Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compression Corner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Diffraction of a shock wave by a compression corner. II - Single Mach reflection

The two-dimensional time-dependent Euler equations which govern the flow field resulting from the interaction of a planar shock with a compression corner are solved for initial conditions which result in single Mach reflection of the incident planar shock. The Euler equations are first transformed to include the self-similarity of the flow field. A second transformation is employed to normalize the distances between the ramp and the reflected shock and between the wall and the Mach stem. The resulting equations in strong conservation-law form are solved using a second-order discontinuity-fitting finite-difference approach. The results are compared with experimental interferograms and existing first-order shock-capturing numerical solutions.

Shankar, V.↗
NASA NTRS1991

Aerothermal study in an axial compression corner with shock impingement at Mach 6

An experimental study of an axial-compression interior-corner region with shock impingement was conducted in the NASA Langley 20-inch Mach 6 Tunnel to obtain aerodynamic heating rate distributions. The model, a generic hypersonic engine inlet, had a sharp leading edge forebody, cowl, and interchangeable struts with sharp and blunt leading edges. Experiments were conducted at free-stream unit Reynolds numbers of 1.68 x 10 to the 6th and 3.35 x 10 to the 6th per foot for the blunt and sharp-strut configurations, respectively. For the sharp-strut configuration, with and without trips, the peak heating occurred on the cowl, near the compression corner, downstream of the forebody oblique shock impingement region. The peak heating levels, for both the tripped and untripped boundary-layer flows were about 45 and 50 times the reference laminar heating levels, respectively. The peak heating for the blunt leading edge strut model, which was 30 times the reference value, occurred on the cowl, away from the corner, where the bow shock from the strut leading edge intersected the cowl surface.

Venkateswaran, S.↗
NASA NTRS1976

Numerical simulation of supersonic and hypersonic turbulent compression corner flows using relaxation models

Relaxation turbulence eddy viscosity models are incorporated to solve the complete Navier-Stokes equations for supersonic and hypersonic flows over a two-dimensional compression corner. The system of equations is solved by a time-split, second-order accurate numerical scheme. Details of relaxation process are studied, and several relaxation models are tested and compared. Good improvement in the prediction of upstream pressure propagation is obtained for a Mach number of 2.96, and Reynolds number of 10,000,000, with wedge angle of 25 deg. However, the application of the relaxation models to hypersonic flow at Mach number 8.66 and Reynolds number of 22,000,000, with highly cooled wall, shows unfavorable effects on heat transfer and skin friction in the reattachment and recompression regions.

Hung, C. M.↗
NASA NTRS1991

Hypersonic rarefied flow about a compression corner - DSMC simulation and experiment

The phenomena of shock/boundary-layer interactions and flow separation are investigated using both computational and experimental methods for low-density hypersonic flow about two-dimensional compression corners. The numerical calculations are made with the direct simulation Monte Carlo (DSMC) method. Experimental measurements provide information concerning the flowfield structure and surface flow patterns by means of gas glow discharge and oil flow pictures, respectively. Comparison of the two data sets provides a qualitative basis for assessing the ability of the DSMC method to describe such flows.

Moss, James N.↗
NASA NTRS1975

Numerical solutions of supersonic and hypersonic laminar flows over a two-dimensional compression corner

An efficient time-splitting, second-order accurate, numerical scheme is used to solve the complete Navier-Stokes equations for supersonic and hypersonic laminar flow over a two-dimensional compression corner. A fine, exponentially stretched mesh spacing is used in the region near the wall for resolving the viscous layer. Good agreement is obtained between the present computed results and experimental measurement for a Mach number of 14.1, a Reynolds number of 104,000, and wedge angles of 15, 18, and 24 deg. The details of the pressure variation across the boundary layer are given, and a correlation between the leading edge shock and the peaks in surface pressure and heat transfer is observed.

Hung, C. M.↗
NASA NTRS1983

Investigation of supersonic separated flow in a compression corner by laser Doppler anemometry

A single-component, computer-operated, three dimensional traversing laser Doppler velocimetry system was designed and constructed for a supersonic wind tunnel. The model was a 10 deg compression corner, providing an example of laminar boundary layer separation. Static pressure data and color schlieren photographs were taken. The Mach number was 2.42 and the Reynolds number was 213,000. The flow was seeded with submicron sized oil droplets. The trend of decreasing upstream influence with increasing Reynolds number was confirmed. Mean velocity profiles provided experimental evidence of reversed flow. Points of separation and reattachment were consistent with those determined by schlieren and pressure scans. The flow was of the laminar type until downstream of reattachment. Individual mean velocity and turbulence profiles, as well as velocity histograms are presented.

Baroth, E. C.↗
NASA NTRS1976

Numerical Solutions of Supersonic and Hypersonic Laminar Compression Corner Flows

An efficient time-splitting, second-order accurate, numerical scheme is used to solve the complete Navier-Stokes equations for supersonic and hypersonic laminar flow over a two-dimensional compression corner. A fine, exponentially stretched mesh spacing is used in the region near the wall for resolving the viscous layer. Good agreement is obtained between the present computed results and experimental measurement for a Mach number of 14.1 and a Reynolds number of 1.04 x 10(exp 5) with wedge angles of 15 deg, 18 deg, and 24 deg. The details of the pressure variation across the boundary layer are given, and a correlation between the leading edge shock and the peaks in surface pressure and heat transfer is observed.

Hung, C. M.↗
NASA NTRS1984

Flowfield scaling of a swept compression corner interaction A comparison of experiment and computation

Over the past decade, there has been some important progress in understanding the problems of three-dimensional (3D) shock wave/turbulent boundary layer interactions. However, the problems are by no means solved. The present investigation has the objective to determine the flowfield structure of a swept compression corner interaction and to perform a test of an equation considered by Settles and Bogdonoff (1982). The experimental data obtained in a 20 x 20 cm high Reynolds number supersonic wind tunnel are compared with the predictions of a state-of-the-art numerical solution of the Navier-Stokes equations. It is found that a 3D scaling law for Reynolds number effects, previously established for interaction 'footprints', is equally valid when applied to the present flowfield.

Settles, G. S.↗
NASA NTRS2015

Revisiting Turbulence Model Validation for High-Mach Number Axisymmetric Compression Corner Flows

Two axisymmetric shock-wave/boundary-layer interaction (SWBLI) cases are used to benchmark one- and two-equation Reynolds-averaged Navier-Stokes (RANS) turbulence models. This validation exercise was executed in the philosophy of the NASA Turbulence Modeling Resource and the AIAA Turbulence Model Benchmarking Working Group. Both SWBLI cases are from the experiments of Kussoy and Horstman for axisymmetric compression corner geometries with SWBLI inducing flares of 20 and 30 degrees, respectively. The freestream Mach number was approximately 7. The RANS closures examined are the Spalart-Allmaras one-equation model and the Menter family of kappa − omega two equation models including the Baseline and Shear Stress Transport formulations. The Wind-US and CFL3D RANS solvers are employed to simulate the SWBLI cases. Comparisons of RANS solutions to experimental data are made for a boundary layer survey plane just upstream of the SWBLI region. In the SWBLI region, comparisons of surface pressure and heat transfer are made. The effects of inflow modeling strategy, grid resolution, grid orthogonality, turbulent Prandtl number, and code-to-code variations are also addressed.

Shock Wave↗
NASA NTRS2018

Large-Eddy Simulation of Axisymmetric Compression Corner Flow

The Wall-Modeled Large Eddy Simulation (WMLES) approach is used to study the interaction of a shock wave with a high Reynolds number turbulent boundary layer. Since the near wall region is modeled, high Reynolds number turbulent flows can be simulated at a moderate computational cost. The case considered is that of an axisymmetric Mach 2.85 turbulent boundary layer over a 30 compression corner. The Reynolds number of the boundary layer upstream of the interaction based on momentum thickness (Re theta = u sub infinity theta/v sub infinity) is ~12,000. The geometry and flow conditions match the experiments of Dunagan et al. (NASA TM 88227, 1986). The simulations were performed using equilibrium and non-equilibrium wall models. The agreement with experiment is encouraging for the finest grid with respect to the separation bubble length, unsteady shock structure and wall pressure distribution. Sensitivity ofWMLES results to grid, wall model, and blockage effects in the tunnel are reported.

Iyer, Prahladh S.↗
NASA NTRSDate not supplied

Fluid-Thermal-Structural Interactions Induced by an Asymmetric Shock-Wave/Boundary-Layer Interaction in a Mach-6 Compression Corner

An experimental study is conducted of the fluid-thermal-structural interaction of a clamped compliant panel exposed to a three dimensional shock-wave/boundary-layer interaction (SWBLI) induced by a Mach-6 compression ramp with a spanwise nonuniform incoming boundary layer. The nonuniform boundary layer was produced by placing trips on one side of the upstream flat plate, resulting in largely turbulent flow on the tripped side and transitional flow on the untripped side. Measurements of the flowfield confirmed that the tripped boundary layer contained elevated levels of unsteadiness, and the SWBLI was observed to vary from attached to fully separated as the ramp angle was increased from 10◦ to 38◦; the separation region on the tripped side of the panel was noticeably smaller, showing the elevated turbulence levels of the tripped-side flow to remain relatively localized rather than diffusing across the whole model. Full-field, time-resolved panel deformations were measured using high-speed photogrammetry and the vibrational response at each compression angle was characterized. Although the measured modes conformed largely to those from classical clamped-plate theory, some skewing of the mode shapes was observed. IR thermography highlighted regions of the compliant region where elevated temperatures were likely to promote thermal softening effects to the transient panel response. The quasi-static deformation and stress field was used to characterize the internal stress factor of each mode and showed a meaningful relationship between transient panel response and stress contained within each mode: modes with antinodes lying in high-stress areas of the plate tended to exhibit increases in vibrational frequency and decreases in vibrational power, whereas the opposite was true for modes with antinodes in low-stress areas.

Spectral Proper Orthogonal Decomposition↗
NASA NTRSDate not supplied

Unsteady CFD Simulations of a Compression Corner Geometry Using Wall-Modeled LES Methods in Loci/CHEM

As computing technology continues to improve, simulating unsteady aerodynamic environments on launch vehicle geometries becomes more viable. For NASA’s Space Launch System, the flowfield is characterized by large regions of unsteady turbulent wall-bounded flow. Simulating these unsteady wall-bounded environments is of interest to the SLS Aerodynamics team. Wall-modeled LES methods are currently the best approach for simulating these environments in engineering applications. Less-expensive computationally than fully-resolved methods while maintaining many of the benefits in simulating unsteady environments. Before applying these methods blindly to large geometries, best practices can first be applied and understood on smaller canonical problems.

Bryson Frank↗
NASA NTRS1995

Reduction of fluctuating pressure loads in shock wave turbulent boundary layer interactions

Fluctuating surface pressure measurements have been made to investigate the effectiveness of boundary layer separators (BLS's) in reducing the fluctuating pressure loads produced by separated shock wave turbulent boundary layer interactions. Measurements have been made under unswept and swept compression corner interactions in a Mach 5 flow. BLS's fix the separation location and eliminate the large-amplitude, low-frequency fluctuating pressure loads upstream of the compression corners. The loads on the unswept compression corner face are reduced by as much as 59%. The BLS's also shift the mean pressure distribution on the unswept corner face in the streamwise direction. Results show that the loads on the corner face vary with the BLS height and the distance between the BLS and the compression corner. Suggestions for the optimum placement and the use of the BLS's are also made.

Barter, John W.↗