Search NASA⌕ Search

SEARCH · Search NASA

Results for “Corrected coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Addressing the impact of Lyman opacity in inference of divertor plasma conditions with 2D spectroscopic camera analysis of Balmer emission during detachment in JET L-mode plasmas

The impact of re-absorption of the deuterium Lyman series emission was addressed in inferring divertor plasma conditions from Balmer series emission with 2D spectroscopic camera analysis during detachment in JET L-mode plasmas. The previously presented methodology was amended by modifying the standard photon emission coefficients and ionization and recombination rate coefficients of the ADAS database to consider the re-population of excited states due to Lyman opacity. This resulted in the estimate for the atomic density near the outer strike point to decrease by up to 75% at the onset of detachment at strike point temperatures of T e,osp ≈ 1.0–3.0 eV with respect to the strongly overestimated previously obtained values, whereas the estimated electron temperature and density were unaffected by the opacity correction within the scatter of the data and only a moderate reduction by up to 20% was observed in the estimate for the molecularly induced fraction of the Balmer emission. No noticeable change was seen in the ionization rate, calculated from the estimated outer strike point conditions, due to the decrease in the atomic density estimate compensating for the increased values of the opacity-corrected ADAS rate coefficients for ionization. In detached conditions at T e,osp ≈ 0.5–1.0 eV, 25%–35% lower recombination rates were provided by the opacity-corrected model. The observed effects on the experimental analysis were supported by a corresponding synthetic analysis based on EDGE2D-EIRENE simulations.

Balmer emission↗
DOE OSTI2020

Interpretation of Lyman opacity measurements in JET with the ITER-like wall using a particle balance approach

Recent measurements of the Ly β /D α ratio in the JET ITER-like wall (ILW) divertor show comparatively more pronounced Ly β reabsorption relative to previous results in JET with the carbon wall (JET-C). At the outer horizontal target ion current rollover point a Ly β reabsorption rate of 60% is measured, increasing to 80% in more pronounced detachment, implying a Ly α reabsorption rate of 90%–98%. The radially resolved Ly β /D α measurements are used to constrain Lyman opacity corrections to atomic rate coefficients using the population escape factor technique in order to capture the local changes to the excited state population structure in the high Lyman opacity regions at and outboard of the outer strike point. To check the self-consistency of the Lyman opacity measurements, a detailed spectroscopic interpretation of the outer divertor particle balance is presented, in which the impact of opacity corrections to the Ly α inverse photon efficiency coefficients is assessed. A five-fold deficit in the estimated D + source rate obtained with optically thin plasma assumptions is reconciled once the opacity corrections are factored into the Ly α photon rate to ionization rate conversion. The experiment results are reproduced in EDGE2D-EIRENE density scan simulations in which an imposed ad hoc Lyman reabsorption rate is recovered spectroscopically using synthetic measurements, and a similar shortfall in the D + source rate estimates is reconciled using Lyman opacity corrected atomic data. The model limitations prevent a more detailed self-consistent analysis of the Lyman opacity impact on divertor parameters and detachment evolution, and hence motivate renewed efforts to re-establish routine exploitation of the photon transport modelling capabilities in the EIRENE code package. Lyman opacity corrections to atomic data coefficients are necessary for spectroscopic interpretation of the JET-ILW divertor plasma, with significant influence on the divertor plasma also a likely consequence of the presence of strong Ly α reabsorption. Finally, a scan of auxiliary heating powers spanning L-mode and H-mode conditions reveals a strong correlation of the measured Ly β opacity with the outer target temperature, suggesting new possibilities for using Lyman opacity measurements in establishing detachment scalings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Novel Relaxation Time Approximation to the Relativistic Boltzmann Equation

In this work, we show that the widely used relaxation time approximation to the relativistic Boltzmann equation contains basic flaws, being incompatible with micro- and macroscopic conservation laws if the relaxation time depends on energy or general matching conditions are applied. We propose a new approximation that fixes such fundamental issues and maintains the basic properties of the linearized Boltzmann collision operator. We show how this correction affects transport coefficients, such as the bulk viscosity and particle diffusion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Core Model Proposal 397: Update to Hector V3.2.0

Hector V3.2.0 is the version documented in Dorheim et. al (accepted in GMD), the changes between the previous version coupled with GCAM were in response to the reviewer feedback. We corrected aerosol forcing coefficients based on Zelinka et al. (2023), enabled the permafrost module to be on by default, and recalibrated the model. These changes mean that we had to update the hector-gcam.ini file, it also causes some changes in Hector output behavior (described below) which may have implications on GCAM runs. Ultimately Hector is cooler by about 0.15 degrees, although this is scenario dependent.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Accelerated basis adaptation in homogeneous chaos spaces

Polynomial chaos expansions (PCE) provide an efficient approach to uncertainty quantification (UQ) and have been adapted to diverse applications across the spectrum of science and engineering. For situations involving large stochastic parameterizations, the curse of dimensionality renders PCE-based methods computationally prohibitive. A basis adaptation approach for PCE was proposed by Tipireddy and Ghanem (2014) which transforms the input random variables through an isometry such that sufficient probabilistic characterization of specific quantities of interest (QoI) is concentrated in an algebraic manifold embedded in the linear span of the dominant transformed variables. While quite versatile, that original version of the PCE basis adaptation exhibited slow convergence for a number of problems of practical significance. In the present paper, we propose two novel methods to accelerate the convergence of the original basis adaptation approach, thus expanding its reach while also providing insight into its performance. In the first method, information gained from a pilot PCE representation is used to correct the mean and Gaussian coefficients in the adapted space. By taking advantages of probabilistic information in higher dimensional adaptation gleaned from an initial adaptation, the second method updates the rotation matrix used to identify the dominant transformed variables. In this manner, the new rotation matrix concentrates even more probabilistic information in its first few dimensions. These two method can be combined to achieve even better performance, the combined method is referred to as sequentially optimized adaptation method. Here, the methods are demonstrated on an analytical test function and a model of a space structure with several sub-components and a non-smooth quantity of interest representing the maximum acceleration over time. Both methods achieve accelerated convergence of the basis adaptation approach with negligible additional costs.

Accelerated convergence↗
DOE OSTI2021

A molecular dynamics study of collisional heat transfer to nanoclusters in the gas phase

Nanoclusters in the gas phase grow by condensation and coagulation, which heat up nanoclusters, creating thermal non-equilibrium with the surrounding gas. The extent of non-equilibrium for nanoclusters is dependent upon the rate of heating relative to the rate of cooling brought about by nanocluster-gas molecule collisions, hence the latter process plays an important role in nanocluster energy evolution during growth. We apply molecular dynamics simulations to investigate heat transfer between metal nanoclusters and gas molecules relevant to high temperature aerosol systems. In analysis, we first define a thermal reemission coefficient (TRC), which is a correction factor for the portion of energy possessed by reemitted gas molecules after collision. Here, the TRC differs from the thermal accommodation coefficient (TAC), which is a correction factor for the maximum possible energy transfer rate from nanoclusters to gas molecules based on the diffusive collision model. We find the TRC is insensitive to nanocluster size but is affected by the nanocluster to gas temperature ratio and the nanocluster to gas atomic mass ratio. Comparison to the traditionally-defined TAC shows that the TAC is insensitive to temperature, a phenomenon that has been widely indicated in literature but not quantitatively explained. We show how the temperature insensitivity of the TAC arises because of the manner in which TRCs vary with both nanocluster and gas temperature, i.e. the manner in which the reemitted gas molecule energy from a surface varies with the temperature of that surface relative to that of the gas. In addition, while calculations ultimately reveal temperature insensitive TACs and justify their continued use in modeling gas-phase heat transfer, we argue that the TRC is more appropriate to calculate a priori in analyzing simulations; it is physically more realistic to first introduce a correction factor solely for the energy of reemitted gas molecules after a collision (as TRCs) instead of a correction factor applying to both the reemission energy and the initial energy (as TACs), as the latter is exactly calculable and independent of nanocluster properties. In line with prior work, for monoatomic gases we find the TAC decreases as the nanocluster to gas atomic mass increases, approaching 0.08 for gold nanoclusters in helium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Neural network-based single material beam-hardening correction for X-ray CT in Additive Manufacturing

Beam-hardening (BH) artifacts are ubiquitous in X-ray CT scans of dense metal additively manufactured (AM) parts. While linearization approaches are useful for correcting beam-hardened data from single material objects, they either require a calibration scan or detailed system and material composition information. In this paper, we introduce a neural network-based, material-agnostic method to correct beam-hardening artifacts. We train a neural network to map the acquired beam-hardened projection values and the corresponding estimated thickness of the part based on an initial segmentation to beam-hardening related parameters, which can be used to compute the coefficients of a linearizing correction polynomial. A key strength of our approach is that, once the network is trained, it can be used for correcting beam hardening from a variety of materials without any calibration scans or detailed system and material composition information. Furthermore, our method is robust to errors in the estimated thickness due to the typical challenge of obtaining an accurate initial segmentation from reconstructions impacted by BH artifacts. We demonstrate the utility of our method to obtain high-quality CT reconstructions from a collection of AM parts -- suppressing cupping and streaking artifacts

Rahman, Obaid↗
DOE OSTI2024

Lattice B -field correlators for heavy quarks

We analyze the color-magnetic (or “ B ”) field two-point function that encodes the finite-mass correction to the heavy-quark momentum-diffusion coefficient. The simulations are done on fine isotropic lattices in the quenched approximation at 1.5 T c , using a range of gradient flow times for noise suppression and operator renormalization. The continuum extrapolation is performed at fixed flow time followed by a second extrapolation to zero flow time. Perturbative calculations to next-to-leading order of this correlation function, matching gradient-flowed correlators to MS ¯ , are used to resolve nontrivial renormalization issues. We perform a spectral reconstruction based on perturbative model fits to estimate the coefficient κ B of the finite-mass correction to the heavy-quark momentum-diffusion coefficient. The approach we present here yields high-precision data for the correlator with all renormalization issues incorporated at next-to-leading order and is also applicable for actions with dynamical fermions. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Correcting for filter-based aerosol light absorption biases at the Atmospheric Radiation Measurement program's Southern Great Plains site using photoacoustic measurements and machine learning

Abstract. Measurement of light absorption of solar radiation by aerosols is vital for assessing direct aerosol radiative forcing, which affects local and global climate. Low-cost and easy-to-operate filter-based instruments, such as the Particle Soot Absorption Photometer (PSAP), that collect aerosols on a filter and measure light attenuation through the filter are widely used to infer aerosol light absorption. However, filter-based absorption measurements are subject to artifacts that are difficult to quantify. These artifacts are associated with the presence of the filter medium and the complex interactions between the filter fibers and accumulated aerosols. Various correction algorithms have been introduced to correct for the filter-based absorption coefficient measurements toward predicting the particle-phase absorption coefficient (Babs). However, the inability of these algorithms to incorporate into their formulations the complex matrix of influencing parameters such as particle asymmetry parameter, particle size, and particle penetration depth results in prediction of particle-phase absorption coefficients with relatively low accuracy. The analytical forms of corrections also suffer from a lack of universal applicability: different corrections are required for rural and urban sites across the world. In this study, we analyzed and compared 3 months of high-time-resolution ambient aerosol absorption data collected synchronously using a three-wavelength photoacoustic absorption spectrometer (PASS) and PSAP. Both instruments were operated on the same sampling inlet at the Department of Energy's Atmospheric Radiation Measurement program's Southern Great Plains (SGP) user facility in Oklahoma. We implemented the two most commonly used analytical correction algorithms, namely, Virkkula (2010) and the average of Virkkula (2010) and Ogren (2010)–Bond et al. (1999) as well as a random forest regression (RFR) machine learning algorithm to predict Babs values from the PSAP's filter-based measurements. The predicted Babs was compared against the reference Babs measured by the PASS. The RFR algorithm performed the best by yielding the lowest root mean square error of prediction. The algorithm was trained using input datasets from the PSAP (transmission and uncorrected absorption coefficient), a co-located nephelometer (scattering coefficients), and the Aerosol Chemical Speciation Monitor (mass concentration of non-refractory aerosol particles). A revised form of the Virkkula (2010) algorithm suitable for the SGP site has been proposed; however, its performance yields approximately 2-fold errors when compared to the RFR algorithm. To generalize the accuracy and applicability of our proposed RFR algorithm, we trained and tested it on a dataset of laboratory measurements of combustion aerosols. Input variables to the algorithm included the aerosol number size distribution from the Scanning Mobility Particle Sizer, absorption coefficients from the filter-based Tricolor Absorption Photometer, and scattering coefficients from a multiwavelength nephelometer. The RFR algorithm predicted Babs values within 5 % of the reference Babs measured by the multiwavelength PASS during the laboratory experiments. Thus, we show that machine learning approaches offer a promising path to correct for biases in long-term filter-based absorption datasets and accurately quantify their variability and trends needed for robust radiative forcing determination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Gapped-filtering for efficient Chebyshev expansion of the density projection operator

In this paper, we develop the gapped-filtering method, whereby a short Chebyshev expansion accurately represents the density-matrix operator. The method optimizes the Chebyshev coefficients to give the correct density matrix at all energies except within the gapped region where there are no eigenstates. Gapped filtering reduces the number of required terms in the Chebyshev expansion compared to traditional expansion methods, as long as one knows or can determine efficiently the HOMO and LUMO positions. The reduction is especially noticeable (factors of 2-3) when high accuracy is sought. To exemplify the method, we use gapped-filtering to increase the efficiency of stochastic-GW calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

On the effective theory of neutrino-electron and neutrino-quark interactions

We determine the four Fermi effective theory of neutrino interactions within the Standard Model including one-loop electroweak radiative corrections, in combination with the measured muon lifetime and precision electroweak data. Including two-loop matching and three-loop running corrections, we determine lepton coefficients accounting for all large logarithms through relative order $\cal{O}(\alpha \alpha_s)$ and quark coefficients accounting for all large logarithms through ${\cal{O}}(\alpha)$. We present four-fermion coefficients valid in $n_f=3$ and $n_f=4$ flavor quark theories, as well as in the extreme low-energy limit. We relate the coefficients in this limit to neutrino charge radii governing matter effects via forward neutrino scattering on charged particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Investigating Electron Conductivity Regimes in the Bacterial Cytochrome Wire OmcS

The anaerobic bacterium Geobacter sulfurreducens produces extracellular, electronically conductive cytochrome polymer wires that are conductive over micron length scales. Structure models from cryo-electron microscopy data show OmcS wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. However, the mechanism by which this heme arrangement supports long-range electronic conduction remains unknown. Structure models from cryo-electron microscopy data show these wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. Existing computational models using static heme redox potentials and coupling energies fail to explain experimental observations, predicting conductances 10,000 to 100,000 times lower than measured values. Here, we investigate how dynamic disorder affects site energies, interheme coupling, and long-range electronic conductivity within these cytochrome wires. We introduce an approach to extract charge carrier site information directly from Kohn–Sham density functional theory, without employing projector schemes, and show that site and coupling energies are highly sensitive to changes in interheme geometry and the surrounding electrostatic environment. Unlike models that incorporate dynamic disorder as a thermally averaged quantity, our quantum charge carrier model incorporates proxies for dynamic disorder through decoherence corrections, yielding predicted diffusion coefficient closer to what is expected from experiment and comparable with other organic-based electronic materials. Based on these simulations, we propose that the instantaneous fluctuations of the local electrostatic environment can transiently lift energy degeneracies and delocalize charge carriers. Furthermore, these studies reveal how incorporating dynamic fluctuations associated with the environment resolves the discrepancy between theory and experiment in microbial cytochrome wires and highlight design principles for bioinspired, heme-based conductive materials.

Bioinorganic chemistry↗
DOE OSTI2023

Nuclear-level effective theory of 𝜇→𝑒 conversion: Formalism and applications

Over the next decade new 𝜇→𝑒 conversion searches at Fermilab (Mu2e) and J-PARC (COMET, DeeMe) are expected to advance limits on charged lepton flavor violation (CLFV) by more than four orders of magnitude. Here, by considering the consequence of 𝑃 and 𝐶⁢𝑃 on elastic 𝜇→𝑒 conversion and the structure of possible charge and current densities, we show that rates are governed by six nuclear responses and a single scale, 𝑞/𝑚 𝑁 , where 𝑞 ≈ 𝑚 𝜇 is the momentum transferred from the leptons to the nucleus. To relate this result to microscopic formulations of CLFV, we construct in nonrelativistic effective theory (NRET) the CLFV nucleon-level interaction, pointing out the relevance of the dimensionless scales 𝑦=($^{𝑞⁢𝑏}_2$) 2 ⁢ > |$\overrightarrow{𝑣}_N$⁢|>|$\overrightarrow{𝑣}_μ$⁢|>|$\overrightarrow{𝑣}_T$| , where 𝑏 is the nuclear size, $\overrightarrow{𝑣}_N$ and $\overrightarrow{𝑣}_μ$ are the nucleon and muon intrinsic velocities, and $\overrightarrow{𝑣}_T$ is the target recoil velocity. We discuss previous work, noting the lack of a systematic treatment of the various small parameters. Because the parameter 𝑦 is not small, a proper calculation of 𝜇→𝑒 conversion requires a full multipole expansion of the nuclear response functions, an apparently daunting task with Coulomb-distorted electron partial waves. We demonstrate that the multipole expansion can be carried out to high precision by introducing a simplifying local momentum 𝑞 eff for the electron. Previous work has been limited to simple charge or spin interactions, thereby treating the nucleus effectively as a point particle. We show that such formulations are not compatible with the general form of the 𝜇→𝑒 conversion rate, failing to generate three of the six allowed nuclear response functions. The inclusion of the nucleon velocity $\overrightarrow{𝑣}_N$ yields an NRET with 16 operators and a rate of the general form. Consequently, in the current discovery era for CLFV, it provides the most sensible starting point for experimental analysis, defining what can and cannot be determined about CLFV from the highly exclusive process of 𝜇→𝑒 conversion. Finally, we expand the NRET operator basis to account for the effects of $\overrightarrow{𝑣}_μ$, associated with the muon's lower component, generating corrections to the CLFV coefficients of the point-nucleus response functions. Using advanced shell-model methods, we compute 𝜇→𝑒 conversion rates for a series of experimental targets, deriving bounds on the coefficients of the CLFV operators. These calculations are the first to include a general basis of CLFV operators, full evaluation of the associated nuclear response functions, and an accurate treatment of electron and muon Coulomb effects. We discuss target selection as an experimental “knob” that can be turned to probe the microscopic origins of CLFV. We describe two types of coherence that enhance certain CLFV operators and selection rules that blind elastic 𝜇→𝑒 conversion to others. We discuss the matching of the NRET onto higher level effective field theories, such as those constructed at the light quark level, noting opportunities to build on existing work in direct detection of dark matter. We discuss the relation of 𝜇→𝑒 conversion to 𝜇→𝑒+𝛾 and 𝜇→3⁢𝑒, showing how MEG II and Mu3e results will complement those of Mu2e and COMET. Finally we describe a accompanying script—in Mathematica and Python versions—that can be used to compute 𝜇→𝑒 conversion rates in various nuclear targets for the full set of NRET operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Development and Validation of Passive Yaw in the Open-Source WEC-Sim Code

A passive yaw implementation is developed, validated, and explored for the WEC-Sim, an open-source wave energy converter modeling tool that works within MATLAB/Simulink. The Reference Model 5 (RM5) is selected for this investigation, and a WEC-Sim model of the device is modified to allow yaw motion. A boundary element method (BEM) code was used to calculate the excitation force coefficients for a range of wave headings. An algorithm was implemented in WEC-Sim to determine the equivalent wave heading from a body’s instantaneous yaw angle and interpolate the appropriate excitation coefficients to ensure the correct time-domain excitation force. This approach is able to determine excitation force for a body undergoing large yaw displacement. For the mathematically simple case of regular wave excitation, the dynamic equation was integrated numerically and found to closely approximate the results from this implementation in WEC-Sim. A case study is presented for the same device in irregular waves. In this case, computation time is increased by 32x when this interpolation is performed at every time step. To reduce this expense, a threshold yaw displacement can be set to reduce the number of interpolations performed. A threshold of 0.01° was found to increase computation time by only 22x without significantly affecting time domain results. Similar amplitude spectra for yaw force and displacements are observed for all threshold values less than 1°, for which computation time is only increased by 2.2x.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2020

Shockwave Arrival Times from Operation Redwing and Operation Upshot-Knothole

Back in the 1940s, 50s, and 60s, 210 nuclear tests were conducted in the atmosphere. As part of the testing program, EG&G performed shockwave arrival-time measurements for different shots in different operations using pressure transducers at different distances from ground zero. They then developed correlations unique to each set of data. They did not attempt to correlate all data onto one curve. As a fireball moves, material is picked up and pulled in, which is called entrainment. This extra material increases the mass of the fireball, and as the energy is spread out over a larger and larger mass, the specific internal energy of the fireball gases drops, which causes the temperature to drop as well. When the energy in the solid angle of a spherical shockwave hits the surface, it is reflected. Shortly thereafter, it catches up with the outward-moving shockwave and re-combines with it, causing it to expand at a slightly faster rate. As the shockwave grows, it approaches a hemispherical shape. The purpose of this project is to demonstrate that the shockwave arrival-time data can, in fact, be correlated onto a single function when the shockwave time-dependent solution is modified to include a geometric factor, θ, and is corrected for an entrainment coefficient.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

SIF and Vegetation Indices in the US Midwestern Agroecosystems, 2016-2021, Carbon Monitoring System (CMS)

This dataset contains half-hourly ground solar-induced chlorophyll fluorescence (SIF) and vegetation indices including NDVI, EVI, Red edge chlorophyll index, green chlorophyll index, and photochemical reflectance index at seven crop sites in Nebraska and Illinois for the period 2016-2021. Four sites were located at Eddy Covariance (EC) tower sites (sites US-Ne2, US-Ne3, US-UiB, and US-UiC), and three sites were located on private farms (sites Reifsteck, Rund, and Reinhart). The sites were either miscanthus, corn-soybean rotation or corn-corn-soybean rotation. The spectral data for SIF retrieval and hyperspectral reflectance for vegetation index calculation were collected by the FluoSpec2 system, installed near planting, and uninstalled after harvest to collect whole growing-season data. Raw nadir SIF at 760 nm from different algorithms (sFLD, 3FLD, iFLD, SFM) are included. SFM_nonlinear and SFM_linear represent the Spectral fitting method (SFM) with the assumption that fluorescence and reflectance change with wavelength non-linearly and linearly, respectively. Additional data include two SIF correction factors including calibration coefficient adjustment factor (f_cal_corr_QEPRO) and upscaling nadir SIF to eddy covariance footprint factor (ratio_EC footprint, SIF pixel), and measured FPAR from quantum sensors and Rededge NDVI calculated FPAR. The data are provided in comma-separated values (CSV) format.

Ameriflux↗
DOE OSTI2020

Development and Validation of Passive Yaw in the Open-Source WEC-Sim Code: Preprint

A passive yaw implementation is developed, validated, and explored for the Wave Energy Converter Simulator (WEC-Sim), an open-source wave energy converter modeling tool that works within MATLAB/Simulink. The Reference Model 5 (RM5) is selected for this investigation, and a WEC-Sim model of the device is modified to allow yaw motion. A boundary element method (BEM) code was used to calculate the excitation force coefficients for a range of wave headings. An algorithm was implemented in WEC-Sim to determine the equivalent wave heading from a body’s instantaneous yaw angle and interpolate the appropriate excitation coefficients to ensure the correct time-domain excitation force. This approach is able to determine excitation force for a body undergoing large yaw displacement. For the mathematically simple case of regular wave excitation, the dynamic equation was integrated numerically and found to closely approximate the results from this implementation in WEC-Sim. A case study is presented for the same device in irregular waves. In this case, computation time is increased by 32x when this interpolation is performed at every time step. To reduce this expense, a threshold yaw displacement can be set to reduce the number of interpolations performed. A threshold of 0.01 was found to increase computation time by only 22x without significantly affecting time domain results. Similar amplitude spectra for yaw force and displacements are observed for all threshold values less than or equal to 1, for which computation time is only increased by 2.2x.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2022

Four-derivative corrections to minimal gauged supergravity in five dimensions

We study four-derivative corrections to pure N = 2, D = 5 gauged supergravity. In particular, we find that, up to field redefinitions, there is a single four-derivative superinvariant that one can add to the action, up to factors of the two-derivative action. Consequently, this selects out a unique set of coefficients for the four-derivative corrections. We confirm these coefficients (in the ungauged limit) on the BMPV solution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗