Search NASA⌕ Search

SEARCH · Search NASA

Results for “COGENERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Experimental observation of the behaviour of cogenerated dusty plasma using a bipolar pulsed direct current power supply

We have experimentally observed the behaviour of cogenerated dusts in unmagnetized plasma produced using a bipolar pulsed dc power supply. In this experiment, the dust particles have been generated through sputtering of graphite cathode and were stratified between two electrodes. This stratification of dust clouds has obtained at a typical range of plasma parameters, namely, 650 V (peak-to-peak) with 0.2 mbar pressure. In above condition, we detected the Taylor-like instability at the interface of two dusty clouds with different densities. A very less dust density (void like) region inside the lesser dust density portion is also noted. Again, it has been observed that a self excited dust density wave propagates towards the higher density dust fluid inside the system as well as a stationary band structure of thin multiple layers of dust particles when we apply a higher voltage (750 V peak-to-peak). The wavelength, phase velocity, and frequency of the excited wave have also been estimated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatiotemporal evolution of dielectric driven cogenerated dust density waves

An experimental observation of spatiotemporal evolution of dust density waves (DDWs) in cogenerated dusty plasma in the presence of modified field induced by glass plate is reported. Various DDWs, such as vertical, oblique, and stationary, were detected simultaneously for the first time. Evolution of spatiotemporal complexity like bifurcation in propagating wavefronts is also observed. As dust concentration reaches extremely high value, the DDW collapses. Also, the oblique and nonpropagating mode vanishes when we increase the number of glass plates, while dust particles were trapped above each glass plates showing only vertical DDWs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proposal of a novel multifunctional energy system for cogeneration of coke, hydrogen, and power - article no. 052001

This paper proposes a novel multifunctional energy system (MES), which cogenerates coke, hydrogen, and power, through the use of coal and coke oven gas (COG). In this system, a new type of coke oven, firing coal instead of COG as heating resource for coking, is adopted. The COG rich in H{sub 2} is sent to a pressure swing adsorption (PSA) unit to separate about 80% of hydrogen first, and then the PSA purge gas is fed to a combined cycle as fuel. The new system combines the chemical processes and power generation system, along with the integration of chemical conversion and thermal energy utilization. In this manner, both the chemical energy of fuel and thermal energy can be used more effectively. With the same inputs of fuel and the same output of coking heat, the new system can produce about 65% more hydrogen than that of individual systems. As a result, the thermal efficiency of the new system is about 70%, and the exergy efficiency is about 66%. Compared with individual systems, the primary energy saving ratio can reach as high as 12.5%. Based on the graphical exergy analyses, we disclose that the integration of synthetic utilization of COG and coal plays a significant role in decreasing the exergy destruction of the MES system. The promising results obtained may lead to a clean coal technology that will utilize COG and coal more efficiently and economically.

08 HYDROGEN↗

Robust Combined Heat and Hybrid Power (CHHP) for High Electrical Efficiency Cogeneration

Georgia Tech (Prime Recipient), the University of Texas at El Paso (UTEP) and the National Energy Technology Laboratory (NETL) investigated a hybrid fuel cell/ gas turbine system concept as a combined heat and hybrid power (CHHP) system for both robust and high power-to-process heat ratio cogeneration. The novelty of the proposed system entailed the distinct, elevated electrical efficiencies it maintains while simultaneously supporting a broad span of heating needs (e.g., supply temperatures) demanded across variable heat loads. The scope included: 1) leveraging a pioneering national lab facility configured for dynamic system operability development of hybrid fuel cell/gas turbine cycles; 2) enabling technology development to adjust and modulate the quality and quantity of thermal supply to bottoming heat loads via novel extreme temperature gas bypass valves. Hybrid fuel cell/gas turbine systems have primarily been reduced-to-practice in a constrained (e.g., initial proof-of-concept) manner and have still demonstrated considerable electrical efficiencies. However, these pre-pilot systems have focused upon electrical efficiencies and electrical power generation as the exclusive energy demand. Such hybrid systems had not been extensively researched or developed for flexible and variable operation consisting of both power and heat demands; however, these variable combined power and heat demands are characteristic of many types of manufacturers such as animal/poultry processing, bakeries and milk/flour/pastry manufacturing, textile mills, and electrochemical processing. Commercially, developing the system into a working combined heat and power system benefits these types of manufacturers by allowing them to meet their power and heat demands at a lower cost, higher efficiency, and/or through onsite generation. Therefore, the technical scope of this project was largely to study and facilitate these hybrid systems as combined heat and hybrid power (CHHP) systems that include dynamic operability for variable heat and power loads and/or grid dynamics for various types of manufacturers. Simulation results were used to predict the performance of the CHHP system and conceptually develop it to achieve desired dynamic operability. Experimentally, the primary goal was to design, manufacture, and experiment upon a high-temperature bypass valve. Experimental data included air mass flow rates through the valve orifice when the valve was changed to variable extent between fully closed and fully open. The experimental data was then used to create a semi-empirical computational model of the bypass valve. Concluded simulation goals for the research included developing computational heat exchanger models for the hybrid system inclusive of the bottoming heat exchanger and the recuperative heat exchanger, and then combining the computational recuperator model with the computational valve model. Afterwards, the computational models were then integrated to predict the dynamic operation of hybrid fuel cell/gas turbine cycles throughout a design space and reporting such. The scope stated in the preceding paragraph was packaged into five specific goals: 1) enabling the simulation of dynamic combined heat and power through the creation of computational, modular heat exchanger models; 2) simulation and exploration of the CHHP system’s performance by integrating the heat exchanger models with the national lab’s pre-existing hybrid system (computational) simulation, but without the recuperator bypass valve concept in order to initially determine how the (baseline) system behaves and can be controlled in order to meet variable heat and power demands; 3) development and initial deployment of the high-temperature recuperator bypass valve technology in order to confirm and characterize the approach; 4) usage of the experimental data for the valve to create a semi-empirical computational model for the bypass valve which could then be combined with the heat exchanger computational models; 5) repeat of the second task of simulating and exploring the system’s performance, but this time including the bypass valve to resolve its efficacy. Tasks were successfully completed, and the general notion of flexibly operating, high electrical efficiency CHHP was further corroborated. Supportive details are provided in the report.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Investigation of Solar Cooling Cogeneration Plant

The deficiency in the energy for the space cooling is overcome by solar energy. Still the input energy is minimized by integrating both power and cooling cycle in common platform, such as working fluid, component and working parameters. The aqua-ammonia is used in both power cycle and vapor cooling cycle. The generator is common for cycles for the production of ammonia vapor. The analyses are made to find out the operational parameters for the cooling cogeneration cycle with solar as source. The analyses are done for the proposed cycle with various atmosphere temperatures. At absorber concentration of 0.42 and turbine inlet concentration of 0.90, with solar collector exit temperature of 155°C and atmosphere temperature of 30°C the generated power and cooling are 21.88 and 215.79 kW, respectively. The power and cooling output range can alter by varying turbine inlet concentration and temperature.

14 SOLAR ENERGY↗

Economic Dispatch Model of Nuclear High-Temperature Reactor with Hydrogen Cogeneration in Electricity Market

Hydrogen produced without carbon emissions could be a useful fuel as nations look to decarbonize their electricity, transport, and industry sectors. Using the iodine–sulfur (IS) cycle coupled with a nuclear heat source is one method for producing hydrogen without the use of fossil fuels. An economic dispatch model was developed for a nuclear-driven IS system to determine hydrogen sale prices that would make such a system profitable. The system studied is the HTTR-GT/H2, a design for power and hydrogen cogeneration at the Japan Atomic Energy Agency’s High Temperature Engineering Test Reactor. This study focuses on the development of the economic model and the role that input data plays in the final calculated values. Using a historical price duration curve shows that the levelized cost of hydrogen (LCOH) or breakeven sale price of hydrogen would need to be 98.1 JPY/m3 or greater. Synthetic time histories were also used and found the LCOH to be 67.5 JPY/m3. The price duration input was found to have a significant effect on the LCOH. As such, great care should be used in these economic dispatch analyses to select reasonable input assumptions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Techno-Economics of Cogeneration Approaches for Combined Power and Desalination From Concentrated Solar Power

For many decades, integration of concentrated solar power (CSP) and desalination relied solely on the use of conventional steam Rankine cycles with thermally based desalination technologies. However, CSP research focus is shifting toward the use of supercritical CO 2 Brayton cycles due to the significant improvement in thermal efficiencies. Here, we present a techno-economic study that compares the generated power and freshwater produced from a CSP system operated with a Rankine and Brayton cycle. Such a study facilitates co-analysis of the costs of producing both electricity and water among the other trade-off assessments. To minimize the levelized cost of water (LCOW), a desalination facility utilizing multi-effect distillation with thermal vapor compression (MED/TVC) instead of multistage flash distillation (MSF) is most suitable. The techno-economic analysis reveals that in areas where water production is crucial to be optimized, although levelized cost of electricity (LCOE) values are lowest for wet-cooled recompression closed Brayton cycle (RCBR) with MSF (12.1 cents/kWh e ) and MED/TVC (12.4 cents/kWh e ), there is only a 0.35 cents/kWh e increase for dry-cooled RCBR with MED/TVC to a cost of 12.8 cents/kWh e . In conclusion, this suggests that the best candidate for optimizing water production while minimizing both LCOW and LCOE is dry-cooled RCBR with MED/TVC desalination.

14 SOLAR ENERGY↗

Technoeconomic assessment of hydrogen cogeneration via high temperature steam electrolysis with a light-water reactor

Increased electricity production from renewable energy resources, coupled with low natural gas (NG) prices, has caused existing light-water reactors (LWRs) to experience diminishing returns from the electricity market. This reduction in revenue is forcing LWRs to consider alternative revenue streams, such as introduction hydrogen production or desalination, to remain profitable. This paper performs a technoeconomic assessment (TEA) regarding the viability of retrofitting existing pressurized-water reactors (PWRs) to produce green hydrogen (H 2 ) via high-temperature steam electrolysis (HTSE). Such an integration would allow nuclear facilities to expand into additional markets that may be more profitable in the long term and eliminate CO 2 emissions from the hydrogen production process. Here, to accommodate such an integration, a detailed single market levelized cost of hydrogen (LCOH) and multimarket analyses were conducted of HTSE process operation, requirements, costing, and flexibility. Alongside this costing analysis, market analyses were conducted on the electric and hydrogen markets in the PJM interconnect. Utilizing a novel stochastic, dispatch optimization approach results suggest that a positive gain is achievable, and by operating in multiple markets, the nuclear facility can avoid the sale of electricity during times of low electricity market pricing, while maintaining the ability to capitalize on the high electricity market pricing. It should be noted that the analysis conducted is a differential cash flow analysis and, as such, does not present profit levels. LCOH analysis results demonstrate the potential exists to produce hydrogen at a cost as low as $1.20/kg. This price is lower than traditional steam methane reforming (SMR) allowing nuclear based hydrogen production to disrupt the existing hydrogen production market.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cogeneration of hot electrons from multiple laser-plasma instabilities

Interactions of two plasmon decay (TPD) and side stimulated Raman scattering (SSRS) were studied using 3-D particle-in-cell simulations under ICF-relevant conditions for linearly and circularly polarized lasers. In the linear stage, SSRS took place under n e = 0.235n c and TPD dominated near the quarter-critical density surface and their growth rates agreed with theory. In the nonlinear stage, SSRS reduced TPD through pump depletion. Hot electrons were found to be first accelerated by the SSRS plasma waves and then by TPD plasma waves through a co-generation mechanism. Compared to the linearly polarized case with the same laser intensity, both SSRS and TPD were reduced due to the lower laser amplitude in the circularly-polarized case. As a result, a 30 percent decrease in hot electron flux was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preliminary Feasibility of Value-Added Products from Cogeneration and Hybrid Energy Systems in Wyoming

Wyoming has a wealth of primary energy resources in the forms of coal, natural gas, wind, uranium, and oil shale. Most of Wyoming's coal and gas resources are exported from the state in unprocessed form rather than as refined higher value products. Wyoming's leadership recognizes the opportunity to broaden the state’s economic base energy resources to make value-added products such as synthetic vehicle fuels and commodity chemicals. Producing these higher value products in an environmentally responsible manner can benefit from the use of clean energy technologies including Wyoming’s abundant wind energy and nuclear energy such as new generation small modular reactors including the high temperature gas-cooled reactors. The Wyoming Business Council (WBC), under direction from the State’s Legislature, commissioned the Idaho National Laboratory (INL) to complete evaluations of selected energy futures for Wyoming, focusing specifically on the benefits of hybrid energy systems that would take advantage of all of the state’s energy resources. This work was accomplished by two complementary activities. First, a collaborative effort of the Wyoming Business Council, tire University of Wyoming and the Idaho National Laboratory focused on screening-level analysis of a range of hybrid energy systems using new small modular nuclear reactors for the conversion of coal and natural gas into synthetic fuels and commodity chemicals in configurations designed to also stabilize wind power generation. This report summarizes the outcome of this first activity. Second, a more rigorous analysis led by the NGNP Industry Alliance in collaboration with the Idaho National Laboratory to evaluate the application of the high temperature, gas-cooled nuclear reactor (HTGR) to enhance coal and natural gas conversion to higher value products and electrical power. The results, conclusions, and recommendations of the HTGR applications work are presented in INL/EXT-12-26732, Energy Development Opportunities for Wyoming. The conclusions of these evaluations provide a conceptual foundation upon which Wyoming can form a partnership with industry to lay out a strategy and plan of action that can develop leading to a state-wide energy economy.

10 SYNTHETIC FUELS↗

Electrogenerative Reactors for Process Intensified Cogeneration of Power and Liquid Fuel from Shale Gas

With the abundance of natural gas and its primary components of methane, ethane and propane, there is the opportunity to convert these light alkanes to higher-value products. The growth in natural gas supply in the U.S. has increased substantially since the mid-2000s due to advances in horizontal drilling and hydraulic fracturing. As petroleum prices are volatile, natural gas resources are progressively attractive as alternative fuel sources. However, many of these shale gas wells are in regions of the U.S. that are remote and costly to transport to petrochemical and refining centers. In addition, much of this shale gas is “wet gas” that contains condensable amounts of ethane. While dedicated ethane gas pipelines have been built to get a small fraction of this gas to market, they are very capital intensive and compete for existing land use. As a result of this Phase I project, we developed a process to convert ethane to a transportable liquid fuel. This was achieved by implementing process intensification for this gas-to-liquids approach; we use novel eletrogenerative reactors in a two-step process rather than multi-step well-known technologies such as Fisher-Tropsch synthesis. These reactors borrow on well proven solid oxide fuel cell technology. Therefore, when produced in mass will be a very low-cost modular chemical reactor. This project demonstrated that EcoCatlaytic’s catalysts are highly selective towards ethylene and are compatible with anode materials. These integrated catalysts with the anode were able to maintain stable activity under ethane. Process simulations demonstrate an energy savings while producing gasoline and electricity for a modular system that produces 1,000 bbl/day gasoline. The system, not only produces gasoline, but also generates electricity which is a very valuable commodity in the remote shale gas facilities. This process could potentially allow remote natural gas producers to upgrade their feedstock to valuable gasoline on-site rather than flaring.

03 NATURAL GAS↗

‘Best’ Coal-Fired Power Plant and Cogeneration Case Studies

This National Energy Technology Laboratory (NETL) work was prepared for the Asia-Pacific Economic Cooperation (APEC) Energy Working Group. As many economies are planning for a lower carbon future, the use of inefficient coal-fired power generation remains significant in many parts of the world. In 2018, 45% of power generation in APEC economies came from coal. The transition to a lower carbon future can be aided by employing the most advanced available technologies in existing and future coal-fired power plants. Higher efficiency translates to lower emissions per unit of power produced and also means less carbon to capture once CO 2 capture technologies are fully commercial and widely deployed. In addition to reducing carbon emissions, the most advanced coal plants also have extremely low emissions of other pollutants like sulfur dioxide, nitrogen oxides, mercury and particulate matter. Some of these advanced plants also address regional water constraints by minimizing the use of fresh water.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗