Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conducted Emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Refractive Index and Scattering Effects on Radiative Behavior of a Semitransparent Layer

Heat transfer characteristics are analyzed for a plane layer of semitransparent material with refractive index not less than 1. Energy transfer in the material is by conduction, emission, absorption, and isotropic scattering. Each side of the layer is heated by radiation and convection. For a refractive index larger than unity, there is internal reflection of some of the energy within the layer. This, coupled with scattering, has a substantial effect on distributing energy across the layer and altering the temperature distribution from when the refractive index is unity. The effect of scattering is examined by comparisons with results from an earlier paper for an absorbing layer. Results are given for a gray medium with a scattering albedo up to 0.999, and for a two-band spectral variation of the albedo with one band having low absorption. Radiant energy leaving the surface as a result of emission and scattering was examined to determine if it could be used to accurately indicate the surface temperature.

Spuckler, C. M.↗
NASA NTRS1998

EMI Performance of the AIRS Cooler and Electronics

The TRW pulse tube cryocooler for JPL's Atmospheric Infrared Sounder (AIRS) instrument is required to meet stringent requirements for radiated electric and magnetic fields, conducted emissions on the input power bus, and electromagnetic susceptivility.

EMI AIRS Cooler Electronics Cryocooler↗
NASA NTRS2015

EMI / EMC Design for Class D Payloads (Resource Prospector / NIRVSS)

EMI/EMC techniques are applied to a Class D instrument (NIRVSS) to achieve low noise performance and reduce risk of EMI/EMC testing failures and/or issues during system integration and test. Basic techniques are not terribly expensive or complex, but do require close coordination between electrical and mechanical staff early in the design process. Low-cost methods to test subsystems on the bench without renting an EMI chamber are discussed. This method was applied to the NIRVSS instrument and achieved improvements up to 59dB on conducted emissions measurements between hardware revisions.

low noise↗
NASA NTRS2017

Feasibility of Powerline Communications (PLC) on Future Spacecraft: EMI/EMC Test Results on COTS PLC Technology

Cable harnessing mass continues to be a problem for spacecraft development, particularly with increasingly complex payloads and constraints to their mass and costs. As a strategic initiative to reduce cable harnessing on flight missions, NASA JPL’s Powerline Communications (PLC) research and technology development (R&TD) effort investigates the ability to combine power and data onto the same cable conductors. Research and development of PLC technology, including testing of commercial off-the-shelf (COTS) modules and design of custom PLC unit, aim to articulate the opportunity to infuse this technology into NASA flight projects. This paper illustrates the feasibility of Powerline Communications on future spacecraft through Electromagnetic Interference/Compatibility (EMI/EMC) testing on COTS PLC components including conducted emissions and susceptibility as well as radiated emissions and susceptibility.

Mitchell, Andrew W.↗
NASA NTRS1978

Secondary electron emission properties of conducting surfaces for use in multistage depressed collectors

An Auger spectrometer in ultrahigh vacuum was used to measure the secondary emission properties of a number of candidate collector-materials including beryllium, carbon, (soot and pyrolytic graphite), copper, titanium carbide and tantalum. The advantage of the technique used is that the surface chemical constituents could be determined just before the secondary emission characteristics of the surface were measured. Pyrolytic graphite roughened by sputter etching showed the most favorable results for depressed collector use.

Forman, R.↗
NASA NTRS1977

Secondary-electron-emission properties of conducting surfaces with application to multistage depressed collectors for microwave amplifiers

To improve the efficiency of high power microwave tubes, low secondary electron yield electrode surface for use in depressed collectors are needed. The secondary emission characteristics of a number of materials were investigated. The materials studied were beryllium, carbon (soot and pyrolytic graphite), copper, titanium carbide, and tantalum. Both total secondary yield delta and relative reflected primary yield were measured. These measurements were made in conjunction with Auger spectroscopy so that the secondary emission characteristics could be determined as a function of surface contamination or purity. The results show that low atomic weight elements, such as beryllium and carbon, have the lowest reflected primary yield and that roughening the surface of an electrode can markedly decrease secondary yield both for delta and reflected primaries. All factors considered, a roughened pyrolytic graphite surface showed the greatest potential for use as an electrode surface in depressed collectors.

Forman, R.↗
NASA NTRS1994

Determination of ionospheric conductivities from FUV auroral emissions

The purpose of this paper is to examine the viability of using Lyman-Birge-Hopfeld (LBH) emission ratios to infer auroral conductances and to quantify the strengths and weaknesses of this technique. We show that column-integrated Hall and Pedersen conductances may be determined from a single remote measurement of a pair of auroral LBH emissions, one in the region of strong O2 absorption (1464 A) and one lying outside of this region (1838 A). The dependence of the determined conductivities on incident average energy, total energy flux, and changes in solar and magnetic activity levels is examined. We show that, for eneriges above 5 keV, auroral conductances may be scaled by the square root of the incident energy flux with errors less than about 20%. For lower energies, however, the scaling may deviate significantly from a power of 0.5. We provide appropriate scaling factors as a function of average energy. We also note that the choice of either a Gaussian or Maxwellian distribution can significantly affect low-energy (less than keV) conductance calculations. Finally, we quantify the conditions under which the mean energy of a Gaussian energy distribution may differ significantly from the characteristic energy.

Germany, G. A.↗
NASA NTRS1992

An analysis of the temperature dependence of the gate current in complementary heterojunction field-effect transistors

The temperature dependence of the gate current versus the gate voltage in complementary heterojunction field-effect transistors (CHFET's) is examined. An analysis indicates that the gate conduction is due to a combination of thermionic emission, thermionic-field emission, and conduction through a temperature-activated resistance. The thermionic-field emission is consistent with tunneling through the AlGaAs insulator. The activation energy of the resistance is consistent with the ionization energy associated with the DX center in the AlGaAs. Methods reducing the gate current are discussed.

Cunningham, Thomas J.↗
NASA NTRS2014

Analyzing Source Apportioned Methane in Northern California During DISCOVER-AQ-CA Using Airborne Measurements and Model Simulations

This study analyzes source apportioned methane (CH4) emissions and atmospheric concentrations in northern California during the Discover-AQ-CA field campaign using airborne measurement data and model simulations. Source apportioned CH4 emissions from the Emissions Database for Global Atmospheric Research (EDGAR) version 4.2 were applied in the 3-D chemical transport model GEOS-Chem and analyzed using airborne measurements taken as part of the Alpha Jet Atmospheric eXperiment over the San Francisco Bay Area (SFBA) and northern San Joaquin Valley (SJV). During the time period of the Discover-AQ-CA field campaign EDGAR inventory CH4 emissions were 5.30 Gg/day (Gg 1.0 109 grams) (equating to 1.9 103 Gg/yr) for all of California. According to EDGAR, the SFBA and northern SJV region contributes 30 of total emissions from California. Source apportionment analysis during this study shows that CH4 concentrations over this area of northern California are largely influenced by global emissions from wetlands and local/global emissions from gas and oil production and distribution, waste treatment processes, and livestock management. Model simulations, using EDGAR emissions, suggest that the model under-estimates CH4 concentrations in northern California (average normalized mean bias (NMB) -5 and linear regression slope 0.25). The largest negative biases in the model were calculated on days when hot spots of local emission sources were measured and atmospheric CH4 concentrations reached values 3.0 parts per million (model NMB -10). Sensitivity emission studies conducted during this research suggest that local emissions of CH4 from livestock management processes are likely the primary source of the negative model bias. These results indicate that a variety, and larger quantity, of measurement data needs to be obtained and additional research is necessary to better quantify source apportioned CH4 emissions in California and further the understanding of the physical processes controlling them.

Methane↗
NASA NTRS1996

Hard Gamma Ray Emission from the Starburst Galaxy NGC 253

We have completed the study to search for hard gamma ray emission from the starburst galaxy NGC 253. Since supernovae are thought to provide the hard gamma ray emission from the Milky Way, starburst galaxies, with their extraordinarily high supernova rates, are prime targets to search for hard gamma ray emission. We conducted a careful search for hard gamma ray emission from NGC 253 using the archival data from the EGRET experiment aboard the CGRO. Because this starburst galaxy happens to lie near the South Galactic Pole, the Galactic gamma ray background is minimal. We found no significant hard gamma ray signal toward NGC 253, although a marginal signal of about 1.5 sigma was found. Because of the low Galactic background, we obtained a very sensitive upper limit to the emission of greater than 100 MeV gamma-rays of 8 x 10(exp -8) photons/sq cm s. Since we expected to detect hard gamma ray emission, we investigated the theory of gamma ray production in a dense molecular medium. We used a leaky-box model to simulate diffusive transport in a starburst region. Since starburst galaxies have high infrared radiation fields, we included the effects of self-Compton scattering, which are usually ignored. By modelling the expected gamma-ray and synchrotron spectra from NGC 253, we find that roughly 5 - 15% of the energy from supernovae is transferred to cosmic rays in the starburst. This result is consistent with supernova acceleration models, and is somewhat larger than the value derived for the Galaxy (3 - 10%). Our calculations match the EGRET and radio data very well with a supernova rate of 0.08/ yr, a magnetic field B approx. greater than 5 x 10(exp -5) G, a density n approx. less than 100/sq cm, a photon density U(sub ph) approx. 200 eV/sq cm, and an escape time scale tau(sub 0) approx. less than 10 Myr. The models also suggest that NGC 253 should be detectable with only a factor of 2 - 3 improvement in sensitivity. Our results are consistent with the standard picture of gamma-ray acceleration by supernovae.

Jackson, James M.↗
NASA NTRS1982

The Mg II resonance line emission at 2800 A in stars with different rotational velocities and different metal abundances

In many investigations, a study of the Mg II 2800 A emission was conducted in order to derive more information about the correlation of chromospheric emission with the properties of the convection zone. It has been suggested by Ayres and Linsky (1980) that there is a positive correlation between rotation and chromospheric emission at least for binary stars. The present investigation is concerned with such a correlation between rotation and chromospheric emission. Since large differences in rotational velocities are observed for F stars for which also strong chromospheric emission is observable, this particular study deals mainly with F stars. On the basis of observations of the Mg II emission in F and G stars, it is found that the emission is abnormally strong in close binary F stars. This may be explained by the generation of a large differential rotation due to tidal effects which may give very efficient dynamo generation of a surface magnetic field.

Boehm-Vitense, E.↗
NASA NTRS1996

Transient Heat Transfer in a Semitransparent Radiating Layer with Boundary Convection and Surface Reflections

Surface convection and refractive index are examined during transient radiative heating or cooling of a grey semitransparent layer with internal absorption, emission and conduction. Each side of the layer is exposed to hot or cold radiative surroundings, while each boundary is heated or cooled by convection. Emission within the layer and internal reflections depend on the layer refractive index. The reflected energy and heat conduction distribute energy across the layer and partially equalize the transient temperature distributions. Solutions are given to demonstrate the effect of radiative heating for layers with various optical thicknesses, the behavior of the layer heated by radiation on one side and convectively cooled on the other, and a layer heated by convection while being cooled by radiation. The numerical method is an implicit finite difference procedure with non-uniform space and time increments. The basic method developed in earlier work is expanded to include external convection and incident radiation.

Siegel, Robert↗
NASA NTRS1981

On the relationship between soft X-rays and H-alpha-emitting structures during a solar flare

Based on data obtained during a solar flare on March 31, 1979, soft X-ray (SXR) and hard X-ray (HXR) bursts are analyzed and compared with other available data in order to identify structures in H-alpha that may correspond to the SXR-emitting site. Measurements taken with the X-ray telescope and the XUV spectroheliograph flown on Skylab, have shown that the SXR emission from many flares comes from rather small structures of about 10-20 arcsec across. These structures appear to be loops that cross the magnetic neutral line. Understanding of the morphology of SXR was based on data of the solar flare of June 15, 1973, observed from Skylab, and the work of Moore et al., (1980). Dense, highly emissive coronal structures, not suggested to be the X-ray source, were forming, lost energy rapidly by emission and conduction, and finally formed the loops. It is concluded that bright H-alpha loops form rapidly as the SXR emission rises, and the overall decay (cooling rate) of SXR emission is much slower than the formation time of individual loops.

Zirin, H.↗
NASA NTRS2022

Greenhouse Gas Emission Estimations for 2016-2020 using the Sherlock Air Traffic Data Warehouse

Data and analyses are presented on the utilization of aircraft in the U.S. and the greenhouse gas emissions that they create. Commercial passenger and cargo aviation flight data, captured in the Sherlock data warehouse at NASA Ames over the five years from 2016 to 2020, is used to estimate the miles flown by major aircraft models. The estimates for aggregate annual number of flights are validated against data published by the Bureau of Transportation Statistics. The corresponding fuel usage is estimated using the International Civilian Aviation Organization (ICAO) fuel use tables and carbon dioxide emissions are calculated using a fuel-use multiplicative factor. A key conclusion of this analysis is that a small number of long-haul flights (with ranges greater than 2485 statute miles) create a disproportionately large fraction (30%) of annual total U.S. aviation-related carbon dioxide emissions, while a relatively large number of short flights (less than 311 statute miles) contribute a small net amount (less than 5%) of U.S. aviation-related carbon dioxide emissions. These U.S. results are consistent with a similar recent 2020 emissions study conducted by EUROCONTROL.

Emissions↗
NASA NTRS1976

Avco Lycoming emission and flight test results

The Avco Lycoming flight test program for reduced emissions was conducted to determine and document the lean fuel schedule limits for current production aircraft based on flight safety. Based on analysis of the emissions profile, Avco Lycoming proposed to evaluate the effect of leaner schedules in the idle/taxi, climb, and approach modes. These modes were selected as areas where it was felt that possible improvements could be made with the greatest improvement in cyclic emissions reduction. The fuel systems to produce these leaner stepped fuel schedules were tailored specifically for the flight test.

Duke, L. C.↗
NASA NTRS2020

Evaluation of NASA’s Remote-Sensing Capabilities in Coastal Environments

This work represents the second part of a two-part study set up by the National Aeronautics and Space Administration (NASA) and Bureau of Ocean Energy Management (BOEM) in 2017. The study summarizes a three-year investigation on the feasibility of using satellite remote sensing to monitor emissions of oil and gas operations over the outer continental shelf (OCS) to determine if they have negative impacts on coastal air quality (AQ). The target pollutant is nitrogen dioxide (NO2), for which BOEM conducts regular emissions surveys. The major data source for this report is a May 2019 oceanographic cruise (“SCOAPE” = Satellite Coastal and Oceanic Atmospheric Pollution Experiment) conducted in the Gulf of Mexico (GoM) off Louisiana with the Research Vessel Point Sur, loaded with a suite of trace-gas analyzers and a direct-sun remote sensor Pandora spectrometer that measures column NO2. The SCOAPE cruise, augmented by in situ NO2 and Pandora measurements at Cocodrie (Louisiana; 29.25° N, 90.66° W) showed that (1) under cloud-free conditions, satellites can detect elevated column NO2 amounts near isolated large platforms and from clusters of smaller operations; (2) satellite (the European Space Agency’s TROPOspheric Monitoring Instrument [TROPOMI]) total column (TC) NO2 agrees well with TC NO2 from ground-based Pandora spectrometers (to 11–18%), with the satellite biased low when pollution levels are higher; (3) in general, NO2 measured in situ and in column amounts by Pandora or TROPOMI is greater over coastal Louisiana than over the OCS; (4) the extent to which Pandora or satellite measurements correlate with surface NO2 is highly variable.

NO2↗
NASA NTRS2017

Thermophysical Properties of Cold and Vacuum Plasma Sprayed Cu-Cr-X Alloys, NiAl and NiCrAlY Coatings: Electrical and Thermal Conductivity, Thermal Diffusivity, and Total Hemispherical Emissivity - Part 1

This two-part paper reports the thermophysical properties of several cold and vacuum plasma sprayed monolithic Cu and Ni-based alloy coatings. Part I presents the electrical and thermal conductivity, thermal diffusivity, and total hemispherical emissivity data while Part II reports the specific heat capacity data for these coatings. Metallic copper alloys, stoichiometric NiAl and NiCrAlY coatings were fabricated by either the cold sprayed or the vacuum plasma spray deposition processes for thermal property measurements between 77 and 1223 K. The temperature dependencies of the thermal conductivities, thermal diffusivities, electrical conductivities and total hemispherical emissivities of these cold and vacuum sprayed monolithic coatings are reported in this paper. The electrical and thermal conductivity data correlate reasonably well for Cu-8%Cr-1%Al, Cu-23%Cr-5%Al and NiAl in accordance with the Wiedemann-Franz (WF) law although a better fit is obtained using the Smith-Palmer relationship. The Lorentz numbers determined from the WF law are close to the theoretical value.

Raj, S. V.↗
NASA NTRS1978

Experimental study of the effect of cycle pressure on lean combustion emissions

Experiments were conducted in which a stream of premixed propane and air was burned under conditions representative of gas turbine operation. Emissions of NOx, CO, and unburned hydrocarbons (UHC) were measured over a range of combustor inlet temperature, pressure, and residence time at equivalence ratios from 0.7 down to the lean stability limit. At an inlet temperature of 600 K, observed NOx levels dropped markedly with decreasing pressure for pressures below 20 atm. The NOx levels are proportional to combustor residence time and formation rates were principally a function of adiabatic flame temperature. For adiabatic flame temperatures of 2050 K and higher, CO reached chemical equilibrium within 2 msec. Unburned hydrocarbon species dropped to a negligible level within 2 msec regardless of inlet temperature, pressure, or equivalence ratio. For a combustor residence time of 2.5 msec, combustion inefficiency became less than 0.01% at an adiabatic flame temperature of 2050 K. The maximum combustion inefficiency observed was on the order of 1% and corresponded to conditions near the lean stability limit. Using a perforated plate flameholder, this limit is well represented by the condition of 1800 K adiabatic flame temperature.

Roffe, G.↗