Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Effects of Confinement and Pressure on Vibrational Behavior of Nano-confined Propane

Fluids confined in nanopores exhibit significant deviations in their structure and dynamics from the bulk behavior. Although phase, structural and diffusive behaviors of confined fluids have been investigated and reported extensively, confinement effects on the vibrational properties are less understood. Here, we study the vibrational behavior of propane confined in 1.5 nm nanopores of MCM-41-S using inelastic neutron scattering (INS) and molecular dynamics (MD) simulations. Vibrational spectra have been obtained from INS data as functions of temperature and pressure. At ambient pressure, a strong quasielastic signal observed in the INS spectrum at 80 K suggests that confined propane remains liquid below the bulk phase melting point of 85 K. The quasielastic signal is heavily suppressed when either the pressure is increased to 1 kbar, or the temperature is lowered to 30 K, indicating solidification of pore-confined propane. Confinement in MCM-41-S pores results in a glass-like state of propane that exhibits a relatively featureless low-energy vibrational spectrum compared to the bulk crystalline propane. Increasing the pressure to 3 kbar results in hardening of the intermolecular and methyl torsional modes. The INS data are used for estimating the isochoric specific heat of confined propane, which is compared with the specific heat of bulk propane reported in literature. Data from MD simulations is used to calculate the vibrational power spectra that agree qualitatively with the experimental data. Simulation data also suggests a reduction in the structural ordering (positional, orientational and intramolecular) of propane under confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study of high-k turbulence during an energy confinement degradation phase in EAST ohmic plasmas

In this paper, we present experimental studies of both high-k(r) ( cm(-1), and , respectively; ) and high- ( cm(-1), and , respectively; ) turbulence behavior during an ohmic energy confinement degradation phase in experimental advanced superconducting tokamak (EAST). High-k(r) turbulence from density fluctuation at and high- turbulence from density fluctuation at -0.97 were measured by tangential and poloidal CO2 laser collective scattering diagnostics, respectively. Note that k(r), , and are radial wavenumber, poloidal wavenumber, perpendicular wavenumber and ion gyroradius at electron temperature, respectively. Both high-k(r)/ turbulence power and energy confinement time are found to be temporally correlated to line-averaged electron density n(e) in the plasma current flat-top phase (I-p = 0.4 MA): when the n(e) shows continuous increase/decrease, the high-k(r)/ turbulence power increases/decreases correspondingly and the shows corresponding decrease/increase; the stable n(e) is related to stable both and high-k(r)/ turbulence power. Statistical results of high-k(r)/ turbulence power versus further imply that high-k(r)/ turbulence shows a strong correlation with plasma energy confinement degradation in high line-averaged n(e) condition, but high-k(r) and high- turbulence have relatively weak and no dependence on the transition between linear range in low-n(e) condition and energy confinement degradation in the high-n(e) condition, respectively. Moreover, profiles of electron temperature T-e and n(e) as well as their normalized gradients in a part of high- density fluctuation measurement region also have been given to qualitatively explain the enhancement of turbulence power with the increase of line-averaged n(e).

EAST tokamak↗

Confinement time and ambipolar potential in a relativistic mirror-confined plasma

Advanced aneutronic fusion fuels such as proton-Boron 11 tend to require much higher temperatures than conventional fuels like deuterium–tritium. For electrons, the bulk plasma temperature can approach a substantial fraction of the rest mass. In a mirror confinement system, where the electrons are confined by an ambipolar potential of at least five electron temperatures, the tail electrons which can escape the potential are fully relativistic, which must be taken into account in calculating their confinement. In this paper, simple estimates are employed to extend the scaling of the confinement time into the relativistic regime. By asymptotically matching this scaling to known solutions in the non-relativistic limit, accurate forms for the confinement time (and thus, the ambipolar potential) are obtained. Furthermore, these forms are verified using finite-element-based Fokker–Planck simulations over a wide range of parameters. Comparing relativistic and nonrelativistic mirror-confined plasmas with the same ratio of confining potential |eΦ| to electron temperature T e and the same mirror ratio R, the net result is a decrease in the confinement time due to relativistic effects by a factor of S ≡ (1 + 15T e /8m e c 2 )/(1 + 2|eΦ|/m e c 2 )⁠.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Can We Describe Graphene Confined Water Structures as Overlapping of Approaching Graphene–Water Interfacial Structures?

We investigate the microscopic mechanisms of the overlap of interfacial structures in confined fluids and attempt to answer the question whether the confined structures can be predicted from the original density profiles of individual solid–fluid interfaces. For that purpose, we perform (globally) isobaric–isothermal (locally, grand canonical) molecular dynamics simulations to extract not only the axial distribution functions of the water sites for the uncoupled graphene–water interfaces, but also those corresponding to the confined aqueous environments over the interplate range $8 ≤ h (Å) ≤ 28$ typically at ambient conditions. We have tested two (i.e., an arithmetic and a geometric) superposition approximations for the singlet density of confined water between flat graphene plates, as well as for a combination of flat and corrugated graphene plates. The outcome of this study suggests that the answer to the title’s question is a “yes”, provided that the interplate distance h is large enough to avoid fluid geometric packing frustration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear gyrokinetic simulations of the I-mode high confinement regime and comparisons with experiment

For the first time, nonlinear gyrokinetic simulations of I-mode plasmas are performed and compared with experiment. I-mode is a high confinement regime, featuring energy confinement similar to H-mode, but without enhanced particle and impurity particle confinement [D. G. Whyte et al., Nucl. Fusion 50, 105005 (2010)]. As a consequence of the separation between heat and particle transport, I-mode exhibits several favorable characteristics compared to H-mode. The nonlinear gyrokinetic code GYRO [J. Candy and R. E. Waltz, J Comput. Phys. 186, 545 (2003)] is used to explore the effects of E × B shear and profile stiffness in I-mode and compare with L-mode. The nonlinear GYRO simulations show that I-mode core ion temperature and electron temperature profiles are more stiff than L-mode core plasmas. Scans of the input E × B shear in GYRO simulations show that E × B shearing of turbulence is a stronger effect in the core of I-mode than L-mode. The nonlinear simulations match the observed reductions in long wavelength density fluctuation levels across the L-I transition but underestimate the reduction of long wavelength electron temperature fluctuation levels. The comparisons between experiment and gyrokinetic simulations for I-mode suggest that increased E × B shearing of turbulence combined with increased profile stiffness are responsible for the reductions in core turbulence observed in the experiment, and that I-mode resembles H-mode plasmas more than L-mode plasmas with regards to marginal stability and temperature profile stiffness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Hydrogeologic Character of the Lower Tuff Confining Unit and the Oak Springs Butte Confining Unit in the Tuff Pile Area of Central Yucca Flat

The lower tuff confining unit (LTCU) in the Yucca Flat Corrective Action Unit (CAU) consists of a monotonous sequence of pervasively zeolitized volcanic tuff (i.e., mostly bedded with lesser nonwelded to poorly welded tuff; not fractured) (Bechtel Nevada, 2006). The LTCU is an important confining unit beneath Yucca Flat because it separates the alluvial and volcanic aquifers, where many underground nuclear tests were conducted, from the regional lower carbonate aquifer. Recent sub-CAU-scale modeling by Los Alamos National Laboratory in the Tuff Pile area of Yucca Flat (Boryta, et al., in review) includes postulated low-porosity, high-permeability zones (i.e., fractured welded-tuff aquifers) within the LTCU. This scenario indicates that such postulated low-porosity, high-permeability zones could provide fast-path lateral conduits to faults, and eventually to the lower carbonate aquifer. A fractured and faulted lower carbonate aquifer is postulated to provide a flow path(s) for underground test-derived contaminants to potential offsite receptors. The ramifications of such a scenario are obvious for groundwater flow and contaminant migration beneath Yucca Flat. This paper describes the reasoning for not including postulated low-porosity, high-permeability zones within the LTCU in the Tuff Pile area or within the LTCU in the Yucca Flat CAU-scale model. Both observational and analytical data clearly indicate that the LTCU in the Tuff Pile area consists of pervasively zeolitic, nonwelded to poorly welded tuffs that are classified as tuff confining units (i.e., high-porosity, low-permeability). The position regarding the LTCU in the Tuff Pile area is summarized as follows: • The LTCU in the Tuff Pile area consists of a monotonous sequence of predominantly zeolitic nonwelded to poorly welded tuffs, and thus is accurately characterized hydrogeologically as a tuff confining unit (aquitard) in the Yucca Flat-Climax Mine hydrostratigraphic framework model (Bechtel Nevada, 2006). • No welded-tuff (or lava-flow aquifers), referred to as low-porosity, high-permeability zones in Boryta et al. (in review), are present within the LTCU in the Tuff Pile area. • Fractures within the LTCU are poorly developed, a characteristic of zeolitic tuffs; and fracture distributions are independent of stratigraphic and lithologic units (Prothro, 2008). • Groundwater flow and radionuclide transport will not be affected by laterally extensive zones of significantly higher permeability within the LTCU in the Tuff Pile area. Although not the primary focus of this report, the hydrogeologic character of the Oak Spring Butte confining unit (OSBCU), located directly below the LTCU, is also discussed. The OSBCU is lithologically more diverse, and does include nonwelded to partially welded ash-flow tuffs. However, these older ash-flow tuffs are poorly welded and altered (zeolitic to quartzofeldspathic), and consequently, would tend to have properties similar to a tuff confining unit rather than a welded-tuff aquifer.

54 ENVIRONMENTAL SCIENCES↗

Confinement and Processing Can Alter the Morphology and Periodicity of Bottlebrush Block Copolymers in Thin Films

Bottlebrush block copolymers (BBCPs) are intriguing architectural variations on linear BCPs with highly tunable structure. Confinement can have a significant impact on polymer assembly, giving rise to changes in morphology, assembly kinetics, and properties like the glass transition. Given that confinement leads to significant changes in the persistence length of bottlebrush homopolymers, it is reasonable to expect that BBCPs will see significant changes in their structure and periodicity relative to the bulk morphology. Understanding how confinement influences assembly will be important for designing BBCPs for thin film applications including membranes, integrated photonic structures, and potentially BCP lithography. In this work, in order to study the effects of confinement on BBCP conformation and morphology, a blade coating was used to prepare films with continuous variation in film thickness. Unlike thin films of linear BCPs, islands/holes were not observed, and instead mixtures of parallel and perpendicular morphologies emerge after annealing. The lamellar periodicity ($L_0$) of the morphologies is found to be thickness dependent, increasing $L_0$ with decreasing film thickness for blade coated films. Films coated out of tetrahydrofuran (THF) resulted in a single well-defined lamellar periodicity, verified through atomic force microscopy (AFM) and grazing incidence small-angle X-ray scattering (GISAXS), which increases dramatically from the bulk value (30.6 nm) and continues to increase as the film thickness decreases. The largest observed $L_0$ was 65.5 nm, and this closely approaches the estimated upper limit of 67 nm corresponding to a fully extended backbone in a bilayer arrangement. Films coated out of propylene glycol methyl ether acetate (PGMEA) resulted in a mixture of perpendicular lamellae and a smaller, likely cylindrical morphology. The lamellar portion of the film shows the same thickness dependence as the lamellae observed in the THF coated films. The scaling of the lamellar $L_0$ with respect to film thickness follows predictions for confined semiflexible polymers with weak excluded volume interactions and can be related to models for confinement of DNA. Spin coated films shows the same reduction in periodicity, although at very different film thicknesses. This result suggests that the material has shallow free-energy barriers to transitioning between different $L_0$ and morphologies, a property that could be taken advantage of for patterning diverse structures with a single material.

36 MATERIALS SCIENCE↗

Ultrafast Photoluminescence in Quantum-Confined Silicon Nanocrystals Arises from an Amorphous Surface Layer

Here, we examine ultrafast photoluminescence produced from plasma-grown, colloidal silicon nanocrystals as a function of both particle size and lattice crystallinity. In particular, we quantify the decay time and spectral profiles of nominally few-picosecond direct-gap emission previously attributed to phononless electron–hole recombination. We find that the high-energy (400–600 nm, 2–3 eV) photoluminescence component consists of two decay processes with distinct time scales. The fastest photoluminescence exhibits an ~30 ps decay constant largely independent of emission energy and particle size. Importantly, nearly identical temporal components and blue spectral features appear for amorphous particles. We thus associate high-energy, rapid emission with an amorphous component in all measured samples, as supported by Raman analysis and molecular dynamics simulation. Based on these observations, we advise that the observed dynamics proceed too slowly to originate from intraband carrier thermalization and instead suggest a nonradiative origin associated with the amorphous component.

36 MATERIALS SCIENCE↗

Atomistic simulation study of short pulse laser interactions with a metal target under conditions of spatial confinement by a transparent overlayer

The distinct characteristics of short pulse laser interactions with a metal target under conditions of spatial confinement by a solid transparent overlayer are investigated in a series of atomistic simulations. The simulations are performed with a computational model combining classical molecular dynamics (MD) technique with a continuum description of the laser excitation, electron-phonon equilibration, and electronic heat transfer based on two-temperature model (TTM). Two methods for incorporation of the description of a transparent overlayer into the TTM-MD model are designed and parameterized for Ag-silica system. The material response to the laser energy deposition is studied for a range of laser fluences that, in the absence of the transparent overlayer, covers the regimes of melting and resolidification, photomechanical spallation, and phase explosion of the overheated surface region. In contrast to the irradiation in vacuum, the spatial confinement by the overlayer facilitates generation of sustained high-temperature and high-pressure conditions near the metal-overlayer interface, suppresses the generation of unloading tensile wave, decreases the maximum depth of melting, and prevents the spallation and explosive disintegration of the surface region of the metal target. At high laser fluences, when the laser excitation brings the surface region of the metal target to supercritical conditions, the confinement prevents the expansion and phase decomposition characteristic for the vacuum conditions leading to a gradual cooling of the hot compressed supercritical fluid down to the liquid phase and eventual solidification. The target modification in this case is limited to the generation of crystal defects and the detachment of the metal target from the overlayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impurity confinement and transport in high confinement regimes without edge localized modes on DIII-D

Impurity transport in the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] is investigated in stationary high confinement (H-mode) regimes without edge localized modes (ELMs). In plasmas maintained by resonant magnetic perturbation (RMP), ELM-suppression, and QH-mode, the confinement time of fluorine (Z = 9) is equivalent to that in ELMing discharges with 40 Hz ELMs. For selected discharges with impurity injection, the impurity particle confinement time compared to the energy confinement time is in the range of τ{sub p}/τ{sub e}≈2−3. In QH-mode operation, the impurity confinement time is shown to be smaller for intense, coherent magnetic, and density fluctuations of the edge harmonic oscillation than weaker fluctuations. Transport coefficients are derived from the time evolution of the impurity density profile and compared to neoclassical and turbulent transport models NEO and TGLF. Neoclassical transport of fluorine is found to be small compared to the experimental values. In the ELMing and RMP ELM-suppressed plasma, the impurity transport is affected by the presence of tearing modes. For radii larger than the mode radius, the TGLF diffusion coefficient is smaller than the experimental value by a factor of 2–3, while the convective velocity is within error estimates. Low levels of diffusion are observed for radii smaller than the tearing mode radius. In the QH-mode plasma investigated, the TGLF diffusion coefficient is higher inside of ρ=0.4 and lower outside of 0.4 than the experiment, and the TGLF convective velocity is more negative by a factor of approximately 1.7.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermonuclear ignition in inertial confinement fusion and comparison with magnetic confinement

The physics of thermonuclear ignition in inertial confinement fusion (ICF) is presented in the familiar frame of a Lawson-type criterion. The product of the plasma pressure and confinement time Ptau for ICF is cast in terms of measurable parameters and its value is estimated for cryogenic implosions. An overall ignition parameter chi including pressure, confinement time, and temperature is derived to complement the product Ptau. A metric for performance assessment should include both chi and Ptau. The ignition parameter and the product Ptau are compared between inertial and magnetic-confinement fusion. It is found that cryogenic implosions on OMEGA[T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have achieved Ptauapprox1.5 atm s comparable to large tokamaks such as the Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] where Ptauapprox1 atm s. Since OMEGA implosions are relatively cold (Tapprox2 keV), their overall ignition parameter chiapprox0.02-0.03 is approx5x lower than in JET (chiapprox0.13), where the average temperature is about 10 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coexistence of Multilayered Phases of Confined Water: The Importance of Flexible Confining Surfaces

Flexible nanoscale confinement is critical to understanding the role that bending fluctuations play on biological processes where soft interfaces are ubiquitous or to exploit confinement effects in engineered systems where inherently flexible 2D materials are pervasively employed. Here, using molecular dynamics simulations, we compare the phase behavior of water confined between flexible and rigid graphene sheets as a function of the in-plane density, ρ2D. We find that both cases show commensurate mono-, bi-, and trilayered states; however, the water phase in those states and the transitions between them are qualitatively different for the rigid and flexible cases. The rigid systems exhibit discontinuous transitions between an ( n )-layer and an ( n +1)-layer state at particular values of ρ2D, whereas under flexible confinement, the graphene sheets bend to accommodate an ( n )-layer and an (n+1)-layer state coexisting in equilibrium at the same density. We show that the flexible walls introduce a very different sequence of ice phases and their phase coexistence with vapor and liquid phases than that observed with rigid walls. We discuss the applicability of these results to real experimental systems to shed light on the role of flexible confinement and its interplay with commensurability effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Standalone interferometry-based calibration of convex lens-induced confinement microscopy with nanoscale accuracy

Strongly confined environments (confined dimensions between 1–100 nm) represent unique challenges and opportunities for understanding and manipulating molecular behavior due to the significant effects of electric double layers, high surface-area to volume ratios, and other phenomena at the nanoscale. Convex Lens-induced Confinement (CLiC) can be used to analyze the dynamics of individual molecules or particles confined in a planar slit geometry with continuously varying gap thickness. Here, we describe an interferometry-based method for precise measurement of the slit pore geometry. Specifically, this approach permitted accurate characterization of separation distances as small as 5 nm, with 1 nm precision, without a priori knowledge or assumptions about the contact geometry, as well as a greatly simplified experimental setup that required only a lens, coverslip, and inverted microscope. The interferometry-based measurement of gap height offered a distinct advantage over conventional fluorescent dye-based methods; e.g., accurate interferometric height measurements were made at low gap heights regardless of solution conditions, while the concentration of fluorescent dye was significantly impacted by solution conditions such as ionic strength or pH. The accuracy of the interferometric measurements was demonstrated by comparing the experimentally measured concentration of a charged fluorescent dye as a function of gap thickness with dye concentration profiles calculated using Debye–Hückel theory. Accurate characterization of nanoscale gap thickness will enable researchers to study a variety of practical and biologically relevant systems within the CLiC geometry.

42 ENGINEERING↗

Application of spatially resolved high resolution crystal spectrometry to inertial confinement fusion plasmas

High resolution ({lambda}/{Delta}{lambda}{approx} 10 000) 1D imaging x-ray spectroscopy using a spherically bent crystal and a 2D hybrid pixel array detector is used world wide for Doppler measurements of ion-temperature and plasma flow-velocity profiles in magnetic confinement fusion plasmas. Meter sized plasmas are diagnosed with cm spatial resolution and 10 ms time resolution. This concept can also be used as a diagnostic of small sources, such as inertial confinement fusion plasmas and targets on x-ray light source beam lines, with spatial resolution of micrometers, as demonstrated by laboratory experiments using a 250-{mu}m {sup 55}Fe source, and by ray-tracing calculations. Throughput calculations agree with measurements, and predict detector counts in the range 10{sup -8}-10{sup -6} times source x-rays, depending on crystal reflectivity and spectrometer geometry. Results of the lab demonstrations, application of the technique to the National Ignition Facility (NIF), and predictions of performance on NIF will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗