Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud effective height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Adiabatic Evolution of Cloud Droplet Spectral Width: A New Look at an Old Problem

Abstract Spectral width of the cloud droplet spectrum is important for radiative properties and drizzle/rain development in warm ice‐free clouds. We use an adiabatic rising parcel model to study activation and diffusional growth of cloud droplets, focusing on the spectral width evolution, and contrasting clean and polluted environments. A comprehensive droplet growth equation is used that includes kinetic, solute, and surface tension effects. We show that those effects have an appreciable impact on the spectral width evolution above the cloud base. Without those effects, the droplet area standard deviation should not change once activation is completed. In contrast, simulation results show that the area standard deviation does increase with height, especially for weak updrafts and polluted environments. Implications of those results for cloud modeling, especially applying conventional bin microphysics, are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Emissions Model Intercomparison Project (Emissions-MIP): quantifying model sensitivity to emission characteristics

Abstract. Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO2 injection, seasonality of SO2 and black carbon (BC) particulate emissions, and the assumed fraction of SO2 emissions that is injected into the atmosphere as particulate phase sulfate (SO4) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO2, SO4, and BC, with a particularly large relative variation for SO2, which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of −0.35 W m−2), SO2 lifetime over Northern Hemisphere land (maximum difference of 0.8 d), surface SO2 concentration (up to 59 % decrease), and surface sulfate concentration (up to 23 % increase). Emitting SO2 at height consistently increased SO2 and SO4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO4 emission fraction are accurately and consistently represented in global models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Corrigendum to “The Emissions Model Intercomparison Project (Emissions-MIP): quantifying model sensitivity to emission characteristics” published in Atmos. Chem. Phys., 23, 14779–14799, 2023

Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO 2 injection, seasonality of SO 2 and black carbon (BC) particulate emissions, and the assumed fraction of SO 2 emissions that is injected into the atmosphere as particulate phase sulfate (SO 4 ) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO 2 , SO 4 , and BC, with a particularly large relative variation for SO 2 , which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO 2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of -0.35?W?m-2), SO2 lifetime over Northern Hemisphere land (maximum difference of 0.8?d), surface SO 2 concentration (up to 59?% decrease), and surface sulfate concentration (up to 23?% increase). Emitting SO 2 at height consistently increased SO 2 and SO 4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO 4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO 4 emission fraction are accurately and consistently represented in global models.

Ahsan, Hamza [Pacific Northwest National Laborator↗
DOE OSTI2020

Impacts of long-range transport of aerosols on marine-boundary-layer clouds in the eastern North Atlantic

Vertical profiles of aerosols are inadequately observed and poorly represented in climate models, contributing to the current large uncertainty associated with aerosol–cloud interactions. The US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) aircraft field campaign near the Azores islands provided ample observations of vertical distributions of aerosol and cloud properties. Here we utilize the in situ aircraft measurements from the ACE-ENA and ground-based remote-sensing data along with an aerosol-aware Weather Research and Forecast (WRF) model to characterize the aerosols due to long-range transport over a remote region and to assess their possible influence on marine-boundary-layer (MBL) clouds. The vertical profiles of aerosol and cloud properties measured via aircraft during the ACE-ENA campaign provide detailed information revealing the physical contact between transported aerosols and MBL clouds. The European Centre for Medium-Range Weather Forecasts Copernicus Atmosphere Monitoring Service (ECMWF-CAMS) aerosol reanalysis data can reproduce the key features of aerosol vertical profiles in the remote region. The cloud-resolving WRF sensitivity experiments with distinctive aerosol profiles suggest that the transported aerosols and MBL cloud interactions (ACIs) require not only aerosol plumes to get close to the marine-boundary-layer top but also large cloud top height variations. Based on those criteria, the observations show that the occurrence of ACIs involving the transport of aerosol over the eastern North Atlantic (ENA) is about 62 % in summer. For the case with noticeable long-range-transport aerosol effects on MBL clouds, the susceptibilities of droplet effective radius and liquid water content are -0.11 and +0.14, respectively. When varying by a similar magnitude, aerosols originating from the boundary layer exert larger microphysical influence on MBL clouds than those entrained from the free troposphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Remote sensing of planetary boundary layer from ground and space: Structure, thermodynamics, and boundary layer clouds

The planetary boundary layer (PBL) is a critical interface between Earth's surface and atmosphere, influencing atmospheric convection, weather patterns, and air quality. Recognized by the 2017 National Academies of Sciences, Engineering, and Medicine Earth Science Decadal Survey as an Incubation Targeted Observable, high-quality and effective observation of the PBL has become a priority. This paper reviews surface-based and satellite remote sensing techniques for characterizing PBL features, including PBL height (PBLH), boundary layer thermodynamics, turbulence, and boundary layer clouds (BLCs). These elements are treated as interconnected aspects of the PBL system, while recognizing that different instruments retrieve different physical manifestations of the PBL. The review summarizes recent advances and limitations in Micro-Pulse Lidar (MPL), Doppler lidar, Raman lidar, Differential Absorption Lidar (DIAL), ceilometers, wind profilers, GNSS Radio Occultation, radar, and hyperspectral sounders. These observations help trace dynamic processes within the PBL and link PBL structure to broader weather and climate processes. The review also highlights persistent observational gaps over oceans, remote land, and polar regions, where continuous surface-based profiling is sparse. By comparing instrument capabilities, practical limitations, and interpretation issues, this review emphasizes the need for integrated remote sensing approaches and careful definition of the retrieved PBL quantities.

Boundary layer clouds↗
DOE OSTI2023

Increased importance of aerosol–cloud interactions for surface PM 2.5 pollution relative to aerosol–radiation interactions in China with the anthropogenic emission reductions

Surface fine particulate matter (PM 2.5 ) pollution can be enhanced by feedback processes induced by aerosol–radiation interactions (ARIs) and aerosol–cloud interactions (ACIs). Many previous studies have reported enhanced PM 2.5 concentrations induced by ARIs and ACIs for episodic events in China. However, few studies have examined the changes in the ARI- and ACI-induced PM 2.5 enhancements over a long period, though the anthropogenic emissions have changed substantially in the last decade. In this study, we quantify the ARI- and ACI-induced PM 2.5 changes for 2013–2021 under different meteorology and emission scenarios using the Weather Research and Forecasting model with Chemistry (WRF-Chem), and we investigate the driving factors behind the changes. Our results show that, in January 2013, when China suffered from the worst PM 2.5 pollution, the PM 2.5 enhancement induced by ARIs in eastern China (5.59 µg m −3 ) was larger than that induced by ACIs (3.96 µg m −3 ). However, the ACI-induced PM 2.5 enhancement showed a significantly smaller decrease ratio (51 %) than the ARI-induced enhancement (75 %) for 2013–2021, making ACIs more important for enhancing PM 2.5 concentrations in January 2021. Our analyses suggest that the anthropogenic emission reductions played a key role in this shift. Owing to only anthropogenic emission reductions, the ACI-induced PM 2.5 enhancement decreased by 43 % in January, which was lower than the decrease ratio of the ARI-induced enhancement (57 %). The relative change in ARI- and ACI-induced PM 2.5 enhancement in July was similar to the pattern observed in January, caused by anthropogenic emission reductions. The primary reason for this phenomenon is that the decrease in ambient PM 2.5 for 2013–2021 caused a disproportionately small decrease in the liquid water path (LWP) and an increase in the cloud effective radius (Re) under the condition of high PM 2.5 concentrations. Therefore, the surface solar radiation attenuation (and, hence, the boundary layer height reduction) caused by ACIs decreased slower than that caused by ARIs. Moreover, the lower decrease ratio of the ACI-induced PM 2.5 enhancement was dominated by the lower decrease ratio of ACI-induced secondary PM 2.5 component enhancement, which was additionally caused by the smaller decrease ratio of the air temperature reduction and the relative humidity (RH) increase. Our findings indicate that, with the decrease in ambient PM 2.5 , the ACI-induced PM 2.5 enhancement inevitably becomes more important. This needs to be considered in the formulation of control policies to meet the national PM 2.5 air quality standard.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Long-range transported North American wildfire aerosols observed in marine boundary layer of eastern North Atlantic

Wildfire is a major source of biomass burning aerosols, which greatly impact Earth climate. Tree species in North America (NA) boreal forests can support high-intensity crown fires, resulting in elevated injection height and longer lifetime (on the order of months) of the wildfire aerosols. Given the long lifetime, the properties of aged NA wildfire aerosols are required to understand and quantify their effects on radiation and climate. Here we present comprehensive characterization of climatically relevant properties, including optical properties and cloud condensation nuclei (CCN) activities of aged NA wildfire aerosols, emitted from the record-breaking Canadian wildfires in August 2017. Despite the extreme injection height of ~12 km, some of the wildfire plumes descended into the marine boundary layer in the eastern North Atlantic over a period of ~2 weeks, owing to the dry intrusions behind mid-latitude cyclones. The aged wildfire aerosols have high single scattering albedos at 529 nm (ω 529 ; 0.92–0.95) while low absorption Ångström exponents (Å abs ) at 464 nm/648 nm (0.7–0.9). In comparison, Å abs of fresh/slightly aged ones are typically 1.4–3.5. This low Å abs 529 and low Å abs ~110 nm diameter) with thick non-absorbing coatings. The accelerated descent of the wildfire plume also led to strong increase of CCN concentration at the supersaturation levels representative of marine low clouds. The hygroscopicity parameter, κ CCN , of the aged wildfire aerosols varies from 0.2 to 0.4, substantially lower than that of background marine boundary layer aerosols. However, the high fraction of particles with large diameter (i.e., within accumulation size ranges, ~100–250 nm) compensates for the low values of κ, and as a result, the aged NA wildfire aerosols contribute more efficiently to CCN population. These results provide direct evidence that the long-range transported NA wildfires can strongly influence CCN concentration in remote marine boundary layer, therefore the radiative properties of marine low clouds. Given the expected increases of NA wildfire intensity and frequency and regular occurrence of dry intrusion following mid-latitude cyclones, the influence of NA wildfire aerosols on CCN and clouds in remote marine environment need to be further examined.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Climatology of Marine Boundary Layer Cloud and Drizzle Properties derived from Ground-based Observations over the Azores

In this study, more than four years of ground-based observations and retrievals were collected and analyzed to investigate the seasonal and diurnal variations of single-layered MBL (with three subsets: non-drizzling, virga and rain) cloud and drizzle properties, as well as their vertical and horizontal variations. The annual mean drizzle frequency was ~55%, with ~70% in winter and ~45% in summer. The cloud-top (-base) height for rain clouds was the highest (lowest), resulted in the deepest cloud layer (0.8 km), which is four (two) times of non-drizzling (virga) clouds. The retrieved cloud-droplet effective radii (rc) were the largest (smallest) for rain (non-drizzling) clouds, and the nighttime values were greater than the daytime values. Drizzle number concentration (Nd) and liquid water content (LWCd) were three and one order(s) lower than their cloud counterparts. The rc and LWCc increased from the cloud base to ???? = ~0.75 by condensational growth, while drizzle median radii (rd) increased from the cloud top downwards the cloud base by collision-coalescence. The adiabaticity values monotonically increased from the cloud top to the cloud base with maxima of ~0.7 (0.3) for non-drizzling (rain) clouds. The drizzling process decreases the adiabaticity by 0.25 to 0.4, and the cloud-top entrainment mixing impacts as deep as upper 40% of the cloud layers. Cloud and drizzle homogeneities decreased with increased horizontal sampling lengths. Cloud homogeneity increases with increasing cloud fraction. These results can serve as baselines for studying MBL cloud-to-rain conversion and growth processes over the Azores.

Wu, Peng↗
DOE OSTI2022

Evaluating cloud liquid detection against Cloudnet using cloud radar Doppler spectra in a pre-trained artificial neural network

Detection of liquid-containing cloud layers in thick mixed-phase clouds or multi-layer cloud situations from ground-based remote-sensing instruments still poses observational challenges, yet improvements are crucial since the existence of multi-layer liquid layers in mixed-phase cloud situations influences cloud radiative effects, cloud lifetime, and precipitation formation processes. Hydrometeor target classifications such as from Cloudnet that require a lidar signal for the classification of liquid are limited to the maximum height of lidar signal penetration and thus often lead to underestimations of liquid-containing cloud layers. Here we evaluate the Cloudnet liquid detection against the approach of Luke et al. (2010) which extracts morphological features in cloud-penetrating cloud radar Doppler spectra measurements in an artificial neural network (ANN) approach to classify liquid beyond full lidar signal attenuation based on the simulation of the two lidar parameters particle backscatter coefficient and particle depolarization ratio. We show that the ANN of Luke et al. (2010) which was trained under Arctic conditions can successfully be applied to observations at the mid-latitudes obtained during the 7-week-long ACCEPT field experiment in Cabauw, the Netherlands, in 2014. In a sensitivity study covering the whole duration of the ACCEPT campaign, different liquid-detection thresholds for ANN-predicted lidar variables are applied and evaluated against the Cloudnet target classification. Independent validation of the liquid mask from the standard Cloudnet target classification against the ANN-based technique is realized by comparisons to observations of microwave radiometer liquid-water path, ceilometer liquid-layer base altitude, and radiosonde relative humidity. In addition, a case-study comparison against the cloud feature mask detected by the space-borne lidar aboard the CALIPSO satellite is presented. Three conclusions were drawn from the investigation. First, it was found that the threshold selection criteria of liquid-related lidar backscatter and depolarization alone control the liquid detection considerably. Second, all threshold values used in the ANN framework were found to outperform the Cloudnet target classification for deep or multi-layer cloud situations where the lidar signal is fully attenuated within low liquid layers and the cloud radar is able to detect the microphysical fingerprint of liquid in higher cloud layers. Third, if lidar data are available, Cloudnet is at least as good as the ANN. The times when Cloudnet outperforms the ANN in liquid detections are often associated with situations where cloud dynamics smear the imprint of cloud microphysics on the radar Doppler spectra.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Lagrangian analysis of pockets of open cells over the southeastern Pacific

Abstract. Pockets of open cells (POCs) have been shown to develop within closed-cell stratocumulus (StCu), and a large body of evidence suggests that the development of POCs result from changes in small-scale processes internal to the boundary layer rather than large-scale forcings. Precipitation is widely viewed as a key process important to POC development and maintenance. In this study, GOES-16 satellite observations are used in conjunction with MERRA-2 winds to track and compare the microphysical and environmental evolution of two populations of closed-cell StCu selected by visual inspection over the southeastern Pacific Ocean: one group that transitions to POCs and another comparison group (CLOSED) that does not. The high spatiotemporal resolution of the new GOES-16 data allows for a detailed examination of the temporal evolution of POCs in this region. We find that POCs tend to develop near the coast, last tens of hours, are larger than 104 km2, and often (88 % of cases) do not re-close before they exit the StCu deck. Most POCs are observed to form at night and tend to exit the StCu during the day when the StCu is contracting in area. Relative to the CLOSED trajectories, POCs have systematically larger effective radii, lower cloud drop number concentrations, a comparable conditional in-cloud liquid water path, and a higher frequency of more intense precipitation. Meanwhile, no systematic environmental differences other than boundary layer height are observed between POC and CLOSED trajectories. Interestingly, there are no differences in reanalysis aerosol optical depth between both sets of trajectories, which may lead one to the interpretation that differences in aerosol concentrations are not influencing POC development or resulting in a large number that re-close. However, this largely depends on the reanalysis treatment of aerosol–cloud interactions, and the product used in this study has no explicit handling of these important processes. These results support the consensus view regarding the importance of precipitation on the formation and maintenance of POCs and demonstrate the utility of modern geostationary remote sensing data in evaluating the POC life cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Unified Theory for the Global Thunderstorm Distribution and Land–Sea Contrast

This article evaluates Entraining CAPE (ECAPE) as a thunderstorm proxy in climate studies using Global Precipitation Measurement satellite observations. ECAPE modifies traditional CAPE to account for the dependence of entrainment on the vertical wind shear, the lifted condensation level (LCL) height, and the properties of a cloud's surrounding atmosphere. ECAPE shows stronger pattern correlations with global regions of intense thunderstorms than previous metrics for updraft speed. In these regions, large CAPE, large shear, and high LCLs conspire to produce wide updrafts that are shielded from the negative effects of dry-air entrainment. ECAPE more skillfully discriminates intense thunderstorms from their less intense counterparts than other metrics commonly used in climatology and climate change studies of thunderstorms. We provide evidence that the well-known land-sea contrast in thunderstorm intensity is a consequence of larger CAPE and higher LCL heights over land than over the ocean.

entraining CAPE↗
DOE OSTI2022

Convective and Turbulent Motions in Nonprecipitating Cu. Part II: LES Simulated Cloud Represented by a Starting Plume

The dynamic structure of a small trade wind cumulus (Cu) is analyzed using a novel approach. Cu developing in a shear-free environment is simulated by 10-m-resolution LES model with spectral bin microphysics. The aim is to clarify the dynamical nature of cloud updraft zone (CUZ) including entrainment and mixing in growing Cu. The validity of concept stating that a cloud at developing state can be represented by a parcel or a jet is tested. To investigate dynamical entrainment in CUZ performed by motions with scales larger than the turbulence scales, the modeled fields of air velocity were filtered by wavelet filter that separated convective motions from turbulent ones. Two types of objects in developing cloud were investigated: small volume ascending at maximal velocity (point parcel) and CUZ. It was found that the point parcel representing the upper part of cloud core is adiabatic. The motion of the air in this parcel ascending from cloud base determines cloud-top height. The top-hat (i.e., averaged) values of updraft velocity and adiabatic fraction in CUZ are substantially lower than those in the point parcel. Evaluation of the terms in the dynamical equation typically used in 1D cloud parcel models show that this equation can be applied for calculation of vertical velocities at the developing stage of small Cu, at least up to the heights of the inversion layer. Dynamically, the CUZ of developing cloud resembles the starting plume with the tail of nonstationary jet. Both the top-hat vertical velocity and buoyancy acceleration linearly increase with the height, at least up to the inversion layer. An important finding is that lateral entrainment of convective (nonturbulent) nature has a little effect on the top-hat CUZ velocity and cannot explain the vertical changes of conservative variables qt and θl. In contrast, entrained air lifting inside CUZ substantially decreases top-hat liquid water content and its adiabatic fraction. Possible reasons of these effects are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Aerosol impacts on isolated deep convection: findings from TRACER

This study focuses on quantifying the conditional relationship between aerosol and convective precipitation properties of isolated deep convective clouds (DCCs) in the Houston–Galveston region, after adjusting for confounding effects. We leverage comprehensive ground-based observations from the TRacking Aerosol Convection interactions ExpeRiment (TRACER) to estimate aerosol effects on convective echo top height (ETH), intensity, and area separately. Our results show that greater aerosol number concentrations generally have a limited impact on these convective properties, showing relationships consistent with the possibility of both invigoration and suppression effects. Under certain conditions, where ultrafine particles are abundant, aerosols exhibit a positive effect on ETH, increasing it by about 1 km. However, it is inevitable to consider measurement uncertainties and the limitations of temporal and spatial resolution in the data, as these factors can further contribute to uncertainties in our estimates. In DCCs associated with sea breezes, the estimated aerosol effects on DCCs are found to be more pronounced. However, this heightened effect could be attributed to the exclusion of key confounders such as boundary layer updrafts in the analysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Comprehensive analysis of disruption mitigation methods using gas and pellet-like injections in ITER-like Tokamaks

Abstract Inert-gas shielding could be an effective mechanism for protection of plasma facing surfaces (PFS) against plasma particles impact and photon radiation heat loads during transient events in fusion devices. Neutral gas injection is one promising way to mitigate erosion of tokamak components and contamination. The objective of this work is to study and optimize mitigation methods using neutral gas and pellet-like injections to decrease the heat load to the divertor surfaces and to prevent vaporization of the various internal surfaces due to transient events in ITER-like devices. The integrated self-consistent models implemented in the HEIGHTS package was used for detailed analysis of the potential secondary plasma generation from the injected inert gas, its radiative characteristics, and shielding effectiveness. We varied the density, size, and location of an argon gas cloud to minimize the disruption energy deposited into the divertor components. We also investigated innovative ways for minor changes in ITER-like internal design to mitigate disruptions. We found the optimum parameters to fully protect ITER tokamak surfaces from erosion and vaporization during plasma instabilities. This preliminary analysis showed that using Ar gas injection methods could lead to enhancement in components lifetime in ITER-like and future DEMO devices with minor design changes.

Science & Technology - Other Topics↗
DOE OSTI2023

Grounding our Understanding of the Impacts of Boreal Forest Expansion on Shallow Cumulus Clouds with a Simple Modeling Framework

Abstract The expansion of the boreal forest poleward is a potentially important driver of feedbacks between the land surface and Arctic climate. A growing body of work has highlighted the importance of differences in evaporative resistance between different possible future Arctic land covers, which in turn alters humidity and cloudiness in the boundary layer, for these feedbacks. While thus far this problem has been studied primarily with complex Earth system models, we turn to a locally focused, idealized model capable of diagnosing and testing the sensitivity of first-order processes connecting vegetation, the atmospheric boundary layer, and low clouds in this critical region. This allows us to benchmark the mechanisms and results at the center of predictions from larger-scale simulations. A surface dominated by broadleaf trees, characterized by higher albedo and lower surface evaporative resistance, drives cooling and moistening of the boundary layer relative to a surface of needleleaf trees, characterized by lower albedo and higher surface evaporative resistance. Differences in evaporative resistance between these hypothetical Arctic vegetation covers are of equal importance to changes in albedo for the initial response of the boundary layer to boreal expansion, even with our idealized approach. However, compensation between the elevation of the lifting condensation level (LCL) and more rapid growth of the mixed layer over higher evaporative resistance surfaces can minimize changes in the favorability of shallow clouds over different land cover types under some conditions. We then perform two tests on the sensitivity of this compensating effect, to changes in water availability, represented first by a reduction in boundary layer humidity and then by both a reduction in humidity and soil moisture available to our vegetation surface. Finally, given the importance of this potential LCL–mixed-layer height compensation in our idealized modeling results, we look to determine its relevance in observational data from a field campaign in boreal Finland. These observations do confirm that such a coupling plays an important role in cumulus-topped boundary layers over a needleleaf forest surface. While our results confirm some underlying mechanisms at the center of prior work with Earth system models, they also provide motivation for future work to constrain the impact of boreal forest expansion. This will include both large eddy simulations to examine the impact of processes and feedbacks not resolved by a mixed-layer model, as well as a more systematic evaluation and comparison of relevant observations at the site in Finland and sites from prior boreal field campaigns. Significance Statement Clouds and vegetation are both important components of the climate system that interact across a range of scales. These interactions are central to understanding how changes at the land surface feedback on climate. For example, if a forest expands or recedes, diagnosing how that will impact clouds will determine whether you predict warming or cooling temperatures from that shift in the forest area. These predictions are often made with complex Earth system models, but we look to a more idealized representation of the land–atmosphere system to diagnose how shallow clouds should respond to changes in surface properties with different scenarios of boreal forest expansion at a more foundational level. This both grounds our understanding of previous analysis and provides helpful direction for future studies of this relevant and impactful land cover change.

Meteorology & Atmospheric Sciences↗
DOE OSTI2020

An Observational Comparison of Level of Neutral Buoyancy and Level of Maximum Detrainment in Tropical Deep Convective Clouds

Tropical deep convective clouds are important drivers of large-scale atmospheric circulation representing the main vertical transport pathway through the depth of the troposphere for heat, momentum, water, and chemical species. The strength and depth of this transport are impacted by the convective updraft size and intensity that are driven by buoyancy, dynamical forcing, and mixing of environmental air, i.e., entrainment. In this paper, we identify tropical deep convective systems with well-defined forward anvils using Atmospheric Radiation Measurement (ARM) ground-based profiling radars, at three ARM fixed-sites in the Tropical Western Pacific (TWP; i.e., Manus, Nauru, Darwin) and three ARM Mobile Facility deployments in Niamey, Niger; Gan Island, Maldives; and Manacapuru, Brazil. We use the difference between the level of neutral buoyancy (LNB) and the level of maximum detrainment (LMD) as a proxy for the effective bulk convective entrainment (εproxy). The LNB, the theoretical height that a parcel raised above the level of free convection would reach with no mixing, is calculated based on pre-convection radiosonde measurements using parcel theory. The LMD is the height of the maximum reflectivity observed in forward anvil clouds by profiling radars. Deep convective systems over the TWP show higher LNBs that extend to 16.3 km on average and larger εproxy (median LNB minus LMD up to 6.5 km) compared to their continental counterparts in the Amazon and West Africa. Oceanic conditions show larger convective available potential energy (CAPE) coupled with higher moisture at low levels which favors larger εproxy. In contrast, continental cases initiate and develop under high convective inhibition, steeper environmental lapse rate, and high wind shear conditions, which show smaller offset between LNB and LMD. Deep convective cases that promote significant cold pools at the surface experience less εproxy. Using a Random Forest regression algorithm, CAPE is associated with the highest feature importance score for predicting convective εproxy, followed by low-level relative humidity. For continental cases, the low-level wind shear also indicates higher importance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Are turbulence effects on droplet collision–coalescence a key to understanding observed rain formation in clouds?

Rain formation is a critical factor governing the lifecycle and radiative forcing of clouds and therefore it is a key element of weather and climate. Cloud microphysics–turbulence interactions occur across a wide range of scales and are challenging to represent in atmospheric models with limited resolution. Based on past experiments and idealized numerical simulations, it has been postulated that cloud turbulence accelerates rain formation by enhancing drop collision–coalescence. We provide substantial evidence for significant impacts of turbulence on the evolution of cloud droplet size distributions and rain formation by comparing high-resolution observations of cumulus congestus clouds with state-of-the-art large-eddy simulations coupled with a Lagrangian particle-based microphysics scheme. Turbulent coalescence must be included in the model to accurately represent the observed drop size distributions, especially for drizzle drop sizes at lower heights in the cloud. Turbulence causes earlier rain formation and greater rain accumulation compared to simulations with gravitational coalescence only. The observed rain size distribution tail just above cloud base follows a power law scaling that deviates from theoretical scalings considering either a purely gravitation collision kernel or a turbulent kernel neglecting droplet inertial effects, providing additional evidence for turbulent coalescence in clouds. In contrast, large aerosols acting as cloud condensation nuclei (“giant CCN”) do not significantly impact rain formation owing to their long timescale to reach equilibrium wet size relative to the lifetime of rising cumulus thermals. Overall, turbulent drop coalescence exerts a dominant influence on rain initiation in warm cumulus clouds, with limited impacts of giant CCN.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

High-Resolution LiDAR Observations for Coupled Effects of Dry-Air Entrainment and Haze-Cloud Interactions on Cloud Vertical Structure

This study demonstrates the high-resolution profiling of cloud microphysics in a laboratory chamber using Time-Correlated Single Photon Counting (TCSPC) LiDAR. We present a novel retrieval method to derive vertical extinction (𝜎) profiles, constrained by in situ measurements, to diagnose responses to dry-air entrainment. In clean clouds, the LiDAR signals and retrieved 𝜎 remain relatively uniform, with entrainment effects confined to the upper layer. In contrast, polluted clouds exhibit strong vertical variability and a transition to a water-vapor-limited state. Entrainment significantly enhances the haze number concentration (𝑁ℎ), particularly near the bottom, creating highly height-dependent extinction profiles for polluted clouds. Our results highlight the capability of high-resolution LiDAR in capturing fine-scale vertical inhomogeneities. This approach provides a robust framework for quantifying how aerosol loading modulates entrainment sensitivity, offering new insights into the transition between buffered and water-vapor-limited regimes.

54 ENVIRONMENTAL SCIENCES↗