is the use of digital image coordination and thermal imaging to assess Zircaloy cladding performance under a simulated loss-of-coolant accident (LOCA) transient condition. In situ measurements generally provide high-fidelity strain, strain rates, and temperature surface maps. This is critical for the US nuclear industry, which is actively developing a technical basis to support extending the peak rod average burnup from 62 to ~75 GWd/tU and the deployment of accident-tolerant fuel. However, the US Nuclear Regulatory Commission (NRC) outlined in its research information letter several technical issues that the industry must address before extending burnup. One topic of specific interest is understanding the cladding balloon and rupture geometry during the LOCA heat-up phase. By leveraging these advanced in situ capabilities, this work used in situ data generated from a simulated LOCA to better understand high-temperature creep and its effect on Zircaloy balloon and rupture performance. Here, this work used the BISON fuel performance code to assess the high-temperature creep model predictions with in situ data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hypersonic wake velocity measurements using acetone molecular tagging velocimetry

Molecular tagging velocimetry, a minimally intrusive laser diagnostic, was used to find quantitative off-body velocity measurements in the wake of both strut-mounted and free-flight spheres in hypersonic flow. Acetone gas seeded in the flow was excited using the fourth harmonic of a pulse-burst Nd:YAG laser. The experimental tests were validated and compared to simulations using a continuous Galerkin flow solver and an adaptive mesh refinement process. Near the centerline in the wake of the sphere, velocities between −105 and 65 m/s were observed due to reverse flow in the viscous shear layer. Similarly, the simulated data showed negative velocity values in the shear layer region. Outside of the shear layer, average velocities of 730 m/s were observed in both the experimental and simulated results. The overall average uncertainty for the strut-mounted and free-flight cases was estimated to have an accuracy of ±4% (±35.5m/s or 4.9%). In conclusion, this non-intrusive technique provides a velocity map of the wake behind a sphere under hypersonic conditions.

42 ENGINEERING↗

BISON Validation to In-Situ Cladding Burst Test and High Burnup LOCA Experiments

The process to develop and qualify nuclear fuels for commercial nuclear application requires fundamental material development, characterization, and design; out-of-pile testing on unirradiated materials; integral fuel rod irradiations, testing, and post irradiation examinations (PIEs); and transient analyses. The historical approach depends on the generation of large empirical datasets and series of integral fuel rod irradiations, and this approach ultimately takes approximately 20 years—or sometimes longer—to acquire data through extensive sequential testing. Thus, the qualification and eventual deployment of new fuel systems constitute a long and drawn-out process. However, recent technological advancements have provided researchers the opportunity to perform out-of-cell, in-situ measurements to assess material performance for the duration of the experiment. One such example of this capability is the use of digital image coordination and thermal imaging to assess Zircaloy cladding performance under a simulated loss-of-coolant accident (LOCA) transient condition. In general, the in-situ measurements provide high-fidelity strain, strain rates, and temperature surface maps. This is critical for the United States nuclear industry, which is actively developing a technical basis to support extending the peak rod average burnup from 62 to ~75 GWd/tU and the deployment of accident-tolerant fuel. However, the Nuclear Regulatory Commission, through their research information letter, outlined a number of technical issues for the industry to address before extending burnup. One topic of specific interest is understanding the cladding balloon and rupture geometry during the LOCA heatup phase. Leveraging these advanced in-situ capabilities, this work intends to use insitu data generated from a simulated LOCA in the Severe Accident Test Station at Oak Ridge National Laboratory to better understand high-temperature creep and its impact on Zircaloy balloon and rupture performance. This work used the BISON fuel performance code to compare BISON’s high-temperature creep model predictions to in-situ data and identify limitations and gaps within the model. Additionally, BISON will subsequently be used to simulate relevant high-burnup LOCA tests. The results will be analyzed and compared to the available post-test data in a manner consistent with the approach outlined in the Nuclear Regulatory Commission research information letter.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mapping the scattered family tree of fission neutrons

A statistically predicted tendency for neutrons produced inside fission reactors to form in clusters can cause asymmetrical energy production that is counterbalanced, at least in part, by the spontaneous fission of radioactive material in the reactor. This neutron-clustering effect theory has been demonstrated in a nuclear reactor for the first time and was described in an article published by Los Alamos National Laboratory. The findings of a study supported by the Department of Energy’s Nuclear Criticality Safety Program, funded through the National Nuclear Security Administration, and carried out in collaboration with two French nuclear agencies—the Institute for Radiological Protection and Nuclear Safety (IRSN) and the Atomic Energy Commission (CEA)—could improve reactor safety and lead to more accurate simulations, according to LANL. The team found that a complete die-off was avoided in the small reactor because spontaneous fission—nuclear splitting of radioactive material inside reactors that is not caused by direct impact from a fission neutron—creates more neutrons. The balance of fission chain reactions and spontaneous fission lessens the impact of energy bursts created by clustering neutrons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mapping the Outcomes of Stellar Evolution in the Disks of Active Galactic Nuclei

The disks of active galactic nuclei (AGNs) are expected to be populated by numerous stars, either formed in the outer regions of the disk via gravitational instability or captured from the nearby nuclear star cluster. Regardless of their formation mechanism, these stars experience altered evolutionary paths, mostly shaped by the accretion of dense disk material. In this study, through the comparison of different timescales, we chart the evolutionary outcomes of these AGN stars as a function of disk radius and across a range of supermassive black hole masses, spanning from 10 6 to 10 9 M ⊙ , for two popular AGN disk models. We find that in the outer regions of the disk, stars evolve similarly to those in the interstellar medium, but in the inner and denser regions, accretion quickly turns low-mass stars into massive stars, and their fate depends on just how quickly they accrete. If accretion occurs at a faster rate than nuclear burning, they can reach a quasi-steady "immortal" state. If stars accrete faster than they can thermally adjust, runaway accretion occurs, potentially preventing a quasi-steady state and altering the disk structure. During the AGN lifetime, in the regions of the disk that produce massive stars, supernovae (SNe) and gamma-ray bursts (GRBs) may occur within the disk over a wide range of optical depths and ambient densities. Subsequently, in the final phase of the AGN, as the disk becomes depleted, formerly immortal stars will be unable to replenish their fuel, leading to additional SNe and GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗