Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crop phenology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Evapotranspiration-Based Irrigation Scheduling in Salinas Valley Vegetable Crops

Crop evapotranspiration (ETc) monitoring may support improved irrigation water management in California's Central Coast agricultural region. The CropManage (CM) web-application, developed and operated by the University of California, informs irrigation and nitrogen scheduling decisions made by growers and crop consultants. Daily weather conditions are accounted for by use of grass reference ET data imported from the California Dept. Water Resources. Satellite observations of crop development from NASA's Satellite Irrigation Management Support can be imported and used by CM to adjust crop phenology. A replicated irrigation trial was performed July-October 2018 to investigate yield response of drip-irrigated celery (Apium graveolens) to applied water volume, and to further calibrate CM for use in that crop. Water was uniformly applied by sprinklers to establish the crop, and CM was then used to guide surface drip irrigation treatments applied three times weekly at 50%, 75%, 100%, 125% and 150% of ETc replacement level. Nitrogen fertilizer totaling 380 kg/ha was applied through the drip system generally once per week. Treatments were evaluated for commercial yield 85 and 93 days after transplanting (DAT). The 100% ETc treatment yielded 83 Mg/ha 93 DAT, which was 10 Mg/ha higher than the reported regional average yield in 2017. The 100% treatment received a seasonal total of 34 cm of water, compared with reported grower average exceeding 48 cm. Higher yields of 102 and 108 Mg/ha were observed in the 125% and 150% ETc treatments, respectively. Regarding crop quality, however, the 150% ETc treatment suffered greater incidence of pith breakdown and basal rot than the 100% treatment. Yields from the 50% and 75% treatments were below regional average. Aboveground biomass was evaluated 87 DAT. Fresh and dry biomass accumulations were positively related to applied water volume. Additional findings will be presented for a cauliflower trial conducted spring/summer 2019.

Johnson, Lee F.↗

A comprehensive data processing plan for crop calendar MSS signature development from satellite imagery: Crop identification using vegetation phenology

The author has identified the following significant results. The phenological method of crop identification involves the creation of crop signatures which characterize multispectral observations as phenological growth states. The phenological signature models spectral reflectance explicitly as a function of crop maturity rather than as a function of date. A correspondence of time to growth state is established which minimizes the smallest difference between the given multispectral multitemporal vector and a category mean vector. The application of the method to the identification of winter wheat and corn shows (1) the method is capable of discriminating crop type with about the same degree of accuracy as more traditional classifiers; (2) the use of LANDSAT observations on two or more dates yields better results than the use of a single observation; and (3) some potential is demonstrated for labeling the degree of maturity of the crop, as well as the crop type.

Hlavka, C. A.↗

Initial Evaluation of CropManage Decision-Support Model for Vineyard ET Estimation

The CropManage(CM) decision-support web application was originally developed by U.C. Cooperative Extension to support evapotranspiration (ET) based irrigation scheduling and nutrient management of cool-season vegetables. The model uses prescribed crop phenology curves to develop daily estimates of fractional green canopy cover (Fc) within the field. Periodic Fc observations acquired by ground-based methods or imported from NASA’s Satellite Irrigation Management Support (SIMS) can be used to adjust the prescribed timeseries for such factors as weather anomalies or non-standard agronomic practice, as needed. Fc is then converted to daily crop coefficient (fraction of reference ET) values. The crop coefficient is combined with reference evapotranspiration, collected by the California Irrigation Management Information System, to derive daily ET estimates for the given field. Irrigation runtime recommendations are issued for a given date based on total ET since the last irrigation event (less any rainfall), and corrected for distribution uniformity of the water delivery system. In this project, CM was adapted to vineyards by adding sub-models to account for early-season depletion of stored soil moisture, cover crop presence, and intentional water stress. An initial trial was performed on a Central Coast winegrape vineyard, where an eddy covariance tower measured daily ET during from May-Dec 2020. Total ET for the period showed strong agreement between the tower-based measurements (443 mm) and the CM model (431 mm). The model tended to overestimate cumulative ET during mid-June by up to 30 mm (about 15%) and later underestimated cumulative ET by as much as 65 mm (about 23%) in late September, suggesting that additional model calibration is needed to improve simulation of within-season variability. Results will be reported for trials on additional vineyard sites conducted during the 2021 season.

Evaluation↗

A meteorologically driven grain sorghum stress indicator model

A grain sorghum soil moisture and temperature stress model is described. It was developed to serve as a meteorological data filter to alert commodity analysts to potential stress conditions and crop phenology in selected grain sorghum production areas. The model also identifies optimum conditions on a daily basis and planting/harvest problems associated with poor tractability.

Taylor, T. W.↗

Relating Land Cover Change to Runoff Distribution Using NASA Earth Observations in Riley County, Kansas

In recent years, Riley County, Kansas experienced high levels of flooding potentially due to changes in land use and impervious surface. To analyze the increase in floods and runoff patterns over time, this study contrasted two methods of curve number (CN) calculation, which estimated runoff from rainfall events, from 2006-2020. The conventional calculation method used a look-up table and tracked land use/land cover change. This method resulted in static tables from various inputs such as soil type, surface imperviousness, slope, and crop phenology to estimate runoff versus infiltration. These tables allowed for phenology specific curve numbers and accounted for various farming techniques but required many inputs and lacked flexibility to include seasonal variations in vegetation. In contrast, the dynamic method is a more modern and simple calculation employing normalized difference vegetation index (NDVI) data from Landsat 5, Landsat 7, and Landsat 8 satellites compiled over the rainy season each year to calculate curve numbers based off seasonal vegetation. This dynamic method allowed for more precise analysis of runoff variability because NDVI is a more accurate, real-time measurement for land cover and it could be calculated with greater temporal detail. The results will allow decision makers to make more informed decisions on resiliency strategies to address future flooding.

Trista Brophy↗

CropManage Application for Vineyard Irrigation Decision-Support

CropManage is a free web-application developed by U.C. Cooperative Extension to support evapotranspiration based irrigation scheduling and nutrient management for major specialty crops. Prescribed phenology curves are used to develop daily estimates of canopy cover within a given field, based on days since planting (annual crops) or budbreak (trees, vines). These curves are modulated by a MaxCan parameter representing seasonal maximum canopy cover. Crop development observations can be used to adjust for such factors as weather anomalies or non-standard agronomic practice, as needed. Canopy cover is converted to crop coefficient and combined with reference evapotranspiration to derive daily water consumption. Guidance on crop water requirement is then conveyed to users in terms of system runtime issued on-demand for a given date, largely based on total evapotranspiration since last irrigation event. In this study, CropManage was adapted to vineyards by adding modules accounting for early-season soil moisture depletion and cover crop presence. A crop stress parameter was added to accommodate deficit irrigation practice, allowing the user to specify percentage departure from full water requirement along with start/stop dates. An initial verification exercise was performed on three winegrape vineyards located in California’s Central Coast (2020), North Coast (2020) and Central Valley (2019). Daily crop evapotranspiration was monitored by eddy-covariance fluxtowers. MaxCan was measured by ground and satellite observation. Stress regime was specified by grower practice where available, otherwise stress levels were inferred from applied water records. Mean absolute error and mean bias error of modeled cumulative evapotranspiration were computed with respect to the eddy covariance measurements collected throughout the growing season. Results indicate the modified CropManage water management module performs reasonably well for winegrape. Additional effort is planned to modify the nutrient module for vineyard use.

CropManage↗

Infrared-temperature variability in a large agricultural field

The combined effect of water carved gullies, varying soil color, moisture state of the soil and crop, nonuniform phenology, and bare spots was measured for commercially grown barley planted on varying terrain. For all but the most rugged terrain, over 80% of the area within 4, 16, 65, and 259 ha cells was at temperatures within 3 C of the mean cell temperature. The result of using relatively small, 4 ha instantaneous field of views for remote sensing applications is that either the worst or the best of conditions is often observed. There appears to be no great advantage in utilizing a small instantaneous field of view instead of a large one for remote sensing of crop canopy temperatures. The two alternatives for design purposes are then either a very high spatial resolution, of the order of a meter or so, where the field is very accurately temperature mapped, or a low resolution, where the actual size seems to make little difference.

Millard, J. P.↗

Houston area multicrop inspection trips

The phenology of crops such as corn, cotton, soybeans, sorghum, sunflowers, and rice and their observed signatures on LANDSAT imagery was studied. This was accomplished by photographing the various crops in segments 275 and 276 located in Wharton County, Texas and comparing those photographs with LANDSAT imagery of the same dates. These comparisons gave insight as to why a particular crop growth stage appeared as a definite signature on LANDSAT and how the percentage of ground cover of various crops affected the signatures on LANDSAT imagery. Numerous crop growth stages could not be directly compared due to cloud cover during several LANDSAT overpasses.

Dunham, E. W.↗

The Landsat-D responsiveness to user community needs

Initial examinations of the Landsat-4 Multispectral Scanner and Thematic Mapper (IM) imagery indicate that these systems and the ground-based data processing systems are performing well. A combination of the spatial resolution of the multispectral scanner with the four band (0.5-0.6, 0.6-0.7, 0.7-0.8, and 0.8-1.1 microns) multispectral capability provides a useful observation technique for identifying crop type, phenological state of development, and a real condition assessment. Landsat multispectral scanner imagery has become more important in the search for new deposits of oil and mineral resources, and geological applications indicate that image analysis complements geological mapping techniques. Advantages of the TM include more precise measurements of the increased reflectance of vegetation in the green and near infrared. In addition, TM has improvement vegetation species differentiation, due to measurements made in new spectral bands. Preliminary TM data analysis reveals that systems have performed to optimum expectations.

Salomonson, V. V.↗

Solutions Network Formulation Report. Using NASA Sensors to Perform Crop Type Assessment for Monitoring Insect Resistance in Corn

The EPA (U.S. Environmental Protection Agency) is tasked to monitor for insect pest resistance to transgenic crops. Several models have been developed to understand the resistance properties of insects. The Population Genetics Simulator model is used in the EPA PIRDSS (Pest Infestation and Resistance Decision Support System). The EPA Office of Pesticide Programs uses the DSS to help understand the potential for insect pest resistance development and the likelihood that insect pest resistance will negatively affect transgenic corn. Once the DSS identifies areas of concern, crews are deployed to collect insect pest samples, which are tested to identify whether they have developed resistance to the toxins in transgenic corn pesticides. In this candidate solution, VIIRS (Visible/Infrared Imager/Radiometer Suite) vegetation index products will be used to build hypertemporal layerstacks for crop type and phenology assessment. The current phenology attribute is determined by using the current time of year to index the expected growth stage of the crop. VIIRS might provide more accurate crop type assessment and also might give a better estimate on the crop growth stage.

Lewis, David↗

Daily MODIS 500 m Reflectance Anisotropy Direct Broadcast (DB) Products for Monitoring Vegetation Phenology Dynamics

Land surface vegetation phenology is an efficient bio-indicator for monitoring ecosystem variation in response to changes in climatic factors. The primary objective of the current article is to examine the utility of the daily MODIS 500 m reflectance anisotropy direct broadcast (DB) product for monitoring the evolution of vegetation phenological trends over selected crop, orchard, and forest regions. Although numerous model-fitted satellite data have been widely used to assess the spatio-temporal distribution of land surface phenological patterns to understand phenological process and phenomena, current efforts to investigate the details of phenological trends, especially for natural phenological variations that occur on short time scales, are less well served by remote sensing challenges and lack of anisotropy correction in satellite data sources. The daily MODIS 500 m reflectance anisotropy product is employed to retrieve daily vegetation indices (VI) of a 1 year period for an almond orchard in California and for a winter wheat field in northeast China, as well as a 2 year period for a deciduous forest region in New Hampshire, USA. Compared with the ground records from these regions, the VI trajectories derived from the cloud-free and atmospherically corrected MODIS Nadir BRDF (bidirectional reflectance distribution function) adjusted reflectance (NBAR) capture not only the detailed footprint and principal attributes of the phenological events (such as flowering and blooming) but also the substantial inter-annual variability. This study demonstrates the utility of the daily 500 m MODIS reflectance anisotropy DB product to provide daily VI for monitoring and detecting changes of the natural vegetation phenology as exemplified by study regions comprising winter wheat, almond trees, and deciduous forest.

Vegetation↗

Principal component greenness transformation in multitemporal agricultural Landsat data

A data compression technique for multitemporal Landsat imagery which extracts phenological growth pattern information for agricultural crops is described. The principal component greenness transformation was applied to multitemporal agricultural Landsat data for information retrieval. The transformation was favorable for applications in agricultural Landsat data analysis because of its physical interpretability and its relation to the phenological growth of crops. It was also found that the first and second greenness eigenvector components define a temporal small-grain trajectory and nonsmall-grain trajectory, respectively.

Abotteen, R. A.↗

Phenology satellite experiment

The author has identified the following significant results. The 1972 Brown Wave and 1973 Green Wave were detected at 24 sites located in four north-south corridors across the United States through analysis of ERTS-1 imagery and multispectral scanner digital tapes. Ground observations from these sites were correlated with ERTS data. These two phenological events were documented by observations from more than 3200 sites across the United States. The problem of changing atmospheric and illumination conditions were studied and corrections to ERTS data suggested. Band-to-band ratios were developed and correlated with the fall and spring phenological changes in field crops and forests. The results to date show the feasibility of developing and refining phenoclimatic models for use in characterizing crop status and as an aid to yield prediction.

Dethier, B. E.↗

Harmonized Landsat/Sentinel-2 Products for Land Monitoring

The Harmonized Landsat-8 and Sentinel-2 (HLS) project is a NASA initiative aiming to produce a seamless, harmonized surface reflectance record from the Operational Land Imager (OLI) and Multi-Spectral Instrument (MSI) aboard Landsat-8 and Sentinel-2 remote sensing satellites, respectively. The HLS products are based on a set of algorithms to obtain seamless products from both sensors (OLI and MSI): atmospheric correction, cloud and cloud-shadow masking, geographic co-registration and common gridding, bidirectional reflectance distribution function normalization and bandpass adjustment. As of version 1.3, the HLS v1.3 data set covers 9.12 million km2 and spans from first Landsat-8 data (2013) to present. HLS products provide near-daily surface reflectance information with a common geometric framework, and are suitable for a variety of agricultural and vegetation monitoring tasks, including analysis of crop type, condition, and phenology.

Masek, Jeffrey↗

The use of temporal data in Landsat crop surveys

Multidate Landsat imagery has been applied for crop identification purposes in Kern County, California. The county's arid climate provides complete sets of cloud-free imagery throughout the crop-growing season. Both manual and digital techniques are used to study the value of the data, and a semiautomated video system is used to extract densitometric data from Landsat transparencies. It is noted that temporal variations in single-date classification performance and increases in multidate performance are caused by the physiological and phenological differences between types of crops. These differences may be used to introduce crop calendar data into satellite crop surveys.

Tinney, L. R.↗