SEARCH · Search NASA

Results for “Cu impurities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2010

Fiber-Based Measurement of Bow-Shock Spectra for Reentry Flight Testing

We demonstrated a fiber-based approach for obtaining optical spectra of a glowing bow shock in a high-enthalpy air flow. The work was performed in a ground test with the NASA Ames Aerodynamic Heating Facility (AHF) that is used for atmospheric reentry simulation. The method uses a commercial fiber optic that is embedded in the nose of an ablating bluntbody model and provides a line-of-sight view in the streamwise direction - directly upstream into the hot post-shock gas flow. Both phenolic impregnated carbon ablator (PICA) and phenolic carbon (PhenCarb 28) materials were used as thermal protection systems. Results show that the fibers survive the intense heat and operate sufficiently well during the first several seconds of a typical AHF run (20 MJ/kg). This approach allowed the acquisition of optical spectra, enabling a Boltzmann-based electronic excitation temperature measurement from Cu atom impurities (averaged over a line-of-sight through the gas cap, with a 0.04 sec integration time).

Schott, Timothy D.↗

DOE OSTI2021

Measurement of electronic structure and surface reconstruction in the superionic Cu 2-x Te

Recently, layered copper chalcogenides Cu 2 X family (X=S, Se, Te) has attracted tremendous research interests due to their high thermoelectric performance, which is partly due to the superionic behavior of mobile Cu ions, making these compounds "phonon liquids."Here, we systematically investigate the electronic structure and its temperature evolution of the less studied single crystal Cu 2-x Te by the combination of angle resolved photoemission spectroscopy (ARPES) and scanning tunneling microscope/spectroscopy (STM/STS) experiments. While the band structure of the Cu 2-x Te shows agreement with the calculations, we clearly observe a 2×2 surface reconstruction from both our low temperature ARPES and STM/STS experiments which survives up to room temperature. Interestingly, our low temperature STM experiments further reveal multiple types of reconstruction patterns, which suggests the origin of the surface reconstruction being the distributed deficiency of liquidlike Cu ions. Our findings reveal the electronic structure and impurity level of Cu 2 Te, which provides knowledge about its thermoelectric properties from the electronic degree of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Engineering Evaluation of Barium Buildup in a Decayed CsCl Sealed Source and Potential Impact for Cesium Release from a Breached Source

For more than 50 years, radioactive 137 Cs has been a major source material for radioactive sealed sources, usually constructed as cesium chloride (CsCl) salt loaded into double-walled, stainless-steel capsules. A complication develops as 137 Cs decays to 137 Ba since this process creates a strongly reducing environment inside the capsule. A potential hazard exists if the capsule is breached and air ingress induces rapid exothermic oxidation, and this mechanism is suspected to be responsible for the well-known contamination incident at the Harbor View facility in Washington state. For this study, many thermodynamic evaluations were performed to assess the internal state of capsules after several decades of decay and to describe the potential oxidation if the capsule contents were to suddenly be exposed to air. Results suggest that reduction of impurities such as Cu, Fe, Pb, and Cr to metal will occur. If these impurities are lacking, it is possible that even Ba metal will form. In most cases, rapid oxidation can occur, and the exothermic reactions are sufficient to vaporize portions of the contents, which would include the remaining 137 Cs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Quasi-One-Dimensional Spin Excitations in the Iron Pnictide NaFe 0.53 ⁢Cu 0.47 ⁢As

Spectroscopic measurements in model 1D correlated systems offer insights for understanding their two-dimensional counterparts, which include the cuprate and iron pnictide/chalcogenide superconductors. A major challenge is the identification of such correlated systems with dominantly 1D physics. Here, in this Letter, inelastic neutron scattering measurements on NaFe 0.53⁢ Cu 0.47 ⁢As single crystal directly reveal quasi-1D spin excitations, resulting from atomic order that leads to magnetic Fe and nonmagnetic Cu chains. The dominant exchange interaction is antiferromagnetic along the chain [𝑆⁢𝐽 ∥ ≈ 90.1⁢(3) meV], whereas the inter-chain couplings are much weaker [𝑆⁢𝐽 ⊥ ≈ −2.4⁢(1) meV and 𝑆⁢𝐽 c ≈ 0.15⁢(5) meV]. The quasi-1D spin excitations in NaFe 0.53 ⁢Cu 0.47⁢ As stem from both the Néel and stripe vectors, with Néel excitations sensitive to Fe impurities on the Cu site. The spin excitations in quasi-1D NaFe 0.53 ⁢Cu 0.47⁢ As and quasi-2D FeSe exhibit a striking resemblance, suggesting a common origin for their coexistent stripe and Néel excitations. Our findings demonstrate magnetic dilution in NaFeAs leads to dimension reduction of its magnetic degree of freedom, presenting a strategy for discovering low-dimensional quantum materials.

Wang, Yifan [Zhejiang Univ., Hangzhou (China)]↗

DOE OSTI2024

Sensitization and Mechanical Response of Cu‐Containing Steel Rods

The iron and steel manufacturing sector significantly adds to global greenhouse gas emissions, caused primarily by the carbothermic reduction of iron ore. Recycling scrap steel offers an effective decarbonization strategy but introduces impurities like copper (Cu) that can negatively impact mechanical properties. This study investigates the effects of Cu content and heat treatment on the mechanical performance and sensitization of steel wire rods for tire manufacturing. Steel rods with 0.04 and 0.21 wt% Cu are heated to 1050 or 1200 °C, then air quenched, or furnace cooled. Tensile testing coupled with microscopic analysis is used to evaluate mechanical properties and assess the sensitization effects. Higher Cu content leads to larger sensitized zones with increased Cu precipitation along grain boundaries. Ductility and toughness, crucial for wire drawability, are found to be reduced, despite higher ultimate strength. Slower furnace cooling is seen to result in smaller sensitized zones compared to air quenching, suggesting a pivotal role of cooling rate in sensitization control. The findings provide insights into optimize heat treatment parameters and Cu content limits, balancing mechanical performance and maintaining drawability for enhanced scrap steel recycling in tire production.

copper↗

DOE OSTI2024

Predicting Li-ion Battery Performance for Impurity-doped NMC Cathodes Using Deep Learning

With the electric vehicle (EV) market expansion and the energy sector's shift towards electrification, the demand for battery metals, including lithium (Li), cobalt (Co), and nickel (Ni), is set to surpass supply. A critical knowledge gap exists in the purity standards for battery precursors and the impact of impurities on battery performance. Addressing this, our study employs a Deep Machine Learning (DL) based multi-objective optimization approach to interpret the relationship between metal impurities in domestic battery resources and their effects on battery performance. We analyze experimental data from Li-ion batteries with NMC (Nickel-Manganese-Cobalt oxide) cathodes over 1000 cycles, representing approximately ~6-8 months of operation, to establish a baseline of performance without impurities. Leveraging this data, we develop a Physics-Informed Deep Learning (PIDL) framework to extend our findings to cases that include metal impurities (e.g., Fe, Cu, Al) ranging from (0.001 - 0.01) %, respectively. By incorporating physics-based features, our PIDL model can accurately estimate the performance of NMC cathodes doped with various metal impurities to provide rapid design decisions. This research paves the way for informed decisions in Li-ion battery material design and optimization, ensuring the sustainable growth of the EV market and the broader energy sector.

25 ENERGY STORAGE↗

DOE OSTI2023

Thermodynamic Understanding of Impurity Phase Segregation in a PdCrO 2 /CuCrO 2 Heterostructure

Abstract PdCrO 2 films are synthesized on CuCrO 2 buffer layers on Al 2 O 3 substrates. This synthesis is accompanied by impurity phase segregation, which hampers the synthesis of high quality PdCrO 2 films. Potential causes ofth impurity phase segregation are studied by using a combination of experiments and ab initio calculations. X‐ray diffraction and scanning transmission electron microscopy experiments reveal impurity phases of Cu x Pd 1 − x alloy and chromium oxides, Cr 2 O 3 and Cr 3 O 4 , in PdCrO 2 . Calculations determine that oxygen deficiency can cause the impurity phase segregation. Therefore, preventing oxygen release from delafossites can suppress the impurity phase segregation. The amounts of Cr 2 O 3 and Cr 3 O 4 depend on temperature and oxygen partial pressure. A reasonable theory‐based explanation for this experimental observation is provided.

2D metal↗

DOE OSTI2026

Electrochemical behavior of SnCl 2 and influence of Cu and Ni ions in molten LiCl−KCl−CaCl 2 eutectic

Reliable transport and thermodynamic data for multivalent ions in complex molten salts are scarce, limiting model fidelity for electrorefining and impurity control. Here, we report a comprehensive electrochemical characterization of SnCl₂ in LiCl–KCl–CaCl₂ (50.5–44.2–5.3 mol%) at 685 K, including the effects of Ni 2+ and Cu + impurities. Using cyclic voltammetry (CV), chronoamperometry (CA), and chronopotentiometry (CP), we quantified Sn 2+ and Ni 2+ diffusion with exceptional agreement across methods: Sn 2+ averaged (1.03 ± 0.10) × 10 −5 cm 2 s −1 , and Ni 2+ averaged (0.75 ± 0.19) × 10 −5 cm 2 s −1 . The tight confidence-interval overlap across CV, CA, and CP strengthens confidence in these values and is uncommon in molten chloride studies. Open-circuit-potential measurements provided standard apparent reduction potentials that closely match LiCl–KCl literature, indicating minimal shift with CaCl₂ present. The Sn 2+ /Sn couple behaves as a reversible two-electron soluble–insoluble process at 685 K; the Sn 4+ /Sn 2+ couple transitions to soluble–soluble behavior near 788 K, which may correlate with the decomposition of surface bound chlorostannates, though direct characterization remains to be established. In mixed systems, Cu+/Cu overlaps Sn 2+ /Sn, limiting Cusingle bondSn electroseparation, whereas the larger potential gap between Ni 2+ /Ni and Sn 2+ /Sn supports selective Ni removal. These internally consistent transport and thermodynamic data establish a validated basis for process modeling and optimization of Sn electrorefining and impurity management in LiCl–KCl–CaCl₂.

Berzins-Delahay↗

NASA NTRS1990

Elemental fractionation and magnetic properties of melt-based Y1Ba2Cu3Oz containing excess Tb or Pt

Scanning electron microscopy of certain partially melted Y-Ba-Cu-O materials containing minority metal oxide species (Y:Tb:Ba:Cu = 1:0.1:2:3 or Y:Ba:Cu with Pt impurities), accompanied by both EDX and EMP analysis, indicates that the minority species (Tb or Pt) is quantitatively concentrated in a relatively small number of 123-type grains. High magnetic susceptibility and magnetization observed for these materials indicate that such elemental distribution is not detrimental to superconducting behavior.

Hojaji, Hamid↗

NASA NTRS1995

Bulk Properties of Ni3Al(gamma') With Cu and Au Additions

The BFS method for alloys is applied to the study of 200 alloys obtained from adding Cu and Au impurities to a Ni3Al matrix. We analyze the trends in the bulk properties of these alloys (heat of formation, lattice parameter, and bulk modulus) and detect specific alloy compositions for which these quantities have particular values. A detailed analysis of the atomic interactions that lead to the preferred ordering patterns is presented.

Bozzolo, Guillermo↗

NASA NTRS1996

New Theoretical Technique Developed for Predicting the Stability of Alloys

When alloys are being designed for aeronautical and other applications, a substantial experimental effort is necessary to make incremental changes in the desired alloy properties. A scheme to narrow the field to the most promising candidates would substantially reduce the high cost of this experimental screening. Such a method for determining alloy properties, called the BFS (Bozzolo, Ferrante, and Smith) method, has been developed at the NASA Lewis Research Center. This method was used to calculate the thermal stability and mechanical strength of 200 alloys of Ni3Al, with Cu and Au impurities forming ternary and quaternary compounds. With recent advances in the method, almost any metallic impurity and crystal structure can be addressed. In addition, thermal effects can be addressed with Monte Carlo techniques. At present, an experimental program is in progress to verify these results. The method identified a small number of the most promising candidates from the 200 alloys with the largest negative heat of formation and the highest bulk modulus. This calculation required only 5 min of CPU time on a VAX computer. It is clear that semi-empirical methods have achieved the level of development and reliability to warrant examining this new approach to the problem of alloy design. The present work was meant to demonstrate, perhaps in a rather simple way, this power. This type of application of atomistic simulation methods can narrow the gap and improve the feedback between theoretical predictions and laboratory experimentation.

Source record↗

NASA NTRS1978

Characterization of the effects of metallic impurities on silicon solar cell performance

The effects of controlled concentrations of secondary impurities (Al, C, Ca, Cr, Cu, Fe, Mg, Mn, Mo, Ta, Ti, V, Zn, and Zr), incorporated alone or in combinations into Czochralski and float zone crystals, on the performance of silicon solar cells were investigated. Impurity concentrations ranged from 10 to the 11th to 10 to the 17th/cu cm. Solar cells were fabricated by a conventional diffusion process and characterized by computer reduction of current-voltage data. The data suggest that performance loss primarily results from reduction of the base diffusion length. On the basis of this assumption, a first order analytic model which predicts cell performance as a function of impurity concentrations is developed. Calculated performance parameters are in good agreement with observation, except for some impurities, such as Fe, Cu and Ni, which degrade cells via recombination and defects in the junction space-charge region. N-base devices are less affected by impurities, although degradation mechanisms appear to be the same as in p-devices. There seems to be very limited interaction between impurities in multiply-doped cells.

Davis, J. R.↗

NASA NTRS1988

Tunneling effects in the current-voltage characteristics of high-efficiency GaAs solar cells

Evidence is that tunneling via states in the forbidden gap is the dominant source of excess current in the dark current-voltage (I-V) characteristics of high-efficiency DMCVD grown Al(x)Ga(1-x)As/GaAs(x is equal to or greater than 0.85) solar cells. The dark forward and reverse I-V measurements were made on several solar cells, for the first time, at temperatures between 193 and 301 K. Low-voltage reverse-bias I-V data of a number of cells give a thermal activation energy for excess current of 0.026 + or - 0.005 eV, which corresponds to the carbon impurity in GaAs. However, other energy levels between 0.02 eV and 0.04 eV were observed in some cells which may correspond to impurity levels introduced by Cu, Si, Ge, or Cd. The forward-bias excess current is mainly due to carrier tunneling between localized levels created in the space-charge layer by impurities such as carbon, which are incorporated during the solar cell growth process. A model is suggested to explain the results.

Kachare, R.↗

NASA NTRS1976

The effect of secondary impurities on solar cell performance

Czochralski and float zone sigle crystals of silicon were doped with the primary impurities B or P so that a resistivity of 0.5 ohm cm resulted, and in addition doped with certain secondary impurities including Al, C, Cr, Cu, Fe, Mg, Mn, Na, Ni, O, Ti, V, and Zr. The actual presence of these impurities was confirmed by analysis of the crystals. Solar cell performance was evaluated and found to be degraded most significantly by Ti, V, and Zr and to some extent by most of the secondary impurities considered. These results are of significance to the low cost silicon program, since any such process would have to yield at least tolerable levels of these impurities.

Hill, D. E.↗

NASA NTRS1996

Characterization of zinc selenide single crystals

ZnSe single crystals of high quality and low impurity levels are desired for use as substrates in optoelectronic devices. This is especially true when the device requires the formation of homoepitaxial layers. While ZnSe is commercially available, it is at present extremely expensive due to the difficulty of growing single crystal boules with low impurity content and the resultant low yields. Many researchers have found it necessary to heat treat the crystals in liquid Zn in order to remove the impurities, lower the resistivity and activate the photoluminescence at room temperature. The physical vapor transport method (PVT) has been successfully used at MSFC to grow many single crystals of II-VI semiconducting materials including ZnSe. The main goal at NASA has been to try to establish the effect of gravity on the growth parameters. To this effect, crystals have been grown vertically upwards or horizontally. Both (111) and (110) oriented ZnSe crystals have been obtained via unseeded PVT growth. Preliminary characterization of the horizontally grown crystals has revealed that Cu is a major impurity and that the low temperature photoluminescence spectra is dominated by the copper peak. The ratio of the copper peak to the free exciton peak is being used to determine variations in composition throughout the crystal. It was the intent of this project to map the copper composition of various crystals via photoluminescence first, then measure their electrical resistivity and capacitance as a function of frequency before proceeding with a heat treatment designed to remove the copper impurities. However, equipment difficulties with the photoluminescence set up, having to establish a procedure for measuring the electrical properties of the as-grown crystals and time limitations made us re-evaluate the project goals. Vertically grown samples designated as ZnSe-25 were chosen to be measured electrically since they were not expected to show as much variation in their composition through their cross-section as the horizontally grown samples.

Gerhardt, Rosario A.↗

NASA NTRS1984

Coaxial carbon plasma gun deposition of amorphous carbon films

A unique plasma gun employing coaxial carbon electrodes was used in an attempt to deposit thin films of amorphous diamond-like carbon. A number of different structural, compositional, and electrical characterization techniques were used to characterize these films. These included scanning electron microscopy, scanning transmission electron microscopy, X ray diffraction and absorption, spectrographic analysis, energy dispersive spectroscopy, and selected area electron diffraction. Optical absorption and electrical resistivity measurements were also performed. The films were determined to be primarily amorphous, with poor adhesion to fused silica substrates. Many inclusions of particulates were found to be present as well. Analysis of these particulates revealed the presence of trace impurities, such as Fe and Cu, which were also found in the graphite electrode material. The electrodes were the source of these impurities. No evidence of diamond-like crystallite structure was found in any of the film samples. Details of the apparatus, experimental procedure, and film characteristics are presented.

Sater, D. M.↗

DOE OSTI2020

Thallium Bromide Semiconductor Radiation Materials and Detectors Characterization Studies

Two overarching requirements of crucial importance for the commercial and scientific establishment of semiconductor radiation detectors are: (1) exceptionally high-purity crystals with impurity concentrations less than 1 part-per-billion and (2) single crystals that are relatively free from subgrain boundaries, secondary phases, dislocations, and other electrically-active defects. We investigated the properties of thallium bromide (TlBr) material that affect its performance with the goal of increasing the material's commercial viability for radiation detection applications. For this purpose, we used beamlines at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL), performing Micron-scale X-ray Detector Mapping, White Beam X-ray Diffraction Topography, and Micron-scale X-ray Fluorescence. These characterization methods improve the industry's understanding of TlBr and lead to the production of improved instrumentation. In this particular study we report electro-migration measurements of positive-ion Cu, Ag, and Au impurities in TlBr detectors under electric field strengths typically used for device operation. BNL improved TlBr detectors with an electrode design that corrects the response non-uniformities caused by crystal defects. This design can achieve improved energy resolution while using typical-grade, commercial crystals with relaxed quality requirements, thus reducing the overall cost of detectors. Additional characterization will be necessary to fully understand the structure and performance of TlBr with the ultimate goal to achieve the highest energy resolution. Our findings from past work will be presented along with our recommendations for additional investigation.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Supercritical Methanol Solvolysis and Catalysis for the Conversion of Delignified Woody Biomass into Light Alcohol Gasoline Bioblendstock

Supercritical methanol (SCM) solvolysis and catalysis has recently emerged as a promising pathway to produce gasoline-range light alcohols from woody biomass through staged depolymerization and hydro-deoxygenation (DHDO). Here, structure-property relationships of Cu"M"AlO x catalysts (M = Mg, Zr, and Ce) are examined for upgrading delignified hybrid poplar via SCM-DHDO. CuCeAlO x displays the highest activity, increasing the C 2 -C 7 alcohol production rate and selectivity by twofold in batch reactions, and >50% in semicontinuous reactions relative to the current state-of-the-art CuMgAlO x . The performance of CuCeAlOx is correlated with its high reducibility and acidity. Cu sintering and biogenic impurity poisoning are identified as possible deactivation mechanisms over 60 h of continuous testing. The gasoline-range SCM-DHDO products are comprised of primarily aliphatic alcohols that result in improved energy density and favorably reduced vapor pressure, relative to ethanol, with the tradeoff of nonsynergistic octane blending with conventional gasoline and lower oxidation stability. Overall, this work highlights the potential to produce suitable light oxygenates by SCM-DHDO processing for gasoline bioblendstock applications.

09 BIOMASS FUELS↗