Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTROL SIMULATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

A description of the thruster attitude control simulation and its application to the HEAO-C study

During the design and evaluation of a reaction control system (RCS), it is desirable to have a digital computer program simulating vehicle dynamics, disturbance torques, control torques, and RCS logic. The thruster attitude control simulation (TACS) is just such a computer program. The TACS is a relatively sophisticated digital computer program that includes all the major parameters involved in the attitude control of a vehicle using an RCS for control. It includes the effects of gravity gradient torques and HEAO-C aerodynamic torques so that realistic runs can be made in the areas of fuel consumption and engine actuation rates. Also, the program is general enough that any engine configuration and logic scheme can be implemented in a reasonable amount of time. The results of the application of the TACS in the HEAO-C study are included.

Brandon, L. B.↗
NASA NTRS1991

The NASA Lewis integrated propulsion and flight control simulator

A new flight simulation facility was developed at NASA-Lewis. The purpose of this flight simulator is to allow integrated propulsion control and flight control algorithm development and evaluation in real time. As a preliminary check of the simulator facility capabilities and correct integration of its components, the control design and physics models for a short take-off and vertical landing fighter aircraft model were shown, with their associated system integration and architecture, pilot vehicle interfaces, and display symbology. The initial testing and evaluation results show that this fixed based flight simulator can provide real time feedback and display of both airframe and propulsion variables for validation of integrated flight and propulsion control systems. Additionally, through the use of this flight simulator, various control design methodologies and cockpit mechanizations can be tested and evaluated in a real time environment.

Bright, Michelle M.↗
NASA NTRS1967

The Lunar Orbiter attitude control simulator.

Air-bearing facility for Lunar Orbiter attitude control system testing minimizing external disturbances in platform, platform mass deflection and room thermal currents

ATTITUDE CONTROL↗
NASA NTRS1973

Quasi-optimum design of a six degree of freedom moving base simulator control system

The design of a washout control system for a moving base simulator is treated by a quasi-optimum control technique. The broad objective of the design is to reproduce the sensed motion of a six degree of freedom simulator as accurately as possible without causing the simulator excursions to exceed specified limits. A performance criterion is established that weights magnitude and direction errors in specific force and in angular velocity and attempts to maintain the excursion within set limits by penalizing excessive excursions. A FORTRAN routine for relizing the washout law was developed and typical time histories using the washout routine were simulated for a range of parameters in the penalty- and weighting-functions. These time histories and the listing of the routine are included in the report.

Friedland, B.↗
NASA NTRS1974

Analysis and compensation of an aircraft simulator control loading system with compliant linkage

A hydraulic control loading system for aircraft simulation was analyzed to find the causes of undesirable low frequency oscillations and loading effects in the output. The hypothesis of mechanical compliance in the control linkage was substantiated by comparing the behavior of a mathematical model of the system with previously obtained experimental data. A compensation scheme based on the minimum integral of the squared difference between desired and actual output was shown to be effective in reducing the undesirable output effects. The structure of the proposed compensation was computed by use of a dynamic programing algorithm and a linear state space model of the fixed elements in the system.

Johnson, P. R.↗
NASA NTRS2005

Computationally Lightweight Air-Traffic-Control Simulation

An algorithm for computationally lightweight simulation of automated air traffic control (ATC) at a busy airport has been derived. The algorithm is expected to serve as the basis for development of software that would be incorporated into flight-simulator software, the ATC component of which is not yet capable of handling realistic airport loads. Software based on this algorithm could also be incorporated into other computer programs that simulate a variety of scenarios for purposes of training or amusement.

Knight, Russell↗
NASA NTRS1994

A General Mission Independent Simulator (GMIS) and Simulator Control Program (SCP)

GMIS is a general-purpose simulator for testing ground system software. GMIS can be adapted to any mission to simulate changes in the data state maintained by the mission's computers. GMIS was developed in Code 522 NASA Goddard Space Flight Center. The acronym GMIS stands for GOTT Mission Independent Simulator, where GOTT is the Ground Operations Technology Testbed. Within GOTT, GMIS is used to provide simulated data to an installation of TPOCC - the Transportable Payload Operations Control Center. TPOCC was developed by Code 510 as a reusable control center. GOTT uses GMIS and TPOCC to test new technology and new operator procedures.

Baker, Paul L.↗
NASA NTRS2012

Towards Validation of an Adaptive Flight Control Simulation Using Statistical Emulation

Traditional validation of flight control systems is based primarily upon empirical testing. Empirical testing is sufficient for simple systems in which a.) the behavior is approximately linear and b.) humans are in-the-loop and responsible for off-nominal flight regimes. A different possible concept of operation is to use adaptive flight control systems with online learning neural networks (OLNNs) in combination with a human pilot for off-nominal flight behavior (such as when a plane has been damaged). Validating these systems is difficult because the controller is changing during the flight in a nonlinear way, and because the pilot and the control system have the potential to co-adapt in adverse ways traditional empirical methods are unlikely to provide any guarantees in this case. Additionally, the time it takes to find unsafe regions within the flight envelope using empirical testing means that the time between adaptive controller design iterations is large. This paper describes a new concept for validating adaptive control systems using methods based on Bayesian statistics. This validation framework allows the analyst to build nonlinear models with modal behavior, and to have an uncertainty estimate for the difference between the behaviors of the model and system under test.

He, Yuning↗
NASA NTRS1975

A flight simulator control system using electric torque motors

Control systems are required in flight simulators to provide representative stick and rudder pedal characteristics. A system has been developed that uses electric dc torque motors instead of the more common hydraulic actuators. The torque motor system overcomes certain disadvantages of hydraulic systems, such as high cost, high power consumption, noise, oil leaks, and safety problems. A description of the torque motor system is presented, including both electrical and mechanical design as well as performance characteristics. The system develops forces sufficiently high for most simulations, and is physically small and light enough to be used in most motion-base cockpits.

Musick, R. O.↗
NASA NTRS1989

Experiments with the KITE attitude control simulator

Simulation experiments are conducted to test an attitude control technique for tethered satellites using the tether tension force to generate control torques by moving the tether attach point relative to the satellite center of mass. A scaled, one-dimensional, air-bearing supported laboratory simulation of the Kinetic Isolation Tether Experiment shows that the attitude of the simulator can be regulated to within 0.75 arcsec with a bandwidth of about 0.1 Hz. The control design includes a state estimator to calculate the vehicle mass center and to calculate the effect of the stepper motor dynamics on the state estimate. Results are presented from closed-loop attitude control experiments to verify the attitude control technique.

Powell, J. David↗
NASA NTRS2004

An Environment for Hardware-in-the-Loop Formation Navigation and Control Simulation

Recent interest in formation flying satellite systems has spurred a considerable amount of research in the relative navigation and control of satellites. Development in this area has included new estimation and control algorithms as well as sensor and actuator development specifically geared toward the relative control problem. This paper describes a simulation facility, the Formation Flying Testbed (FFTB) at NASA's Goddard Space Flight Center, which allows engineers to test new algorithms for the formation flying problem with relevant GN&C hardware in a closed loop simulation. The FFTB currently supports the injection of GPS receiver hardware into the simulation loop, and support for satellite crosslink ranging technology is at a prototype stage. This closed-loop, hardware inclusive simulation capability permits testing of navigation and control software in the presence of the actual hardware with which the algorithms must interact. This capability provides the navigation or control developer with a perspective on how the algorithms perform as part of the closed-loop system. In this paper, the overall design and evolution of the FFTB are presented. Each component of the FFTB is then described in detail. Interfaces between the components of the FFTB are shown and the interfaces to and between navigation and control software are described in detail. Finally, an example of closed-loop formation control with GPS receivers in the loop is presented and results are analyzed.

Burns, Rich↗
NASA NTRS1984

POPCORN: a Supervisory Control Simulation for Workload and Performance Research

A multi-task simulation of a semi-automatic supervisory control system was developed to provide an environment in which training, operator strategy development, failure detection and resolution, levels of automation, and operator workload can be investigated. The goal was to develop a well-defined, but realistically complex, task that would lend itself to model-based analysis. The name of the task (POPCORN) reflects the visual display that depicts different task elements milling around waiting to be released and pop out to be performed. The operator's task was to complete each of 100 task elements that ere represented by different symbols, by selecting a target task and entering the desired a command. The simulated automatic system then completed the selected function automatically. Highly significant differences in performance, strategy, and rated workload were found as a function of all experimental manipulations (except reward/penalty).

Hart, S. G.↗
NASA NTRS1986

Four-Cylinder Stirling Engine Control Simulation

Four-cylinder, Stirling-engine, transient-engine-simulation computer program developed. Program intended for control analysis. Associated engine model simplified to shorten computer calculation time. Model includes engine mechanical-drive dynamics and vehicle-load effects. Computer program also includes subroutines that allow acceleration of engine by addition of hydrogen to system and braking of engine by short circuiting of working spaces.

Daniele, C. J.↗
DOE OSTI2026

Multibody for Everybody (M4E): A Symbolic Dynamics Modeling Tool with Applications in Simulation, Control, and Optimization

Developing the analytical model of a multibody system is often the initial step in control and optimization. The analytical model (equations of motion) describes a system’s time evolution under specified forcing conditions. Although developing these equations is easy for simple systems, this process becomes more complex for systems composed of multiple bodies. Deriving equations of motion for complex multibody systems requires specialized expertise in multibody dynamics, is time-consuming, and is susceptible to error. To address this issue, this paper presents an open-source, easy-to-use, systematic framework to derive symbolic equations of motion in both Python and MATLAB using the joint coordinate formulation. This formulation results in a set of ordinary differential equations that use the minimum set of coordinates needed to model a system. The symbolic representation provides better insight into the influence of design parameters on system performance, facilitates sensitivity analysis and parameter studies, and supports direct implementation of control and optimization routines. The tool enables numerical simulation for specified parameter sets, is modular for straightforward integration with other tools and libraries, and allows incorporation of hydrodynamics, mooring, and other external forces. The result is a reproducible, extensible pipeline for modeling, simulation, and design of complex multibody systems. The proposed tool is versatile and can be applied to domains such as robotics, control, and design. In addition, we integrated external libraries that provide capabilities for modeling offshore systems such as underwater robots and marine energy converters.

16 TIDAL AND WAVE POWER↗
NASA NTRS1991

The NASA Lewis integrated propulsion and flight control simulator

A new flight simulation facility has been developed at NASA Lewis to allow integrated propulsion-control and flight-control algorithm development and evaluation in real time. As a preliminary check of the simulator facility and the correct integration of its components, the control design and physics models for an STOVL fighter aircraft model have been demonstrated, with their associated system integration and architecture, pilot vehicle interfaces, and display symbology. The results show that this fixed-based flight simulator can provide real-time feedback and display of both airframe and propulsion variables for validation of integrated systems and testing of control design methodologies and cockpit mechanizations.

Bright, Michelle M.↗
NASA NTRS1980

Temperature control simulation for a microwave transmitter cooling system

The thermal performance of a temperature control system for the antenna microwave transmitter (klystron tube) of the Deep Space Network antenna tracking system is discussed. In particular the mathematical model is presented along with the details of a computer program which is written for the system simulation and the performance parameterization. Analytical expressions are presented.

Yung, C. S.↗
NASA NTRS2008

Successes and Challenges for Flow Control Simulations

A survey is made of recent computations published for synthetic jet flow control cases from a CFD workshop held in 2004. The three workshop cases were originally chosen to represent different aspects of flow control physics: nominally 2-D synthetic jet into quiescent air, 3-D circular synthetic jet into turbulent boundarylayer crossflow, and nominally 2-D flow-control (both steady suction and oscillatory zero-net-mass-flow) for separation control on a simple wall-mounted aerodynamic hump shape. The purpose of this survey is to summarize the progress as related to these workshop cases, particularly noting successes and remaining challenges for computational methods. It is hoped that this summary will also by extension serve as an overview of the state-of-the-art of CFD for these types of flow-controlled flow fields in general.

Rumsey, Christopher L.↗
NASA NTRS2008

Successes and Challenges for Flow Control Simulations

A survey is made of recent computations published for synthetic jet flow control cases from a CFD workshop held in 2004. The three workshop cases were originally chosen to represent different aspects of flow control physics: nominally 2-D synthetic jet into quiescent air, 3-D circular synthetic jet into turbulent boundary-layer crossflow, and nominally 2-D flow-control (both steady suction and oscillatory zero-net-mass-flow) for separation control on a simple wall-mounted aerodynamic hump shape. The purpose of this survey is to summarize the progress as related to these workshop cases, particularly noting successes and remaining challenges for computational methods. It is hoped that this summary will also by extension serve as an overview of the state-of-the-art of CFD for these types of flow-controlled flow fields in general.

Rumsey, Christopher L.↗