SEARCH · Search NASA

Results for “CFP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2027

Hydrotreating pine-derived catalytic fast pyrolysis oil to jet fuel: Process durability and impact of operating conditions

Hydrotreating woody biomass-derived catalytic fast pyrolysis (CFP) oil to jet fuel has the potential to enhance energy security due to the large abundance of forest and woody resources. CFP oil produced from pine over ZSM-5 was hydrotreated over sulfided NiMo/Al 2 O 3 for 410 h to study the impact of hydrotreating conditions (pressure, temperature, and weight hourly space velocity (WHSV)). The degree of deoxygenation remained high across the tested hydrotreating conditions, and the products contained < 0.01 wt% oxygen. Increasing hydrotreating pressure from 84 to 125 bar enhanced hydrogenation of aromatic rings and the formation of cycloalkanes and increasing the temperature from 385 to 400 degrees C enhanced cracking and the formation of jet-range molecules. Decreasing the weight hourly space velocity from 0.2 to 0.1 g/(g cat h) further enhanced cracking and led to higher gasoline- and lower jet fuel-range fractions. The highest jet fuel fraction (49 wt%) was obtained at 400 degrees C, 125 bar, 0.2 g/(g cat h) WHSV. CFP oils produced from pine over phosphorous-modified ZSM-5 were hydrotreated at this condition for 588 h to investigate the process durability. The hydrogenation performance of the catalyst gradually stabilized in approximately 300 h after which the product composition remained constant. Of the final hydrotreated CFP oil, 53 wt% fell in the jet fuel range with most of the tested fuel properties meeting ASTM D4054 and/or ASTM D7566 specifications. The freeze points were < -50 degrees C vs. guideline of < -40 degrees C and the viscosities at -20 degrees C were 3.8-4.1 mm 2 /s vs guideline of 8 mm 2 /s. Increasing the fraction of cycloalkanes could increase the cetane number and heating value, which did not meet the guidelines.

09 BIOMASS FUELS↗

DOE OSTI2021

Biological upgrading of pyrolysis-derived wastewater: Engineering Pseudomonas putida for alkylphenol, furfural, and acetone catabolism and (methyl)muconic acid production

While biomass-derived carbohydrates have been predominant substrates for biological production of renewable fuels, chemicals, and materials, organic waste streams are growing in prominence as potential alternative feedstocks to improve the sustainability of manufacturing processes. Catalytic fast pyrolysis (CFP) is a promising approach to generate biofuels from lignocellulosic biomass, but it generates a complex, carbon-rich, and toxic wastewater stream that is challenging to process catalytically but could be biologically upgraded to valuable co-products. Here, we implemented modular, heterologous catabolic pathways in the Pseudomonas putida KT2440-derived EM42 strain along with the overexpression of native toxicity tolerance machinery to enable utilization of 89% (w/w) of carbon in CFP wastewater. The dmp monooxygenase and meta-cleavage pathway from Pseudomonas putida CF600 were constitutively expressed to enable utilization of phenol, cresols, 2- and 3-ethyl phenol, and methyl catechols, and the native chaperones clpB, groES, and groEL were overexpressed to improve toxicity tolerance to diverse aromatic substrates. Next, heterologous furfural and acetone utilization pathways were incorporated, and a native alcohol dehydrogenase was overexpressed to improve methanol utilization, generating reducing equivalents. All pathways (encoded by genes totaling ~30 kilobases of DNA) were combined into a single strain that can catabolize a mock CFP wastewater stream as a sole carbon source. Further engineering enabled conversion of all aromatic compounds in the mock wastewater stream to (methyl)muconates with a ~90% (mol/mol) yield. Biological upgrading of CFP wastewater as outlined in this work provides a roadmap for future applications in valorizing other heterogeneous waste streams.

(methyl)muconates↗

DOE OSTI2023

On the Role of Macrophysics and Microphysics in Km-Scale Simulations of Mixed-Phase Clouds During Cold Air Outbreaks

Regional atmospheric models struggle to maintain supercooled liquid in mixed-phase clouds during polar cold-air outbreaks (CAOs). Previous studies focused on the parameterization of aerosol, microphysics and turbulence to understand the origin of this widespread model bias. This study investigates the role of sub-grid cloud fraction parameterizations (CFP) in the simulation of mixed-phase cloud. Km-scale simulations are performed for a large number of CAO cases over Norway, for which continuous ground observations were collected at one site over 6 months. We use a novel analysis that attributes the cloud-radiative errors to deficiencies in specific cloud regimes. We show that the CFP matters for cloud-radiative effects in CAOs, but that it is probably not the primary cause of the lack of liquid water in simulated mixed-phase clouds. Of all the CFP sensitivities explored in this study, the prognostic representation of both liquid and ice shows most promise in increasing the liquid water path. A newly proposed hybrid CFP with prognostic frozen and diagnostic liquid cloud fraction reproduces some of the benefits of the prognostic scheme at reduced cost and complexity. All simulations appear to produce too large precipitation particles. As a result, reducing the snow deposition rate increases the liquid water path and improves the precipitation size distributions, while simulations are less sensitive to reduced riming rates.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Catalytic Bio-crude Production in a Novel, Short-Contact Time Reactor

RTI has developed a catalytic fast pyrolysis (CFP) process to produce biomass-based hydrocarbon replacement fuels. From a technology perspective, this advanced biofuels process produces liquid transportation fuels that can leverage capital expenditures in the existing petroleum distribution infrastructure. From a business perspective, this technology does not face potential market limitations caused by oxygenate blend limitations for light duty vehicle applications. A promising catalyst has been developed with excellent potential for deoxygenation to produce a hydrocarbon-rich biocrude that is more suitable for upgrading with traditional hydroprocessing technology. The role of the catalyst is to control the chemistry during biomass pyrolysis to produce a biocrude in a single step that has lower oxygen content and is more thermally stable than conventional biomass fast pyrolysis oil. Catalyst properties are optimized to minimize gas and coke production and improve catalytic deoxygenation and biocrude yields. Results from this project have demonstrated that biocrudes from catalytic fast pyrolysis contain <20 wt% oxygen, with the organic fraction as low as 12% oxygen. These oxygen numbers are > 50% lower compared to traditional fast pyrolysis oils. The biocrude produced from our CFP process can be upgraded to gasoline range hydrocarbons. A very conservative approach for upgrading included a preliminary stabilization step followed by a hydroprocessing step. The oxygen content in the upgraded product was decreased by 97% (to less than 3wt %) from the oxygen content of the biocrude sample. Additionally, the acid content was reduced by 99% from the acid content of the biocrude sample. In an optimized integrated process, the CFP step and the hydroprocessing (upgrading) step need to be carefully balanced to maximize the input biomass energy that is recovered in the finished biofuels. Hydrogen utilization and carbon recovery during both catalytic biomass pyrolysis and biocrude upgrading need to be optimized to maximize energy recovery in the finished biofuel. A nominal 1 ton per day (TPD) catalytic biomass pyrolysis system was designed based on the laboratory experimental data. The system was designed to achieve the short residence times (0.5–2 sec) and high heat transfer rates required for maximum liquid biocrude yields while optimizing process integration to maintain catalyst activity by continuous regeneration. The catalytic biomass pyrolysis reactor is a continuously circulating single-loop transport reactor design that is flexible enough to allow sensitivity studies around temperature, residence time, biomass feed rate, and catalyst-to-biomass ratio (i.e., catalyst circulation rate) for process optimization. For a nominal 100 lb/hr feed rate of dry biomass, the products include ~25 lb/hr char and coke, ~20 lb/hr permanent gases, and ~55 lb/hr condensable vapors. Pyrolysis temperatures are 350–600°C, and the system is operated close to ambient pressure. Production of the catalyst developed within the project was scaled up to provide enough material (200kg) for bench-scale testing. The 1TPD bench-scale unit was fabricated, installed and commissioned with this project. Biocrude samples from wood were produced in this unit with the CFP catalyst with material balance > 90%. The intermediate biocrude yields and chemical composition compare well with previous laboratory results and a hydroprocessing strategy for upgrading the resulting biocrude was developed. The experimental results obtained within this project were used to develop a process model for a 2000 TPD commercial facility. Detailed flow sheets were developed for all major unit operations in the process and provided a basis for an economic analysis to develop capital and operating costs. Estimates of the biofuel production costs were used to develop internal rates of return for the yields and compositions measured for the current state of technology at the end of this project and for the yields anticipated for an optimized (nth plant) scenario as additional process improvements are made.

09 BIOMASS FUELS↗

DOE OSTI2021

Catalytic Fast Pyrolysis for Chemicals: Cooperative Research and Development, CRADA Number CRD-16-00637 (Final Report)

The purpose of this partnership between the ExxonMobil Chemical Company and NREL is to advance the state of the art for converting biomass to liquid hydrocarbons using catalytic fast pyrolysis (CFP), with particular emphasis on directing and improving yields of such liquid hydrocarbons for uses in commodity chemical markets. CFP of biomass is a promising route for the production of renewable fuels and chemicals, and the key driver for economic viability is carbon yield to valuable products. The majority of prior CFP work has been targeted at fuel production, but this CRADA seeks to pursue routes to chemical co-products, thereby enhancing the overall economic viability of CFP. This project is beneficial to the public because it advances a technology that could one day provide renewable fuels and chemicals to our economy, thus improving the sustainability of our transportation and chemical manufacturing sectors.

09 BIOMASS FUELS↗

DOE OSTI2025

The Development of Catalysts for Upgrading of Pyrolysis Vapor for Refinery Feedstocks and Intermediates (CRADA Final Report)

Catalytic fast pyrolysis (CFP) is a versatile technology platform to convert biomass into fungible hydrocarbon transportation fuels and chemical co-products. Key technical barriers to reaching this goal include increasing the product yields and achieving the desired fuel properties for gasoline, diesel, and jet range fuels or blendstocks that would be suitable for introduction into existing refinery unit operations. Overcoming these barriers will require durable catalysts that are effective at upgrading and stabilizing biomass pyrolysis vapors. Towards these goals, this CRADA leveraged NREL experience as a leader in biomass pyrolysis research and Johnson Matthey's (JM) experience as a leader in the production of advanced catalytic materials. The scope spanned CFP catalyst development, characterization, multi-scale reaction testing, and computational modeling. CRADA benefits to DOE, Participant, and U.S. Taxpayer: Assists laboratory in achieving programmatic scope, Uses the laboratory’s core competencies. The purpose of this CRADA was to develop and deploy catalysts for biomass CFP to help achieve cost-competitive biofuels and bio-based products. This was accomplished through a close collaboration between biomass conversion researchers at NREL and catalyst development researchers at JM. Summary of Research Results: Focus Area 1. Foundational research on catalytic conversion and deactivation: Key interactions between pyrolysis vapors and heterogeneous catalysts were probed through catalyst characterization, model compound reaction testing, and atomistic-scale computational modeling. Catalyst development focused on multifunctional materials, which include zeolites, oxides, carbides, and nitrides. Computational modeling identified reaction mechanisms and elucidated surface chemistry to test hypotheses regarding mechanisms of deoxygenation, coupling, cracking, dehydration, coke formation, hydrogen transfer, and aromatic ring reactions. This information was used to design multifunctional catalysts to increase product yields, control product selectivity, and reduce deactivation during CFP and downstream processing steps. The results served to increase fundamental understanding of key catalyst attributes and durability features for the upgrading of biomass pyrolysis vapors. Model compound experiments confirmed the importance of metal-acid bifunctionality for the deoxygenation of lignin-derived phenolic species under hydrodeoxygenation conditions. This insight led to the development of catalysts such as Pt/TiO2 and Mo2C, which were confirmed as high-performing materials during subsequent bench-scale experiments using biomass-derived pyrolysis vapors. This focus area also led to the identification of important catalyst deactivation mechanisms associated with the deposition of inorganic contaminants such as potassium. The molecular-level insight from model compound experiments and computational modeling, shown in Figure 1, informed the development of regeneration procedures that have been shown to be effective for restoration of > 90% of initial catalyst activity. This understanding has subsequently been translated to other catalyst systems, including zeolite materials that can be operated without requirements for co-fed hydrogen.

09 BIOMASS FUELS↗

DOE OSTI2022

Assessing the Role of the Support in Acetic Acid Hydrodeoxygenation Selectivity on Pt/TiO2

To produce drop-in quality biofuels following the thermochemical conversion of biomass via catalytic fast pyrolysis (CFP), hydrodeoxygenation (HDO) reactions can be performed to remove excess oxygen and create a more stable bio-oil product. HDO reactions involve co-feeding the CFP vapor-phase product and H2 gas over bi-functional catalysts, such as noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2). Recent model-compound studies, focusing on important classes of species in the CFP vapor mixture, have sought to determine the role of the various Pt/TiO2 actives sites (i.e., Pt-metal, TiO2-support, Pt-TiO2-interfacial sites) in producing the observed desired deoxygenation and undesired decarboxylation/decarbonylation products. One important class of compounds in the CFP vapor-phase product is carboxylic acids (e.g., acetic acid). Prior experimental work on acetic acid HDO (AA-HDO) found that Pt/C and Pt/TiO2 catalysts favored the formation of undesired C-C and desired C-O bond-dissociation products; however, the fundamental surface chemistry driving this shift in selectivity has not been established. This presentation employs atomic-scale modeling to determine, through comparisons of adsorption and reaction energetics, how Pt-metal, Pt-TiO2-interface, and interfacial-vacancy sites catalyze the competing reaction pathways for AA-HDO. Our analysis indicates that hydroxyl vacancies at the Pt-TiO2 interface are critical for lowering barriers for C-O bond-cleavage steps, such that they become favorable/competitive with respect to C-C bond-dissociation steps.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

DOE OSTI2022

Accelerating Catalyst Development for Biofuel Production through Multiscale Catalytic Fast Pyrolysis of Biomass over Mo2C

Advanced catalytic materials play an enabling role in producing renewable fuels and chemicals from biomass, thereby helping meet the global climate-change goals set forth by the Intergovernmental Panel on Climate Change. Herein, we present a multiscale approach to accelerate the catalyst-process development cycle for catalytic fast pyrolysis (CFP) of biomass over Mo2C. Mo2C has been shown to possess co-localized acidic and metallic sites and exhibit high activity for deoxygenation of biomass pyrolysis model compounds. However, critical knowledge gaps remain regarding the effectiveness of this catalyst for CFP of whole biomass. We address these knowledge gaps and demonstrate that Mo2C is effective at deoxygenating biomass-pyrolysis products in the presence of H2 but that it undergoes rapid selective and non-selective deactivation. The knowledge gaps addressed from this integrated study, targeting appropriate experiments across scales and feed types, enabled identification of critical modifications for advancing the CFP catalyst-process development cycle.

biofuels↗

DOE OSTI2025

Reducing Coke and Increasing Bio-Oil Yield during Catalytic Fast Pyrolysis of Biomass Using Phosphorus-Modified Zeolite Catalysts

Catalytic fast pyrolysis (CFP) is a promising strategy for producing hydrocarbon transportation fuels from biomass feedstocks. However, catalyst development is needed to increase bio-oil yields and enhance process economics. In this work, we demonstrate how post synthetic modification of formed ZSM-5 with phosphorus shifts CFP selectivity from coke and light gases toward the desired bio-oil product. Microscale experiments demonstrated reduced coke production relative to unmodified ZSM-5 and identified an optimal P loading. Extensive catalyst characterization revealed that P interacted with Al sites to reduce the acid site density, with preferential binding to the strongest acid sites. Insights from the microscale experiments were leveraged to produce kilogram quantities of formed P-ZSM-5 for evaluation in a larger semi-integrated process. These experiments generated liters of bio-oil that was hydrotreated and fractionated into gasoline, diesel, and jet cuts. The phosphorus-modified ZSM-5 improved CFP bio-oil yield, resulting in an 11% relative increase in the carbon yield from biomass to aviation fuel and a 14% decrease in the minimum fuel selling price. These results highlight the impact targeted changes in catalyst acidity, achieved by adding 2.5 wt % P, can have on the carbon efficiency and feasibility of fuel production from biomass feedstocks.

09 BIOMASS FUELS↗

DOE OSTI2021

Predicting Thermal Excursions During in situ Oxidative Regeneration of Packed Bed Catalytic Fast Pyrolysis Catalyst

Ex situ catalytic fast pyrolysis (CFP) uses a secondary reactor to upgrade biomass pyrolysis vapors to stabilized CFP oils with reduced oxygen content. In one configuration, the secondary reactor is operated as a packed-bed swing reactor system which allows coke-deactivated beds to be decarbonized in situ while other beds remain online for vapor upgrading. In situ decarbonization must be done carefully to avoid irreversible deactivation and/or physical degradation of catalyst pellets. Given that packed bed reactors are well known to have poor heat transfer characteristics, this is a critical issue impacting scaleability and commercial viability of the technology. To predict thermal excursions during regeneration, finite element computational models have been built to assist in scaling up oxidative decarbonization of a Pt/TiO2 CFP catalyst (0.5 mm spheres) from a bench scale packed bed with 100 g of catalyst to a pilot scale packed bed with 2 kg of catalyst and internal cooling tubes. Based on transient measurements of outlet temperature and effluent CO2 concentration, and using an assumed coke profile and activation energy, this paper demonstrates that specific combinations of effective thermal conductivity and wall heat transfer coefficient can fit bench scale oxidative regeneration data equally well. For the upscaled 2 kg bed, four bench-scale “best fit” parameter pairs give different predictions for location and magnitude of thermal excursions, with the maximum computed bed temperature gradients ranging from 30 °C cm-1 to as high as 3000 °C cm-1. The larger the fraction of heat removal by conduction through the cooling tubes, the greater the differences between the parameter pairs. The modelling results presented in this paper cast doubt on the industrial viability of the proposed combination of catalyst, bed and regeneration process, and point to the need for alternate reactor designs. However, there is considerable uncertainly in some of the key model parameters. The reliability of model predictions can be increased by adding more temperature measurements at key bed locations, testing additional variations in process conditions, performing careful bed dissections to determine the true coke profile, and perhaps most importantly, directly measuring the effective thermal conductivity of the catalyst pellets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Creating pathways to renewable fuels, chemicals, and materials through improved catalyst formulations and integrated process development.

Yung, Matthew M.↗

DOE OSTI2020

Separation of High Purity Oxygenated Aromatics from Catalytic Fast Pyrolysis Organic Streams

Thermochemical conversion of lignocellulosic biomass offers an attractive route to produce fuels and chemicals. Specifically, catalytic fast pyrolysis (CFP) oils have been shown to contain a high concentration of oxygenated aromatics, which can be isolated as value-added co-products. Purification of oxygenated aromatics can be a viable pathway to more economically competitive biorefineries, yet the isolation of highly pure coproduct streams remains technically challenging due to the high chemical heterogeneity of thermochemical process steams. Here, we demonstrate an industrially scalable process for isolating phenol, a widely used precursor to plastics, from CFP oil. Importantly, we leverage standard industrial processes, such as distillation, liquid-liquid extraction, and crystallization, to achieve phenol with 97% purity. In addition, the primary distillation of the CFP oil yielded several other fractions that contain chemicals with the potential to be isolated (e.g. cyclic ketones, cresols, and guaiacols). This work provides a technically feasible path to high purity oxygenated aromatics that has the potential to offset fuel production costs in a biorefinery.

09 BIOMASS FUELS↗

DOE OSTI2020

Molecular Weight Distribution Analysis of Pyrolysis Oils by Gel Permeation Chromatography

Comprehensive analysis of the molecular weight distribution of raw and catalytic fast pyrolysis oils derived from biomass remains a key technical hurdle to understanding oil quality as it relates to downstream use and multiple methods may be necessary to accurately represent all components present. Here, we report the molecular weight distribution metrics of fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) oils as determined by gel permeation chromatography (GPC) combined with UV-diode array (UV), differential refractive index (RI), and multi-angle laser light scattering (MALS) detection. The measured molar mass distributions revealed that FP oil consisted of a higher proportion of larger products relative to the low molecular weight products contained in the CFP oil. GPC/RI and UV methods showed FP oil to have higher weight-average molecular weight (Mw) and number-average molecular weight (Mn) than CFP oil based on elution time. However, GPC/MALS, determined the two oils to have similar overall molecular weight distribution metrics (Mw and Mn) and yielded values significantly higher than those determined by RI and UV detectors relative to external standards. Overall, the use of a multiple detection GPC method could enable a more accurate comparison and determination of true molecular weight metrics of bio-oils.

BIOMASS FUELS↗

DOE OSTI2022

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

DOE OSTI2023

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

DOE OSTI2026

Electrocatalytic Hydrotreatment of Bio-Oil: Exploring Interactions Between Functional Groups

Electrocatalytic hydrotreatment (ECH) is being explored as a sustainable route for upgrading bio-oil to renewable fuels and chemicals. Bio-oil, produced by the fast pyrolysis of lignocellulosic biomass, is a complex mixture of compounds with various oxygen-containing functional groups, such as anhydrosugars, carboxylic acids, ketones, aldehydes, furans, phenols and alcohols. The ECH of several bio-oil model compound binary mixtures was conducted to investigate the interactions between these functional groups. Notably, phenolic compound reduction was significantly inhibited in the presence of aldehydes, particularly furfural. A strategy involving the reagent-based reduction of the aldehyde to an alcohol prior to ECH was shown to partially mitigate this inhibitory effect. Additionally, qualitative studies on the ECH of catalytic fast pyrolysis (CFP) oil with low aldehyde content showed promising results. These studies achieved the conversion of cyclopentenones and phenolic compounds present in the CFP oil to cyclopentanols and cyclohexanols, respectively.

09 BIOMASS FUELS↗

DOE OSTI2022

Co-processing catalytic fast pyrolysis oil in an FCC reactor

Here, studies of co-processing catalytic fast pyrolysis (CFP) oil with vacuum gas oil (VGO) are conducted in a Davison Circulating Riser (DCR). The CFP oil (CFPO) for this study was produced by upgrading fast-pyrolysis vapors from pine in an ex-situ fixed-bed reactor. CFPOs were co-processed at up to a volume fraction of 0.05 with VGO at 521 degrees C and 257 kPa. The yields of oil, aqueous phase, tail gas, and coke were measured. The amount of coke was determined from the carbon containing components in the regenerator flue gas. A compositional analysis was conducted with gas chromatography and elemental analyzers. The organic liquids were distilled into gasoline, jet-fuel, diesel, and resid fractions. A biocarbon analysis was conducted on the organic phase and its individual boiling-point fractions. The results show a small decrease in liquid yield and a generally increased gas yield when co-processing CFPO with VGO. The experiments showed that 75%-100% of biocarbon is incorporated into liquid fuels relative to fossil carbon, depending on catalyst and CFPO. The measurements indicate that cracked CFPO components are predominantly included in the jet-fuel and diesel fractions. A techno-economic analysis (TEA) estimated the minimum fuel selling price (MSFP) for fuel-range products derived from FCC co-processing of CFPO at 24 to 29 $\$$/GJ ($\$$2.90 to $\$$3.50 per gasoline-gallon equivalent; GGE) at a yield of 4.87-7.14 GJ/t(biomass) or 40-58 GGE/t.

09 BIOMASS FUELS↗

DOE OSTI2024

Techno-economic and life-cycle analysis of strategies for improving operability and biomass quality in catalytic fast pyrolysis of forest residues

Many of the challenges faced by the first commercial biorefineries were associated with feedstock handling, quality, and cost. Strategies are needed to enable further expansion of biorefineries and meet the growing demand for bio-based fuels and products. Here, we examine 2 key feedstock challenges and mitigation strategies in the context of a catalytic fast pyrolysis (CFP) biorefinery: (1) the operability of the feed system, which may be improved by modifying the minimum particle size fed to the reactor, and (2) the quality of the biomass, which may be improved by employing air classification to remove undesirable material and increase fuel yields. We conduct techno-economic analysis (TEA) and life-cycle analysis for these strategies, employing a discrete event simulation model for biomass preprocessing combined with a series of correlations developed from literature data and a rigorous CFP conversion model. Our results highlight the importance of balancing increased cost and material losses from preprocessing against improved operability and fuel yields. Economics and sustainability were optimized when operating at the lowest minimum particle size, emphasizing the importance of minimizing material losses while maintaining the operability of the process. Economically, additional costs and material losses from air classification could be acceptable due to improved biomass conversion, and an optimum air classification speed was identified; however, the fuel GHG emissions were minimized when air classification was not used. Valorizing material removed during preprocessing as a coproduct could improve economics and sustainability, decreasing the burden of material losses.

09 - BIOMASS FUELS↗