Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cu dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Optical Excitation of a Nanoparticle Cu/p-NiO Photocathode Improves Reaction Selectivity for CO 2 Reduction in Aqueous Electrolytes

We report the light-induced modification of catalytic selectivity for photoelectrochemical CO 2 reduction in aqueous media using copper (Cu) nanoparticles dispersed onto p-type nickel oxide (p-NiO) photocathodes. Optical excitation of Cu nanoparticles generates hot electrons available for driving CO 2 reduction on the Cu surface, while charge separation is accomplished by hot-hole injection from the Cu nanoparticles into the underlying p-NiO support. Photoelectrochemical studies demonstrate that optical excitation of plasmonic Cu/p-NiO photocathodes imparts increased selectivity for CO 2 reduction over hydrogen evolution in aqueous electrolytes. Specifically, we observed that plasmon-driven CO 2 reduction increased the production of carbon monoxide and formate, while simultaneously reducing the evolution of hydrogen. Our results demonstrate an optical route toward steering the selectivity of artificial photosynthetic systems with plasmon-driven photocathodes for photoelectrochemical CO 2 reduction in aqueous media.

25 ENERGY STORAGE↗

Electron Glass Phase with Resilient Zhang-Rice Singlets in LiCu 3 ⁢O 3

LiCu 3 ⁢O 3 is an antiferromagnetic mixed valence cuprate where trilayers of edge-sharing Cu(II)O (3⁢d 9 ) are sandwiched in between planes of Cu(I) (3⁢d 10 ) ions, with Li stochastically substituting Cu(II). Angle-resolved photoemission spectroscopy (ARPES) and density functional theory reveal two insulating electronic subsystems that are segregated in spite of sharing common oxygen atoms: a Cu d z 2 /O p z derived valence band (VB) dispersing on the Cu(I) plane, and a Cu 3⁢d x 2 -y 2 /O 2⁢p x,y derived Zhang-Rice singlet (ZRS) band dispersing on the Cu(II)O planes. First-principle analysis shows the Li substitution to stabilize the insulating ground state, but only if antiferromagnetic correlations are present. Li further induces substitutional disorder and a 2D electron glass behavior in charge transport, reflected in a large 530 meV Coulomb gap and a linear suppression of VB spectral weight at E F that is observed by ARPES. Surprisingly, the disorder leaves the Cu(II)-derived ZRS largely unaffected. Finally, this indicates a local segregation of Li and Cu atoms onto the two separate corner-sharing Cu⁡(II)⁢O 2 sub-lattices of the edge-sharing Cu(II)O planes, and highlights the ubiquitous resilience of the entangled two hole ZRS entity against impurity scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural uniformity and compositional homogeneity of solid-phase alloyed rod

Solid-phase processes have emerged as an alternative to fusion-based alloying to avoid coarse microstructures, undesirable phase formation, and high energy consumption. However, achieving uniform distribution of alloying elements during friction-based processing remains challenging due to highly heterogeneous thermomechanical conditions. This work evaluates the structural uniformity and compositional homogeneity of Al–Cu–Zn alloyed rods produced by friction extrusion (FE) and establishes the role of the rotational speed to feed rate ratio (N/V) on alloying effectiveness. A systematic matrix of FE experiments was conducted at constant extrusion ratio with N/V values ranging from 3.7 to 300. Compositional uniformity was assessed along the rod length (ICP-OES), in three dimensions (X-ray computed tomography), and at the microscale (SEM–EDS), supported by a gray-level co-occurrence matrix (GLCM)–based homogeneity metric. Smoothed particle hydrodynamics (SPH) simulations were used to reveal material flow and thermomechanical fields. Results show that N/V = 100 produces a high-shear mixing zone that eliminates the unmixed core and enables near-full dissolution and dispersion of Cu and Zn. At lower N/V, a laminar flow region persists at the rod center, causing segregation and large composition gradients. The combined experimental–computational analysis provides mechanistic insight into the transition from fragmented particle dispersion to thermomechanically assisted metallurgical mixing. This study establishes processing–structure relationships for solid-phase alloying and provides guidance for achieving homogenized compositions comparable to wrought alloys via rapid, scalable FE processing.

Aluminum↗

Hydroxyls on CeO 2 Support Promoting CuO/CeO 2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. Here, in this study, we report the preparation and application of a novel CuO/CeO 2 catalyst using a hydroxyl-rich Ce(OH) x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO 2 support, the new CuO/CeO 2 catalyst prepared from the OH-rich Ce(OH) x (CuO/CeO 2 –OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO 2 support on the catalytic performance and physicochemical properties of the CuO/CeO 2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuO x dispersion on CeO 2 , increased the CuO x –CeO 2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO 2 –OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH) x is a superior support for the preparation of highly efficient metal catalysts for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Selective Methane to Methanol Conversion on Inverse SnO 2 /Cu 2 O/Cu(111) Catalysts: Unique Properties of SnO 2 Nanostructures and the Inhibition of the Direct Oxidative Combustion of Methane

Direct methane to methanol (CH 4 → CH 3 OH) conversion in heterogeneous catalysis has been a long-standing challenge due to the difficulties in equalizing the activation of methane and protection of the methanol product at the same reaction conditions. Here, we report an inverse catalyst, consisting of small structures of SnO 2 (0.5-1 nm in size) dispersed on Cu 2 O/Cu(111), for highly selective CH 3 OH production from CH 4 . This system was investigated by combining theoretical [density functional theory calculations (DFT), kinetic Monte Carlo simulations (KMC)] and experimental methods [scanning tunneling microscopy (STM), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS)]. The DFT and AP-XPS studies showed that on SnO 2 /Cu 2 O/Cu(111) the conversion of CH 4 by oxygen (O 2 ) preferred complete combustion to carbon dioxide (CO 2 ). The addition of water (H 2 O) enhanced the production of CH 3 OH to nearly 100% selectivity in KMC simulations. This trend was consistent with results of AP-XPS. The presence of water in the reaction environment rendered an extremely high amount of methoxy species (*CH 3 O), a precursor for CH 3 OH production. Further, the high CH 3 OH selectivity of SnO 2 /Cu 2 O/Cu(111) reflected the unique atomic and electronic structure of the supported SnO 2 nanoparticles. As a result, the O 2 adsorption and dissociation, and thus the full combustion of CH 4 to CO 2 , was completely suppressed; while the H 2 O dissociative adsorption was still feasible, providing active hydroxyl species for a truly selective CH 4 to CH 3 OH conversion.

03 NATURAL GAS↗

First-principles design of a single-atom–alloy propane dehydrogenation catalyst

The complexity of heterogeneous catalysts means that a priori design of new catalytic materials is difficult, but the well-defined nature of single-atom–alloy catalysts has made it feasible to perform unambiguous theoretical modeling and precise surface science experiments. Herein we report the theory-led discovery of a rhodium-copper (RhCu) single-atom–alloy catalyst for propane dehydrogenation to propene. Although Rh is not generally considered for alkane dehydrogenation, first-principles calculations revealed that Rh atoms disperse in Cu and exhibit low carbon-hydrogen bond activation barriers. Surface science experiments confirmed these predictions, and together these results informed the design of a highly active, selective, and coke-resistant RhCu nanoparticle catalyst that enables low-temperature nonoxidative propane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing HT-WGS catalyst performance with stable monovalent copper species via electron supply from defect-induced MgO

Magnesium oxide (MgO) exhibits excellent synergy with cerium oxide (CeO2), serving as either textural or electronic promoters during catalytic reactions. However, achieving well-dispersed CeO2-MgO is technically challenging because they are known not to form solid solutions, and the crystal growth of CeO2 suppresses the structure formation of MgO, leading to MgO being in an inhomogeneous amorphous state within CeO2-MgO. For this reason, most of research groups have been struggling with synthesizing well-dispersed CeO2-MgO. This leads them to focusing on the interaction between the active metal and cerium, overlooking the true role of magnesium. In this study, we successfully synthesized well-dispersed CeO2-MgO via a spray pyrolysis-assisted evaporation-induced self-assembly method, followed by the impregnation of Cu. The location and dispersion of Cu nanoparticles were highly dependent on the MgO distribution. Additionally, we revealed that this significantly influenced the catalytic activity and stability towards the HTS reaction and furthermore supplies electrons to monovalent Cu species, helping maintain the stable electron structure and oxidation state of Cu species considered as active sites. These findings suggest that optimizing the MgO distribution in CeO2-MgO is a promising strategy for developing efficient catalysts for the HTS reaction, emphasizing the role of MgO in designing high-performance catalysts.

Kim, Min-Jae↗

Hydrogen activation by rhodium under the cover of a copper oxide thin film

Here, the activation of reactants by catalytically active metal sites at metal-oxide interfaces is important for understanding the effect of metal-support interactions on nanoparticle catalysts and for tuning activity and selectivity. Using a combined experimental and theoretical approach, we studied the activation of H 2 and the effect of CO poisoning on isolated Rh atoms completely or partially covered by a copper oxide (Cu 2 O) thin film. Temperature-programmed desorption (TPD) experiments conducted in ultra-high vacuum (UHV) show that neither a partially nor a fully oxidized Cu 2 O layer grown on a Rh/Cu(111) single-atom alloy can activate hydrogen in UHV. However, in situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments performed at elevated H 2 pressures reveal that Rh significantly accelerates the reduction of these Cu 2 O thin films by hydrogen. Remarkably, the fastest reduction rate is observed for the fully oxidized sample with all Rh sites covered by Cu 2 O. Both TPD and AP-XPS data demonstrate that these covered Rh sites are inaccessible to CO, indicating that Rh under Cu 2 O is active for H 2 dissociation but cannot be poisoned by CO. In contrast, an incomplete oxide film leaves some of the Rh sites exposed and accessible to CO, and hence prone to CO poisoning. Density functional theory calculations demonstrate that unlike many reactions in which hydrogen activation is rate limiting, the rate-determining step in the dissociation of H 2 on thin-film Cu 2 O with Rh underneath is the adsorption of H 2 on the buried Rh site, and once adsorbed, the dissociation of H 2 is barrierless. These calculations also explain why H 2 can only be activated at higher pressures. Together, these results highlight how different the reactivity of atomically dispersed Rh in Cu can be depending on its accessibility through the oxide layer, providing a way to engineer Rh sites that are active for hydrogen activation but resilient to CO poisoning.

36 MATERIALS SCIENCE↗

Fracture resistance of hierarchical Cu–Mo nanocomposite thin films

We report the fracture behavior of high-temperature co-sputtered Cu/Mo nanocomposite thin films was investigated through in situ 3-point bend testing of pre-notched microbeams in SEM. The as-synthesized nanocomposites present hierarchical nano/microstructures composed of a matrix of phase-separated Cu–Mo with nanoscale ligaments dispersed with sub-micron scale Cu-rich islands containing Mo nano-precipitates. Results show a significant crack growth resistance in the hierarchical nanocomposite, several times higher than that measured in Cu/Mo nanoscale multilayers. Based on electron microscopy characterization, three mechanisms of crack growth resistance in the hierarchical structures are proposed: crack bridging by the Cu-rich layer, crack deflection via shear along the Cu/Mo interface, and multiple cracking. This work demonstrates an approach to increase toughness in high strength nanocomposites through interface micro-structure design.

36 MATERIALS SCIENCE↗

CeO 2 Promoted CuO/MgO-Al 2 O 3 Catalyst with Enhanced Activity and Water-Resistance for CO Oxidation

Copper (Cu)-based catalysts have emerged as cost-effective and sustainable alternatives to noble metal systems (e.g., Pt, Pd) for catalytic CO oxidation. However, their practical application is hindered by insufficient low-temperature activity and rapid deactivation under wet conditions containing moisture. To address these challenges, this work introduces CeO 2 -modified CuO/MgO-Al 2 O 3 (Cu-Ce/MA) catalysts, strategically designed to enhance the catalytic performance and water resistance simultaneously. These catalytic materials were evaluated for CO oxidation under both dry and humid conditions, revealing that CeO 2 modification significantly improves the low-temperature activity. Specifically, the optimal catalyst, Cu-30Ce/MA, achieved a 50% CO conversion temperature (T 50 ) of 151 °C, a marked reduction from 218 °C on Cu/MA reference catalyst. Furthermore, the water resistance improves in a CeO 2 content-dependent manner, with higher CeO 2 loadings imparting greater stability in humid environments. Detailed characterizations demonstrate that CeO 2 promotes the dispersion of CuO and stabilizes Cu sites, while also enhancing the low-temperature reducibility and CO adsorption capacity. Crucially, CeO 2 modification suppresses the competitive H 2 O adsorption, mitigating water-induced deactivation. These synergistic effects collectively rationalize the superior activity and durability of Cu-Ce/MA catalysts. By elucidating the dual role of CeO 2 in optimizing Cu-based systems, this study advances the rational design of cost-effective catalysts for real-world CO emission control, particularly under water-rich industrial conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper-Based Catalysts Confined in Carbon Nanocage Reactors for Condensed Ester Hydrogenation: Tuning Copper Species by Confined SiO 2 and Methanol Resistance

Hydrogenation of aliphatic esters to natural alcohols is an important strategy for the efficient utilization of biomass-derived oils. The synthesis of highly active copper (Cu)-based catalysts is a challenge for condensed-phase ester hydrogenation due to the difficulties in controlling active sites and catalyst deactivation. In this work, a copper-based catalyst confined in a carbon nanocage reactor was successfully designed and prepared. The copper catalyst with 56 wt % SiO 2 exhibited the best performance because of the optimum proportion of Cu + and Cu 0 sites and high dispersion. The interaction between SiO 2 and Cu particles contributes to the formation of Cu + species, which is the key site for the adsorption of carbonyl groups. Meanwhile, the confinement effect of the carbon nanocages effectively inhibited the agglomeration of the copper particles. The catalysts exhibited not only excellent thermal stability but also superior methanol resistance in comparison with the Cu/SiO 2 catalyst. On the basis of the density functional theory (DFT) calculations results, methanol resistance should be attributed to the fewer hydroxyl groups on the catalyst surface, which increase the activation barrier for the dissociation of silica, allowing the stable holding of the copper species in the methanol solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fleetite, Cu 2 RhIrSb 2 , a New Species of Platinum-Group Mineral from the Miass Placer Zone, Southern Urals, Russia

Fleetite, Cu 2 RhIrSb 2 , a new species of platinum-group mineral (PGM), was discovered intergrown with an Os–Ir–Ru alloy in the Miass Placer Zone (Au–PGE), southern Urals, Russia. A single grain 50 μm across was found. Osmium, ruthenium, and iridium are the main associated minerals; also present are Pt–Fe alloys, laurite, Sb-rich irarsite, Rh-rich tolovkite, kashinite, anduoite, ferronickelplatinum, heazlewoodite, PGE-bearing pentlandite and digenite, as well as micrometric inclusions of forsterite (Fo 93.7 ), chromite–magnesiochromite, and Mg-rich edenite. In reflected light, fleetite is light gray; it is opaque, isotropic, non-pleochroic, and non-bireflectant. We report reflectance values measured in air. A mean of seven point-analyses (wavelength-dispersive spectrometry) gave Cu 13.93, Ni 8.60, Fe 0.10, Ir 28.07, Rh 7.91, Ru 1.96, Sb 39.28, total 99.85 wt.%, corresponding to (Cu 1.41 Ni 0.58 Fe 0.01 ) Σ2.00 (Rh 0.49 Ni 0.36 Ru 0.12 ) Σ0.97 Ir 0.95 Sb 2.08 on the basis of six atoms per formula unit, taking into account the structural results. The calculated density is 10.83 g/cm 3 . Single-crystal X-ray studies show that fleetite is cubic, space group Fdm (#227), a = 11.6682(8) Å, V = 1588.59(19) Å 3 , and Z = 16. A least-squares refinement of X-ray powder-diffraction data gave a = 11.6575(5) Å and V = 1584.22(19) Å 3 . The strongest five reflections in the powder pattern [d in Å(I)(hkl)] are: 6.70(75)(111), 4.13(100)(220), 3.52(30)(311), 2.380(50)(422), 2.064(40)(440). Results of synchrotron micro-Laue diffraction experiments are consistent [a = 11.66(2) Å]. The crystal structure of fleetite was solved and refined to R = 0.0340 based upon 153 reflections with F o > 4σ(F o ). It is isotypic with Pd 11 Bi 2 Se 2 and best described as intermetallic, with all metal atoms in 12-fold coordination. Fleetite and other late exotic phases were formed by reaction of the associated alloy phases with a fluid phase enriched in Sb, As, and S in circulation in the cooling ophiolite source-rock. The mineral is named after Michael E. Fleet (1938–2017) in recognition of his significant contributions to the Earth Sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface facet dependence of competing alloying mechanisms

Metal alloys are ubiquitous in many branches of heterogeneous catalysis, and it is now fairly well established that the local atomic structure of an alloy can have a profound influence on its chemical reactivity. While these effects can be difficult to probe in nanoparticle catalysts, model studies using well defined single crystal surfaces alloyed with dopants enable these structure–function correlations to be drawn. The first step in this approach involves understanding the alloying mechanism and the type of ensembles formed. In this study, we examined the atomic structure of RhCu single-atom alloys formed on Cu(111), Cu(100), and Cu(110) surfaces. Our results show a striking difference between Rh atoms alloying in Cu(111) vs the more open Cu(100) and Cu(110) surface facets. Unlike Cu(111) on which Rh atoms preferentially place-exchange with Cu atoms in the local regions above step edges leaving the majority of the Cu surface free of Rh, highly dispersed, homogeneous alloys are formed on the Cu(100) and (110) surfaces. These dramatically different alloying mechanisms are understood by quantifying the energetic barriers for atomic hopping, exchange, swapping, and vacancy filling events for Rh atoms on different Cu surfaces through theoretical calculations. Density functional theory results indicate that the observed differences in the alloying mechanism can be attributed to a faster hopping rate, relatively high atomic exchange barriers, and stronger binding of Rh atoms in the vicinity of step edges on Cu(111) compared to Cu(110) and Cu(100). Furthermore, these model systems will serve as useful platforms for examining structure sensitive chemistry on single-atom alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Activity of an Ensemble of Sites for CO 2 Hydrogenation to Methanol on a ZrO 2 -on-Cu Inverse Catalyst

The significant increase in CO 2 emissions from heavy fossil fuel utilization has raised serious concerns, highlighting the need for effective methods to convert CO 2 into value-added chemicals. Here, in this work, we report a computational investigation on the catalytic activity of ZrO 2 -on-Cu inverse catalysts for CO 2 hydrogenation to methanol, considering highly dispersed ZrO 2 trimers on Cu (111). Such clusters present a large ensemble of formate-containing configurations, Zr 3 O n (OH) m (OCHO) l , making the evaluation of the catalytic activity very challenging. We found that the sites on the various catalyst configurations exhibit markedly different activities for formate hydrogenation, despite their similar free energy and composition. To understand these differences in reactivity, we examined the structural and electronic nature of the low free-energy catalyst configurations and identified that the energy of the lowest unoccupied orbital of the reacting formate, modified by its binding with the catalytic site, is a descriptor for the reaction energy of the formate hydrogenation step. From there, we screened an ensemble of catalyst structures using this descriptor to predict highly active metastable catalyst configurations and computed the reaction pathways and transition states for formate hydrogenation. From this investigation, we distinguished reactive from nonreactive sites and formate species on the ZrO 2 /Cu inverse catalyst based on structural and electronic features. We showed that rare metastable configurations control the activity. Additionally, an efficient method for examining the reactivity of a large number of coexisting catalyst structures was developed.

catalysts↗

Rapidly solidifying Pb-free Sn-Ag-Cu-Al or Sn-Cu-Al solder

A solder alloy includes Sn, optional Ag, Cu, and Al wherein the solder alloy composition together with the solder alloy superheat temperature and rapid cooling rate from the superheat temperature are controlled to provide a dispersion of fine hard Cu—Al intermetallic particles in an as-solidified solder alloy microstructure wherein the particles are retained even after multiple solder reflow cycles often used in modern electronic assembly procedures to provide a particle strengthening to the solder joint microstructure as well as exert a grain refining effect on the solder joint microstructure, providing a strong, impact- and thermal aging-resistant solder joint that has beneficial microstructural features and is substantially devoid of Ag3Sn blades.

36 MATERIALS SCIENCE↗

Direct Observation of Ammonia Storage in UiO-66 Incorporating Cu(II) Binding Sites

The presence of active sites in metal–organic framework (MOF) materials can control and affect their performance significantly in adsorption and catalysis. However, revealing the interactions between the substrate and active sites in MOFs at atomic precision remains a challenging task. Here, we report the direct observation of binding of NH 3 in a series of UiO-66 materials containing atomically dispersed defects and open Cu(I) and Cu(II) sites. While all MOFs in this series exhibit similar surface areas (1111–1135 m 2 g –1 ), decoration of the -OH site in UiO-66-defect with Cu(II) results in a 43% enhancement of the isothermal uptake of NH 3 at 273 K and 1.0 bar from 11.8 in UiO-66-defect to 16.9 mmol g –1 in UiO-66-Cu II . A 100% enhancement of dynamic adsorption of NH 3 at a concentration level of 630 ppm from 2.07 mmol g –1 in UiO-66-defect to 4.15 mmol g –1 in UiO-66-Cu II at 298 K is observed. In situ neutron powder diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, and infrared spectroscopies, coupled with modeling reveal that the enhanced NH 3 uptake in UiO-66-Cu II originates from a {Cu(II)···NH 3 } interaction, with a reversible change in geometry at Cu(II) from near-linear to trigonal coordination. This work represents the first example of structural elucidation of NH 3 binding in MOFs containing open metal sites and will inform the design of new efficient MOF sorbents by targeted control of active sites for NH 3 capture and storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of aviation biofuel precursors from biomass-derived ketones: Substrate adsorption configuration-catalytic activity

The production of aviation biofuel precursors from biomass-derived ketones by heterogeneous catalysis has been hindered by the low catalytic activity. Herein, a series of Cu-doped metal oxide catalysts were prepared for the conversion of biomass-derived ketones to aviation biofuel precursors. Solvent-free cyclopentanone conversion via aldol condensation reached 91.1 % over Cu/Al 2 O 3 with 100 % selectivity toward dimer and trimer oxygenated species, all of which are aviation biofuel precursors. This catalyst primarily contains Cu 2 O and Cu nanoparticles which are uniformly dispersed across the Al 2 O 3 surface. From in situ DRIFTS and DFT results, the incorporation of Cu species onto Al 2 O 3 not only increased the diversity of Lewis acidic sites, but also changed the adsorption of C = O groups, which lead to the increased aldol condensation activity of Cu/Al 2 O 3 . In conclusion, this study provides insight on the design of heterogeneous catalysts suitable for the solvent-free synthesis of aviation biofuel precursors from biomass-derived ketones.

Adsorption configuration↗