Results for “Consultative Committee for Space Data Systems” — Page 2

NASA NTRS1990

Multi-mission space science data processing systems - Past, present, and future

Packetized telemetry that is consistent with the international Consultative Committee for Space Data Systems (CCSDS) has been baselined for future NASA missions such as Space Station Freedom. Some experiences from past and present multimission systems are examined, including current experiences in implementing a CCSDS standard packetized data processing system, relative to the effectiveness of the multimission approach in lowering life cycle cost and the complexity of meeting new mission needs. It is shown that the continued effort toward standardization of telemetry and processing support will permit the development of multimission systems needed to meet the increased requirements of future NASA missions.

Stallings, William H.↗

NASA NTRS2021

RealTOR TechPort Info

NASA is continuously working to advance optical communications technologies to meet the demand for higher communications data rates by developing and testing low cost ground-based optical receivers for space-to-ground communications required for future space explorations systems such as Artemis and Lunar Gateway Programs. The Real Time Optical Receiver (RealTOR) Project’s goal is to provide a commercial-off-the-shell (COTS) portable, scalable, modular, low cost solution for optical communications ground photon counting receivers. The RealTOR system implements the Consultative Committee for Space Data Systems (CCSDS) Optical Communications High Photon Efficiency (HPE) standard, which will be used in future photon counting missions such as the Optical Artemis-2 Orion Communications (O2O) mission.

optical communications↗

NASA NTRS2021

Truncated ARQ Statistical Link Analysis for Dynamic Links

The future deep space links are migrating towards higher frequency bands such as Ka band and optical. These links are susceptible to non Gaussian and non linear effects such as atmospheric turbulence, scintillation, antenna mis-pointing, jitter, etc. These dynamic links thus will experience various degrees of fading loss, and some of these link disruptions cannot be effectively mitigated by forward error correction coding and/or interleaving. One effective way to ensure reliable communication is by using Automatic Repeat Request (ARQ) protocol, where the receiver acknowledges to the transmitter whether or not a data unit is successfully received. If a data unit is not successfully received (such as after a pre-set time-out), the transmitter would then re-transmit the lost data unit to the receiver. In a previous paper, we derived a statistical link analysis method of finding the optimal operating Signal-to-Noise Ratio (SNR) and estimating the latency of an ARQ scheme. In a more recent paper, we demonstrated the above method using the SNR distribution constructed from the Ka-band (32 GHz) flight data. To simplify the discussion, we considered the academic approach that the ARQ scheme allows for an infinite number of retransmissions. In this paper, we consider the more practical case of a truncated ARQ scheme, where there is a limit on the number of retransmissions. We derive the error probability, the optimal SNR setting, and the latency statistics of the correctly received frames of the truncated ARQ schemes. We first discuss the truncated ARQ link analysis principles using the Gaussian assumption for SNR distribution with a large variance. Next, we demonstrate the statistical truncated ARQ link analysis using the SNR distribution constructed from the Ka-band flight data. The results in this paper can be applied in the design of reliable communication systems such as the Consultative Committee for Space Data System (CCSDS) File Transfer Protocol (CFTP) and the Delay Tolerant Network (DTN).

Morabito, David↗

NASA NTRS2006

Toward a Framework for Modeling Space Systems Architectures

In this paper we will describe this extended RASDS/RAMSS methodology, the set of viewpoints that we have derived, and describe their relationship to RM-ODP. While this methodology may be directly used in a variety of document driven ways to describe space system architecture, the real power of it will come when there are tools available that will support full description of system architectures that can be captured electronically in a way that permits their analysis, verification, and transformation.

cost savings↗

NASA NTRS1991

Services, architectures, and protocols for space data systems

The author presents a comprehensive discussion of three major aspects of the work of the Consultative Committee for Space Data Systems (CCSDS), a worldwide cooperative effort of national space agencies. The author examines the CCSDS space data communications network concept on which the data communications facilities of future advanced orbiting systems will be based. He derives the specifications of an open communications architecture as a reference model for the development of services and protocols that support the transfer of information over space data communications networks. Detailed specifications of the communication services and information transfer protocols that have reached a high degree of maturity and stability are offered. The author also includes a complete list of currently available CCSDS standards and supporting documentation.

Helgert, Hermann J.↗

NASA NTRS2012

Real-Time Adaptive Lossless Hyperspectral Image Compression using CCSDS on Parallel GPGPU and Multicore Processor Systems

The proposed CCSDS (Consultative Committee for Space Data Systems) Lossless Hyperspectral Image Compression Algorithm was designed to facilitate a fast hardware implementation. This paper analyses that algorithm with regard to available parallelism and describes fast parallel implementations in software for GPGPU and Multicore CPU architectures. We show that careful software implementation, using hardware acceleration in the form of GPGPUs or even just multicore processors, can exceed the performance of existing hardware and software implementations by up to 11x and break the real-time barrier for the first time for a typical test application.

realtime↗

NASA NTRS1990

Data dictionaries in information systems - Standards, usage , and application

An overview of data dictionary systems and the role of standardization in the interchange of data dictionaries is presented. The development of the data dictionary for the Planetary Data System is cited as an example. The data element dictionary (DED), which is the repository of the definitions of the vocabulary utilized in an information system, is an important part of this service. A DED provides the definitions of the fields of the data set as well as the data elements of the catalog system. Finally, international efforts such as the Consultative Committee on Space Data Systems and other committees set up to provide standard recommendations on the usage and structure of data dictionaries in the international space science community are discussed.

Johnson, Margaret↗

NASA NTRS1986

Standard data systems architecture for the Space Station

Attention is given to an end-to-end Space Station Data System (SSDS) architecture which is based on internationally-recommended standards developed by the Consultative Committee for Space Data Systems (CCSDS). The proposed system uses simple modular building blocks that are recursively replicated and linked to construct essentially any desired data system configuration. The SSDS concept provides for a user-transparent data transport system which is entirely independent of the characteristics of the user data being transported, and in addition, has the flexibility to accommodate mission-induced changes in data traffic. SSDS physical elements include the following: (1) on-orbit local area networks, (2) space-to-ground, ground-to-space, and space-to-space data links, and (3) ground mission support facilities containing telemetry and telecommand data handling termini and preprocessing services.

Greenberg, E.↗

NASA NTRS1993

NASA/Goddard Space Flight Center's testbed for CCSDS compatible systems

A testbed for flight and ground systems compatible with the Consultative Committee for Space Data Systems (CCSDS) Recommendations has been developed at NASA's Goddard Space Flight Center. The subsystems of an end-to-end CCSDS based data system are being developed. All return link CCSDS telemetry services (except Internet) and both versions of the CCSDS frame formats are being implemented. In key areas of uncertainty, multiple design approaches are being performed. In addition, key flight-qualifiable hardware components, such as Reed-Solomon encoders, are being developed to complement the testbed element development. The testbed and its capabilities are described. The method of dissemination of the testbed results are given, as are plans to make the testbed capabilities available to outside users. Plans for the development of standardized conformance and compatibility tests are provided.

Carper, Richard D.↗

NASA NTRS1995

Incorporating CCSDS telemetry standards and philosophy on Cassini

The Cassini project at the Jet Propulsion Laboratory (JPL) is implementing a spacecraft telemetry system based on the Consultative Committee for Space Data Systems (CCSDS) packet telemetry standards. Resolving the CCSDS concepts with a Ground Data System designed to handle time-division-multiplexed telemetry and also handling constraints unique to a deep-space planetary spacecraft (such as fixed downlink opportunities, small downlink rates and requirements for on-board data storage) have resulted in spacecraft and ground system design challenges. Solving these design challenges involved adapting and extending the CCSDS telemetry standards as well as changes to the spacecraft and ground system designs. The resulting spacecraft/ground system design is an example of how new ideas and philosophies can be incorporated into existing systems and design approaches without requiring significant rework. In addition, it shows that the CCSDS telemetry standards can be successfully applied to deep-space planetary spacecraft.

Day, John C.↗

NASA NTRS1995

Incorporating CCSDS Telemetry Standards and Philosophy on Cassini

The Cassini project at the Jet Propulsion Laboratory (JPL) is implementing a spacecraft telemetry system based on the Consultative Committee for Space Data Systems (CCSDS) packet telemetry standards. Resolving the CCSDS concepts with a Ground Data System designed to handle time-division-multiplexed telemetry and also handling constraints unique to a deep-space planetary spacecraft (such as fixed downlink opportunities, small downlink rates and requirements for on-board data storage) have resulted in spacecraft and ground system design challenges. Solving these design challenges involved adapting and extending the CCSDS telemetry standards as well as changes to the spacecraft and ground system designs. The resulting spacecraft/ground system design is an example of how new ideas and philosophies can be incorporated into existing systems and design approaches without requiring significant rework. In addition, it shows that the CCSDS telemetry standards can be successfully applied to deep-space planetary spacecraft.

CCSDS↗

NASA NTRSDate not supplied

Performance of A Real-Time Photon Counting Optical Receiver in the Presence of Emulated Channel Fading

Free-space optical communication links with terrestrial ground stations experience fading due to atmospheric scintillation and beam pointing. Fiber-coupled receiver systems experience additional fading at the interface between the fiber and free-space optics of the telescope. The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) has characterized a real-time photon-counting optical ground receiver system with an atmospheric fade emulation system. The receiver system is comprised of a fiber interconnect, an array of superconducting nanowire single photon detectors (SNSPDs), and a field programmable gate array (FPGA) based receive modem. Two fiber interconnect/detector architectures have been studied. One architecture uses a 70-mode photonic lantern coupled to seven single pixel SNSPDs. The other architecture uses a 10-mode few-mode fiber (FMF) coupled to a 15-pixel SNSPD array. The receiver system complies with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications High Photon Efficiency Coding and Synchronization Standard, which uses serially concatenated convolutionally coded pulse-position modulation (SCPPM). The CCSDS standard is designed for use in low photon flux missions, including the Orion Artemis-II Optical (O2O) communications demonstration. The standard utilizes a convolutional symbol interleaver which can be resized to mitigate different fades. The fade emulation system employed in this work emulates scintillation-induced, pointing-induced, and coupling-induced fading. This paper gives an overview of the real-time optical receiver system and the fade emulation system. It presents tests results which show the impact of fading on the performance on the receiver. The test results show that in the presence of channel fading, the 70-mode photonic lantern outperforms the 10-mode FMF under higher (D/r_0=9) turbulence conditions due to high fiber-coupling-induced fading and fiber coupling loss on the 10-mode FMF. When operating in lower turbulence (D/r_0=4), the 10-mode FMF outperforms the 70-mode photonic lantern. The paper also shows a larger convolutional interleaver improves the system performance as long as the receiver does not lose acquisition.

optical communications↗

NASA NTRSDate not supplied

Performance of a real-time photon counting optical receiver in the presence of emulated channel fading

Free-space optical communication links with terrestrial ground stations experience fading due to atmospheric scintillation and beam pointing. Fiber-coupled receiver systems experience additional fading at the interface between the fiber and free-space optics of the telescope. The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) has characterized a real-time photon-counting optical ground receiver system with an atmospheric fade emulation system. The receiver system is comprised of a fiber interconnect, an array of superconducting nanowire single photon detectors (SNSPDs), and a field programmable gate array (FPGA) based receive modem. Two fiber interconnect/detector architectures have been studied. One architecture uses a 70-mode photonic lantern coupled to seven single pixel SNSPDs. The other architecture uses a 10-mode few-mode fiber (FMF) coupled to a 15-pixel SNSPD array. The receiver system complies with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications High Photon Efficiency Coding and Synchronization Standard, which uses serially concatenated convolutionally coded pulse-position modulation (SCPPM). The CCSDS standard is designed for use in low photon flux missions, including the Orion Artemis-II Optical (O2O) communications demonstration. The standard utilizes a convolutional symbol interleaver which can be resized to mitigate different fades. The fade emulation system employed in this work emulates scintillation-induced, pointing-induced, and coupling-induced fading. This paper gives an overview of the real-time optical receiver system and the fade emulation system. It presents tests results which show the impact of fading on the performance on the receiver. The test results show that in the presence of channel fading, the 70-mode photonic lantern outperforms the 10-mode FMF under higher (D/r_0=9) turbulence conditions due to high fiber-coupling-induced fading and fiber coupling loss on the 10-mode FMF. When operating in lower turbulence (D/r_0=4), the 10-mode FMF outperforms the 70-mode photonic lantern. The paper also shows a larger convolutional interleaver improves the system performance as long as the receiver does not lose acquisition.

optical communications↗

NASA NTRS2014

A Space Data System Standard for Telerobotic Operations

The Telerobotics Working Group of the Mission Operations and Information Management Services Area of the Consultative Committee for Space Data Systems is drafting a document that will help bound the scope of an eventual international standard for telerobotic operations services. This paper will present the work in progress and provide background for how the international community is beginning to define standards in telerobotic operations that will help ensure the success of complex missions to explore beyond Earth orbit.

Mittman, David S.↗

NASA NTRS2016

In-Space Networking on NASA's SCAN Testbed

The NASA Space Communications and Navigation (SCaN) Testbed, an external payload onboard the International Space Station, is equipped with three software defined radios and a flight computer for supporting in-space communication research. New technologies being studied using the SCaN Testbed include advanced networking, coding, and modulation protocols designed to support the transition of NASAs mission systems from primarily point to point data links and preplanned routes towards adaptive, autonomous internetworked operations needed to meet future mission objectives. Networking protocols implemented on the SCaN Testbed include the Advanced Orbiting Systems (AOS) link-layer protocol, Consultative Committee for Space Data Systems (CCSDS) Encapsulation Packets, Internet Protocol (IP), Space Link Extension (SLE), CCSDS File Delivery Protocol (CFDP), and Delay-Tolerant Networking (DTN) protocols including the Bundle Protocol (BP) and Licklider Transmission Protocol (LTP). The SCaN Testbed end-to-end system provides three S-band data links and one Ka-band data link to exchange space and ground data through NASAs Tracking Data Relay Satellite System or a direct-to-ground link to ground stations. The multiple data links and nodes provide several upgradable elements on both the space and ground systems. This paper will provide a general description of the testbeds system design and capabilities, discuss in detail the design and lessons learned in the implementation of the network protocols, and describe future plans for continuing research to meet the communication needs for evolving global space systems.

space networks↗

NASA NTRS1996

Maximum ADPE Approach for a High Rate CCSDS Return Link Processing System

The earth observing system data and operations system (EDOS) multi-mission data processing and distribution system for the earth observing system is considered. The EDOS was based on the Consultative Committee for Space Data Systems (CCSDS) protocols. The development included the challenge of developing and demonstrating a 150 Mbps CCSDS return link processing capability for the support of the first EDOS delivery. The approach used general-purpose automated data processing equipment (ADPE) and minimized the use of customized hardware. The way in which the system was developed is described. The principle design decisions and the performance benchmark results are presented.

Krimchansky, Alexander↗

NASA NTRS1993

The advanced orbiting systems testbed program: Results to date

The Consultative Committee for Space Data Systems Recommendations for Packet Telemetry and Advanced Orbiting Systems (AOS) propose standard solutions to data handling problems common to many types of space missions. The Recommendations address only space/ground and space/space data handling systems. Goddard Space Flight Center's AOS Testbed (AOST) Program was initiated to better understand the Recommendations and their impact on real-world systems, and to examine the extended domain of ground/ground data handling systems. Central to the AOST Program are the development of an end-to-end Testbed and its use in a comprehensive testing program. Other Program activities include flight-qualifiable component development, supporting studies, and knowledge dissemination. The results and products of the Program will reduce the uncertainties associated with the development of operational space and ground systems that implement the Recommendations. The results presented in this paper include architectural issues, a draft proposed standardized test suite and flight-qualifiable components.

Newsome, Penny A.↗

NASA NTRS1994

The Advanced Orbiting Systems Testbed Program: Results to date

The Consultative Committee for Space Data Systems (CCSDS) Recommendations for Packet Telemetry (PT) and Advanced Orbiting Systems (AOS) propose standard solutions to data handling problems common to many types of space missions. The Recommendations address only space/ground and space/space data handling systems. Goddard Space Flight Center's (GSFC's) AOS Testbed (AOST) Program was initiated to better understand the Recommendations and their impact on real-world systems, and to examine the extended domain of ground/ground data handling systems. The results and products of the Program will reduce the uncertainties associated with the development of operational space and ground systems that implement the Recommendations.

Otranto, John F.↗