Cassegrainian antenna subflector flange for suppressing ground noise Patent
Cassegrain antenna subreflector flange for suppressing ground noise and increasing antenna transmitting efficiency
Potter, P. D.↗
SEARCH · Search NASA
Results for “CASSEGRAIN ANTENNA”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NASA's Software Bank (Cassegrain Feed System)
When Scientific-Atlanta had to design a new Cassegrain antenna, they found that the COSMIC program, "Machine Design of Cassegrain Feed System" allowed for computer simulation of the antenna's performance enabling pre-construction changes to be made. Significant cost savings were effected by the program.
Source record↗
DSN 34-meter Antenna Optics Analysis for Wideband SETI Investigations
A DSN 34-meter symmetric Cassegrain antenna configuration is examined for wideband use over the frequency range of 1 to 10 GHz, rather than only at the narrow-band operational design frequencies of 2.295 GHz (S-band) and 8.448 GHz (X-band). Aperture efficiency and surface efficiency are calculated as the components determining the gain of the antenna. Noise temperature contributions arise from the ground, atmosphere, and quadripod scattering. These components are calculated as a function of frequency elevation angle to determine a G/T (gain/system noise temperature) figure-of-merit for a nominal 34-meter antenna configuration. A computational method was developed which will enable design of a multi-horn antenna feed system to optimally cover the 1 to 10 GHz frequency range.
Slobin, S. D.↗
An experimental investigation of the changes of VLBI time delays due to antenna structural deformations
Structural deformations primarily occur as functions of antenna elevation angle due to gravity loading. For a Cassegrain antenna, one of the major effects of structural deformation on measured VLBI time delays are those delay changes associated with axial subreflector displacement from its nominal position. Two types of time delay changes that occur when the subreflector is axially defocused are: a change which is a linear function of subreflector defocus position; and a cyclical change caused by multipath. Test results show that for the 64-m DSN antenna, the linear change is 1.8 times the subreflector defocus position, while the peak-to-peak change in cyclical variation is about + or - 3 cm when a spanned bandwidth of 38 MHz at 2290 MHz is used.
Otoshi, T. Y.↗
Design tradeoff study for reflector antenna systems for the shuttle imaging microwave system
A general tradeoff is made of the symmetric Cassegrain antenna with regard to the possibility of meeting a 90% beam efficiency. The effects of aperture taper and blockage are calculated using an adjustable sidelobe circular distribution. Numerical integration is used. For the feed spillover calculation, a low sidelobe symmetric feed pattern is used with the equivalent parabola and numerical integration. Reflector cross polarization is calculated using double numerical integration. Reflector back lobes are estimated from radiation pattern envelopes of commercial common carrier dish antennas. The curves allow a range of f/D to be determined for a specified edge taper and blockage diameter ratio, and with a table of Cassegrain parameters, a range of possible designs that meet the 90% beam efficiency is obtained. It is shown that the feed and reflector design and implementation must be carefully done.
Hansen, R. C.↗
Low noise microwave receiving systems on a 64 m antenna.
Review of the performance capability at S-, X- and K-band of the NASA/JPL 64-m Cassegrain antenna at Goldstone, California. The multiple feed system allows X- and K-band atmospheric research studies to be conducted simultaneously with mission directed S-band spacecraft tracking. A description of the antenna system and its multiple operation is followed by gain and efficiency comparisons at the three frequencies. The total operating system temperature and its frequency dependence are discussed. Antenna gain and efficiency, and zenith system operating temperature are summarized at S- and X-band, respectively, by 62 dB, 63%, 16K; and 72 dB, 52%, 24K. Preliminary measurements for K-band are 76 dB, 39%, 29K.
Reid, M. S.↗
Microwave delay characteristics of Cassegrainian antennas
A technique is presented in which the time an RF signal is delayed in propagating through a Cassegrain antenna is determined. The technique utilizes the group delay time and the envelope delay time as found from the antenna transfer function. The calculations show that a focused antenna is basically a nondispersive device whose delay time may be found from an optics formula. Small subreflector displacements result in significant delay changes requiring calibrations for many applications.
Cha, A. G.↗
A note on the computation of antenna-blocking shadows
A simple and readily applied method is provided to compute the shadow on the main reflector of a Cassegrain antenna, when cast by the subreflector and the subreflector supports. The method entails some convenient minor approximations that will produce results similar to results obtained with a lengthier, mainframe computer program.
Levy, R.↗
Millimeter-wave double-dipole antennas for high-gain integrated reflector illumination
A double-dipole antenna backed by a ground plane has been fabricated for submillimeter wavelengths. The double-dipole antenna is integrated on a thin dielectric membrane with a planar detector at its center. Measured feed patterns at 246 GHz agree well with theory and demonstrate a rotationally symmetric pattern with high coupling efficiency to Gaussian beams. The input impedance is around 50 ohms, and will match well to a Schottky diode or SIS detector. The double-dipole antenna served as the feed for a small machined parabolic reflector. The integrated reflector had a measured gain of 37 dB at 119 microns. This makes the double-dipole antenna ideally suited as a feed for high resolution tracking or for long focal length Cassegrain antenna systems.
Filipovic, Daniel F.↗
RF Design and Predicted Performance for a Future 34-meter Shaped Dual-reflector Antenna System Using the Common Aperture X-S Feedhorn
The Networks Consolidation Program (NCP) will utilize 34-meter shaped dual-reflector Cassegrain antennas. The shaping calculations, the X/S-band feedhorn to be used, and the predicted RF performance of this antenna system are discussed.
Williams, W. F.↗
The Effects of Multipath on the Measurement of Antenna Time Delays
This paper describes the errors associated with measuring time delays of signals propagating through the primary path of a large Cassegrain antenna.
time-delay↗
Design and performance analysis of the DSS-13 beam waveguide antenna
A new 34 m research and development antenna is currently being constructed prior to introducing beam waveguide (BWG) antennas and Ka-band (32 GHz) frequencies into the NASA/JPL Deep Space Network. The new 34 m antenna, fed with either a center or bypass BWG, will lose less than 0.2 dB (excluding surface root mean square and mirror misalignment losses), as compared with a standard-fed Cassegrain antenna a X- (8.4 GHz) and Ka-bands. The antenna is currently under construction and is scheduled to be completed July 1990. Phase 1 of the project is for independent X- and Ka-band receive-only tests. Phase 2 of the project is for simultaneous S- (2.3 GHz) and X-band or X- and Ka-band operation, and the design is currently under way.
Veruttipong, T.↗
The solar brightness temperature at millimeter wavelengths
Measurements of the brightness temperature of the sun near 36 GHz and 93 GHz were made using the new moon as a calibration source. Provided the brightness temperature of the moon is known and all measurements are reduced to the same zenith angle, a simple expression can be used for the sun-to-new moon ratio which is independent of antenna gain, atmospheric absorption and reemission, and radiometer calibration constants. This ratio was measured near 36 GHz and at two frequencies near 93 GHz with a Dicke switched superheterodyne radiometer system and a 2.4 m Cassegrain antenna. The slopes of the solar brightness temperature spectrum based on these ratios were measured. The absolute solar brightness spectrum derived from all current available measurements supplemented by the present ones is also plotted and discussed.
Kuseski, R. A.↗
A Deployable 4 Meter 180 to 680 GHz Antenna for the Scanning Microwave Limb Sounder
The Scanning Microwave Limb Sounder (SMLS) is a space-borne heterodyne radiometer which will measure pressure, temperature and atmospheric constituents from thermal emission between 180 and 680 GHz. SMLS, planned for the Global Atmospheric Composition Mission of the NRC Decadal Survey, uses a novel toric Cassegrain antenna to perform both elevation and azimuth scanning. These provide better horizontal and temporal resolution and coverage than were possible with elevation-only scanning at typical Low-Earth orbit spacing in the two previous MLS satellite instruments. Development of the SMLS antenna was the focus of a 2006 Small Business Innovative Research (SBIR) program whose phase II culminated in the fabrication and thermal stability testing of a composite demonstration model of the SMLS primary reflector. This reflector has the full 4m height and 1/3 the width planned for flight. An Instrument Incubator Program (IIP) titled "A deployable 4 Meter 180 to 680 GHz antenna for the Scanning Microwave Limb Sounder" continues development of the SMLS antenna with the study of 5 topics: 1) detailed mathematical modeling of the antenna patterns from which we simulate geophysical parameter retrievals in order to establish FOV performance requirements; 2) thorough correlation of finite element model predictions with measurements made on the SBIR reflector. We will again measure deformations of this reflector, under more flight-like thermal gradients, using higher precision metrology techniques available in a new large-aperture facility at JPL; 3) fabrication of a full-width primary reflector whose asbuilt surface figure will better meet the figure requirements of SMLS than did the SBIR reflector; 4) integration of the primary with other reflectors, and with residual front ends built in a 2007 IIP, in a breadboard antenna; and finally 5) RF testing of the breadboard on a Near Field Range at JPL. We report on significant progress in 3 areas of the current IIP: development of the mathematical model to predict SMLS antenna patterns and their application in a preliminary set of geophysical retrievals; the correlation between surface deformation predicted by finite element models and measurement in the 2009 isothermal stability tests of the SBIR, with implications for the thermal gradient testing to be performed at JPL; and aspects of the conceptual design of the full-width primary reflector to be fabricated and tested in the 2nd and 3rd years of the IIP.
heterodyne radiometer↗
Scan performance of dual offset reflector antennas for satellite communications
The basic numerical steps of a method to analyze dual offset reflector antennas are reviewed. The technique employs an alternative approach to calculating the secondary pattern of an arbitrarily shaped offset dual reflector antenna, and is based on the application of the geometrical theory of diffraction from the subreflector and physical optics (PO) scattering from the main reflector. The PO integral is evaluated using the Jacobi-Bessel series expansions, and numerical results are presented for the off-axis scan performance of an offset clear aperture Cassegrain antenna. Results indicate that the equivalent paraboloid concept can be used to determine the location of displaced feed and define the local optimal focal plane, and the scan performance of the Cassegrain reflector can be improved if the feed is located on the true opimal surface.
Rahmat-Samii, Y.↗
Proposed Ka-band array-fed near field Cassegrain system for NASA's Polar Probe Mission
A Ka-band array-fed near-field Cassegrain antenna envisioned for NASA's Solar Probe Mission is the basis of the present spacecraft telecommunications system, which is designed for operation at X-band up/downlink and Ka-band downlink. The hexagonal array employed, which is located at the Cassegrain point of the 0.75-m reflector, encompasses 37 active elements; each of these contains 1/4-W HEMT amplifiers. Relative to a TWTA-based system, this active array feed reduces mass, increases dc power efficiency, enhanced reliability, and reduces volume requirements.
Kellogg, K.↗
A measurement of the hyperfine structure of CO-17
It is pointed out that the isotope of carbon monoxide, CO-17, has appreciable hyperfine structure caused by the electric quadrupole and the magnetic dipole interactions of the O-17 nucleus which has a spin of 5/3. During a radioastronomical study of the structure and dynamics of cold interstellar clouds, it was found that the Bok globule B335 had an extremely small velocity dispersion such that the hyperfine components are clearly resolved. A graph is provided which shows the antenna temperature (a measure of intensity) of the CO-17 emission as a function of frequency. The hyperfine constants and line frequencies were redetermined for the CO-17 J=1 yields 0 rational transition. The observation of CO-17 was carried out with a 7 meter Cassegrain antenna during 1979 and 1980. The CO-17 molecular line parameters are listed in a table.
Frerking, M. A.↗
Enhanced imaging of reflector antenna surface distortion using microwave holography
Two signal processing techniques are discussed that improve the accuracy of a microwave holographic measurement by removing unwanted signals from the aperture distribution: pattern simulation and subtraction, and time domain filtering. Pattern simulation and subtraction involves modeling unwanted scattering mechanisms and then removing them from the measured far-field data. Measurements taken on a focal point geometry and a Cassegrain geometry at 11 GHz were processed by the holographic analysis system. Pattern simulation and subtraction was applied to both geometries. Surface deformation profiles generated for the Cassegrain antenna by this system were compared to an optical measurement of the main reflector surface.
Gilmore, Sean W.↗