Search NASA⌕ Search

SEARCH · Search NASA

Results for “Convective mixing layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Simulation of turbulent mixing layers

A hybrid numerical scheme, combined with a scalar convection scheme, is used to compute turbulent mixing layers. The hybrid scheme is used to solve the vorticity equation by dividing the domain into two regions, applying a Lagrangian method in one region and an Eulerian method in the other. The scalar convection scheme is used to track an interface which separates a dyed fluid from a dye-free fluid, thereby distinguishing the fluid that starts on the high speed side from the fluid that starts on the low speed side. A two-dimensional mixing layer has been simulated using this new method; the roll up of a vortex sheet into structures that interact and pair is observed. The growth of the momentum thickness and the development of the mean turbulence statistics are found to be consistent with experimental observations. Forcing of the layer at moderate and low frequencies shows a dramatic effect on the growth of the momentum thickness and the entrainment ratio. Low frequency forcing enhances the growth of the layer; moderate frequency forcing inhibits the growth.

Mansour, N. N.↗
NASA NTRS1997

Enhancement of Mixing and Reaction in High-speed Combustor Flowfields

Research has been underway for a number of years, both in the United States and abroad, to develop advanced aerospace propulsion systems for use late in this century and beyond. One program is now underway at the NASA Langley Research Research has been underway for a number of years, both in the United States and abroad, to develop advanced aerospace propulsion systems for use late in this century and beyond. One program is now underway at the NASA Langley Research Center to develop a hydrogen-fueled supersonic combustion ramjet (scramjet) that is capable of propelling a vehicle at hypersonic speeds in the atmosphere. A part of that research has been directed toward the optimization of the scramjet combustor and, in particular, the efficiency of fuel-air mixing and reaction taking place in the engine. In the high-speed vehicle configurations currently being considered, achieving a high combustor efficiency becomes particularly difficult. With increasing combustor Mach number, the degree of fuel-air mixing that can be achieved through natural convective and diffusive processes is reduced leading to an overall decrease in combustion efficiency and thrust. Compressible shear layers and jets provide a good model for studying the physical processes occurring in high speed mixing and combustion in a scramjet. Mixing layers are characterized by large scale eddies that form due to the high shear that is present between the fuel and the air streams. These eddies entrain the fuel and air into the mixing region between the fluids leading to increased surface area and locally steep concentration gradients. Molecular diffusion then occurs across the strained interfaces. In an early study of high-speed mixing, Brown and Roshko show that the spreading rate of a supersonic mixing layer decreases with increasing Mach number, exhibiting a factor of three decrease in spread rate as compared with an incompressible mixing layer with the same density ratio. They conclude that the reduced spread rate is primarily due to compressibility. Papamoschou and Roshko also observe that the spreading rate of compressible mixing layers is significantly reduced over that of incompressible layers. To characterize the structure of the flow quantitatively, they define a convective Mach number. The reduction in mixing layer spreading rate is shown in these experiments to correlate well with increasing convective Mach number.

Drummond, J. Philip↗
NASA NTRS1991

A two-equation turbulence model for compressible reacting flows

A two-equation turbulence model (k-epsilon) has been modified to model compressible reacting flows. A compressibility correction model based on modeling the dilatational terms in the Reynolds stress equations has been used. Computations are carried out using the Navier-Stokes solver SPARK which includes a finite rate chemistry model for hydrogen-air combustion. Initially, planar compressible mixing layers are simulated. Comparisons of the predictions with available experimental data and the predictions of a compressible Reynolds stress closure indicate that the model is well suited for the study of such flows. The decrease in the growth rate of the mixing layer with increasing convective Mach number is well predicted. The model is then tested on a three-dimensional supersonic flow problem where solid boundaries are present. An axisymmetric nonreacting mixing layer flow involving dissimilar gases is evaluated next using the model and the predictions are compared with available experimental data. Finally, two reacting turbulent flow configurations have been studied and comparison of predictions and experimental data has been done. The comparisons indicate that the model predicts the overall features of the test cases very well.

Narayan, J. R.↗
NASA NTRS1993

Two-equation turbulence model for compressible reacting flows

A two-equation k-epsilon turbulence model is presently modified for applicability to compressible flows by adapting a compressibility correction model. Compressible mixing layer computations show that the reduced growth rate of the mixing layer with increasing convective Mach number is accurately predicted by these means. Preliminary studies of reacting mixing problems involving dissimilar gases show the model's suitability for application to such flows.

Narayan, J. R.↗
NASA NTRS1991

Computation of turbulent high speed mixing layers using a two-equation turbulence model

A two-equation turbulence model was extended to be applicable for compressible flows. A compressibility correction based on modelling the dilational terms in the Reynolds stress equations were included in the model. The model is used in conjunction with the SPARK code for the computation of high speed mixing layers. The observed trend of decreasing growth rate with increasing convective Mach number in compressible mixing layers is well predicted by the model. The predictions agree well with the experimental data and the results from a compressible Reynolds stress model. The present model appears to be well suited for the study of compressible free shear flows. Preliminary results obtained for the reacting mixing layers are included.

Narayan, J. R.↗
NASA NTRS1973

Turbulent correlation measurements in a two-stream mixing layer.

Two point space-time measurements of the axial component of fluctuating velocity were made using linearized hot-wire anemometry. Space scales, convected frame correlations and time scales, and convection velocities in the shear layer were evaluated. Both filtered narrow and broad band convected frame autocorrelations were determined. Differences between axial broad band convection velocities and both mean turbulence and mean entrained fluid velocities were observed. Scaled broad band convection velocities for the mixing layer and simple round jets were found to collapse to a common curve. Axial narrow band convection velocities showed strong frequency and transverse position dependence.

Jones, B. G.↗
NASA NTRS1995

Dual Wall Angles Would Enhance Performance Of A Solar Pond

Proposed dual-angle design for Sun-facing wall of solar pond enhances solar-energy-storage performance of pond; increase in performance over that of similar pond with conventional (single-angle) wall estimated to be 25 percent. Design compromises between maximizing heating and minimizing convection. Top part of Sun-facing wall optimized for top colder layer of water, less tendency toward convective mixing. Bottom part of wall optimized for bottom, warmer layer of water, greater tendency towards convection. Optimization involves consideration of both anticipated temperature-vs.-depth profile (affects tendency toward convection) and latitude (affects angle of incidence of solar radiation and rate of heating).

Noever, David A.↗
NASA NTRS1973

Atmospheric Aerosol and Thermal Structure in the Boundary Layer Over the Los Angeles Basin

A field study using a mobile lidar was recently conducted in the L. A. Basin, California, to (1) examine the relationship between the vertical aerosol and the thermal structure, and (2) map the vertical aerosol structure in the atmospheric boundary layer over the basin. These data are needed for use in the development of a mixing-depth submodel required for photochemical air Quality simulation models. Toward these ends, a series of lidar aerosol measurements in conjunction with balloon and aircraft temperature soundings were taken at a site in El Monte, and in a mobile mode along a 90-mile freeway loop between El Monte, Santa Monica, and Long Beach. The lidar data are presented in the form of time-height and distance-height cross sections. The results indicate that, although aerosol concentrations are frequently present above the base of the marine inversion, these are generally in stratified layers in contrast to the more uniform nature of the lower convective layer, permitting the mixing depth to be distinguished on this basis. The lidar-derived mixing depths are well correlated (within 100 m) with daytime temperature inversions. Other significant features shown by the lidar data include large Basin-wide mixing-depth variations, waves with amplitudes of 200-300 m and wavelengths of 1000-1500 m on the lower aerosol layer, and apparent aerosol "chimneys" with overrunning in the vicinity of convergence zones.

Johnson, Warren B.↗
NASA NTRS1991

Scalar mixing in the supersonic shear layer

Experiments were conducted in a two-stream planar mixing layer facility at convective Mach numbers of 0.28 and 0.62. Mie scattering from condensed alcohol droplets and planar laser-induced fluorescence (PLIF) of nitric oxide were used for flow visualization in both the side and plan views. The PLIF signals were approximately proportional to mixture fraction and were used to generate statistical quantities. Visualizations using both the Mie scattering and PLIF indicate the structure is essentially two-dimensional at Mc = 0.28 and three-dimensional at Mc = 0.62. Perspective renderings of side view images show the structures are streamwise ramped at Mc = 0.28 and cross-stream ramped at Mc = 0.62. This difference appears to be associated with decreasing streamwise structure spacings at the higher Mc condition. The statistical analysis suggests that with increasing compressibility, the scalar fluctuations are smaller, and the fraction of mixed fluid is higher.

Clemens, N. T.↗
NASA NTRS1993

Mixing of a chemically buoyant layer at the top of a thermally convecting fluid: Implications for mantle dynamics with application to Venus

Partial melting to generate the crust of a planet can create a buoyant residual layer at the top of the mantle which may have important implications for episodic planetary evolution. However, the rate of mixing of such a chemically buoyant layer with a thermally convecting mantle is an important unresolved question. Except for a few laboratory and numerical studies designed to address questions related to convection in the Earth's mantle, previous studies have generally treated on the mixing of passive tracers. The inhibiting role of chemical buoyancy on mixing is intuitively obvious but not fully understood quantitatively. In this study, we examine the dynamics of an intrinsically buoyant fluid layer at the top of a deeper, thermally convecting, infinite Prandtl number fluid that is heated from below.

Parmentier, E. M.↗
NASA NTRS1981

The origin of the Crab Nebula and the electron capture supernova in 8-10 M solar mass stars

The chemical composition of the Crab Nebula is compared with several presupernova models. The small carbon and oxygen abundances in the helium-rich nebula are consistent with only the presupernova model of the star whose main sequence mass was MMS approximately 8-9.5 M. More massive stars contain too much carbon in the helium layer and smaller mass stars do not leave neutron stars. The progenitor star of the Crab Nebula lost appreciable part of the hydrogen-rich envelope before the hydrogen-rich and helium layers were mixed by convection. Finally it exploded as the electron capture supernova; the O+Ne+Mg core collapsed to form a neutron star and only the extended helium-rich envelope was ejected by the weak shock wave.

Nomoto, K.↗
NASA NTRS1982

Effective temperatures and luminosities of very hot o-type subdwarfs

Twelve very hot O-type subdwarfs were observed with the IUE-satellite in the low dispersion mode. Temperatures were derived from the slopes of the UV continua and distances were estimated from the color excesses. Most of them are hotter than 60,000 K, i.e., they are the hottest known subdwarfs. From their spectral appearance and location in a H.R.-diagram they form a rather inhomogeneous group. Three of them turned out to be central stars or nearly central stars, and four are definitely near the white dwarf stage. The surface helium to hydrogen ratio varies from about normal to the extreme case. Most of them appear to be post EHB objectives of 0.5 solar mass with a helium burning shell as their energy source, and their peculiar helium-to-hydrogen ratios are most likely the result of diffusion and convective mixing in surface layers.

Schoenberner, D.↗
NASA NTRS1984

Effective temperatures and luminosities of very hot O type subdwarfs

Twelve very hot O-type subdwarfs were observed with the IUE-satellite in the low dispersion mode. Temperatures were derived from the slopes of the UV continua and distances were estimated from the color excesses. Most of them are hotter than 60,000 K, i.e., they are the hottest known subdwarfs. From their spectral appearance and location in a H.R.-diagram, they form a rather inhomogeneous group. Three of them turned out to be central stars or nearly central stars, and four are definitely near the white dwarf stage. The surface helium to hydrogen ratio varies from about normal to the extreme case. Most of them appear to be post EHB objectives of 0.5 solar mass with a helium burning shell as their energy source, and their peculiar helium-to-hydrogen ratios are most likely the result of diffusion and convective mixing in surface layers. Previously announced in STAR as N83-23254

Schonberner, D.↗
NASA NTRS1986

Analysis of Doppler lidar wind measurements

Doppler lidar and multiple Doppler radar data were obtained in a convectively mixed planetary boundary layer. The lidar measurements were possible due to scattering from existing aerosols; radar reflecting chaff was released in the atmosphere to make it visible to the multiple Doppler radar network. The data were analyzed to obtain detailed horizontal wind structures. The divergence of the horizontal wind was calculated and the anelastic continuity equation integrated to obtain vertical air motions. Differences between the areally averaged quantities and the grid point values provided a measure of the fluctuations in the wind components or the turbulent wind fluctuations. Vertical profiles of the mean winds and quantities related to the turbulent kinetic energy components and the turbulent momentum transfers were also calculated.

Srivastava, R. C.↗
NASA NTRSDate not supplied

Exploring the Continuum of Stratiform and Cumulus Cloudiness: Observational Insights Related to Marine Boundary Layer Clouds

Low-level marine clouds take on a wide range of morphological states owing to external forcing and internal feedbacks. Rarely are shallow marine clouds adequately described by a single simplified framework but instead exhibit features that partially conform to several states that could be considered “limiting”. Perhaps the most apparent dichotomy is whether to consider shallow clouds as existing within a surface-driven mixed layer or as convective “plume” elements positioned on top. Do the rules that govern the limiting cases transition smoothly through the hybrid scenarios found in nature, or are there particular regions of attraction or repulsion?We have identified 3 ”axes” along which to investigate how the energetics, thermodynamics and cloud macro structure relate to the intermediate spaces between idealizations.

Ewan Crosbie↗
NASA NTRS2014

A Method for Obtaining High Time and Spatial Resolution Convective Cloud Top Data for the TTL

A method for obtaining high time and spatial resolution convective cloud top data for the TTL Leonhard Pfister, Eric Jensen, Rei Ueyama, Eliot Atlas, and Maria Navarro Convective systems in the tropics have a maximum in the cloud top altitude distribution of about 13.5 km. However, there is a significant tail to this distribution -- a few percent reach the cold point tropopause (CPT) at 16.5 km, and there has been clear evidence of convective mass deposited as high as 19 km in the tropics. The region between 13.5 km and the cold point tropopause is transitional, between the free tropical troposphere where convective mixing dominates, and the stratosphere where slow upward ascent dominates. In this region (the Tropical Tropopause Layer), convective injection, slow ascent, and mixing from midlatitudes all have similar time scales. So, even though only a few percent of convective systems reach the CPT, convection is important. Space Based Lidar and cloud radar measurements have yielded information about long term average statistical distributions of cloud altitude as a function of location. However, we also need time-dependent cloud top altitude and cloud top potential temperature information, primarily to understand the water vapor and TTL cloud distributions. This is because the effect of convection depends on the local temperature, and on the subsequent temperature history. Time dependent cloud top information is also needed to understand short-lived tracers because cross-isentropic flow is time and space dependent. This paper presents a method of obtaining time and space dependent convective cloud top theta (and altitude) information using 3-hourly geostationary brightness temperature data, coupled with global 3 -hourly rainfall estimates and temperature analyses. We explore different mixing algorithms to obtain the most reasonable agreement with near-simultaneous observations by cloudsat and calipso. Observations of short-lived tracers from ATTREX, coupled with short-term trajectories are used to test the method's accuracy. An important caveat is the ambiguity of evaluating convective cloud top altitudes under from combined cloudsat and calipso measurements.

cold point tropopause (CPT)↗
NASA NTRS2019

An Automated Detection Methodology for Dry Well-Mixed Layers

The intense surface heating over arid land surfaces produces dry well-mixed layers (WML) via dry convection. These layers are characterized by nearly constant potential temperature and low, nearly constant water vapor mixing ratio. To further the study of dry WMLs, we created a detection methodology and supporting software to automate the identification and characterization of dry WMLs from multiple data sources including rawinsondes, remote sensing platforms, and model products. The software is a modular code written in Python, an open source language. Radiosondes from a network of synoptic stations in North Africa were used to develop and test the WML detection process. The detection involves an iterative decision tree that ingests a vertical profile from an input data file, performs a quality check for sufficient data density, and then searches upward through the column for successive points where the simultaneous changes in water vapor mixing ratio and potential temperature are less than the specified maxima. If points in the vertical profile meet the dry WML identification criteria, statistics are generated detailing the characteristics of each layer in the profile. At the end of the vertical profile analysis, there is an option to plot analyzed profiles in a variety of file formats. Initial results show that the detection methodology can be successfully applied across a wide variety of input data and North African environments and for all seasons. It is sensitive enough to identify dry WMLs from other types of isentropic phenomena such as subsidence layers and distinguish the current day’s dry WML from previous days.

Stephen D. Nicholls↗