Search NASA⌕ Search

SEARCH · Search NASA

Results for “Constrained regression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Predicting LANDSAT MSS endmember signatures from corresponding higher resolution TM fraction images

The approach to predicting Landsat Multispectral Scanner System (MSS) endmember signatures from fraction images derived from high resolution Landsat Thematic Mapper (TM) data is presented. The purpose, conducted in the Mogi-Guacu study site located in Sao Paulo State, Brazil, was to determine if information derived from a mixture model applied to higher resolution TM data could serve as ground truth for the lower resolution MSS sensor. The Constrained Least Squares (CLS) method was used to generate vegetation, soil, and shade fraction images from the TM data. The resulting images were then used to estimate the endmember spectral response for MSS data by regressing each MSS spectral channel against the corresponding proportion values estimated for the same resolution cells from the TM mixture model. The evaluation of the predicted signatures was performed by comparing the corresponding fraction images derived from both the MSS and TM data acquired on 14 Sep. 1986. The techniques serves as a potential tool for integrating information in global studies where remote sensors with different spectral and spatial resolutions were used.

Shimabukuro, Yosio E.↗

Constrained optimization using design of experiment surfaces

An algorithm for solving constrained optimization problems is presented. First, design of experiment techniques are used to survey the design space. After evaluating the objective and constraint functions, as specified by Taguchi orthogonal arrays, analytical models of these functions are generated using a least-squares regression analysis. Next, a nonlinear programming package is used to optimize the analytical model. Based on the optimization information, the design space is reduced so as to close in around the minimum, and the entire procedure is repeated until convergence. An important feature of the algorithm is that function gradients are not required; therefore, for problems in which gradients would have to be estimated using finite-differences the number of function evaluations required for the optimization is significantly reduced, when compared with traditional nonlinear programming techniques. In addition, there is no requirement that the gradients must be smooth and continuous.

Bolt, Marvin Vance↗

Hybrid Propulsion In-Situ Resource Utilization Test Facility Results for Performance Characterization

Hybrid propulsion presents a promising alternative to conventional systems for in-space propulsion applications using In-Situ Propellant Production (ISPP). A hybrid propulsion test facility has been built at the NASA Jet Propulsion Laboratory (JPL) with the capability of evaluating ISPP oxidizers (gaseous mixtures of O2 and CO2) and modifying fuel type and chamber geometry. This work is the result of a continuing e ort at JPL to characterize the burn characteristics and performance of different propellant combinations and motor configurations in order to re ne and support preliminary designs. Twelve tests using gaseous oxygen and two paraffin based fuels (Black Paraffin and SP1X) from the 2015 campaign are presented. Different reduction techniques are compared in an e ort to determine the uncertainty associated with deriving a regression rate law and evaluating c* efficiency with the collected data.Hybrid motors are mechanically and chemically simple propulsion systems that have the potential forlong-term storability with low gross mass. The oxidizer (such as gaseous O2) can be produced in-situ,signicantly reducing the landed mass. The solid, inert fuel is stored in the combustion chamber in its most dense state, further reducing the total structural mass and volume. Considerable eorts have been focusedon ISPP for Environmental Control and Life Support Systems (ECLSS) and human exploration of Mars.At optimum oxidizer to fuel ratio (O/F), about 70% of the total propellant mass could be produced in-situ.Paran based fuels exhibit a fast regression rate behavior due to the formation of a thin liquid layer on thefuel surface.1 A high burn rate is necessary in order to reach a medium to high thrust range. In order toachieve an O/F ratio close to optimum performance (between 2.1 and 2.7 for the O2/Paran combination),the fuel mass ow needs to be suciently large compared to the oxidizer ow. The slow regression rateof classical hybrid rocket fuels leads to long fuel grain designs or complicated multi-port structures. Singleport, high regression rate fuels have the potential to reduce residual propellant mass and have a grainlength to diameter ratio (L/D) more favorable for packaging. However, hybrid motors remain at a fairly lowTechnology Readiness Level (TRL), and solutions to accurately measure and increase performance are stilllacking, especially for small-scale motors that are constrained to tight packaging.A total of 12 hotres were performed and analyzed in this campaign. All of these tests were conductedat pressures above the critical pressure of paran wax, approximately 6.7 bar (97 psi).2 Three dierentmotor congurations were explored while conserving a single cylindrical port fuel grain. Additionally, sincethrottling is a crucial advantage of hybrid rocket propulsion systems, low oxidizer mass ows (60 - 100 g/s)and uxes (5 - 30 g/cm2/s) were investigated to determine the performance impact in this regime.

Mechentel, F. S.↗

Fluctuation history of Great Salt Lake, Utah, during the last 13,000 years, part 2

Great Salt Lake level fluctuations from 13,000 yr B.P. to the present were interpreted by examination of shoreline geomorphic features, shoreline deposits, archeologic sites, isotopic data, and palynologic data. After the conclusion of the Bonneville paleolake cycle, between 13,000 and 12,000 yr B.P. the lake regressed to levels low enough to deposit a littoral oxidized red bed stratum and a pelagic Glauber's salt layer. A late Pleistocene lake cycle occurred between 12,000 and 10,000 yr B.P. depositing several beaches, the highest reaching an altitude of about 4250 ft (1295.3 m). The lake regressed after 10,000 yr B.P., only to rise to 4230 ft (1289.2 m) between 9700 and 9400 yr B.P. and then gradually lower at least 15 ft (4.5 m) or more. Lake levels fluctuated between 4212 and 4180 ft (1284 and 1274 m) for the next 4000 years. A late Holocene lake cycle, constrained by radiocarbon ages between 3440 and 1400 yr B.P., is reported at a highest static level of 4221 ft (1286.5 m). After a lake level drop to altitudes ranging between 4210 and 4205 ft (1283.2 and 1281.6 m), a 4217 ft (1285.7 m) level was reached after 400 yr B.P. This level lowered to 4214 ft (1284.4 m) in the mid to late 1700 s A.D. The lake levels have since stabilized aroung a 4200 ft (1280 m) mean.

Murchison, Stuart B.↗

Modeling Whitecaps on Global Scale

Whitecaps play an important role in the surface-atmosphere interactions across the ocean. They are directly linked to the energy dissipation rate during wave breaking and transfer of heat, momentum, and gas/aerosol exchange from the wind to the sea surface. Although the first models of W were dependent only on wind speeds, a large number of diverse models based on wind and sea state which include wave height, wave age, friction velocity, and stability effects have been proposed since then. However, it is recognized that most of the proposed W models have strong systematic (e.g., zonal bias) and random errors when compared against observations. This is partly due to the differences in environmental conditions, measurement techniques, and geographical locations among these studies. But, some of these biases are linked to the inability of the proposed models to capture the variability in W in certain wind/wave regimes. Despite the knowledge of existing biases, W residual relationships from the models with wind and wave fields remain highly uncertain, with residual trends varying between the published studies. Here, we take advantage of the availability of relatively dense observations of W from WindSat microwave satellite retrievals in combination with the University of Miami wave model which was recently incorporated within the NASA GMAO/GEOS system (GEOS-UMWM). We use Windsat W retrievals to assess and constrain the previously published W models and understand the relationships of residuals from models in different wind/wave regimes. We link these unexplained residual variations to additional factors such as swell index, drag coefficient etc and add information to the existing whitecap models. Since Windsat retrievals cover wide range of environmental conditions, it helps to reduce the uncertainties associated with differences in measurement techniques. Regression of wind-wave fields against all Windsat data points (CTL) results in larger residuals for lower wave age and W is overestimated upto ~4% for wave age < 10 and underestimated by upto ~2% as wave age increases. We attest to this bias by considering two approaches. One is to perform regression separately for different stages of wave development such as developing sea, fully developed, and wind sea regimes thereby understanding the sensitivity of regression coefficients to sea state (EXP1). Another is to derive coefficients of W models in EXP1 as a function of additional wind/wave factors such as swell index, drag coefficient, and mean squared slope, deriving more nonlinear W models (EXP2). EXP2 provides reduction in Root Mean Squared Error (RMSE) by 0.1-0.3%. Sea surface drag has a stronger relationship with regression coefficients compared to swell index.These additional factors provide improved parameterizations in different wind and wave age regimes, with smaller unexplained/residual variations in W that has been a major concern in the W community.

Raman, Aishwarya↗

TPSAS-NF1676L-17943-DND

SAGE II used the solar occultation technique to measure atmospheric ozone for 21 years between 1984 and 2005 and has continued to play a key role in numerous international assessments. Traditionally, the determination of trends in ozone using SAGE II data has been done via time series analysis of monthly mean data within specific latitude bands. However, given the sparse sampling of SAGE II data, this will introduce temporal and/or spatial biases, particularly in the period after late 2000 when the instrument operated at half-duty cycle. Herein we present a new method for performing time series analysis of unevenly sampled data (in particular SAGE II); namely, we utilize the daily mean data and perform a simultaneous temporal and spatial analysis, making use of a Fourier series to constrain latitudinal variation. This methodology is applied to both the previous (v6.2) and current (v7.0) versions of the SAGE II data. Results are discussed that show the improvements to the data between versions 6.2 and 7.0 that make time series analysis produce reduced residuals as well as the preliminary results of the time series itself, which reveal some of the limitations in currently used proxies for the regression.

Robert P Damadeo↗

The Southern Ocean Sea Surface Temperature Response to Ozone Depletion: A Multi-Model Comparison

The effect of the Antarctic ozone hole extends downwards from the stratosphere, with clear signatures in surface weather patterns including a positive trend in the Southern Annular Mode (SAM). Several recent studies have used coupled climate models to investigate the impact of these changes on Southern Ocean sea surface temperature (SST), notably motivated by the observed cooling from the late 1970s. Here we examine the robustness of these model results through comparison of both previously published and new simulations. We focus on the calculation of ‘climate response functions' (CRFs), transient responses to an instantaneous step-change in ozone concentrations. The CRF for most models consists of a rapid cooling of SST, followed by a slower warming trend. However, inter-model comparison reveals large uncertainties, such that even the sign of the impact of ozone depletion on historical SST, when reconstructed from the CRF, remains unconstrained. Comparison of these CRFs with SST responses to a hypothetical step-change in the SAM, inferred through lagged linear regression, shows broadly similar results. Causes of uncertainty are explored by examining relationships between model climatologies and their CRFs. The inter-model spread in CRFs can be reproduced by varying a single subgrid-scale mixing parameter within a single model. Antarctic sea-ice CRFs are also calculated: these do not generally exhibit the two-time-scale behavior of SST, suggesting a complex relationship between the two. Finally, by constraining model climatology-response relationships with observational values, we conclude that ozone depletion in unlikely to have been the primary driver of the observed SST cooling trend.

Climate response functions (CRF)↗

Space Shuttle Main Engine performance analysis

For a number of years, NASA has relied primarily upon periodically updated versions of Rocketdyne's power balance model (PBM) to provide space shuttle main engine (SSME) steady-state performance prediction. A recent computational study indicated that PBM predictions do not satisfy fundamental energy conservation principles. More recently, SSME test results provided by the Technology Test Bed (TTB) program have indicated significant discrepancies between PBM flow and temperature predictions and TTB observations. Results of these investigations have diminished confidence in the predictions provided by PBM, and motivated the development of new computational tools for supporting SSME performance analysis. A multivariate least squares regression algorithm was developed and implemented during this effort in order to efficiently characterize TTB data. This procedure, called the 'gains model,' was used to approximate the variation of SSME performance parameters such as flow rate, pressure, temperature, speed, and assorted hardware characteristics in terms of six assumed independent influences. These six influences were engine power level, mixture ratio, fuel inlet pressure and temperature, and oxidizer inlet pressure and temperature. A BFGS optimization algorithm provided the base procedure for determining regression coefficients for both linear and full quadratic approximations of parameter variation. Statistical information relative to data deviation from regression derived relations was also computed. A new strategy for integrating test data with theoretical performance prediction was also investigated. The current integration procedure employed by PBM treats test data as pristine and adjusts hardware characteristics in a heuristic manner to achieve engine balance. Within PBM, this integration procedure is called 'data reduction.' By contrast, the new data integration procedure, termed 'reconciliation,' uses mathematical optimization techniques, and requires both measurement and balance uncertainty estimates. The reconciler attempts to select operational parameters that minimize the difference between theoretical prediction and observation. Selected values are further constrained to fall within measurement uncertainty limits and to satisfy fundamental physical relations (mass conservation, energy conservation, pressure drop relations, etc.) within uncertainty estimates for all SSME subsystems. The parameter selection problem described above is a traditional nonlinear programming problem. The reconciler employs a mixed penalty method to determine optimum values of SSME operating parameters associated with this problem formulation.

Santi, L. Michael↗

The Ozone–Climate Penalty Over South America and Africa By 2100

Climate change has the potential to increase surface ozone (O3) concentrations, known as the “ozone–climate penalty”, through changes to atmospheric chemistry, transport and dry deposition. In the tropics, the response of surface O3 to changing climate is relatively understudied but has important consequences for air pollution and human and ecosystem health. In this study, we evaluate the change in surface O3 due to climate change over South America and Africa using three state-of-the-art Earth system models that follow the Shared Socioeconomic Pathway 3-7.0 emission scenario from CMIP6. In order to quantify changes due to climate change alone, we evaluate the difference between simulations including climate change and simulations with a fixed present-day climate. We find that by 2100, models predict an ozone–climate penalty in areas where O3 is already predicted to be high due to the impacts of precursor emissions, namely urban and biomass burning areas, although on average, models predict a decrease in surface O3 due to climate change. We identify a small but robust positive trend in annual mean surface O3 over polluted areas. Additionally, during biomass burning seasons, seasonal mean O3 concentrations increase by 15 ppb (model range 12 to 18 ppb) in areas with substantial biomass burning such as the arc of deforestation in the Amazon. The ozone–climate penalty in polluted areas is shown to be driven by an increased rate of O3 chemical production, which is strongly influenced by NOx concentrations and is therefore specific to the emission pathway chosen. Multiple linear regression finds the change in NOx concentration to be a strong predictor of the change in O3 production, whereas increased isoprene emission rate is positively correlated with increased O3 destruction, suggesting NOx-limited conditions over the majority of tropical Africa and South America. However, models disagree on the role of climate change in remote, low-NOx regions, partly because of significant differences in NOx concentrations produced by each model. We also find that the magnitude and location of the ozone–climate penalty in the Congo Basin has greater inter-model variation than that in the Amazon, so further model development and validation are needed to constrain the response in central Africa. We conclude that if the climate were to change according to the emission scenario used here, models predict that forested areas in biomass burning locations and urban populations will be at increasing risk of high O3 exposure, irrespective of any direct impacts on O3 via the prescribed emission scenario.

Surface ozone↗

Machine Learning Applications to Metal-Silicate Equilibria and their Insights into Core Formation

An extensive number of studies have experimentally investigated how elements distribute between metal and silicate phases, to better constrain core-mantle chemical equilibrium. Here, we present a new database compiling all (to our knowledge) experimental data on liquid metal-silicate partitioning from 118 peer-reviewed publications. We applied various machine learning techniques to gain further insights into these partitioning equilibria and their dependencies. We performed a network analysis to investigate the relationship between experiments and partition coefficients, which enables visualizing gaps in the experimental dataset and biases related to varying experimental conditions and analytical setup. In addition, semi-empirical thermodynamic models are commonly used to extrapolate these chemical reactions to the wide range of pressure, temperature and compositional conditions of planetary differentiation. These models are based on linear regressions that assume continuous relationship between partition coefficients and experimental variables. Here, we considered random forest regressions, which are algorithms based on ensembles of decision trees and does not consider continuous effects of each variable. The application of this regression significantly improves the prediction of metal-silicate partitioning for several elements including Ni, Si and Cr. We will show how this new approach improves our understanding of elemental exchange between metal and silicate and their implications for the Earth’s core formation.

siderophile element↗

Integrated design and manufacturing for the high speed civil transport (a combined aerodynamics/propulsion optimization study)

This report documents the efforts of a Georgia Tech High Speed Civil Transport (HSCT) aerospace student design team in completing a design methodology demonstration under NASA's Advanced Design Program (ADP). Aerodynamic and propulsion analyses are integrated into the synthesis code FLOPS in order to improve its prediction accuracy. Executing the integrated product and process development (IPPD) methodology proposed at the Aerospace Systems Design Laboratory (ASDL), an improved sizing process is described followed by a combined aero-propulsion optimization, where the objective function, average yield per revenue passenger mile ($/RPM), is constrained by flight stability, noise, approach speed, and field length restrictions. Primary goals include successful demonstration of the application of the response surface methodolgy (RSM) to parameter design, introduction to higher fidelity disciplinary analysis than normally feasible at the conceptual and early preliminary level, and investigations of relationships between aerodynamic and propulsion design parameters and their effect on the objective function, $/RPM. A unique approach to aircraft synthesis is developed in which statistical methods, specifically design of experiments and the RSM, are used to more efficiently search the design space for optimum configurations. In particular, two uses of these techniques are demonstrated. First, response model equations are formed which represent complex analysis in the form of a regression polynomial. Next, a second regression equation is constructed, not for modeling purposes, but instead for the purpose of optimization at the system level. Such an optimization problem with the given tools normally would be difficult due to the need for hard connections between the various complex codes involved. The statistical methodology presents an alternative and is demonstrated via an example of aerodynamic modeling and planform optimization for a HSCT.

Baecher, Juergen↗

Describing functional requirements for knowledge sharing communities

Human collaboration in distributed knowledge sharing groups depends on the functionality of information and communication technologies (ICT) to support performance. Since many of these dynamic environments are constrained by time limits, knowledge must be shared efficiently by adapting the level of information detail to the specific situation. This paper focuses on the process of knowledge and context sharing with and without mediation by ICT, as well as issues to be resolved when determining appropriate ICT channels. Both technology-rich and non-technology examples are discussed.

NASA Discipline Space Human Factors↗

Constraining Arctic Climate Projections of Wintertime Warming With Surface Turbulent Flux Observations and Representation of Surface-Atmosphere Coupling

The drivers of rapid Arctic climate change—record sea ice loss, warming SSTs, and a lengthening of the sea ice melt season—compel us to understand how this complex system operates and use this knowledge to enhance Arctic predictability. Changing energy flows sparked by sea ice decline, spotlight atmosphere-surface coupling processes as central to Arctic system function and its climate change response. Despite this, the representation of surface turbulent flux parameterizations in models has not kept pace with our understanding. The large uncertainty in Arctic climate change projections, the central role of atmosphere-surface coupling, and the large discrepancy in model representation of surface turbulent fluxes indicates that these processes may serve as useful observational constraints on projected Arctic climate change. This possibility requires an evaluation of surface turbulent fluxes and their sensitivity to controlling factors (surface-air temperature and moisture differences, sea ice, and winds) within contemporary climate models (here Coupled Model Intercomparison Project 6). The influence of individual controlling factors and their interactions is diagnosed using a multi-linear regression approach. This evaluation is done for four sea ice loss regimes, determined from observational sea ice loss trends, to control for the confounding effects of natural variability between models and observations. The comparisons between satellite- and model-derived surface turbulent fluxes illustrate that while models capture the general sensitivity of surface turbulent fluxes to declining sea ice and to surface-air gradients of temperature and moisture, substantial mean state biases exist. Specifically, the central Arctic is too weak of a heat sink to the winter atmosphere compared to observations, with implications to the simulated atmospheric circulation variability and thermodynamic profiles. Models were found to be about 50% more efficient at turning an air-sea temperature gradient anomaly into a sensible heat flux anomaly relative to observations. Further, the influence of sea ice concentration on the sensible heat flux is underestimated in models compared to observations. The opposite is found for the latent heat flux variability in models; where the latent heat flux is too sensitive to a sea ice concentration anomaly. Lastly, the results suggest that present-day trends in sea ice retreat regions may serve as suitable observational constraints of projected Arctic warming.

turbulent fluxes↗

Core-Mantle Fractionation of Carbon in Earth and Mars: the Effects of Sulfur

Constraining carbon (C) fractionation between silicate magma ocean (MO) and core-forming alloy liquid during early differentiation is essential to understand the origin and early distribution of C between reservoirs such as the crust-atmosphere, mantle, and core of Earth and other terrestrial planets. Yet experimental data at high pressure (P)-temperature (T) on the effect of other light elements such as sulfur (S) in alloy liquid on alloy-silicate partitioning of C and C solubility in Fe-alloy compositions relevant for core formation is lacking. Here we have performed multi-anvil experiments at 6–13 GPa and 1800–2000 °C to examine the effects of S and Ni on the solubility limit of C in Fe-rich alloy liquid as well as partitioning behavior of C between alloy liquid and silicate melt (𝐷𝐷(sub C)(sup alloy/silicate)). The results show that C solubility in the alloy liquid as well as 𝐷𝐷(sub C)(sup alloy/silicate) decreases with increasing in S content in the alloy liquid. Empirical regression on C solubility in alloy liquid using our new experimental data and previous experiments demonstrates that C solubility significantly increases with increasing temperature, whereas unlike in S-poor or S-free alloy compositions, there is no discernible effect of Ni on C solubility in S-rich alloy liquid. Our modelling results confirm previous findings that in order to satisfy the C budget of BSE, the bulk Earth C undergoing alloy-silicate fractionation needs to be as high as those of CI-type carbonaceous chondrite, i.e., not leaving any room for volatility-induced loss of carbon during accretion. For Mars, on the other hand, an average single-stage core formation at relatively oxidized conditions (1.0 log unit below IW buffer) with 10-16 wt.% S in the core could yield a Martian mantle with a C budget similar to that of Earth’s BSE for a bulk C content of ~0.25-0.9 wt.%. For the scenario where C was delivered to the proto-Earth by a S-rich differentiated impactor at a later stage, our model calculations predict that bulk C content in the impactor can be as low as ~0.5 wt.% for an impactor mass that lies between 9-20% of present day Earth’s mass. This value is much higher than 0.05-0.1 wt.% bulk C in the impactor predicted by Li et al. (2016) because C-solubility limit of 0.3 wt.% in a S-rich alloy predicted by their models is significantly lower than the experimentally derived C-solubility of ~1.6 wt. % for the relevant S-content in the core of the impactor.

Carbon↗

New Data-Driven Estimation of Terrestrial CO2 Fluxes in Asia Using a Standardized Database of Eddy Covariance Measurements, Remote Sensing Data, and Support Vector Regression

The lack of a standardized database of eddy covariance observations has been an obstacle for data-driven estimation of terrestrial carbon dioxide fluxes in Asia. In this study, we developed such a standardized database using 54 sites from various databases by applying consistent postprocessing for data-driven estimation of gross primary productivity (GPP) and net ecosystem carbon dioxide exchange (NEE). Data-driven estimation was conducted by using a machine learning algorithm: support vector regression (SVR), with remote sensing data for 2000 to 2015 period. Site-level evaluation of the estimated carbon dioxide fluxes shows that although performance varies in different vegetation and climate classifications, GPP and NEE at 8 days are reproduced (e.g., r (exp 2) =0.73 and 0.42 for 8 day GPP and NEE). Evaluation of spatially estimated GPP with Global Ozone Monitoring Experiment 2 sensor-based Sun-induced chlorophyll fluorescence shows that monthly GPP variations at subcontinental scale were reproduced by SVR (r (exp 2)=1.00, 0.94, 0.91, and 0.89 for Siberia, East Asia, South Asia, and Southeast Asia, respectively). Evaluation of spatially estimated NEE with net atmosphere-land carbon dioxide fluxes of Greenhouse Gases Observing Satellite (GOSAT) Level 4A product shows that monthly variations of these data were consistent in Siberia and East Asia; meanwhile, inconsistency was found in South Asia and Southeast Asia. Furthermore, differences in the land carbon dioxide fluxes from SVR-NEE and GOSAT Level 4A were partially explained by accounting for the differences in the definition of land carbon dioxide fluxes. These data-driven estimates can provide a new opportunity to assess carbon dioxide fluxes in Asia and evaluate and constrain terrestrial ecosystem models.

chlorophyll fluorescence↗

Human interactions in space: results from Shuttle/Mir

Background: Anecdotal reports from space and results from simulation studies on Earth have suggested that space crewmembers may experience decrements in their interpersonal environment over time and may displace tension and dysphoria to mission control personnel. Methods: To evaluate these issues, we studied 5 American astronauts, 8 Russian cosmonauts, and 42 American and 16 Russian mission control personnel who participated in the Shuttle/Mir space program. Subjects completed questions from subscales of the Profile of Mood States, the Group Environment Scale, and the Work Environment Scale on a weekly basis before, during, and after the missions. Results: Among the crewmembers, there was little evidence for significant time effects based on triphasic (U-shaped) or linear models for the 21 subscales tested, although the presence of an initial novelty effect that declined over time was found in three subscales for the astronauts. Compared with work groups on Earth, the crewmembers reported less dysphoria and perceived their crew environment as more constraining, cohesive, and guided by leadership. There was no change in ratings of mood and interpersonal environment before, during, and after the missions. Conclusions: There was little support for the presence of a moderate to strong time effect that influenced the space crews. Crewmembers perceived their work environment differently from people on Earth, and they demonstrated equanimity in mood and group perceptions, both in space and on the ground. Grant numbers: NAS9-19411. c 2001. Elsevier Science Ltd. All rights reserved.

Soyuz Project↗

Estimation of Snow Mass Information via Assimilation of C-Band Synthetic Aperture Radar Backscatter Observations Into an Advanced and Surface Model

This study assimilated Sentinel-1 C-band backscatter observations over snow-covered terrain into the Noah-Multiparameterization land surface model using support vector machine (SVM) regression and an ensemble Kalman filter to improve the modeled terrestrial snow mass estimates. The data assimilation (DA) experiment was conducted across Western Colorado from September 2016 to August 2017. As part of the DA experiments, the impact of a rule-based update was evaluated by comparing snow water equivalent (SWE) estimates via DA (with [ DAv1 ] and without [ DAv2 ] the rule-based update) against SNOTEL SWE measurements. Results confirmed that rule-based update helped minimize SVM controllability issues, and in turn, improved the accuracy of SWE estimates relative to both open loop (OL) and DAv2 . Comparison of SWE estimates from Sentinel-1 DAv1 against SNOTEL SWE revealed that 75% of stations showed improvements in bias and correlation coefficient relative to the OL. Assimilated SWE estimates also showed statistical improvements during both the snow accumulation and snow ablation periods. However, unbiased root mean square error showed a slight increase during the snow ablation period due to the large variability in the electromagnetic response of C-band backscatter over deep and/or wet snow. Improvement of the SWE estimates also resulted in improving river discharge estimates compared to in situ measurements. River discharge using Sentinel-1 DAv1 improved the Nash–Sutcliffe efficiency at all available stations. These results suggest that physically constrained SVM can serve as an efficient observation operator for snow mass DA through explicit consideration of the first-order C-band scattering mechanisms over different terrestrial snow conditions.

Jongmin Park↗

Aerosol Midlatitude Cyclone Indirect Effects in Observations and High-Resolution Simulations

Aerosol-cloud interactions are a major source of uncertainty in inferring the climate sensitivity from the observational record of temperature. The adjustment of clouds to aerosol is a poorly constrained aspect of these aerosol-cloud interactions. Here, we examine the response of midlatitude cyclone cloud properties to a change in cloud droplet number concentration (CDNC). Idealized experiments in high-resolution, convection-permitting global aquaplanet simulations with constant CDNC are compared to 13 years of remote-sensing observations. Observations and idealized aquaplanet simulations agree that increased warm conveyor belt (WCB) moisture flux into cyclones is consistent with higher cyclone liquid water path (CLWP). When CDNC is increased a larger LWP is needed to give the same rain rate. The LWP adjusts to allow the rain rate to be equal to the moisture flux into the cyclone along the WCB. This results in an increased CLWP for higher CDNC at a fixed WCB moisture flux in both observations and simulations. If observed cyclones in the top and bottom tercile of CDNC are contrasted it is found that they have not only higher CLWP but also cloud cover and albedo. The difference in cyclone albedo between the cyclones in the top and bottom third of CDNC is observed by CERES to be between 0.018 and 0.032, which is consistent with a 4.6-8.3 Wm(exp -2) in-cyclone enhancement in upwelling shortwave when scaled by annual-mean insolation. Based on a regression model to observed cyclone properties, roughly 60% of the observed variability in CLWP can be explained by CDNC and WCB moisture flux.

Mccoy, Daniel T.↗