Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A simple parcel method for prediction of cumulus onset and area-averaged cloud amount over heterogeneous land surfaces

A set of PBL data selected from the Wangara experiment is used to examine the relationship between cumulus amount and the calculated relative humidity of rising parcels. The Wilde et al. (1985) method is compared to two explicit parcel methods. It is shown that predictions using parcel methods, in which surface air is lifted to its equilibrium level while being diluted by a defined amount of mixed layer air, are superior for cloud amount, especially during periods of rapid cloud onset when the mean boundary layer top is swiftly rising through a near-neutral layer. Pending independent verification, it appears that an rms error in instantaneous cloud amount of + or - 10 percent may be achievable.

Wetzel, Peter J.↗
NASA NTRS1986

Analysis of spatial inhomogeneities in cumulus clouds using high spatial resolution Landsat data

Aircraft observations and high resolution Landsat MSS digital data are used to determine the sizes of spatial inhomogeneities ('holes') in cumulus clouds. The majority of holes are found near cloud edges, but the larger holes tend to be found in cloud interiors. Aircraft measurements show these cloud spatial inhomogeneities in the range of 100 to 500 m, while Landsat data show them in the range of 100 m to 3 km. The number of holes per cloud decreases exponentially with increasing hole diameter. Small clouds not only have smaller holes, but also fewer holes than large clouds. Large clouds have large holes in them, as well as large numbers of the smaller holes. The total cloud area occupied by holes increases with increasing cloud size.

Parker, Lindsay↗
NASA NTRS1990

On cloud altitude determinations from High Resolution Interferometer Sounder (HIS) observations

High Spectral Resolution Interferometer Spectrometer (HIS) data are used with simultaneous airborne lidar data to investigate the accuracy of cloud height determinations using the 'COz slicing method'. It is shown that the accuracy of cirrus cloud heights are greatly improved as the spectral resolution and coverage is increased. Since next generation infrared temperature and moisture sounders will yield high spectral resolution with quasicontinuous spectral coverage, improved cloud height accuracies achieved from these sensors will improve soundings in clouded areas and will also improve our global cloud climatology.

Smith, William L.↗
NASA NTRS1991

Application of lightning data to satellite-based rainfall estimation

Information on lightning may improve rain estimates made from infrared images of a geostationary satellite. We address this proposition through a case from the Cooperative Huntsville Meteorological Experiment (COHMEX). During the afternoon and evening of 13 July 1986 waves of showers and thunderstorms developed over and near the lower Tennessee River Valley. For the shower and thunderstorm region within 200 km of the National Weather Service radar at Nashville, Tennessee, we measure cold-cloud area in a sequence of GOES infrared images covering all but the end of the shower and thunderstorm period. From observations of the NASA/Marshall direction-finding network in this small domain, we also count cloud-to-ground lightning flashes and, from scans of the Nashville radar, we calculate volume rain flux. Using a modified version of the Williams and Houze scheme, over an area within roughly 240 km of the radar (the large domain), we identify and track cold cloud systems. For these systems, over the large domain, we measure area and count flashes; over the small domain, we calculate volume rain flux. For a temperature threshold of 235K, peak cloud area over the small domain lags both peak rain flux and peak flash count by about four hours. At a threshold of 226K, the lag is about two hours. Flashes and flux are matched in phase. Over the large domain, nine storm systems occur. These range in size from 300 to 60,000 km(exp 2); in lifetime, from about 2 1/2 h to 6 h or more. Storm system area lags volume rain flux and flash count; nevertheless, it is linked with these variables. In essential respects the associations were the same when clouds were defined by a threshold of 226K. Tentatively, we conclude that flash counts complement infrared images in providing significant additional information on rain flux.

Martin, David W.↗
NASA NTRS1975

Operational applications of satellite snowcover observations in Rio Grande drainage of Colorado

Various mapping techniques were tried and evaluated. There were many problems encountered such as distinquishing clouds from snow and snow under trees. A partial solution to some of the problems involves ground reconnaissance and low air flights. Snow areas, cloud cover, and total areas were planimetered after transferring imagery by use of zoom transfer scope. These determinations were then compared to areas determined by use of a density slicer. Considerable adjustment is required for these two values to compare. NOAA pictures were also utilized in the evaluation. Forest cover is one of the parameters used in the modeling process. The determination of this percentage is being explored.

Washicheck, J. N.↗
NASA NTRS1989

Fast spectroscopic variations on rapidly-rotating, cool dwarfs. 3: Masses of circumstellar absorbing clouds on AB Doradus

New time-resolved H alpha, Ca II H and K and Mg II h and k spectra of the rapidly-rotating K0 dwarf star AB Doradus (= HD 36705). The transient absorption features seen in the H alpha line are also present in the Ca II and Mg II resonance lines. New techniques are developed for measuring the average strength of the line absorption along lines of sight intersecting the cloud. These techniques also give a measure of the projected cloud area. The strength of the resonance line absorption provides useful new constraints on the column densities, projected surface areas, temperatures and internal turbulent velocity dispersions of the circumstellar clouds producing the absorption features. At any given time the star appears to be surrounded by at least 6 to 10 clouds with masses in the range 2 to 6 x 10(exp 17) g. The clouds appear to have turbulent internal velocity dispersions of order 3 to 20 km/s, comparable with the random velocities of discrete filamentary structures in solar quiescent prominences. Night-to-night changes in the amount of Ca II resonance line absorption can be explained by changes in the amplitude of turbulent motions in the clouds. The corresponding changes in the total energy of the internal motions are of order 10(exp 29) erg per cloud. Changes of this magnitude could easily be activated by the frequent energetic (approximately 10(exp 34) erg) x ray flares seen on this star.

Cameron, A. Collier↗
NASA NTRS1984

Theoretical development of Monte Carlo codes for modeling cumulus cloud fields

Reflected fluxes are calculated for stratocumulus cloud fields as a function of skycover, cloud aspect ratio, and cloud shape. Cloud liquid water volume is held invariant as cloud shape is varied so that the results can be utilized more effectively by general circulation models and climate models. On the basis of required accuracy in the Earth Radiation Budget Experiment program, an order of magnitude value of 10 W/sq m is used to estimate significant differences between plane parallel and broken cloudiness. This limit is exceeded for cloud covers between 10% and 90%, indicating that plane paralel calculations are not satisfactory at most values of cloud cover. The choice of cloud shape also leads to large differences in reflected fluxes. These differences are traced to the anisotropic intensity pattern out the cloud sides, to the size and shape of the holes between clouds, and to variations in cloud area as viewed from the solar direction. An empirical relationship for effective cloud cover is given at solar zenith angle of theta = 60 deg. This relationship allows for the relatively accurate (delta F = 10 - 15 W/sq m.) computation of broken cloud field reflected fluxes from plane parallel calculations.

Welch, R. M.↗
NASA NTRS2019

Fusion of Surface Ceilometer Data and Satellite Cloud Retrievals in 2D Mesh Interpolating Model with Clustering

For accurate cloud ceiling information, a data fusion approach is proposed that utilizes satellite data to extend surface station information to much wider areas. Cloud base height (CBH) retrieved from satellite observations provides for much larger spatial coverage and higher resolution. The direct comparison of GOES-16 CBH with surface station ceiling yields a local bias that has to be corrected for in the initial GOES-16 cloud base information. This sparsely sampled bias correction presents an irregular 2D mesh of control points, which is then interpolated by constructing a continuous smooth field using polyharmonic splines. The influence of remote stations is restricted by grouping the control points into clusters depending on an effective distance. This cluster-based approach allows for constructing separate spline surfaces corresponding to physically different clouds. The obtained continuous bias correction function is then applied to the entire GOES-16 pixel level CBH except for areas far away from surface stations in data sparse regions such as offshore. The described method is currently being tested using daytime-only observations over the central and eastern United States. Overall, this approach has potential to provide more accurate, high spatial resolution cloud ceiling information for the aviation community.

Khlopenkov, Konstantin↗
DOE OSTI2023

Let’s Unleash the Network Judgment: A Self-Supervised Approach for Cloud Image Analysis

Accurate cloud type identification and coverage analysis are crucial in understanding the Earth’s radiative budget. Traditional computer vision methods rely on low-level visual features of clouds for estimating cloud coverage or sky conditions. Several handcrafted approaches have been proposed; however, scope for improvement still exists. Newer deep neural networks (DNNs) have demonstrated superior performance for cloud segmentation and categorization. These methods, however, need expert engineering intervention in the preprocessing steps—in the traditional methods—or human assistance in assigning cloud or clear sky labels to a pixel for training DNNs. Such human mediation imposes considerable time and labor costs. We present the application of a new self-supervised learning approach to autonomously extract relevant features from sky images captured by ground-based cameras, for the classification and segmentation of clouds. We evaluate a joint embedding architecture that uses self-knowledge distillation plus regularization. We use two datasets to demonstrate the network’s ability to classify and segment sky images—one with ~85,000 images collected from our ground-based camera and another with 400 labeled images from the WSISEG database. We find that this approach can discriminate full-sky images based on cloud coverage, diurnal variation, and cloud base height. Additionally, it semantically segments the cloud areas without labels. The approach shows competitive performance in all tested tasks, suggesting a new alternative for cloud characterization.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

The effect of spatial resolution upon cloud optical property retrievals. I - Optical thickness

High spectral and spatial resolution Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) imagery is used to study the effects of spatial resolution upon fair weather cumulus cloud optical thickness retrievals. As a preprocessing step, a variation of the Gao and Goetz three-band ratio technique is used to discriminate clouds from the background. The combination of the elimination of cloud shadow pixels and using the first derivative of the histogram allows for accurate cloud edge discrimination. The data are progressively degraded from 20 m to 960 m spatial resolution. The results show that retrieved cloud area increases with decreasing spatial resolution. The results also show that there is a monotonic decrease in retrieved cloud optical thickness with decreasing spatial resolution. It is also demonstrated that the use of a single, monospectral reflectance threshold is inadequate for identifying cloud pixels in fair weather cumulus scenes and presumably in any inhomogeneous cloud field. Cloud edges have a distribution of reflectance thresholds. The incorrect identification of cloud edges significantly impacts the accurate retrieval of cloud optical thickness values.

Feind, Rand E.↗
NASA NTRS1994

Microphysical modeling of cirrus. 2: Sensitivity studies

The one-dimensional cirrus model described in part 1 of this issue has been used to study the sensitivity of simulated cirrus microphysical and radiative properties to poorly known model parameters, poorly understood physical processes, and environmental conditions. Model parameters and physical processes investigated include nucleation rate, mode of nucleation (e.g., homogeneous freezing of aerosols and liquid droplets or heterogeneous deposition), ice crystal shape, and coagulation. These studies suggest that the leading sources of uncertainty in the model are the phase change (liquid-solid) energy barrier and the ice-water surface energy which dominate the homogeneous freezing nucleation rate and the coagulation sticking efficiency at low temperatures which controls the production of large ice crystals (radii greater than 100 mcirons). Environmental conditions considered in sensitivity tests were CN size distribution, vertical wind speed, and cloud height. We found that (unlike stratus clouds) variations in the total number of condensation nuclei (NC) have little effect on cirrus microphysical and radiative properties, since nucleation occurs only on the largest CN at the tail of the size distribution. The total number of ice crystals which nucleate has little or no relationship to the number of CN present and depends primarily on the temperature and the cooling rate. Stronger updrafts (more rapid cooling) generate higher ice number densities, ice water content, cloud optical depth, and net radiative forcing. Increasing the height of the clouds in the model leads to an increase in ice number density, a decrease in effective radius, and a decrease in ice water content. The most prominent effect of increasing cloud height was a rapid increase in the net cloud radiative forcing which can be attributed to the change in cloud temperature as well as change in cloud ice size distributions. It has long been recognized that changes in cloud height or cloud area have the greatest potential for causing feedbacks on climate change. Our results suggest that variations in vertical velocity or cloud microphysical changes associatd with cloud height changes may also be important.

Jensen, Eric J.↗
NASA NTRS1993

Surface areas and porosities of ices used to simulate stratospheric clouds

Surface areas, bulk densities, and porosities of ices formed at 85 or 200 K are measured to study the morphology of the vapor-deposited ices that have been used to simulate ice clouds in the laboratory. Surface areas are measured from the Brunauer, Emmett, and Teller (BET) analysis of absorption isotherms obtained at 72.2 K. Bulk densities and porosities are determined photogrammetrically. Results show that water ice and HNO3-H2O ice films deposited from the vapor at temperatures below 200 K exhibit large BET surface areas and are highly porous. For the ices annealed at temperatures above 200 K, external surface areas calculated from the observed particle sizes agree reasonably well with the BET areas, which indicates that the annealed ices are composed of nonporous particles and that the porosity of these ices is due to interstices among the particles.

Keyser, Leon F.↗
NASA NTRS1991

Fluctuations of high clouds and 500-mb geopotential heights in baroclinic waveguides

The spatial phase relationship between the atmospheric circulation and the bandpass fluctuations in cloudiness are investigated using satellite retrievals of high cloud areas reported by Stowe et al. (1988, 1989) NMC 500-mb geopotential heights in northern extratropics. Results of the analysis suggest that the high-cloud structures of baroclinic waves are less spatially coherent than the internal geopotential-height structures. It is shown that over the North Pacific, small-scale (latitudinal wavenumber 13-18) fluctuations in geopotential play a greater role in forcing high cloudiness than do medium-scale (latitudinal wavenumber 7-12) fluctuations in geopotential.

Charlock, Thomas P.↗
NASA NTRS1976

Infrared thermal mapping of the Martian surface and atmosphere - First results

The Viking infrared thermal mapper measures the thermal emission of the Martian surface and atmosphere and the total reflected sunlight. With the high resolution and dense coverage being achieved, planetwide thermal structure is apparent at large and small scales. The thermal behavior of the best-observed areas, the landing sites, cannot be explained by simple homogeneous models. The data contain clear indications for the relevance of additional factors such as detailed surface texture and the occurrence of clouds. Areas in the polar night have temperatures distinctly lower than the CO2 condensation point at the surface pressure. This observation implies that the annual atmospheric condensation is less than previously assumed and that either thick CO2 clouds exist at the 20-kilometer level or that the polar atmosphere is locally enriched by noncondensable gases.

Kieffer, H. H.↗
NASA NTRS1988

Simulation and diagnosis of water vapor imagery with mesoscale model output

The present simulation of 6.7-micron channel water vapor imagery employs March 6-7, 1982 soundings from the Limited Area Mesoscale Prediction System (LAMPS) mesoscale model as inputs to a radiative transfer scheme. A comparison of model-generated and observed brightness temperatures indicates that LAMPS was able to replicate major features of the VAS imagery, including the pronounced warm, dry development streak and a cold cloud area. The model was not, however, able to resolve such finer-scaled details as the double structure of the development portion of the streak.

Muller, Bradley M.↗
DOE OSTI2025

Can We Rely on Satellite Visible/Infrared Microphysical Retrievals of Boundary Layer Clouds in Partially Cloudy Scenes? Implications for Climate Research

This study addresses the longstanding question of the reliability of gridded visible/infrared satellite cloud properties in partially cloudy scenes. By using in-situ cloud probes and airborne Research Scanning Polarimeter (RSP) observations, we analyze bias changes in satellite retrievals from the Spinning Enhanced Visible Infra-Red Imager (SEVIRI) geostationary sensor during the ORACLES campaign. Biases in cloud optical depth (τ) and droplet effective radius (r e ) modestly change for cloud area fraction greater than 35%. The agreement between SEVIRI and RSP r e substantially improves when the retrievals are averaged after removing pixels with τ < 3.0, yielding biases indistinguishable from overcast scenes. In addition, satellite and RSP show an excellent agreement for closed- and open-cell stratocumulus clouds, showing that the satellite retrievals capture spatial changes of r e , and confirming that satellites can faithfully reproduce real physical features for optically thick and partially cloudy scenes. We demonstrate that a simple methodology can minimize uncertainties in satellite-based climate studies.

Painemal, David [NASA Langley Research Center, Ham↗