Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical Fractionation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Optimizing a chemical cleaning protocol to determine the nickel isotopic composition of ancient seawater from carbonates

Reconstructing the ancient marine cycle of Ni, a trace metal in the oceans essential to enzymes regulating the C, N, and O cycles, would inform how Ni bioavailability shaped early life. The Ni isotopic composition of seawater (δ 60 Ni SW ) through time could provide insight, but this approach requires sedimentary archives that faithfully record δ 60 Ni SW . Carbonates are an often-used record of seawater chemistry, but contaminants could bias the measured δ 60 Ni of bulk sediment. To isolate the true carbonate-bound δ 60 Ni signal, we optimized a chemical cleaning protocol designed to minimize non‑carbonate Ni contributions and maximize carbonate recovery. We analyzed ODP Site 1007 sediments and evaluated oxidative and reductive pre-cleaning steps and carbonate dissolution protocols. Our results show that only reductive cleaning significantly altered the subsequent carbonate leachate composition, lowering Ni/Ca ratios by up to 60% and δ 60 Ni values by as much as 0.4 ‰. In contrast, δ 60 Ni values were largely insensitive to premature carbonate dissolution during pre-cleaning or to partial leaching of silicates during carbonate dissolution, even at higher acid molarities or longer reaction times. We recommend an evidence-based protocol that removes hydro-soluble salts and clays, applies reductive cleaning and oxidative cleaning for certain sample compositions, and dissolves carbonate using 0.5 M acetic acid, adjusted to pH 5. Using these results, we infer a ∼ 0.9 ‰ Ni isotopic fractionation between chemically cleaned deep-water carbonates (+0.4 ± 0.1 ‰) and deep seawater. This method development is a key step toward accurately reconstructing ancient marine Ni cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reaction‐induced morphology control in block copolymers

Abstract Controlling the self‐assembly behaviors of block copolymers (BCPs) is a focal point of many research thrusts due to their broad use in various applications. While BCP molecular weight, volume fraction, and chemical identities are key thermodynamic parameters to determine their morphology, an emergent method in this area is through reaction‐induced changes to the characteristics of a BCP in situ , which provides access to multiple morphologies and domain sizes from a single parent polymer, as well as enabling the formation of metastable morphologies which may be difficult to attain otherwise. This work provides a focused review about the current state of reaction‐induced morphology control in BCPs in both solution and solid states. Furthermore, we provide a forward‐looking perspective on the future opportunities of understanding and employing reaction engineering to manipulate and advance BCP self‐assembly. © 2023 Society of Industrial Chemistry.

Robertson, Mark↗
DOE OSTI2020

Self-Assembled Periodic Nanostructures Using Martensitic Phase Transformations

We describe a novel approach for the rational design and synthesis of self-assembled periodic nanostructures using martensitic phase transformations. We demonstrate this approach in a thin film of perovskite SrSnO 3 with reconfigurable periodic nanostructures consisting of regularly spaced regions of sharply contrasted dielectric properties. The films can be designed to have different periodicities and relative phase fractions via chemical doping or strain engineering. The dielectric contrast within a single film can be tuned using temperature and laser wavelength, effectively creating a variable photonic crystal. Our results show the realistic possibility of designing large-area self-assembled periodic structures using martensitic phase transformations with the potential of implementing "built-to-order" nanostructures for tailored optoelectronic functionalities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Thermal conductivity of multilayer polymer-nanocomposite thin films

The development of electrical insulators that are thermally conducting is critical for thermal management applications in many advanced electronics and electrical devices. Here, we synthesized polymer nanocomposite (PNC) films composed of polymers [polyethylenimine, poly(vinylamine), poly(acrylic acid), and poly(ethylene oxide)] and dielectric fillers (montmorillonite clay and hexagonal boron nitride) by layer-by-layer technique. The cross-plane thermal conductivity (k⊥) of the film was measured by the 3ω method. The effect of various factors such as film growth, filler type, filler volume fraction, polymer chemical structures, and temperature on the thermal conductivity is reported. The k⊥ of PNCs with thickness from 37 nm to 1.34 μm was found to be in the range of 0.11 to 0.21 ± 0.02 W m−1 K−1. The k⊥ values were found to be lower than the constituent polymer matrix. The experimental result is compared with existing theoretical models of nanocomposite systems to get insight into heat transfer behavior in such layered films composed of dielectrics and polymers.

Physics↗
DOE OSTI2025

Systematic characterization of unknown compounds via dimensionality reduction of time series

Analysis of ambient aerosols provides valuable insight into particle sources and formation chemistry. However, due to the complexity of atmospheric data and the dynamic nature of aerosol composition, a substantial fraction of data often become discarded by conventional analysis methods. Furthermore, a large fraction of chemical species within those data are unidentifiable due to a lack of matching spectral information, resulting in suboptimal characterization of chemical composition. Previous work has demonstrated techniques for cataloging analytes in a chromatographic dataset by deconvolution of mass spectra, but integration of these analytes throughout a large dataset remains time consuming. Here, we present a method to automatically identify an ion for quantitation for single-ion chromatogram based peak fitting and integration, enabling comprehensive integration of analytes with minimal user interaction. The resulting time series are clustered with a machine-learning based dimensionality reduction technique to systematically investigate the underlying characteristics of the categorized analytes and gain new insights into the chemical composition and physicochemical properties of the unidentifiable analytes. We apply these methods to existing atmospheric datasets collected in Manacapuru, Brazil during the GoAmazon2014/5 campaign to identify new analytes and interpret their variability and transformations in the atmosphere. The analysis results generate 408 time series from cataloged analytes of interest, and the clustering of those time series with spherical k-means results in 8 distinct clusters. We find the analytes form clusters based on their distinct physicochemical properties, demonstrating the method’s ability to systematically identify and selectively filter contaminants and instrumental analytes and characterize the unidentifiable analytes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An acidic polysaccharide (AGC3) isolated from North American ginseng ( Panax quinquefolius ) suspension culture as a potential immunomodulatory nutraceutical

Polysaccharides isolated from Panax quinquefolius roots are widely used as nutraceuticals due to their immunomodulatory properties. Despite their popularity, several challenges exist in isolating ginseng root polysaccharides such as batch-to-batch structural inconsistencies and bacterial endotoxin contamination. A plant tissue culture-based platform offers a potential solution to isolate natural polysaccharide fractions with consistent chemical characteristics and reduced endotoxin content. In this study, an acidic polysaccharide fraction (AGC3) with immunomodulatory properties was isolated from Panax quinquefolius suspension cultures. The heterogeneous fraction (molecular weight: 4.81 and 32.14 kDa), purified by anion exchange chromatography, was predominantly composed of galactose (>60%) along with the presence of rhamnose, arabinose, glucose, glucuronic acid and galacturonic acid. The major glycosidic linkages were found to be t-Galp (47.7%), 4-Galp (15.6%), 2,4-Rhap (8.1%), 6-Galp (8.1%) and 4-GalAp (6.8%). Structural analyses indicated the presence of a pectic rhamnogalacturonan I polysaccharide in AGC3. AGC3 significantly (p < 0.05) stimulated RAW 264.7 murine macrophage cells and primary murine splenocytes by enhancing the production of several immunomodulatory mediators such as IL-6, TNF-α, GM-CSF and MCP-1. The results also indicated the putative roles of NF-κB (p65/RelA) and MAPK (p38) signaling pathways in the immunostimulatory response. Additionally, AGC3 induced murine splenocyte proliferation, another major indicator of immunostimulation. Overall, AGC3 has the potential to be used as an immunostimulatory nutraceutical.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Impacts of Biopolymer Structural and Chemical Attributes on the Products Distributions of Pyrolyzed Loblolly Pine

This presentation evaluates the impact that biopolymer structural and chemical attributes of pyrolyzed loblolly pine has on product distributions, with a focus on how how the anatomical fractions lead to chemical variability, and then how this variability impacts conversion. As an example, bark and needles represent extreme compositional fractions, and these result in differences in pyrolysis yield.

biomass↗
DOE OSTI2024

Cycloalkane-rich sustainable aviation fuel production via hydrotreating lignocellulosic biomass-derived catalytic fast pyrolysis oils

Sustainable aviation fuel (SAF) produced from lignocellulosic biomass is emerging as an ideal alternative to conventional jet fuel for aviation sector decarbonization. Catalytic fast pyrolysis (CFP) can convert lignocellulosic biomass into relatively stable bio-oil that can be selectively transformed to various transportation fuels through hydroprocessing under conditions of different severities. In this contribution, two CFP oils produced from pine-based feedstocks over different types of catalysts (i.e., ZSM-5 and Pt/TiO 2 catalysts) were hydrotreated at 125 bar in a non-isothermal process with a maximum temperature of 385 °C over a sulfided NiMo/Al 2 O 3 catalyst to produce SAF with high cycloalkane concentrations of 89–92 wt%. Cycloalkanes are an important component of jet fuel with advantageous fuel properties, such as high energy density, low sooting, and potential for replacing aromatic hydrocarbons to provide good seal swelling properties. The hydrotreating process successfully converted 91–92% of the biogenic carbon in the CFP oil intermediates to liquid-phase hydrotreated products. Through distillation, 39–40 wt% of the hydrotreated oils were collected in the jet-fuel range as SAF fractions. The rest of the hydrotreated product could be valorized as fuels (e.g., diesel) or chemicals. The SAF fractions with oxygen contents below the detection limit (<0.01 wt%) met ASTM D7566 finished fuel blend and D4054 Tier 1 specifications with respect to density, lower heating value (LHV), volatility, flash point, and freeze point. These results indicate hydrotreating lignocellulosic biomass-derived CFP oil as a promising pathway to produce high-quality SAF rich in cycloalkanes. Continued research is required to increase the SAF yield by process improvements, such as increased CFP oil yields, and an enhanced production of SAF-range molecules via e.g., cracking of high-molecular weight compounds either during CFP or hydrotreating, as well as evaluation of a broader range of jet fuel properties and performance requirements.

09 BIOMASS FUELS↗
DOE OSTI2024

Biomolecular budget of persistent, microbial-derived soil organic carbon: The importance of underexplored pools

The details of how soil microorganisms contribute to stable soil organic carbon pools are a pressing knowledge gap with direct implications for soil health and climate mitigation. It is now recognized that microbial necromass contributes substantially to the formation of stable soil carbon. However, the quantification of necromass in soils has largely been limited to model molecules such as aminosugar biomarkers. The abundance and chemical composition of other persistent microbial residues remain unresolved, particularly concerning how these pools may vary with microbial community structure, soil texture, and management practices. We use yearlong soil incubation experiments with an isotopic tracer to quantify the composition of persistent residues derived from microbial communities inhabiting sand or silt dominated soil with annual (corn) or perennial (switchgrass) monocultures. Persistent microbial residues were recovered in diverse soil biomolecular pools including metabolites, proteins, lipids, and mineral-associated organic matter (MAOM). The relative abundances of microbial contributions to necromass pools were consistent across cropping systems and soil textures. The greatest residue accumulation was not recovered in MAOM but in the light density fraction of soil debris that persisted after extraction by chemical fractionation using organic solvents. Necromass abundance was positively correlated with microbial biomass abundance and revealed a possible role of cell wall morphology in enhancing microbial carbon persistence; while gram-negative bacteria accounted for the greatest contribution to microbial-derived carbon by mass at one year, residues from gram-positive Actinobacteria and Firmicutes showed greater durability. Together these results offer a quantitative assessment of the relative importance of diverse molecular classes for generating durable soil carbon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Separation of High Purity Oxygenated Aromatics from Catalytic Fast Pyrolysis Organic Streams

Thermochemical conversion of lignocellulosic biomass offers an attractive route to produce fuels and chemicals. Specifically, catalytic fast pyrolysis (CFP) oils have been shown to contain a high concentration of oxygenated aromatics, which can be isolated as value-added co-products. Purification of oxygenated aromatics can be a viable pathway to more economically competitive biorefineries, yet the isolation of highly pure coproduct streams remains technically challenging due to the high chemical heterogeneity of thermochemical process steams. Here, we demonstrate an industrially scalable process for isolating phenol, a widely used precursor to plastics, from CFP oil. Importantly, we leverage standard industrial processes, such as distillation, liquid-liquid extraction, and crystallization, to achieve phenol with 97% purity. In addition, the primary distillation of the CFP oil yielded several other fractions that contain chemicals with the potential to be isolated (e.g. cyclic ketones, cresols, and guaiacols). This work provides a technically feasible path to high purity oxygenated aromatics that has the potential to offset fuel production costs in a biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2024

Biomass Attributes and Attribute Modifications Affecting Systems and Methods to Separate and Fractionate. In: Handbook of Biorefinery Research and Technology

Chemical and physical heterogeneity in biomass feedstocks such as agricultural or forestry residues is due to substantial differences in plant tissue types. These differences can contribute significant challenges to handling, preprocessing, and conversion in biorefining processes. An understanding of this chemical and physical heterogeneity can be used to inform fractionation technologies that could facilitate more streamlined processing and potentially be employed to yield multiple co-product streams for a single feedstock. In this chapter, the motivation and scope of biomass fractionation is first outlined. Physical and chemical properties of biomass feedstocks, along with their distribution and diversity within plants is next discussed with respect to how these differences can be exploited in a fractionation process. A summary of some of the key physical principles that allow for fractionation is next covered along with how these physical principles are exploited in equipment designs. Examples from the literature are briefly discussed that highlight how these approaches can be employed to achieve processing objectives. Several case studies on physical fractionation of corn stover and forestry residues are presented that illustrate how integrated fractionation processes could be employed. Finally, prospects and potential economic drivers for adoption of biomass fractionation technologies are discussed.

Biomass chemical properties↗
DOE OSTI2020

Ternary Phase Diagram of Water/Bio-Oil/Organic Solvent for Bio-Oil Fractionation

Separating bio-oil by fractionation with different chemical composition is a critical step to refine these oils and obtain high value products. Cold-water precipitation of pyrolytic lignin from bio-oil is the most common approach used. However, the obtained aqueous phase from this method still contain phenols, is diluted and difficult to use. In this study, the use of liquid-liquid extraction with different solvents (1-butanol, ethyl acetate, 1-octanol, dichloromethane, toluene, and hexane) for the separation of targeted molecules (lignin oligomers, sugars, acetic acid) is explored. Ternary phase diagrams for the organic solvent/water/bio-oil are reported. The partition coefficient of compounds of interest (both light and heavy fraction) is reported for the liquid-liquid equilibrium zone. When using butanol as solvent, the highest separation factor of total phenols over total sugars was observed. Furthermore, our results provide information to design L-L separation units with the capacity to selectively recover targeted molecules from pyrolysis oils.

09 BIOMASS FUELS↗
DOE OSTI2020

Tailoring Charge Transport and Magnetism in Complex Half-Heusler/Full-Heusler Nanocomposites (Final Report)

This project exploits (1) the facile co-crystallization of the half-Heusler (HH) and full-Heusler (FH) structures, (2) the high coherency and stability of the HH/FH interfaces, and (3) the solid-state inter-conversion between HH and FH structures through local atomic diffusion, to investigate, for selected compositions of the HH and FH phases, the effect of size, dimensionality, dispersion and volume fraction of FH nanostructures on the electronic, phonon and magnetic behavior of the resulting HH/FH nanocomposites. Our goal is to identify and control key material and growth parameters governing phase formation, microstructural evolution, and to understand the mechanism by which these changes of the internal structure modify the material’s performance. To elucidate the mechanism by which the FH nanostructures regulate electronic charge transport and induce ferromagnetism within non-magnetic and magnetic semiconducting HH matrices, suitable series of HH/0D-FH and HH/2D-FH nanocomposites will be fabricated using synthesis conditions suggested by theoretical calculations of the formation energy and stability of various FH phases (varying M) in HH matrices with known chemical composition. The structure of the HH/FH interfaces (size, chemical composition, volume fraction and dispersion) will be investigated along with the evaluation of the electronic (carrier density, mobility, thermopower, electrical conductivity, effective mass), thermal and magnetic (susceptibility, magnetization etc.) properties of the resulting HH/FH nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Recent Advances for Improving the Accuracy, Transferability, and Efficiency of Reactive Force Fields

Reactive force fields provide an affordable model for simulating chemical reactions at a fraction of the cost of quantum mechanical approaches. However, classically accounting for chemical reactivity often comes at the expense of accuracy and transferability, while computational cost is still large relative to nonreactive force fields. Here, we summarize recent efforts for improving the performance of reactive force fields in these three areas with a focus on the ReaxFF theoretical model. To improve accuracy, we describe recent reformulations of charge equilibration schemes to overcome unphysical long-range charge transfer, new ReaxFF models that account for explicit electrons, and corrections for energy conservation issues of the ReaxFF model. To enhance transferability we also highlight new advances to include explicit treatment of electrons in the ReaxFF and hybrid nonreactive/reactive simulations that make it possible to model charge transfer, redox chemistry, and large systems such as reverse micelles within the framework of a reactive force field. To address the computational cost, we review recent work in extended Lagrangian schemes and matrix preconditioners for accelerating the charge equilibration method component of ReaxFF and improvements in its software performance in LAMMPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Segmental Dynamics and Vitrification in Associating Copolymer Melts: Role of Cluster Formation, Microdomains, and Cross-Linking

A microscopic statistical mechanical theory of the structure, self-assembly, and activated segmental relaxation is employed to study associating copolymer melts with high attractive sticker fractions, local clustering, and disordered microphase ordering. The stickers are dynamically pinned in a manner that does not affect equilibrium structure which mimics the much slower physical bond breaking process or postassembly cross-linking of sticky monomers. Local sticker clustering and microdomain spatial correlations significantly modify the activated relaxation of nonstickers and glass transition temperature, T g . A re-entrant glass-melting feature is predicted as sticker attraction strength is initially increased corresponding to a speed up of segmental relaxation, and hence reduction of T g relative to the cross-linked homopolymer network. A mechanistic analysis reveals three competing effects: a purely kinetic slowing down of nonstickers down due to cross-linking, disordering of the nonsticker local cage and weakening of effective forces they experience due to sticker physical clustering, and a longer range impact of microdomain scale correlations that results in nonmonotonic dynamical effects. At high enough attraction strength, a qualitative change emerges corresponding to a sticker fraction dependent elevation of T g , which eventually surpasses that of the cross-linked homopolymer network. Dynamically, the new physics arises from a complex evolution of the amplitude of the collective elastic field that dresses the large amplitude mobile segment hopping within a coupled local-nonlocal description of the alpha relaxation. Furthermore, the results are qualitatively consistent with recent experiments on associating PDMS and PPG telechelics of fixed sticker fraction but with chemically different end groups of variable attraction strengths. Finally, possible tests using simulation and the influence of material or model specific interaction potentials and other real world complications are discussed.

Copolymers↗
DOE OSTI2020

Synthesis, Elasticity, and Spin State of an Intermediate MgSiO 3 -FeAlO 3 Bridgmanite: Implications for Iron in Earth's Lower Mantle

Fe-Al-bearing bridgmanite may be the dominant host for ferric iron in Earth's lower mantle. Here we report the synthesis of (Mg 0.5 Fe 3+ 0.5 )(Al 0.5 Si 0.5 )O 3 bridgmanite (FA50) with the highest Fe 3+ -Al 3+ coupled substitution known to date. X-ray diffraction measurements showed that at ambient conditions, the FA50 adopted the LiNbO 3 structure. Upon compression at room temperature to 18 GPa, it transformed back into the bridgmanite structure, which remained stable up to 102 GPa and 2,600 K. Fitting Birch-Murnaghan equation of state of FA50 bridgmanite yields V 0 = 172.1(4) Å 3 , K 0 = 229(4) GPa with K 0 ' = 4(fixed). Furthermore, the calculated bulk sound velocity of the FA50 bridgmanite is ~7.7% lower than MgSiO 3 bridgmanite, mainly because the presence of ferric iron increases the unit-cell mass by 15.5%. This difference likely represents the upper limit of sound velocity anomaly introduced by Fe 3+ -Al 3+ substitution. X-ray emission and synchrotron Mössbauer spectroscopy measurements showed that after laser annealing, ~6% of Fe 3+ cations exchanged with Al 3+ and underwent the high- to low-spin transition at 59 GPa. The low-spin proportion of Fe 3+ increased gradually with pressure and reached 17–31% at 80 GPa. Since the cation exchange and spin transition in this Fe 3+ -Al 3+ -enriched bridgmanite do not cause resolvable unit-cell volume reduction, and the increase of low-spin Fe 3+ fraction with pressure occurs gradually, the spin transition would not produce a distinct seismic signature in the lower mantle. However, it may influence iron partitioning and isotopic fractionation, thus introducing chemical heterogeneity in the lower mantle.

58 GEOSCIENCES↗